summaryrefslogtreecommitdiffstats
path: root/drivers/dma/imx-dma.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-24dmaengine: imx-dma: Remove unused .id_tableFabio Estevam1-29/+4
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201124143405.2764-1-festevam@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18dmaengine: imx-dma: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200831103542.305571-9-allen.lkml@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul1-1/+1
Linux 5.9-rc4
2020-09-11dmaengine: imx-dma: Drop local dma_parmsRobin Murphy1-2/+0
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/7fad3c60cac2bf4f8dab791f8b6eafae90abc960.1599164692.git.robin.murphy@arm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2019-07-31dmaengine: imx-dma: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/dma/imx-dma.c: In function ‘imxdma_xfer_desc’: drivers/dma/imx-dma.c:542:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (slot == IMX_DMA_2D_SLOT_A) { ^ drivers/dma/imx-dma.c:559:2: note: here case IMXDMA_DESC_MEMCPY: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190729225221.GA24269@embeddedor Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-5/+3
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-02-04dmaengine: imx-dma: fix wrong callback invokeLeonid Iziumtsev1-4/+4
Once the "ld_queue" list is not empty, next descriptor will migrate into "ld_active" list. The "desc" variable will be overwritten during that transition. And later the dmaengine_desc_get_callback_invoke() will use it as an argument. As result we invoke wrong callback. That behaviour was in place since: commit fcaaba6c7136 ("dmaengine: imx-dma: fix callback path in tasklet"). But after commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job") things got worse, since possible delay between tasklet_schedule() from DMA irq handler and actual tasklet function execution got bigger. And that gave more time for new DMA request to be submitted and to be put into "ld_queue" list. It has been noticed that DMA issue is causing problems for "mxc-mmc" driver. While stressing the system with heavy network traffic and writing/reading to/from sd card simultaneously the timeout may happen: 10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900) That often lead to file system corruption. Signed-off-by: Leonid Iziumtsev <leonid.iziumtsev@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Cc: stable@vger.kernel.org
2019-01-20dmaengine: imx-dma: change return of 'imxdma_sg_next' to voidVinod Koul1-3/+1
The return value of function 'imxdma_sg_next' is not checked anywhere, so make it void return type. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20dmaengine: imx-dma: change variable 'now' type to size_tVinod Koul1-1/+1
now is used to keep size and it is better to change the variable type to size_t Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20dmaengine: imx-dma: fix warning comparison of distinct pointer typesAnders Roxell1-1/+1
The warning got introduced by commit 930507c18304 ("arm64: add basic Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning haven't been seen before since size_t was 'unsigned int' when built on arm32. ../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’: ../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^~ ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’ (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’ __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’ #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ ../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’ now = min(d->len, sg_dma_len(sg)); ^~~ Rework so that we use min_t and pass in the size_t that returns the minimum of two values, using the specified type. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-07dmaengine: imx-dma: remove dma_slave_config direction usageVinod Koul1-3/+17
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-23dmaengine: imx-dma: Switch to SPDX identifierFabio Estevam1-16/+10
