summaryrefslogtreecommitdiffstats
path: root/drivers/dma-buf
AgeCommit message (Collapse)AuthorFilesLines
2022-08-03Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds8-149/+430
Pull drm updates from Dave Airlie: "Highlights: - New driver for logicvc - which is a display IP core. - EDID parser rework to add new extensions - fbcon scrolling improvements - i915 has some more DG2 work but not enabled by default, but should have enough features for userspace to work now. Otherwise it's lots of work all over the place. Detailed summary: New driver: - logicvc vfio: - use aperture API core: - of: Add data-lane helpers and convert drivers - connector: Remove deprecated ida_simple_get() media: - Add various RGB666 and RGB888 format constants panel: - Add HannStar HSD101PWW - Add ETML0700Y5DHA dma-buf: - add sync-file API - set dma mask for udmabuf devices fbcon: - Improve scrolling performance - Sanitize input fbdev: - device unregistering fixes - vesa: Support COMPILE_TEST - Disable firmware-device registration when first native driver loads aperture: - fix segfault during hot-unplug - export for use with other subsystems client: - use driver validated modes dp: - aux: make probing more reliable - mst: Read extended DPCD capabilities during system resume - Support waiting for HDP signal - Port-validation fixes edid: - CEA data-block iterators - struct drm_edid introduction - implement HF-EEODB extension gem: - don't use fb format non-existing planes probe-helper: - use 640x480 as displayport fallback scheduler: - don't kill jobs in interrupt context bridge: - Add support for i.MX8qxp and i.MX8qm - lots of fixes/cleanups - Add TI-DLPC3433 - fy07024di26a30d: Optional GPIO reset - ldb: Add reg and reg-name properties to bindings, Kconfig fixes - lt9611: Fix display sensing; - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling - tc358775: Fix clock settings - ti-sn65dsi83: Allow GPIO to sleep - adv7511: I2C fixes - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback - fsl-ldb: Drop DE flip - ti-sn65dsi86: Convert to atomic modesetting amdgpu: - use atomic fence helpers in DM - fix VRAM address calculations - export CRTC bpc via debugfs - Initial devcoredump support - Enable high priority gfx queue on asics which support it - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 / SDMA 6 - Add gfxoff status query for vangogh - Fix timestamps for cursor only commits - Adjust GART size on newer APUs for S/G display - fix buddy memory corruption amdkfd: - MMU notifier fixes - P2P DMA support using dma-buf - Add available memory IOCTL - HMM profiler support - Simplify GPUVM validation - Unified memory for CWSR save/restore area i915: - General driver clean-up - DG2 enabling (still under force probe) - DG2 small BAR memory support - HuC loading support - DG2 workarounds - DG2/ATS-M device IDs added - Ponte Vecchio prep work and new blitter engines - add Meteorlake support - Fix sparse warnings - DMC MMIO range checks - Audio related fixes - Runtime PM fixes - PSR fixes - Media freq factor and per-gt enhancements - DSI fixes for ICL+ - Disable DMC flip queue handlers - ADL_P voltage swing updates - Use more the VBT for panel information - Fix on Type-C ports with TBT mode - Improve fastset and allow seamless M/N changes - Accept more fixed modes with VRR/DMRRS panels - Disable connector polling for a headless SKU - ADL-S display PLL w/a - Enable THP on Icelake and beyond - Fix i915_gem_object_ggtt_pin_ww regression on old platforms - Expose per tile media freq factor in sysfs - Fix dma_resv fence handling in multi-batch execbuf - Improve on suspend / resume time with VT-d enabled - export CRTC bpc settings via debugfs msm: - gpu: a619 support - gpu: Fix for unclocked GMU register access - gpu: Devcore dump enhancements - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings - WB support on sc7180 - dp: dropped custom bulk clock implementation - fix link retraining on resolution change - hdmi: dropped obsolete GPIO support tegra: - context isolation for host1x engines - tegra234 soc support mediatek: - add vdosys0/1 for mt8195 - add MT8195 dp_intf driver exynos: - Fix resume function issue of exynos decon driver by calling clk_disable_unprepare() properly if clk_prepare_enable() failed. nouveau: - set of misc fixes/cleanups - display cleanups gma500: - Cleanup connector I2C handling hyperv: - Unify VRAM allocation of Gen1 and Gen2 meson: - Support YUV422 output; Refcount fixes mgag200: - Support damage clipping - Support gamma handling - Protect concurrent HW access - Fixes to connector - Store model-specific limits in