summaryrefslogtreecommitdiffstats
path: root/drivers/dma/hsu
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+2
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-06-25dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"Andy Shevchenko1-2/+2
The commit 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users. As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1." This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16. Fixes: 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner3-12/+3
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-07dmaengine: hsu: remove dma_slave_config direction usageVinod Koul1-4/+0
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-10dmaengine: hsu: Support dmaengine_terminate_sync()Andy Shevchenko1-0/+8
It appears that the driver misses the support of dmaengine_terminate_sync(). Since many of callers expects this behaviour implement the new device_synchronize() callback to allow proper synchronization when stopping a channel. Fixes: b36f09c3c441 ("dmaengine: Add transfer termination synchronization support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2017-01-19serial: 8250_mid: handle interrupt correctly in DMA caseAndy Shevchenko1-2/+15
Starting from Tangier B0 and continuing on Anniedale the HSU DMA interrupt line is actually shared with UART. Handling them independently is racy and quite often comes with the following traceback. irq 54: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6-edison64-86244934+ #1 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 ffff88003f203eb0 ffffffff8130e718 ffff880032627000 ffff88003262709c ffff88003f203ed8 ffffffff810a3960 ffff880032627000 0000000000000000 ffff880032627000 ffff88003f203f10 ffffffff810a3cc7 ffff880032627000 Call Trace: <IRQ> [<ffffffff8130e718>] dump_stack+0x4d/0x65 [<ffffffff810a3960>] __report_bad_irq+0x30/0xc0 [<ffffffff810a3cc7>] note_interrupt+0x227/0x270 [<ffffffff810a1380>] handle_irq_event_percpu+0x40/0x50 [<ffffffff810a13b7>] handle_irq_event+0x27/0x50 [<ffffffff810a42d5>] handle_fasteoi_irq+0x85/0x150 [<ffffffff8101d7fe>] handle_irq+0x6e/0x120 [<ffffffff8105b8bc>] ? _local_bh_enable+0x1c/0x50 [<ffffffff8101d0d6>] do_IRQ+0x46/0xd0 [<ffffffff818cef3f>] common_interrupt+0x7f/0x7f <EOI> [<ffffffff818cdead>] ? mwait_idle+0x7d/0x140 [<ffffffff81024c9a>] arch_cpu_idle+0xa/0x10 [<ffffffff818ce150>] default_idle_call+0x20/0x30 [<ffffffff810908fd>] cpu_startup_entry+0x16d/0x1d0 [<ffffffff818c882d>] rest_init+0x6d/0x70 [<ffffffff81f93e8f>] start_kernel+0x3e2/0x3ef [<ffffffff81f9343d>] x86_64_start_reservations+0x38/0x3a [<ffffffff81f93529>] x86_64_start_kernel+0xea/0xed handlers: [<ffffffff81411670>] serial8250_interrupt Disabling IRQ #54 Fix this by handling interrupt only in one place. The issue is discussed here: https://github.com/andy-shev/linux/issues/5 Moreover this also fixes another bug when Rx DMA returns wrong residue and we can't rely on it. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-25dmaengine: hsu: pci: switch to new API for IRQ allocationAndy Shevchenko1-3/+5
There is new API in place which provides allocation mechanism of interrupts for PCI devices. Use it in the HSU DMA driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-02dmaengine: hsu: refactor hsu_dma_do_irq() to return intAndy Shevchenko2-8/+7
Since we have nice macro IRQ_RETVAL() we would use it to convert a flag of handled interrupt from int to irqreturn_t. The rationale of doing this is: a) hence we implicitly mark hsu_dma_do_irq() as an auxiliary function that can't be used as interrupt handler directly, and b) to be in align with serial driver which is using serial8250_handle_irq() that returns plain int by design. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25dmaengine: hsu: Export hsu_dma_get_status()Chuah, Kim Tatt2-23/+78
To allow other code to safely read DMA Channel Status Register (where the register attribute for Channel Error, Descriptor Time Out & Descriptor Done fields are read-clear), export hsu_dma_get_status(). hsu_dma_irq() is renamed to hsu_dma_do_irq() and requires Status Register value to be passed in. Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-3/+9
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-04-04dmaengine: hsu: set maximum allowed segment size for DMAAndy Shevchenko2-0/+6
This tells, for example, IOMMU what the maximum size of a segment the DMA controller can send. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: hsu: don't check direction of timeouted channelAndy Shevchenko1-1/+1
The timeout capability is only available on the so called DMA write channels, i.e. associated with UART Rx FIFO. It means we don't need to check the direction of the channel to handle timeouts. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: hsu: allow more than 3 descriptorsAndy Shevchenko1-2/+2