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-01-21ARM: 8745/1: get rid of __memzero()Nicolas Pitre1-1/+1
The __memzero assembly code is almost identical to memset's except for two orr instructions. The runtime performance of __memset(p, n) and memset(p, 0, n) is accordingly almost identical. However, the memset() macro used to guard against a zero length and to call __memzero at compile time when the fill value is a constant zero interferes with compiler optimizations. Arnd found tha the test against a zero length brings up some new warnings with gcc v8: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82103 And successively rremoving the test against a zero length and the call to __memzero optimization produces the following kernel sizes for defconfig with gcc 6: text data bss dec hex filename 12248142 6278960 413588 18940690 1210312 vmlinux.orig 12244474 6278960 413588 18937022 120f4be vmlinux.no_zero_test 12239160 6278960 413588 18931708 120dffc vmlinux.no_memzero So it is probably not worth keeping __memzero around given that the compiler can do a better job at inlining trivial memset(p,0,n) on its own. And the memset code already handles a zero length just fine. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-24dmaengine: Convert timers to use timer_setup()Kees Cook1-5/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-01dmaengine: imx-dma: cleanup scatterlist layering violationsLogan Gunthorpe1-5/+2
This dma engine driver directly accesses page_link assuming knowledge that should be contained only in scatterlist.h. We replace these with calls to sg_chain and sg_assign_page. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Per Förlin <per.forlin@axis.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: imx-dma: convert callback to helper functionDave Jiang1-3/+1
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16dmaengine: imx-dma: fix coding style issueVinod Koul1-1/+1
imxdma_probe function starting brace is wrongly indented, so fix that Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org>
2016-07-16dmaengine: imx-dma: explicitly freeup irqVinod Koul1-0/+29
dmaengine device should explicitly call devm_free_irq() when using devm_request_irq(). The irq is still ON when devices remove is executed and irq should be quiesced before remove is completed. Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-05dmaengine: Add an enum for the dmaengine alignment constraintsMaxime Ripard1-1/+1
Most drivers need to set constraints on the buffer alignment for async tx operations. However, even though it is documented, some drivers either use a defined constant that is not matching what the alignment variable expects (like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of power of two. Add a new enum for these alignments that matches what the framework expects, and convert the drivers to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-07dmaengine: imx-dma: Check for clk_prepare_enable() errorFabio Estevam1-9/+14
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. While at it, change the label 'err' to a more descriptive naming. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-04dmaengine: imx: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-02Merge branch 'topic/slave_caps_device_control_fix_rebased' into for-linusVinod Koul1-52/+51
2014-12-22dmaengine: imx-dma.c: Remove unused functionRickard Strandqvist1-5/+0
Remove the function is_imx21_dma() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: imx: Split device_controlMaxime Ripard1-52/+51
Split the device_control callback of the Freescale IMX DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-20dma: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart1-1/+1
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-06dma: imx-dma: Add missing module owner fieldAlexander Shiyan1-0/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-06dma: imx-dma: Replace printk with dev_*Alexander Shiyan1-6/+6