device-info structure - fix PCI register init panfrost: - Valhall support r128: - Fix bit-shift overflow rockchip: - Locking fixes in error path ssd130x: - Fix built-in linkage udl: - Always advertize VGA connector ast: - Support multiple outputs - fix black screen on resume sun4i: - HDMI PHY cleanups vc4: - Add support for BCM2711 vkms: - Allocate output buffer with vmalloc() mcde: - Fix ref-count leak mxsfb/lcdif: - Support i.MX8MP LCD controller stm/ltdc: - Support dynamic Z order - Support mirroring ingenic: - Fix display at maximum resolution" * tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits) drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code drm/amdgpu: enable support for psp 13.0.4 block drm/amdgpu: add files for PSP 13.0.4 drm/amdgpu: add header files for MP 13.0.4 drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index drm/amdgpu: send msg to IMU for the front-door loading drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b" drm/amdgpu: fix hive reference leak when reflecting psp topology info drm/amd/pm: enable GFX ULV feature support for SMU13.0.0 drm/amd/pm: update driver if header for SMU 13.0.0 drm/amdgpu: move mes self test after drm sched re-started drm/amdgpu: drop non-necessary call trace dump drm/amdgpu: enable VCN cg and JPEG cg/pg drm/amdgpu: vcn_4_0_2 video codec query drm/amdgpu: add VCN_4_0_2 firmware support drm/amdgpu: add VCN function in NBIO v7.7 drm/amdgpu: fix a vcn4 boot poll bug in emulation mode drm/amd/amdgpu: add memory training support for PSP_V13 drm/amdkfd: remove an unnecessary amdgpu_bo_ref drm/amd/pm: Add get_gfx_off_status interface for yellow carp ...
2022-08-03Merge tag 'pull-work.lseek' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs lseek updates from Al Viro: "Jason's lseek series. Saner handling of 'lseek should fail with ESPIPE' - this gets rid of the magical no_llseek thing and makes checks consistent. In particular, the ad-hoc "can we do splice via internal pipe" checks got saner (and somewhat more permissive, which is what Jason had been after, AFAICT)" * tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove no_llseek fs: check FMODE_LSEEK to control internal pipe splicing vfio: do not set FMODE_LSEEK flag dma-buf: remove useless FMODE_LSEEK flag fs: do not compare against ->llseek fs: clear or set FMODE_LSEEK based on llseek function
2022-07-16dma-buf: remove useless FMODE_LSEEK flagJason A. Donenfeld1-1/+0
This is already set by anon_inode_getfile(), since dma_buf_fops has non-NULL ->llseek, so we don't need to set it here too. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-07-14dma-buf: revert "return only unsignaled fences in dma_fence_unwrap_for_each v3"Christian König1-1/+2
This reverts commit 8f61973718485f3e89bc4f408f929048b7b47c83. It turned out that this is not correct. Especially the sync_file info IOCTL needs to see even signaled fences to correctly report back their status to userspace. Instead add the filter in the merge function again where it makes sense. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Karolina Drobnik <karolina.drobnik@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220712102849.1562-1-christian.koenig@amd.com
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-07-12Merge tag 'drm-misc-fixes-2022-07-07-1' of ↵Dave Airlie1-1/+1
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes Three mode setting fixes for fsl-ldb, a fbdev removal use-after-free fix, a dma-buf fence use-after-free fix, a DMA setup fix for rockchip, an error path fix and memory corruption fix for panfrost and one more orientation quirk Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220708054306.wr6jcfdunuypftbq@houat
2022-07-07dma-buf: Fix one use-after-free of fencexinhui pan1-1/+1
Need get the new fence when we replace the old one. Fixes: 047a1b877ed48 ("dma-buf & drm/amdgpu: remove dma_resv workaround") Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220707080241.20060-1-xinhui.pan@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-06-23dma-buf: deprecate DMABUF_SYSFS_STATSChristian König1-1/+5
Add a warning that this UAPI wasn't such a good idea and shouldn't be used by anybody. That should give us a better chance to remove it at some point and prevents others from running into the same issues. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: T.J. Mercier <tjmercier@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220617085702.4298-1-christian.koenig@amd.com
2022-06-20Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-4/+12
