summaryrefslogtreecommitdiffstats
path: root/drivers/dma/ste_dma40.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-24dmaengine: ste_dma40: remove dma_slave_config direction usageVinod Koul1-6/+25
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-29dmaengine: ste_dma40: use dmaenginem_async_device_register to simplify the codeHuang Shijie1-9/+5
Use dmaenginem_async_device_register to simplify the code: remove dma_async_device_unregister. remove label unregister_slave, unregister_memcpy Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-02dmaengine: ste_dma40: Remove VLA usageKees Cook1-2/+13
In the quest to remove all stack VLA usage from the kernel[1], this switches to using a pre-allocated scratch register space, set up with all other other allocations. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-22dmaengine: ste_dma40: simplify getting .drvdataWolfram Sang1-8/+4
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2017-09-06Merge branch 'topic/dmatest' into for-linusVinod Koul1-18/+0
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang1-18/+0
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-21dmaengine: ste_dma40: make stedma40_chan_cfg constBhumika Goyal1-2/+2
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-01dmaengine: ste_dma40: Cleanup scatterlist layering violationsLogan Gunthorpe1-4/+1
This dma engine driver directly accesses page_link assuming knowledge that should be contained only in scatterlist.h. We replace this access with a call to sg_chain which is equivalent. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Per Förlin <per.forlin@axis.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-14dmaengine: ste_dma40: indicate granularity on channelsLinus Walleij1-0/+1
The ste_dma40 has burst level granularity on the residue registers, which is necessary for some clients to know, notably the UART. Before this patch we get this message: uart-pl011 80007000.uart: RX DMA disabled - no residue processing This patch fixes it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-14dmaengine: ste_dma40: indicate directions on channelsLinus Walleij1-2/+4
Since the introduction of the .directions flags, ste_dma40 was never patched to indicate which transfer directions it can manage. This causes a problem when trying to use the dmaengine for generic ALSA SoC DMA: ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 This patch fixes this issue by indicating the supported transfer directions for slave and memcpy channels. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-03Merge branch 'topic/ste_dma40' into for-linusVinod Koul1-131/+122
2016-10-03Merge branch 'topic/err_reporting' into for-linusVinod Koul1-6/+4
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Conflicts: drivers/dma/cppi41.c
2016-09-26ste_dma40: Rename a jump label in d40_log_lli_to_lcxa()Markus Elfring1-3/+2
Adjust a jump label according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in __d40_execute_command_phy()Markus Elfring1-2/+2
Adjust a jump label according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in dma_tasklet()Markus Elfring1-3/+2
Adjust a jump label according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename jump labels in d40_alloc_mask_set()Markus Elfring1-12/+10
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_alloc_mask_free()Markus Elfring1-3/+2
Adjust a jump label according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_free_dma()Markus Elfring1-3/+2
Adjust a jump label according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_is_paused()Markus Elfring1-4/+3
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Move an assignment in d40_prep_desc()Markus Elfring1-1/+2
Move one assignment for the local variable "cfg" so that its setting will only be performed after a call of the function "d40_desc_get" succeeded by this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_prep_desc()Markus Elfring1-4/+3
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Move two assignments in d40_prep_sg()Markus Elfring1-2/+4
Move assignments for two local variables so that their setting will only be performed after corresponding data processing succeeded by this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: One check less in d40_prep_sg() after error detectionMarkus Elfring1-6/+5
* Adjust jump targets according to the Linux coding style convention. * Delete a repeated check which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_alloc_chan_resources()Markus Elfring1-3/+3
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename jump labels in d40_dmaengine_init()Markus Elfring1-6/+6
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_probe()Markus Elfring1-13/+12
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Adjust the position of a jump label in d40_probe()Markus Elfring1-1/+1
Add a space character before a single jump label in this function according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Delete unnecessary variable initialisations in d40_hw_detect_init()Markus Elfring1-5/+5
Five local variables will be set to an appropriate value a bit later. Thus omit the explicit initialisation which became unnecessary with a previous update step. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Less checks in d40_hw_detect_init() after error detectionMarkus Elfring1-34/+33
