summaryrefslogtreecommitdiffstats
path: root/drivers/dma/ti
AgeCommit message (Collapse)AuthorFilesLines
2020-09-11dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parametersPeter Ujfalusi1-7/+35
Use separate data for SoC dependent parameters. These parameters depends on the DMA integration (either in HW or in SYSFW), the DMA controller itself remains compatible with either the am654 or j721e variant. j7200 have the same DMA as j721e with different number of channels, which can be queried from HW, but SYSFW defines different rchan_oes_offset number for j7200 (0x80) compared to j721e (0x400). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200910124329.21206-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul1-5/+5
Linux 5.9-rc4
2020-09-03dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0Peter Ujfalusi1-2/+2
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support SR2. Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip update, we need to also update the am654 rchan_oes_offset. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: ti: k3-udma: Remove redundant is_slave_direction() checksPeter Ujfalusi1-10/+0
The direction has been already validated in the main callback and there is no need to check it again in the TR mode handlers for slave_sg and cyclic. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200824120120.9270-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sgPeter Ujfalusi1-3/+3
The TR which needs to be initialized for the next sg entry is indexed by tr_idx and not by the running i counter. In case any sub element in the SG needs more than one TR, the code would corrupt an already configured TR. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200824120108.9178-1-peter.ujfalusi@ti.com Fixes: 6cf668a4ef829 ("dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17dmaengine: ti: k3-psil-j721e: Add entries for 2nd port of MCU SA2ULPeter Ujfalusi1-0/+3
The security accelerator within MCU domain supports two ports similarly to the SA2UL in MAIN domain. Add endpoint configuration for the two ingress and one egress threads of the second port. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200803100724.19003-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17dmaengine: ti: k3-psil: add map for j7200Peter Ujfalusi4-1/+181
Add new PSI-L map file for the new TI j7200 SoC. The DMA hardware in j7200 is the same as in j721e with different set of peripherals resulting different PSI-L thread map compered to j721e. See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200803125713.17829-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17dmaengine: ti: k3-psil: Use soc_device_match to get the psil mapPeter Ujfalusi1-5/+13
Instead of separate of_machine_is_compatible() it is better to use soc_device_match() and soc_device_attribute struct to get the PSI-L map for the booted device. By using soc_device_match() it is easier to add support for new devices. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200803125713.17829-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17dmaengine: ti: omap-dma: Drop of_match_ptr to fix -Wunused-const-variableKrzysztof Kozlowski1-1/+1
The of_device_id is included unconditionally by of.h header and used in the driver as well. Remove of_match_ptr to fix W=1 compile test warning with !CONFIG_OF: drivers/dma/ti/omap-dma.c:1892:34: warning: 'omap_dma_match' defined but not used [-Wunused-const-variable=] 1892 | static const struct of_device_id omap_dma_match[] = { Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200728170939.28278-1-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-07Merge tag 'dmaengine-5.9-rc1' of ↵Linus Torvalds4-260/+205
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Other: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers" * tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits) dmaengine: dw: Don't include unneeded header to platform data header dmaengine: Actions: Add support for S700 DMA engine dmaengine: Actions: get rid of bit fields from dma descriptor dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml dmaengine: idxd: add missing invalid flags field to completion dmaengine: dw: Initialize max_sg_burst capability dmaengine: dw: Introduce max burst length hw config dmaengine: dw: Initialize min and max burst DMA device capability dmaengine: dw: Set DMA device max segment size parameter dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config dmaengine: Introduce DMA-device device_caps callback dmaengine: Introduce max SG burst capability dmaengine: Introduce min burst length capability dt-bindings: dma: dw: Add max burst transaction length property dt-bindings: dma: dw: Convert DW DMAC to DT binding dmaengine: ti: k3-udma: Query throughput level information from hardware dmaengine: ti: k3-udma: Use defines for capabilities register parsing dmaengine: xilinx: dpdma: Fix kerneldoc warning dmaengine: xilinx: dpdma: add missing kernel doc dmaengine: xilinx: dpdma: remove comparison of unsigned expression ...