Backmerging to get new regmap APIs of v5.19-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-06-20udmabuf: add back sanity checkGerd Hoffmann1-1/+4
Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check. Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.") Reported-by: zdi-disclosures@trendmicro.com Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-15Merge tag 'drm-misc-next-2022-06-08' of ↵Daniel Vetter6-147/+301
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.20: UAPI Changes: * connector: export bpc limits in debugfs * dma-buf: Print buffer name in debugfs Cross-subsystem Changes: * dma-buf: Improve dma-fence handling; Cleanups * fbdev: Device-unregistering fixes Core Changes: * client: Only use driver-validated modes to avoid blank screen * dp-aux: Make probing more reliable; Small fixes * edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups * gem: Don't use framebuffer format's non-exising color planes * probe-helper: Use 640x480 as DisplayPort fallback; Refactoring * scheduler: Don't kill jobs in interrupt context Driver Changes: * amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation; Export CRTC bpc settings via debugfs * bridge: Add TI-DLPC3433; anx7625: Fixes; fy07024di26a30d: Optional GPIO reset; icn6211: Cleanups; ldb: Add reg and reg-name properties to bindings, Kconfig fixes; lt9611: Fix display sensing; lt9611uxc: Fixes; nwl-dsi: Fixes; ps8640: Cleanups; st7735r: Fixes; tc358767: DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83: Fixes; * gma500: Cleanup connector I2C handling * hyperv: Unify VRAM allocation of Gen1 and Gen2 * i915: export CRTC bpc settings via debugfs * meson: Support YUV422 output; Refcount fixes * mgag200: Support damage clipping; Support gamma handling; Protect concurrent HW access; Fixes to connector; Store model-specific limits in device-info structure; Cleanups * nouveau: Fixes and Cleanups * panel: Kconfig fixes * panfrost: Valhall support * r128: Fix bit-shift overflow * rockchip: Locking fixes in error path; Minor cleanups * ssd130x: Fix built-in linkage * ttm: Cleanups * udl; Always advertize VGA connector * fbdev/vesa: Support COMPILE_TEST Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g
2022-06-09udmabuf: Set the DMA mask for the udmabuf device (v2)Vivek Kasireddy1-1/+17
If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. Reported-by: syzbot+10e27961f4da37c443b2@syzkaller.appspotmail.com Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220520205235.3687336-1-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-08dma-buf: Add an API for importing sync files (v10)Jason Ekstrand1-0/+39
This patch is analogous to the previous sync file export patch in that it allows you to import a sync_file into a dma-buf. Unlike the previous patch, however, this does add genuinely new functionality to dma-buf. Without this, the only way to attach a sync_file to a dma-buf is to submit a batch to your driver of choice which waits on the sync_file and claims to write to the dma-buf. Even if said batch is a no-op, a submit is typically way more overhead than just attaching a fence. A submit may also imply extra synchronization with other work because it happens on a hardware queue. In the Vulkan world, this is useful for dealing with the out-fence from vkQueuePresent. Current Linux window-systems (X11, Wayland, etc.) all rely on dma-buf implicit sync. Since Vulkan is an explicit sync API, we get a set of fences (VkSemaphores) in vkQueuePresent and have to stash those as an exclusive (write) fence on the dma-buf. We handle it in Mesa today with the above mentioned dummy submit trick. This ioctl would allow us to set it directly without the dummy submit. This may also open up possibilities for GPU drivers to move away from implicit sync for their kernel driver uAPI and instead provide sync files and rely on dma-buf import/export for communicating with other implicit sync clients. We make the explicit choice here to only allow setting RW fences which translates to an exclusive fence on the dma_resv. There's no use for read-only fences for communicating with other implicit sync userspace and any such attempts are likely to be racy at best. When we got to insert the RW fence, the actual fence we set as the new exclusive fence is a combination of the sync_file provided by the user and all the other fences on the dma_resv. This ensures that the newly added exclusive fence will never signal before the old one would have and ensures that we don't break any dma_resv contracts. We require userspace to specify RW in the flags for symmetry with the export ioctl and in case we ever want to support read fences