Four checks could be repeated by the d40_hw_detect_init() function during error handling even if the passed variables contained a null pointer. * Adjust jump targets according to the Linux coding style convention. * Call the interface "iounmap" only once at the end. * Delete the repeated checks which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Use kmalloc_array() in d40_hw_detect_init()Markus Elfring1-3/+3
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected also by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Replace four kzalloc() calls by kcalloc() in d40_hw_detect_init()Markus Elfring1-8/+10
* The script "checkpatch.pl" can point information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code places. * Replace the specification of data types by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Improve a size determination in d40_of_probe()Markus Elfring1-3/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Move an assignment in d40_lcla_allocate()Markus Elfring1-1/+2
Move one assignment for the local variable "ret" so that its setting will only be performed after corresponding data processing succeeded by this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Rename a jump label in d40_lcla_allocate()Markus Elfring1-4/+4
Adjust jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Return directly after a failed kmalloc_array()Markus Elfring1-4/+2
Return directly after a memory allocation failed in this function at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ste_dma40: Use kmalloc_array() in d40_lcla_allocate()Markus Elfring1-3/+3
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-14dmaengine: cleanup with list_first_entry_or_null()Masahiro Yamada1-31/+5
The combo of list_empty() check and return list_first_entry() can be replaced with list_first_entry_or_null(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: ste_dma40: convert callback to helper functionDave Jiang1-6/+4
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin1-3/+1
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: ste_dma40: Only calculate residue if txstate exists.Peter Griffin1-1/+1
There is no point calculating the residue if there is no txstate to store the value. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete an unnecessary variable initialisation in d40_probe()Markus Elfring1-1/+1
The variable "res" will eventually be set to a resource pointer from a call of the d40_hw_detect_init(() function. Thus let us omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete another unnecessary check in d40_probe()Markus Elfring1-42/+40
A single jump label was used by the d40_probe() function in several cases for error handling which was a bit inefficient here. * This implementation detail could be improved by the introduction of another jump label. * Remove an extra check for the variable "base". * Omit its explicit initialisation at the beginning then. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete an unnecessary check before the function call ↵Markus Elfring1-2/+1
"kmem_cache_destroy" The kmem_cache_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-25dmaengine: ste_dma40: fix a trivial typoGeliang Tang1-1/+1
s/regsiter/register/ Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-05dmaengine: Add an enum for the dmaengine alignment constraintsMaxime Ripard1-1/+1
Most drivers need to set constraints on the buffer alignment for async tx operations. However, even though it is documented, some drivers either use a defined constant that is not matching what the alignment variable expects (like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of power of two. Add a new enum for these alignments that matches what the framework expects, and convert the drivers to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+4
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-01dmaengine: ste_dma40: fix implicit conversionStefan Agner1-2/+4
The function d40_prep_sg takes the type enum dma_transfer_direction as second last parameter. However, the memcpy calls pass DMA_NONE which is of type enum dma_data_direction. Fix this by passing the actual transfer direction DMA_MEM_TO_MEM. This does not change the actual code flow since only the transfer direction DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are actually used in the function d40_prep_sg. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-26Staging: drivers: dma: Add space before (Dilek Uzulmez1-1/+1
This patch fixes checkpatch.pl error in file ste_dma40.c ERROR: space required before the open parenthesis '(' Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-22dmaengine: ste_dma: fix incompatible pointer type warnsVinod Koul1-1/+2
drivers/dma/ste_dma40.c:2627:3: warning: 'return' with a value, in function returning void [enabled by default] drivers/dma/ste_dma40.c: In function 'd40_ops_init': drivers/dma/ste_dma40.c:2869:28: warning: assignment from incompatible pointer type [enabled by default] The function prototype expects return type 'int' whereas these where void Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: d40: Split device_controlMaxime Ripard1-32/+28
Split the device_control callback of the ST-Ericsson DMA 40 driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:54:55 +0000