summaryrefslogtreecommitdiffstats
path: root/drivers/dma/k3dma.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-25dmaengine: k3dma: remove useless ON_WARN_ONCE()Antonio Borneo1-2/+0
Commit 36387a2b1f62b5c087c5fe6f0f7b23b94f722ad7 ("k3dma: Fix memory handling in preparation for cyclic mode") adds few calls to ON_WARN_ONCE() to track the use of ds_run/ds_done. After the two fixes: - dmaengine: k3dma: fix non-cyclic mode - dmaengine: k3dma: fix re-free of the same descriptor the behaviour of ds_run/ds_done is properly fixed. The remaining ON_WARN_ONCE() are never triggered and can be removed. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-25dmaengine: k3dma: fix double free of descriptorAntonio Borneo1-5/+1
Commit 36387a2b1f62b5c087c5fe6f0f7b23b94f722ad7 ("k3dma: Fix memory handling in preparation for cyclic mode") adds code to free the descriptor in ds_done. In cyclic mode, ds_done is never used and it's always NULL, so the added code is not executed. In non-cyclic mode, ds_done is used as a flag: when not NULL it signals that the descriptor has been consumed. No need to free it because it would be free by vchan_complete(). The fix takes back the code changed by the commit above: - remove the free on the descriptor; - initialize ds_done to NULL for the next run. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-25dmaengine: k3dma: fix non-cyclic modeAntonio Borneo1-1/+3
Commit 36387a2b1f62b5c087c5fe6f0f7b23b94f722ad7 ("k3dma: Fix memory handling in preparation for cyclic mode") broke the logic around ds_run/ds_done in case of non-cyclic DMA. This went unnoticed as the only user of k3dma was the i2s audio driver but, with a patch set to enable dma on SPI, the issue popped out. The fix re-applies the initialization to ds_run/ds_done in k3_dma_start_txd() that were removed by the commit above. Also, one of the calls to k3_dma_start_txd() is triggered by (ds_done != NULL), so remove the noisy and useless call to WARN_ON_ONCE(). Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-08dmaengine: k3dma: move to dma_pool_zallocVinod Koul1-2/+1
Replace dma_pool_alloc & memset with dma_pool_zalloc. Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-07dmaengine: k3dma: use correct format string for debug outputArnd Bergmann1-3/+3
The newly added k3_dma_prep_dma_cyclic function has some debug output that uses incorrect typecasts, some of which cause a warning like: drivers/dma/k3dma.c: In function 'k3_dma_prep_dma_cyclic': drivers/dma/k3dma.c:589:671: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] In general, we have to print 'dma_addr_t' values using special '%pad' format to get the correct behavior on kernels that have a 64-bit dma_addr_t type but 32-bit pointers. Similarly, printing size_t values should be done using the %z modifier to get the correct behavior on 64-bit kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a7e08fa6cc78 ("k3dma: Add cyclic mode for audio") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Add cyclic mode for audioAndy Green1-11/+103
Currently the k3dma driver doesn't offer the cyclic mode necessary for handling audio. This patch adds it. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> [jstultz: Forward ported to mainline, removed a few bits of logic that didn't seem to have much effect] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Fix memory handling in preparation for cyclic modeJohn Stultz1-14/+24
With cyclic mode, the shared virt-dma logic doesn't actually manage the descriptor state, nor the calling of the descriptor free callback. This results in leaking a desc structure every time we start an audio transfer. Thus we must manage it ourselves. The k3dma driver already keeps track of the active and finished descriptors via ds_run and ds_done pointers, so cleanup how we handle those two values, so when we tear down everything in terminate_all, call free_desc on the ds_run and ds_done pointers if they are not null. NOTE: HiKey doesn't use the non-cyclic dma modes, so I'm not been able to test those modes. But with this patch we no longer leak the desc structures. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Fix occasional DMA ERR issue by using proper dma apiJohn Stultz1-8/+45
After lots of debugging on an occasional DMA ERR issue, I realized that the desc structures which we point the dma hardware are being allocated out of regular memory. This means when we fill the desc structures, that data doesn't always get flushed out to memory by the time we start the dma transfer, resulting in the dma engine getting some null values, resulting in a DMA ERR on the first irq. Thus, this patch adopts mechanism similar to the zx296702_dma of allocating the desc structures from a dma pool, so the memory caching rules are properly set to avoid this issue. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: John Stutlz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Fix "nobody cared" message seen on any errorAndy Green1-3/+5
As it was before, as soon as the DMAC IP felt there was an error he would return IRQ_NONE since no actual transfer had completed. After spinning on that for 100K interrupts, Linux yanks the IRQ with a "nobody cared" error. This patch lets it handle the interrupt and keep the IRQ alive. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> [jstultz: Forward ported to mainline] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Fix dma err offsetsAndy Green1-2/+2