in the future. There is one downside here that's worth documenting: If two clients writing to the same dma-buf using this API race with each other, their actions on the dma-buf may happen in parallel or in an undefined order. Both with and without this API, the pattern is the same: Collect all the fences on dma-buf, submit work which depends on said fences, and then set a new exclusive (write) fence on the dma-buf which depends on said work. The difference is that, when it's all handled by the GPU driver's submit ioctl, the three operations happen atomically under the dma_resv lock. If two userspace submits race, one will happen before the other. You aren't guaranteed which but you are guaranteed that they're strictly ordered. If userspace manages the fences itself, then these three operations happen separately and the two render operations may happen genuinely in parallel or get interleaved. However, this is a case of userspace racing with itself. As long as we ensure userspace can't back the kernel into a corner, it should be fine. v2 (Jason Ekstrand): - Use a wrapper dma_fence_array of all fences including the new one when importing an exclusive fence. v3 (Jason Ekstrand): - Lock around setting shared fences as well as exclusive - Mark SIGNAL_SYNC_FILE as a read-write ioctl. - Initialize ret to 0 in dma_buf_wait_sync_file v4 (Jason Ekstrand): - Use the new dma_resv_get_singleton helper v5 (Jason Ekstrand): - Rename the IOCTLs to import/export rather than wait/signal - Drop the WRITE flag and always get/set the exclusive fence v6 (Jason Ekstrand): - Split import and export into separate patches - New commit message v7 (Daniel Vetter): - Fix the uapi header to use the right struct in the ioctl - Use a separate dma_buf_import_sync_file struct - Add kerneldoc for dma_buf_import_sync_file v8 (Jason Ekstrand): - Rebase on Christian König's fence rework v9 (Daniel Vetter): - Fix -EINVAL checks for the flags parameter - Add documentation about read/write fences - Add documentation about the expected usage of import/export and specifically call out the possible userspace race. v10 (Simon Ser): - Fix a typo in the docs Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-3-jason@jlekstrand.net
2022-06-08dma-buf: Add an API for exporting sync files (v14)Jason Ekstrand1-0/+67
Modern userspace APIs like Vulkan are built on an explicit synchronization model. This doesn't always play nicely with the implicit synchronization used in the kernel and assumed by X11 and Wayland. The client -> compositor half of the synchronization isn't too bad, at least on intel, because we can control whether or not i915 synchronizes on the buffer and whether or not it's considered written. The harder part is the compositor -> client synchronization when we get the buffer back from the compositor. We're required to be able to provide the client with a VkSemaphore and VkFence representing the point in time where the window system (compositor and/or display) finished using the buffer. With current APIs, it's very hard to do this in such a way that we don't get confused by the Vulkan driver's access of the buffer. In particular, once we tell the kernel that we're rendering to the buffer again, any CPU waits on the buffer or GPU dependencies will wait on some of the client rendering and not just the compositor. This new IOCTL solves this problem by allowing us to get a snapshot of the implicit synchronization state of a given dma-buf in the form of a sync file. It's effectively the same as a poll() or I915_GEM_WAIT only, instead of CPU waiting directly, it encapsulates the wait operation, at the current moment in time, in a sync_file so we can check/wait on it later. As long as the Vulkan driver does the sync_file export from the dma-buf before we re-introduce it for rendering, it will only contain fences from the compositor or display. This allows to accurately turn it into a VkFence or VkSemaphore without any over-synchronization. By making this an ioctl on the dma-buf itself, it allows this new functionality to be used in an entirely driver-agnostic way without having access to a DRM fd. This makes it ideal for use in driver-generic code in Mesa or in a client such as a compositor where the DRM fd may be hard to reach. v2 (Jason Ekstrand): - Use a wrapper dma_fence_array of all fences including the new one when importing an exclusive fence. v3 (Jason Ekstrand): - Lock around setting shared fences as well as exclusive - Mark SIGNAL_SYNC_FILE as a read-write ioctl. - Initialize ret to 0 in dma_buf_wait_sync_file v4 (Jason Ekstrand): - Use the new