Use the dev_* message logging API instead of raw printk. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-31Merge branch 'for-linus' into nextVinod Koul1-17/+23
2013-10-31dmaengine: imx-dma: fix format warningsRussell King1-17/+23
drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' We can't use the %pa format for these because this relates to phys_addr_t, and dma_addr_t can be a different size. So, fix these by converting them to %llx and casting the dma_addr_t to always be unsigned long long. While we're here, also use %zu for size_t. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25dmaengine: imx-dma: use DMA_COMPLETE for dma completion statusVinod Koul1-1/+1
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-04dmaengine: imx-dma: fix callback path in taskletMichael Grzeschik1-4/+6
We need to free the ld_active list head before jumping into the callback routine. Otherwise the callback could run into issue_pending and change our ld_active list head we just going to free. This will run the channel list into an currupted and undefined state. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-04dmaengine: imx-dma: fix lockdep issue between irqhandler and taskletMichael Grzeschik1-11/+8
The tasklet and irqhandler are using spin_lock while other routines are using spin_lock_irqsave/restore. This leads to lockdep issues as described bellow. This patch is changing the code to use spinlock_irq_save/restore in both code pathes. As imxdma_xfer_desc always gets called with spin_lock_irqsave lock held, this patch also removes the spare call inside the routine to avoid double locking. [ 403.358162] ================================= [ 403.362549] [ INFO: inconsistent lock state ] [ 403.366945] 3.10.0-20130823+ #904 Not tainted [ 403.371331] --------------------------------- [ 403.375721] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 403.381769] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 403.386762] (&(&imxdma->lock)->rlock){?.-...}, at: [<c019d77c>] imxdma_tasklet+0x20/0x134 [ 403.395201] {IN-HARDIRQ-W} state was registered at: [ 403.400108] [<c004b264>] mark_lock+0x2a0/0x6b4 [ 403.404798] [<c004d7c8>] __lock_acquire+0x650/0x1a64 [ 403.410004] [<c004f15c>] lock_acquire+0x94/0xa8 [ 403.414773] [<c02f74e4>] _raw_spin_lock+0x54/0x8c [ 403.419720] [<c019d094>] dma_irq_handler+0x78/0x254 [ 403.424845] [<c0061124>] handle_irq_event_percpu+0x38/0x1b4 [ 403.430670] [<c00612e4>] handle_irq_event+0x44/0x64 [ 403.435789] [<c0063a70>] handle_level_irq+0xd8/0xf0 [ 403.440903] [<c0060a20>] generic_handle_irq+0x28/0x38 [ 403.446194] [<c0009cc4>] handle_IRQ+0x68/0x8c [ 403.450789] [<c0008714>] avic_handle_irq+0x3c/0x48 [ 403.455811] [<c0008f84>] __irq_svc+0x44/0x74 [ 403.460314] [<c0040b04>] cpu_startup_entry+0x88/0xf4 [ 403.465525] [<c02f00d0>] rest_init+0xb8/0xe0 [ 403.470045] [<c03e07dc>] start_kernel+0x28c/0x2d4 [ 403.474986] [<a0008040>] 0xa0008040 [ 403.478709] irq event stamp: 50854 [ 403.482140] hardirqs last enabled at (50854): [<c001c6b8>] tasklet_action+0x38/0xdc [ 403.489954] hardirqs last disabled at (50853): [<c001c6a0>] tasklet_action+0x20/0xdc [ 403.497761] softirqs last enabled at (50850): [<c001bc64>] _local_bh_enable+0x14/0x18 [ 403.505741] softirqs last disabled at (50851): [<c001c268>] irq_exit+0x88/0xdc [ 403.513026] [ 403.513026] other info that might help us debug this: [ 403.519593] Possible unsafe locking scenario: [ 403.519593] [ 403.525548] CPU0 [ 403.528020] ---- [ 403.530491] lock(&(&imxdma->lock)->rlock); [ 403.534828] <Interrupt> [ 403.537474] lock(&(&imxdma->lock)->rlock); [ 403.541983] [ 403.541983] *** DEADLOCK *** [ 403.541983] [ 403.547951] no locks held by swapper/0. [ 403.551813] [ 403.551813] stack backtrace: [ 403.556222] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-20130823+ #904 [ 403.563039] Backtrace: [ 403.565581] [<c000b98c>] (dump_backtrace+0x0/0x10c) from [<c000bb28>] (show_stack+0x18/0x1c) [ 403.574054] r6:00000000 