The offsets for ERR1 and ERR2 are wrong actually. That's why you can never clear an error. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> [jstultz: Forward ported to mainline] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-31k3dma: Fix hisi burst clippingAndy Green1-1/+1
Max burst len is a 4-bit field, but at the moment it's clipped with a 5-bit constant... reduce it to that which can be expressed Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Andy Green <andy@warmcat.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> [jstultz: Forward ported to mainline] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-28Merge branch 'topic/dmaengine_cleanups' into for-linusVinod Koul1-0/+5
2016-07-24dmaengine: k3dma: add missing clk_disable_unprepare() on error in k3_dma_probe()Wei Yongjun1-1/+3
Add the missing clk_disable_unprepare() before return from k3_dma_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16dmaengine: k3dma: explicitly freeup irqVinod Koul1-0/+5
dmaengine device should explicitly call devm_free_irq() when using devm_request_irq(). The irq is still ON when devices remove is executed and irq should be quiesced before remove is completed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin1-6/+4
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-05dmaengine: Add an enum for the dmaengine alignment constraintsMaxime Ripard1-2/+1
Most drivers need to set constraints on the buffer alignment for async tx operations. However, even though it is documented, some drivers either use a defined constant that is not matching what the alignment variable expects (like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of power of two. Add a new enum for these alignments that matches what the framework expects, and convert the drivers to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18Merge branch 'topic/alloc_removal' into for-linusVinod Koul1-6/+0
2015-03-18dmaengine: k3dma: remove device_alloc_chan_resources handlerVinod Koul1-6/+0
Now that device_alloc_chan_resources handler in not mandatory, remove dummy implementations Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: k3: fix duplicate function definitionArnd Bergmann1-3/+3
Commit db08425ebd51f ("dmaengine: k3: Split device_control") introduced two new helper functions, which unfortunately have the same names as the existing suspend/resume functions, resulting in a build error when CONFIG_PM_SLEEP is enabled: drivers/dma/k3dma.c:823:12: error: conflicting types for 'k3_dma_resume' static int k3_dma_resume(struct device *dev) ^ drivers/dma/k3dma.c:625:12: note: previous definition of 'k3_dma_resume' was here static int k3_dma_resume(struct dma_chan *chan) ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: db08425ebd51f ("dmaengine: k3: Split device_control") Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: k3: Fix duplicated function name and allmodconfig buildKrzysztof Kozlowski1-4/+4
While splitting device control in db08425ebd51 ("dmaengine: k3: Split device_control") new function with the same 'k3_dma_resume' name was added, leading to build error: drivers/dma/k3dma.c:823:12: error: conflicting types for ‘k3_dma_resume’ drivers/dma/k3dma.c:625:12: note: previous definition of ‘k3_dma_resume’ was here Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: k3: Split device_controlMaxime Ripard1-90/+107
Split the device_control callback of the Hisilicon K3 DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-17dmaengine: k3dma: Add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han1-0/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/dma/k3dma.c:790:12: warning: 'k3_dma_suspend' defined but not used [-Wunused-function] drivers/dma/k3dma.c:806:12: warning: 'k3_dma_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06dmaengine: Remove .owner field for driverKiran Padwal1-1/+0
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> [for nvidia] Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06dmaengine: k3: Remove chancnt affectationsMaxime Ripard1-1/+0
chanctnt is already filled by dma_async_device_register, which uses the channel list to know how much channels there is. Since it's already filled, we can safely remove it from the drivers' probe function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dmaengine: k3dma: fix sparse warningsZhangfei Gao1-2/+2
Fix sparse warnings: drivers/dma/k3dma.c:480:20: warning: Using plain integer as NULL pointer drivers/dma/k3dma.c:820:1: warning: symbol 'k3_dma_pmops' was not declared. Should it be static? Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25dmaengine: k3dma: use DMA_COMPLETE for dma completion statusVinod Koul1-1/+1
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-13dma: misc: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()Jingoo Han1-3/+3
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-28dmaengine: Add hisilicon k3 DMA engine driverZhangfei Gao1-0/+837
Add dmaengine driver for hisilicon k3 platform based on virt_dma Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Tested-by: Kai Yang <jean.yangkai@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 14:23:39 +0000