dma_resv_get_singleton helper v5 (Jason Ekstrand): - Rename the IOCTLs to import/export rather than wait/signal - Drop the WRITE flag and always get/set the exclusive fence v6 (Jason Ekstrand): - Drop the sync_file import as it was all-around sketchy and not nearly as useful as import. - Re-introduce READ/WRITE flag support for export - Rework the commit message v7 (Jason Ekstrand): - Require at least one sync flag - Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference - Use _rcu helpers since we're accessing the dma_resv read-only v8 (Jason Ekstrand): - Return -ENOMEM if the sync_file_create fails - Predicate support on IS_ENABLED(CONFIG_SYNC_FILE) v9 (Jason Ekstrand): - Add documentation for the new ioctl v10 (Jason Ekstrand): - Go back to dma_buf_sync_file as the ioctl struct name v11 (Daniel Vetter): - Go back to dma_buf_export_sync_file as the ioctl struct name - Better kerneldoc describing what the read/write flags do v12 (Christian König): - Document why we chose to make it an ioctl on dma-buf v13 (Jason Ekstrand): - Rebase on Christian König's fence rework v14 (Daniel Vetter & Christian König): - Use dma_rev_usage_rw to get the properly inverted usage to pass to dma_resv_get_singleton() - Clean up the sync_file and fd if copy_to_user() fails Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com> Acked-by: Simon Ser <contact@emersion.fr> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-2-jason@jlekstrand.net
2022-05-30dma-buf: generalize dma_fence unwrap & merging v3Christian König3-113/+218
Introduce a dma_fence_unwrap_merge() macro which allows to unwrap fences which potentially can be containers as well and then merge them back together into a flat dma_fence_array. v2: rename the function, add some more comments about how the wrapper is used, move filtering of signaled fences into the unwrap iterator, add complex selftest which covers more cases. v3: fix signaled fence filtering once more Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-5-christian.koenig@amd.com
2022-05-30dma-buf: cleanup dma_fence_unwrap implementationChristian König2-1/+60
Move the code from the inline functions into exported functions. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-3-christian.koenig@amd.com
2022-05-30dma-buf: cleanup dma_fence_unwrap selftest v2Christian König1-29/+19
The selftests, fix the error handling, remove unused functions and stop leaking memory in failed tests. v2: fix the memory leak correctly. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220518135844.3338-2-christian.koenig@amd.com
2022-05-30dma-buf: cleanup dma_fence_chain_walkChristian König1-2/+2
Use unrcu_pointer() instead of the manual cast. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220518085446.31338-1-christian.koenig@amd.com
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-329/+334
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-13dma-buf: ensure unique directory name for dmabuf statsCharan Teja Kalla1-0/+8
The dmabuf file uses get_next_ino()(through dma_buf_getfile() -> alloc_anon_inode()) to get an inode number and uses the same as a directory name under /sys/kernel/dmabuf/buffers/<ino>. This directory is used to collect the dmabuf stats and it is created through dma_buf_stats_setup(). At current, failure to create this directory entry can make the dma_buf_export() to fail. Now, as the get_next_ino() can definitely give a repetitive inode no causing the directory entry creation to fail with -EEXIST. This is a problem on the systems where dmabuf stats functionality is enabled on the production builds can make the dma_buf_export(), though the dmabuf memory is allocated successfully, to fail just because it couldn't create stats entry. This issue we are able to see on the snapdragon system within 13 days where there already exists a directory with inode no "122602" so dma_buf_stats_setup() failed with -EEXIST as it is trying to create the same directory entry. To make the dentry name as unique, use the dmabuf fs specific inode which is based on the simple atomic variable increment. There is tmpfs subsystem too which relies on its own inode generation rather than relying on the get_next_ino() for the same reason of avoiding the duplicate inodes[1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/patch/?id=e809d5f0b5c912fe981dce738f3283b2010665f0 Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: <stable@vger.kernel.org> # 5.15.x+ Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1652441296-1986-1-git-send-email-quic_charante@quicinc.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-05-10dma-buf: call dma_buf_stats_setup after dmabuf is in valid listCharan Teja Reddy1-4/+4