2020-08-05Merge branch 'for-linus' into fixesVinod Koul4-260/+205
Signed-off-by: Vinod Koul <vkoul@kernel.org> Conflicts: drivers/dma/idxd/sysfs.c
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds2-52/+24
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-27Merge tag 'drivers_soc_for_5.9' of ↵Arnd Bergmann2-52/+24
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers SOC: TI Keystone driver update for v5.9 - TI K3 Ring Accelerator updates - Few non critical warining fixes * tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify soc: ti: k3: fix semicolon.cocci warnings soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring' dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair soc: ti: k3-ringacc: separate soc specific initialization soc: ti: k3-ringacc: add request pair of rings api. soc: ti: k3-ringacc: add ring's flags to dump soc: ti: k3-ringacc: Move state tracking variables under a struct dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-27dmaengine: ti: k3-udma: Query throughput level information from hardwarePeter Ujfalusi2-29/+30
The CAP3 register contains information about the number of HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP. Based on this information the start indexes of the levels can be calculated without a need of a table in the match data. On am654 the CAP3 does not contain information about the number different channels. Set up the tpl information based on the available documentation. This change will allow to use the same compatible for different SoCs where the only difference is the number of channel types. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-27dmaengine: ti: k3-udma: Use defines for capabilities register parsingPeter Ujfalusi2-6/+12
Add defines for the CAP register fields to make the code self explaining. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200717120903.8774-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-24dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pairPeter Ujfalusi2-52/+24
We only request ring pairs via K3 DMA driver, switch to use the new k3_ringacc_request_rings_pair() to simplify the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-07-15Merge tag 'dmaengine-fix-5.8-rc6' of ↵Linus Torvalds2-20/+20
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine into master Pull dmaengine fixes from Vinod Koul: - update dmaengine tree location to kernel.org - dmatest fix for completing threads - driver fixes for k3dma, fsl-dma, idxd, ,tegra, and few other drivers * tag 'dmaengine-fix-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (21 commits) dmaengine: ioat setting ioat timeout as module parameter dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu dmaengine: dmatest: stop completed threads when running without set channel dmaengine: fsl-edma-common: correct DSIZE_32BYTE dmaengine: dw: Initialize channel before each transfer dmaengine: idxd: fix misc interrupt handler thread unmasking dmaengine: idxd: cleanup workqueue config after disabling dmaengine: tegra210-adma: Fix runtime PM imbalance on error dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler dmaengine: fsl-edma: Add lockdep assert for exported function dmaengine: idxd: fix hw descriptor fields for delta record dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get() dmaengine: sh: usb-dmac: set tx_result parameters dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaround dmaengine: idxd: fix cdev locking for open and release dmaengine: imx-sdma: Fix: Remove 'always true' comparison MAINTAINERS: switch dmaengine tree to kernel.org dmaengine: ti: k3-udma: Fix the running channel handling in alloc_chan_resources dmaengine: ti: k3-udma: Fix cleanup code for alloc_chan_resources ...
2020-07-15dmaengine: ti: k3-udma: Use struct_size() in kzalloc()Gustavo A. R. Silva1-2/+2
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedor Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: ti: k3-udma: Use udma_chan instead of tchan/rchan for IO functionsPeter Ujfalusi1-85/+78
Move the uc->tchan/rchan checks to the IO wrappers itself instead of calling the functions with tchan/rchan directly. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: ti: k3-udma-private: Use udma_read/write for register accessPeter Ujfalusi1-2/+6
Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write), use the underlying register access functions directly. This will allow changes in the higher level wrappers within the DMAengine driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: ti: k3-udma: Use common defines for TCHANRT/RCHANRT registersPeter Ujfalusi3-139/+115
The register offsets and functions are the same among TCHAN and RCHAN. Use generic, common names for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: ti: k3-udma: Do not use ring_get_occ in udma_pop_from_ringPeter Ujfalusi1-15/+13
The ring_get_occ is redundant as the k3_ringacc_ring_pop() is also checking the occ of the ring. With removing the ring_get_occ, the function can be simplified as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200707102352.28773-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: ti: k3-udma: Remove dma_sync_single calls for descriptorsPeter Ujfalusi1-35/+2
The descriptors are allocated via wither dma_pool or dma_alloc_coherent. There is no need for the dma_sync_singel_* calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200707102352.28773-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()Yu Kuai1-0/+1
if of_find_device_by_node() succeed and platform_get_drvdata() failed, of_xudma_dev_get() will return without put_device(), which will leak the memory. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200618130110.582543-1-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaroundPeter Ujfalusi1-3/+1
INIT_DELAYED_WORK_ONSTACK() must be used with on-stack delayed work, which is not the case here. Use normal delayed_work for the channels instead. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200618114004.6268-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-16dmaengine: ti: k3-udma: Fix the running channel handling in alloc_chan_resourcesPeter Ujfalusi1-1/+1
In the unlikely case when the channel is running (RT enabled) during alloc_chan_resources then we should use udma_reset_chan() and not udma_stop() as the later is trying to initiate a teardown on the channel, which is not valid at this point. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200527070612.636-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-16dmaengine: ti: k3-udma: Fix cleanup code for alloc_chan_resourcesPeter Ujfalusi1-15/+16
Some of the earlier errors should be sent to the error cleanup path to make sure that the uchan struct is reset, the dma_pool (if allocated) is released and memcpy channel pairs are released in a correct way. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200527070612.636-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-16dmaengine: ti: k3-udma: Use correct node to read "ti,udma-atype"Peter Ujfalusi1-1/+1
The "ti,udma-atype" property is expected in the UDMA node and not in the parent navss node. Fixes: 0ebcf1a274c5 ("dmaengine: ti: k3-udma: Implement support for atype (for virtualization)") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200527065357.30791-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-15dmaengine: Replace zero-length array with flexible-arrayGustavo A. R. Silva2-2/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-10Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-27/+11
Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ...
