| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi
uart can fail for the first open of the uart unless connected using
a hub.
This is because the first dma call done by musb_ep_program() must wait
if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues
with other non-dma packets before the DMA transfer is started causing at
least ftdi uarts to fail to receive data.
Let's fix the issue by waking up cppi41 with PM runtime calls added to
cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we
have musb_ep_program() continue with PIO until cppi41 is awake.
Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v4.9+
Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver defines three states for a cppi channel.
- idle: .chan_busy == 0 && not in .pending list
- pending: .chan_busy == 0 && in .pending list
- busy: .chan_busy == 1 && not in .pending list
There are cases in which the cppi channel could be in the pending state
when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
is called.
cppi41_stop_chan() has a bug for these cases to set channels to idle state.
It only checks the .chan_busy flag, but not the .pending list, then later
when cppi41_runtime_resume() is called the channels in .pending list will
be transitioned to busy state.
Removing channels from the .pending list solves the problem.
Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Bin Liu <b-liu@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Collect the Texas Instruments DMA drivers under drivers/dma/ti/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