When dma_buf_stats_setup() fails, it closes the dmabuf file which results into the calling of dma_buf_file_release() where it does list_del(&dmabuf->list_node) with out first adding it to the proper list. This is resulting into panic in the below path: __list_del_entry_valid+0x38/0xac dma_buf_file_release+0x74/0x158 __fput+0xf4/0x428 ____fput+0x14/0x24 task_work_run+0x178/0x24c do_notify_resume+0x194/0x264 work_pending+0xc/0x5f0 Fix it by moving the dma_buf_stats_setup() after dmabuf is added to the list. Fixes: bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs") Signed-off-by: Charan Teja Reddy <quic_charante@quicinc.com> Tested-by: T.J. Mercier <tjmercier@google.com> Acked-by: T.J. Mercier <tjmercier@google.com> Cc: <stable@vger.kernel.org> # 5.15.x+ Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1652125797-2043-1-git-send-email-quic_charante@quicinc.com
2022-05-10dma-buf: add the name field to the table headerYuanzheng Song1-2/+2
'cat /sys/kernel/debug/dma_buf/bufinfo' will print the Dma-buf Objects' information when the CONFIG_DEBUG_FS=y. However, the printed table header information does not contain the name field. So we need to add the name field to the table header and use the '<none>' to replace the empty buf_obj->name. Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220428063924.3570409-1-songyuanzheng@huawei.com
2022-05-04dma-buf/sync_file: cleanup fence merging a bitChristian König1-14/+7
krealloc_array() ignores attempts to reduce the array size, so the attempt to save memory is completely pointless here. Also move testing for the no fence case into sync_file_set_fence(), this way we don't even touch the fence array when we don't have any fences. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220426124637.329764-1-christian.koenig@amd.com
2022-04-18Merge drm/drm-next into drm-misc-nextPaul Cercueil5-68/+368
drm/drm-next has a build fix for the NewVision NV3052C panel (drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be merged back to drm-misc-next, as it was failing to build there. Signed-off-by: Paul Cercueil <paul@crapouillou.net>
2022-04-12Merge tag 'drm-misc-next-2022-04-07' of ↵Dave Airlie3-55/+153
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.19: UAPI Changes: Cross-subsystem Changes: Core Changes: - atomic: Add atomic_print_state to private objects - edid: Constify the EDID parsing API, rework of the API - dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make dma_resv_excl_fence private - format: Support monochrome formats - fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist corruption fix - selftests: several small fixes - ttm: Rework bulk move handling Driver Changes: - Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate - bridge: conversions to devm_drm_of_get_bridge and panel_bridge, autosuspend for analogix_dp, audio support for it66121, DSI to DPI support for tc358767, PLL fixes and I2C support for icn6211 - bridge_connector: Enable HPD if supported - etnaviv: fencing improvements - gma500: GEM and GTT improvements, connector handling fixes - komeda: switch to plane reset helper - mediatek: MIPI DSI improvements - omapdrm: GEM improvements - panel: DT bindings fixes for st7735r, few fixes for ssd130x, new panels: ltk035c5444t, B133UAN01, NV3052C - qxl: Allow to run on arm64 - sysfb: Kconfig rework, support for VESA graphic mode selection - vc4: Add a tracepoint for CL submissions, HDMI YUV output, HDMI and clock improvements - virtio: Remove restriction of non-zero blob_flags, - vmwgfx: support for CursorMob and CursorBypass 4, various improvements and small fixes [airlied: fixup conflict with newvision panel callbacks] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085940.pnflvjojs4qw4b77@houat
2022-04-07dma-buf: drop seq count based updateChristian König2-22/+13
This should be possible now since we don't have the distinction between exclusive and shared fences any more. The only possible pitfall is that a dma_fence would be reused during the RCU grace period, but even that could be handled with a single extra check. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-15-christian.koenig@amd.com
2022-04-07dma-buf: wait for map to complete for static attachmentsChristian König1-3/+15
We have previously done that in the individual drivers but it is more defensive to move that into the common code. Dynamic attachments should wait for map operations to complete by themselves. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-12-christian.koenig@amd.com