2020-05-15dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resourcesPeter Ujfalusi1-0/+1
In udma_alloc_chan_resources() if the channel is not willing to stop then the function should return with error code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200512134519.5642-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cntPeter Ujfalusi1-15/+1
The in_ring_cnt is not used for anything, it can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200512134611.6015-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptorPeter Ujfalusi1-0/+3
The TR mode rx flush descriptor did not had a dma_sync_single_for_device() call to make sure that the DMA see the correct information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200512134544.5839-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpyPeter Ujfalusi1-2/+4
cppi5_tr_csf_set() clears previously set Configuration Specific Flags. Setting the EOP flag clears the SUPR_EVT flag for the last TR which is not desirable as we do not want to have events from the TR. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200512134531.5742-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify codeSamuel Zou1-9/+3
Fixes coccicheck warnings: drivers/dma/ti/k3-udma.c:1294:1-3: WARNING: PTR_ERR_OR_ZERO can be used drivers/dma/ti/k3-udma.c:1311:1-3: WARNING: PTR_ERR_OR_ZERO can be used drivers/dma/ti/k3-udma.c:1376:1-3: WARNING: PTR_ERR_OR_ZERO can be used Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1588757146-38858-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15dmaengine: ti: k3-udma: Disable memcopy via MCU NAVSS on am654Peter Ujfalusi1-1/+1
Trace of a test for DMA memcpy domains slipped into the glue layer commit. The memcpy support should be disabled on the MCU UDMAP. Fixes: d702419134133 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200327144228.11101-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15dmaengine: ti: k3-psil: fix deadlock on error pathGrygorii Strashko1-0/+1
The mutex_unlock() is missed on error path of psil_get_ep_config() which causes deadlock, so add missed mutex_unlock(). Fixes: 8c6bb62f6b4a ("dmaengine: ti: k3 PSI-L remote endpoint configuration") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200408185501.30776-1-grygorii.strashko@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15dmaengine: ti: k3-udma: Drop COMPILE_TEST for the drivers for nowPeter Ujfalusi1-2/+2
It is not possible to compile test the UDMA stack right now due to dependencies to T_SCI_PROTOCOL and TI_SCI_INTA_IRQCHIP and their dependencies. Remove the COMPILE_TEST until it is actually possible to compile test the drivers. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20200403141950.9359-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-02Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds5-17/+203
Pull dmaengine updates from Vinod Koul: "Core: - Some code cleanup and optimization in core by Andy - Debugfs support for displaying dmaengine channels by Peter Drivers: - New driver for uniphier-xdmac controller - Updates to stm32 dma, mdma and dmamux drivers and PM support - More updates to idxd drivers - Bunch of changes in tegra-apb driver and cleaning up of pm functions - Bunch of spelling fixes and Replace zero-length array patches - Shutdown hook for fsl-dpaa2-qdma driver - Support for interleaved transfers for ti-edma and virtualization support for k3-dma driver - Support for reset and updates in xilinx_dma driver - Improvements and locking updates in at_hdma driver" * tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dt-bindings: dma: renesas,usb-dmac: add r8a77961 support dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq dmaengine: tegra-apb: Improve DMA synchronization dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler dmaengine: tegra-apb: mark PM functions as __maybe_unused dmaengine: fix spelling mistake "exceds" -> "exceeds" dmaengine: sprd: Set request pending flag when DMA controller is active dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow dmaengine: idxd: remove global token limit check dmaengine: idxd: reflect shadow copy of traffic class programming dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc dmaengine: Create debug directories for DMA devices dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs dmaengine: Add basic debugfs support dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma' dmaengine: ti: edma: fix null dereference because of a typo in pointer name dmaengine: fsl-dpaa2-qdma: Adding shutdown hook dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver dt-bindings: dmaengine: Add UniPhier external DMA controller bindings dmaengine: ti: k3-udma: Implement support for atype (for virtualization) ...