Current code allows only up to 3 descriptors to be programmed to the hardware since it is used wrong calculations. Change % to min_t() to allow as many descriptors as user supplied. At once it could be programmed up to 4 descriptors due to hardware limitations. The issue was found under stress test, so it might not bother ordinary users. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: hsu: correct use of channel status registerAndy Shevchenko2-1/+4
There is a typo in documentation regarding to descriptor empty bit (DESCE) which is set to 1 when descriptor is empty. Thus, status register at the end of a transfer usually returns all DESCE bits set and thus it will never be zero. Moreover, there are 2 bits (CDESC) that encode current descriptor, on which interrupt has been asserted. In case when we have few descriptors programmed we might have non-zero value. Remove DESCE and CDESC bits from DMA channel status register (HSU_CH_SR) when reading it. Fixes: 2b49e0c56741 ("dmaengine: append hsu DMA driver") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: hsu: correct residue calculation of active descriptorAndy Shevchenko1-2/+5
The commit f0579c8ceaf1 ("dmaengine: hsu: speed up residue calculation") speeded up calculation of the queued descriptor but broke the initial residue value for active descriptor. In accordance with documentation the hardware descriptor is updated each time DMA transfered some bytes. It means we have to calculate a sum of lengths of non-submitted hardware descriptors and whatever current values in the hardware. Do this straightforward. Fixes: f0579c8ceaf1 ("dmaengine: hsu: speed up residue calculation") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: hsu: set HSU_CH_MTSR to memory widthAndy Shevchenko1-2/+2
HSU_CH_MTSR register should be programmed to a minimum size to transfer. This size on a memory side of the transfer. Program it accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05dmaengine: hsu: speed up residue calculationAndy Shevchenko2-13/+5
There is no need to calculate an overall length of the descriptor each time we call for DMA transfer status. Instead we do this at descriptor allocation stage and keep the stored length for further usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-17dmaengine: hsu: remove platform dataHeikki Krogerus3-18/+9
There are no platforms where it's not possible to calculate the number of channels based on IO space length, and since that is the only purpose for struct hsu_dma_platform_data, removing it. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17dmaengine: hsu: make the UART driver in control of selecting this driverHeikki Krogerus1-7/+2
HSU (High Speed UART) DMA engine, like the name suggests, is an integrated DMA engine for UART and UART alone. Therefore, making the UART drivers responsible of selecting it and removing the user selectable option for it. The UARTs with this DMA engine can always select HSU_DMA when SERIAL_8250_DMA option is enabled. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-16dmaengine: hsu: remove excessive lockAndy Shevchenko2-36/+4
All hardware accesses are done under virtual channel lock. That's why specific channel lock is excessive and can be removed safely. This has been tested on Intel Medfield and Merrifield. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-02dmaengine: hsu: Fix memory leak when stopping a running transferPeter Ujfalusi1-1/+4
The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [andy: fix the typo to prevent a compilation error] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-22dmaengine: hsu: don't prompt for hsu_core partVinod Koul1-1/+1
HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected so remove the user prompt for this Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-26dmaengine: hsu: move memory allocation to GFP_NOWAITAndy Shevchenko1-2/+2
The GFP_ATOMIC is too strict, and DMAEngine documentation make an advice to use GFP_NOWAIT. This patch does the conversion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26dmaengine: hsu: remove redundant pieces of codeAndy Shevchenko1-11/+2
There are few places where the implemented pieces of code are not needed, i.e.: - direction can't be wrong in hsu_dma_chan_start() - desc->active set to 0 by kzalloc - DMAEngine is NULL-aware when call ->device_alloc_chan_resources() Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26dmaengine: hsu: add Intel Tangier PCI IDAndy Shevchenko1-0/+1
Intel Tangier is known to have the HSU DMA IP as PCI device 00:05.0. The patch adds the ID as found on Intel Edison board to the PCI device table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07dmaengine: append hsu DMA driverAndy Shevchenko5-0/+764
The HSU DMA is developed to support High Speed UART controllers found in particular on Intel MID platforms such as Intel Medfield. The existing implementation is tighten to the drivers/tty/serial/mfd.c driver and has a lot of disadvantages. Besides that we would like to get rid of the old HS UART driver in regarding to extending the 8250 which supports generic DMAEngine API. That's why the current driver has been developed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>