2022-04-07dma-buf: add DMA_RESV_USAGE_BOOKKEEP v3Christian König2-3/+3
Add an usage for submissions independent of implicit sync but still interesting for memory management. v2: cleanup the kerneldoc a bit v3: separate amdgpu changes from this Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-10-christian.koenig@amd.com
2022-04-07dma-buf: add DMA_RESV_USAGE_KERNEL v3Christian König2-2/+2
Add an usage for kernel submissions. Waiting for those are mandatory for dynamic DMA-bufs. As a precaution this patch also changes all occurrences where fences are added as part of memory management in TTM, VMWGFX and i915 to use the new value because it now becomes possible for drivers to ignore fences with the WRITE usage. v2: use "must" in documentation, fix whitespaces v3: separate out some driver changes and better document why some changes should still be part of this patch. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-5-christian.koenig@amd.com
2022-04-07dma-buf & drm/amdgpu: remove dma_resv workaroundChristian König1-212/+141
Rework the internals of the dma_resv object to allow adding more than one write fence and remember for each fence what purpose it had. This allows removing the workaround from amdgpu which used a container for this instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-4-christian.koenig@amd.com
2022-04-07dma-buf: specify usage while adding fences to dma_resv obj v7Christian König2-85/+64
Instead of distingting between shared and exclusive fences specify the fence usage while adding fences. Rework all drivers to use this interface instead and deprecate the old one. v2: some kerneldoc comments suggested by Daniel v3: fix a missing case in radeon v4: rebase on nouveau changes, fix lockdep and temporary disable warning v5: more documentation updates v6: separate internal dma_resv changes from this patch, avoids to disable warning temporary, rebase on upstream changes v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com
2022-04-07dma-buf: add enum dma_resv_usage v4Christian König3-43/+46
This change adds the dma_resv_usage enum and allows us to specify why a dma_resv object is queried for its containing fences. Additional to that a dma_resv_usage_rw() helper function is added to aid retrieving the fences for a read or write userspace submission. This is then deployed to the different query functions of the dma_resv object and all of their users. When the write paratermer was previously true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise. v2: add KERNEL/OTHER in separate patch v3: some kerneldoc suggestions by Daniel v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in the rebase pointed out by Bas. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-2-christian.koenig@amd.com
2022-04-06dma-buf/drivers: make reserving a shared slot mandatory v4Christian König2-39/+35
Audit all the users of dma_resv_add_excl_fence() and make sure they reserve a shared slot also when only trying to add an exclusive fence. This is the next step towards handling the exclusive fence like a shared one. v2: fix missed case in amdgpu v3: and two more radeon, rename function v4: add one more case to TTM, fix i915 after rebase Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com
2022-04-05Merge drm/drm-next into drm-misc-nextMaxime Ripard4-21/+23
Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-04-05dma-buf: finally make dma_resv_excl_fence private v2Christian König1-0/+6
Drivers should never touch this directly. v2: fix rebase clash Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-10-christian.koenig@amd.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2022-04-03dma-buf: add dma_resv_get_singleton v2Christian König1-0/+54
Add a function to simplify getting a single fence for all the fences in the dma_resv object. v2: fix ref leak in error handling Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-3-christian.koenig@amd.com
2022-04-03drivers/dma-buf: dma-buf.c: fix a typoSui Jingfeng1-1/+1
Signed-off-by: Sui Jingfeng <15330273260@189.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20220402134413.1705246-1-15330273260@189.cn Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2022-04-01dma-buf: drop the DAG approach for the dma_resv object v3Christian König1-15/+1