r5:c05c51d8 r4:c040bd58 r3:00200000 [ 403.579872] [<c000bb10>] (show_stack+0x0/0x1c) from [<c02f398c>] (dump_stack+0x20/0x28) [ 403.587955] [<c02f396c>] (dump_stack+0x0/0x28) from [<c02f29c8>] (print_usage_bug.part.28+0x224/0x28c) [ 403.597340] [<c02f27a4>] (print_usage_bug.part.28+0x0/0x28c) from [<c004b404>] (mark_lock+0x440/0x6b4) [ 403.606682] r8:c004a41c r7:00000000 r6:c040bd58 r5:c040c040 r4:00000002 [ 403.613566] [<c004afc4>] (mark_lock+0x0/0x6b4) from [<c004d844>] (__lock_acquire+0x6cc/0x1a64) [ 403.622244] [<c004d178>] (__lock_acquire+0x0/0x1a64) from [<c004f15c>] (lock_acquire+0x94/0xa8) [ 403.631010] [<c004f0c8>] (lock_acquire+0x0/0xa8) from [<c02f74e4>] (_raw_spin_lock+0x54/0x8c) [ 403.639614] [<c02f7490>] (_raw_spin_lock+0x0/0x8c) from [<c019d77c>] (imxdma_tasklet+0x20/0x134) [ 403.648434] r6:c3847010 r5:c040e890 r4:c38470d4 [ 403.653194] [<c019d75c>] (imxdma_tasklet+0x0/0x134) from [<c001c70c>] (tasklet_action+0x8c/0xdc) [ 403.662013] r8:c0599160 r7:00000000 r6:00000000 r5:c040e890 r4:c3847114 r3:c019d75c [ 403.670042] [<c001c680>] (tasklet_action+0x0/0xdc) from [<c001bd4c>] (__do_softirq+0xe4/0x1f0) [ 403.678687] r7:00000101 r6:c0402000 r5:c059919c r4:00000001 [ 403.684498] [<c001bc68>] (__do_softirq+0x0/0x1f0) from [<c001c268>] (irq_exit+0x88/0xdc) [ 403.692652] [<c001c1e0>] (irq_exit+0x0/0xdc) from [<c0009cc8>] (handle_IRQ+0x6c/0x8c) [ 403.700514] r4:00000030 r3:00000110 [ 403.704192] [<c0009c5c>] (handle_IRQ+0x0/0x8c) from [<c0008714>] (avic_handle_irq+0x3c/0x48) [ 403.712664] r5:c0403f28 r4:c0593ebc [ 403.716343] [<c00086d8>] (avic_handle_irq+0x0/0x48) from [<c0008f84>] (__irq_svc+0x44/0x74) [ 403.724733] Exception stack(0xc0403f28 to 0xc0403f70) [ 403.729841] 3f20: 00000001 00000004 00000000 20000013 c0402000 c04104a8 [ 403.738078] 3f40: 00000002 c0b69620 a0004000 41069264 a03fb5f4 c0403f7c c0403f40 c0403f70 [ 403.746301] 3f60: c004b92c c0009e74 20000013 ffffffff [ 403.751383] r6:ffffffff r5:20000013 r4:c0009e74 r3:c004b92c [ 403.757210] [<c0009e30>] (arch_cpu_idle+0x0/0x4c) from [<c0040b04>] (cpu_startup_entry+0x88/0xf4) [ 403.766161] [<c0040a7c>] (cpu_startup_entry+0x0/0xf4) from [<c02f00d0>] (rest_init+0xb8/0xe0) [ 403.774753] [<c02f0018>] (rest_init+0x0/0xe0) from [<c03e07dc>] (start_kernel+0x28c/0x2d4) [ 403.783051] r6:c03fc484 r5:ffffffff r4:c040a0e0 [ 403.787797] [<c03e0550>] (start_kernel+0x0/0x2d4) from [<a0008040>] (0xa0008040) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-04dmaengine: imx-dma: fix slow path issue in prep_dma_cyclicMichael Grzeschik1-1/+1
When perparing cyclic_dma buffers by the sound layer, it will dump the following lockdep trace. The leading snd_pcm_action_single get called with read_lock_irq called. To fix this, we change the kcalloc call from GFP_KERNEL to GFP_ATOMIC. WARNING: at kernel/lockdep.c:2740 lockdep_trace_alloc+0xcc/0x114() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Modules linked in: CPU: 0 PID: 832 Comm: aplay Not tainted 3.11.0-20130823+ #903 Backtrace: [<c000b98c>] (dump_backtrace+0x0/0x10c) from [<c000bb28>] (show_stack+0x18/0x1c) r6:c004c090 r5:00000009 r4:c2e0bd18 r3:00404000 [<c000bb10>] (show_stack+0x0/0x1c) from [<c02f397c>] (dump_stack+0x20/0x28) [<c02f395c>] (dump_stack+0x0/0x28) from [<c001531c>] (warn_slowpath_common+0x54/0x70) [<c00152c8>] (warn_slowpath_common+0x0/0x70) from [<c00153dc>] (warn_slowpath_fmt+0x38/0x40) r8:00004000 r7:a3b90000 r6:000080d0 r5:60000093 r4:c2e0a000 r3:00000009 [<c00153a4>] (warn_slowpath_fmt+0x0/0x40) from [<c004c090>] (lockdep_trace_alloc+0xcc/0x114) r3:c03955d8 r2:c03907db [<c004bfc4>] (lockdep_trace_alloc+0x0/0x114) from [<c008f16c>] (__kmalloc+0x34/0x118) r6:000080d0 r5:c3800120 r4:000080d0 r3:c040a0f8 [<c008f138>] (__kmalloc+0x0/0x118) from [<c019c95c>] (imxdma_prep_dma_cyclic+0x64/0x168) r7:a3b90000 r6:00000004 r5:c39d8420 r4:c3847150 [<c019c8f8>] (imxdma_prep_dma_cyclic+0x0/0x168) from [<c024618c>] (snd_dmaengine_pcm_trigger+0xa8/0x160) [<c02460e4>] (snd_dmaengine_pcm_trigger+0x0/0x160) from [<c0241fa8>] (soc_pcm_trigger+0x90/0xb4) r8:c058c7b0 r7:c3b8140c r6:c39da560 r5:00000001 r4:c3b81000 [<c0241f18>] (soc_pcm_trigger+0x0/0xb4) from [<c022ece4>] (snd_pcm_do_start+0x2c/0x38) r7:00000000 r6:00000003 r5:c058c7b0 r4:c3b81000 [<c022ecb8>] (snd_pcm_do_start+0x0/0x38) from [<c022e958>] (snd_pcm_action_single+0x40/0x6c) [<c022e918>] (snd_pcm_action_single+0x0/0x6c) from [<c022ea64>] (snd_pcm_action_lock_irq+0x7c/0x9c) r7:00000003 r6:c3b810f0 r5:c3b810f0 r4:c3b81000 [<c022e9e8>] (snd_pcm_action_lock_irq+0x0/0x9c) from [<c023009c>] (snd_pcm_common_ioctl1+0x7f8/0xfd0) r8:c3b7f888 r7:005407b8 r6:c2c991c0 r5:c3b81000 r4:c3b81000 r3:00004142 [<c022f8a4>] (snd_pcm_common_ioctl1+0x0/0xfd0) from [<c023117c>] (snd_pcm_playback_ioctl1+0x464/0x488) [<c0230d18>] (snd_pcm_playback_ioctl1+0x0/0x488) from [<c02311d4>] (snd_pcm_playback_ioctl+0x34/0x40) r8:c3b7f888 r7:00004142 r6:00000004 r5:c2c991c0 r4:005407b8 [<c02311a0>] (snd_pcm_playback_ioctl+0x0/0x40) from [<c00a14a4>] (vfs_ioctl+0x30/0x44) [<c00a1474>] (vfs_ioctl+0x0/0x44) from [<c00a1fe8>] (do_vfs_ioctl+0x55c/0x5c0) [<c00a1a8c>] (do_vfs_ioctl+0x0/0x5c0) from [<c00a208c>] (SyS_ioctl+0x40/0x68) [<c00a204c>] (SyS_ioctl+0x0/0x68) from [<c0009380>] (ret_fast_syscall+0x0/0x44) r8:c0009544 r7:00000036 r6:bedeaa58 r5:00000000 r4:000000c0 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: imx-dma: Remove redundant NULL checkSachin Kamat1-4/+2
kfree on a NULL pointer is a no-op. Null pointer check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: imx-dma: imxdma->dev used uninitializedMarkus Pargmann1-1/+1
imxdma->dev is used for dev_warn before it was set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: imx-dma: Add oftree supportMarkus Pargmann1-0/+75
Adding devicetree support for imx-dma driver. Use driver name for function 'imx_dma_is_general_purpose' because the devicename for devicetree initialized devices is different. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-15dma: imx-dma: Remove redundant NULL check before kfreeSyam Sidhardhan1-2/+1
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-15dma: Remove erroneous __exit and __exit_p() referencesMaxin B. John1-2/+2
Removing the annotation with __exit and referencing with __exit_p() present in dma driver module remove hooks. Part of the __devexit and __devexit_p() purge. Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman1-3/+2
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25dma: Convert to devm_ioremap_resource()Thierry Reding1-3/+4
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers.Javier Martin1-3/+2
HW chaining is currently broken in imx-dma. It can be easily reproduced doing intensive accesses to a external MMC card and checking how the file system is corrupted. Preventing the driver to use HW chaining solves these issues. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-11-06Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/cleanupOlof Johansson1-1/+3
From Michal Simek: * 'arm-next' of git://git.xilinx.com/linux-xlnx: zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings + Linux 3.7-rc3
2012-10-24dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()Wei Yongjun1-1/+3
Add the missing unlock on the error handling path in function imxdma_xfer_desc(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-15dma: imx-dma: remove cpu_is_xxx by using platform_device_idShawn Guo1-6/+48
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Cc: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-15dma: imx-dma: retrieve MEM and IRQ from resourcesShawn Guo1-15/+20
Retrieve MEM and IRQ from resources rather than directly using the value by including machine header. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-15dma: imx-dma: use devm_kzalloc and devm_request_irqShawn Guo1-39/+15
Use managed functions devm_kzalloc and devm_request_irq instead to make the error patch simpler. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 04:46:50 +0000