2020-03-23dmaengine: ti: k3-udma-glue: Fix an error handling path in ↵Christophe JAILLET1-10/+19
'k3_udma_glue_cfg_rx_flow()' All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()' function 'goto err' and call 'k3_udma_glue_release_rx_flow()'. This not correct because this function has a 'channel->flows_ready--;' at the end, but 'flows_ready' has not been incremented here, when we branch to the error handling path. In order to keep a correct value in 'flows_ready', un-roll 'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch at the correct places when an error is detected. Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200318191209.1267-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfsPeter Ujfalusi1-0/+63
With the custom dbg_summary_show the driver can show useful information about the used channels. dma0 (285c0000.dma-controller): number of channels: 24 dma1 (31150000.dma-controller): number of channels: 84 dma1chan0 | 2b00000.mcasp:tx (MEM_TO_DEV, tchan16 [0x1010 -> 0xc400], PDMA[ ACC32 BURST ], TR mode) dma1chan1 | 2b00000.mcasp:rx (DEV_TO_MEM, rchan16 [0x4400 -> 0x9010], PDMA[ ACC32 BURST ], TR mode) dma1chan2 | 2ba0000.mcasp:tx (MEM_TO_DEV, tchan17 [0x1011 -> 0xc507], PDMA[ ACC32 BURST ], TR mode) dma1chan3 | 2ba0000.mcasp:rx (DEV_TO_MEM, rchan17 [0x4507 -> 0x9011], PDMA[ ACC32 BURST ], TR mode) dma1chan4 | in-use (MEM_TO_MEM, chan0 pair [0x1000 -> 0x9000], PSI-L Native, TR mode) dma1chan5 | in-use (MEM_TO_MEM, chan1 pair [0x1001 -> 0x9001], PSI-L Native, TR mode) dma1chan6 | in-use (MEM_TO_MEM, chan4 pair [0x1004 -> 0x9004], PSI-L Native, TR mode) dma1chan7 | in-use (MEM_TO_MEM, chan5 pair [0x1005 -> 0x9005], PSI-L Native, TR mode) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200306142839.17910-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-02dmaengine: ti: edma: fix null dereference because of a typo in pointer nameColin Ian King1-1/+1
Currently there is a dereference of the null pointer m_ddev. This appears to be a typo on the pointer, I believe s_ddev should be used instead. Fix this by using the correct pointer. Fixes: eb0249d50153 ("dmaengine: ti: edma: Support for interleaved mem to mem transfer") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Addresses-Coverity: ("Explicit null dereferenced") Link: https://lore.kernel.org/r/20200226185921.351693-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-02dmaengine: ti: k3-udma: Implement support for atype (for virtualization)Peter Ujfalusi2-10/+58
The DT for virtualized hosts have dma-cells == 2 where the second parameter is the ATYPE for the channel. In case of dma-cells == 1 we can configure the ATYPE as 0 (reset value). The ATYPE defined for j721e are: 0: pointers are physical addresses (no translation) 1: pointers are intermediate addresses (PVU) 2: pointers are virtual addresses (SMMU) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200218143126.11361-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: ti: edma: Support for interleaved mem to mem transferPeter Ujfalusi1-0/+79
Add basic interleaved support via EDMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200210094455.3615-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Fix terminated transfer handlingPeter Ujfalusi1-14/+15
When we receive back the descriptor of the terminated transfer the cookie must be marked as completed to make sure that the accounting is correct. In udma_tx_status() the status should be marked as completed if the channel is no longer running (it can only happen if the channel is not yet started for the first time, or after a channel termination). Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-7-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use the channel direction in pause/resume functionsPeter Ujfalusi1-9/+3
It should be possible to pause, resume and check the pause state of a channel even if we do not have active transfer. udma_is_chan_paused() can trigger NULL pointer reference in it's current form when the status is checked while uc->desc is NULL. Fixes: 25dcb5dd7b7ce ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclicPeter Ujfalusi1-42/+88
Use the generic TR setup function to get the TR counters for both cyclic and slave_sg transfers. This way the period_size for cyclic and sg_dma_len() for slave_sg can be as large as (SZ_64K - 1) * (SZ_64K - 1) and we can handle cases when the length is >SZ_64K and a prime number. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Move the TR counter calculation to helper functionPeter Ujfalusi1-23/+51
Move the TR counter parameter configuration code out from the prep_memcpy callback to a helper function to allow a generic re-usable code for other TR based transfers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peerPeter Ujfalusi1-17/+151
When a channel is asked to be stopped (teardown) and we do not have active descriptor to receive stale data buffered on the remote side then the teardown will not complete as UDMA needs a descriptor to be able to flush out the DMA pipe. The peer is trying to push the data to UDMA in teardown, but UDMA is pushing back because it has no descriptor which would allow it to drain the data. The workaround is to create 1K 'trashcan' to receive the discarded data and set up descriptors for packet and TR mode channels. When a channel is stopped and there is no active descriptor then a descriptor is pushed to the ring for UDMA before the teardown is initiated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-19dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion checkVignesh Raghavendra1-27/+53
In some cases (McSPI for example) the jiffie and delayed_work based workaround can cause big throughput drop. Switch to use ktime/usleep_range based implementation to be able to sustain speed for PDMA based peripherals. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200214091441.27535-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 02:08:04 +0000