So far we had the approach of using a directed acyclic graph with the dma_resv obj. This turned out to have many downsides, especially it means that every single driver and user of this interface needs to be aware of this restriction when adding fences. If the rules for the DAG are not followed then we end up with potential hard to debug memory corruption, information leaks or even elephant big security holes because we allow userspace to access freed up memory. Since we already took a step back from that by always looking at all fences we now go a step further and stop dropping the shared fences when a new exclusive one is added. v2: Drop some now superflous documentation v3: Add some more documentation for the new handling. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-11-christian.koenig@amd.com
2022-03-29dma-buf: handle empty dma_fence_arrays gracefullyChristian König1-0/+5
A bug inside the new sync-file merge code created empty dma_fence_array instances. Warn about that and handle those without crashing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220329070001.134180-2-christian.koenig@amd.com
2022-03-29dma-buf/sync-file: fix logic error in new fence merge codeChristian König1-1/+1
When the array is empty because everything is signaled we can't use add_fence() to add something because that would filter the signaled fence again. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 519f490db07e ("dma-buf/sync-file: fix warning about fence containers") Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220329070001.134180-1-christian.koenig@amd.com
2022-03-25dma-buf/sync-file: fix warning about fence containersChristian König1-68/+73
The dma_fence_chain containers can show up in sync_files as well resulting in warnings that those can't be added to dma_fence_array containers when merging multiple sync_files together. Solve this by using the dma_fence_unwrap iterator to deep dive into the contained fences and then add those flatten out into a dma_fence_array. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220311110244.1245-2-christian.koenig@amd.com
2022-03-25dma-buf: add dma_fence_unwrap v2Christian König3-0/+263
Add a general purpose helper to deep dive into dma_fence_chain/dma_fence_array structures and iterate over all the fences in them. This is useful when we need to flatten out all fences in those structures. v2: some selftests cleanup, improved function naming and documentation Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220311110244.1245-1-christian.koenig@amd.com
2022-03-25dma-buf: Add dma_fence_array_for_each (v2)Christian König1-0/+27
Add a helper to iterate over all fences in a dma_fence_array object. v2 (Jason Ekstrand) - Return NULL from dma_fence_array_first if head == NULL. This matches the iterator behavior of dma_fence_chain_for_each in that it iterates zero times if head == NULL. - Return NULL from dma_fence_array_next if index > array->num_fences. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610210925.642582-2-jason@jlekstrand.net Signed-off-by: Christian König <christian.koenig@amd.com>
2022-03-24dma-buf: finally make the dma_resv_list private v2Christian König1-0/+11
Drivers should never touch this directly. v2: drop kerneldoc for now internal handling Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-2-christian.koenig@amd.com
2022-03-24dma-buf: add dma_resv_replace_fences v2Christian König1-0/+45
This function allows to replace fences from the shared fence list when we can gurantee that the operation represented by the original fence has finished or no accesses to the resources protected by the dma_resv object any more when the new fence finishes. Then use this function in the amdkfd code when BOs are unmapped from the process. v2: add an example when this is usefull. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-1-christian.koenig@amd.com
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of ↵Dave Airlie3-18/+45
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-14Backmerge tag 'v5.17-rc4' of ↵Dave Airlie1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Daniel asked for this for some intel deps, so let's do it now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-11Merge tag 'drm-intel-next-2022-02-08' of ↵Dave Airlie3-21/+21
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
2022-02-08dma-buf: add dma_fence_chain_contained helperChristian König1-4/+2
It's a reoccurring pattern that we need to extract the fence from a dma_fence_chain object. Add a helper for this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204100429.2049-6-christian.koenig@amd.com
2022-02-08dma-buf: warn about containers in dma_resv objectChristian König1-0/+5
Drivers should not add containers as shared fences to the dma_resv object, instead each fence should be added individually. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204100429.2049-5-christian.koenig@amd.com