summaryrefslogtreecommitdiffstats
path: root/drivers/dma-buf/dma-buf.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25Merge tag 'v5.11-rc5' of ↵Dave Airlie1-4/+17
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-01-18dma-buf: Add debug optionDaniel Vetter1-4/+42
We have too many people abusing the struct page they can get at but really shouldn't in importers. Aside from that the backing page might simply not exist (for dynamic p2p mappings) looking at it and using it e.g. for mmap can also wreak the page handling of the exporter completely. Importers really must go through the proper interface like dma_buf_mmap for everything. I'm semi-tempted to enforce this for dynamic importers since those really have no excuse at all to break the rules. Unfortuantely we can't store the right pointers somewhere safe to make sure we oops on something recognizable, so best is to just wrangle them a bit by flipping all the bits. At least on x86 kernel addresses have all their high bits sets and the struct page array is fairly low in the kernel mapping, so flipping all the bits gives us a very high pointer in userspace and hence excellent chances for an invalid dereference. v2: Add a note to the @map_dma_buf hook that exporters shouldn't do fancy caching tricks, which would blow up with this address scrambling trick here (Chris) Enable by default when CONFIG_DMA_API_DEBUG is enabled. v3: Only one copy of the mangle/unmangle code (Christian) v4: #ifdef, not #if (0day) v5: sg_table can also be an ERR_PTR (Chris, Christian) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Stevens <stevensd@chromium.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210115164739.3958206-1-daniel.vetter@ffwll.ch
2021-01-07dmabuf: fix use-after-free of dmabuf's file->f_inodeCharan Teja Reddy1-4/+17
It is observed 'use-after-free' on the dmabuf's file->f_inode with the race between closing the dmabuf file and reading the dmabuf's debug info. Consider the below scenario where P1 is closing the dma_buf file and P2 is reading the dma_buf's debug info in the system: P1 P2 dma_buf_debug_show() dma_buf_put() __fput() file->f_op->release() dput() .... dentry_unlink_inode() iput(dentry->d_inode) (where the inode is freed) mutex_lock(&db_list.lock) read 'dma_buf->file->f_inode' (the same inode is freed by P1) mutex_unlock(&db_list.lock) dentry->d_op->d_release()--> dma_buf_release() ..... mutex_lock(&db_list.lock) removes the dmabuf from the list mutex_unlock(&db_list.lock) In the above scenario, when dma_buf_put() is called on a dma_buf, it first frees the dma_buf's file->f_inode(=dentry->d_inode) and then removes this dma_buf from the system db_list. In between P2 traversing the db_list tries to access this dma_buf's file->f_inode that was freed by P1 which is a use-after-free case. Since, __fput() calls f_op->release first and then later calls the d_op->d_release, move the dma_buf's db_list removal from d_release() to f_op->release(). This ensures that dma_buf's file->f_inode is not accessed after it is released. Cc: <stable@vger.kernel.org> # 5.4.x- Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1609857399-31549-1-git-send-email-charante@codeaurora.org
2020-12-16dma-buf: doc polish for pin/unpinDaniel Vetter1-3/+16
Motivated by a discussion with Christian and Thomas: Try to untangle a bit what's relevant for importers and what's relevant for exporters. Also add an assert that really only dynamic importers use the api function, anything else doesn't make sense. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-4-daniel.vetter@ffwll.ch
2020-12-16dma-buf: begin/end_cpu might lock the dma_resv lockDaniel Vetter1-0/+4
At least amdgpu and i915 do, so lets just document this as the rule. v2: Works better with less typos (intel-gfx-ci) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201214171622.3868883-1-daniel.vetter@ffwll.ch
2020-12-16dma-buf: some kerneldoc formatting fixesDaniel Vetter1-13/+18
Noticed while reviewing the output. Adds a bunch more links and fixes the function interface quoting. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-2-daniel.vetter@ffwll.ch
2020-12-16dma-buf: Remove kmap kerneldoc vestigesDaniel Vetter1-6/+14
Also try to clarify a bit when dma_buf_begin/end_cpu_access should be called. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-1-daniel.vetter@ffwll.ch
2020-11-19mm: introduce vma_set_file function v5Christian König1-2/+1
Add the new vma_set_file() function to allow changing vma->vm_file with the necessary refcount dance. v2: add more users of this. v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup, add comments why we drop the reference on two occasions. v4: make it clear that changing an anonymous vma is illegal. v5: move vma_set_file to mm/util.c Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2) Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/399360/
2020-11-19mm: mmap: fix fput in error path v2Christian König1-17/+3
Patch "495c10cc1c0c CHROMIUM: dma-buf: restore args..." adds a workaround for a bug in mmap_region. As the comment states ->mmap() callback can change vma->vm_file and so we might call fput() on the wrong file. Revert the workaround and proper fix this in mmap_region. v2: drop the extra if in dma_buf_mmap as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/399359/
2020-11-05Revert "mm: mmap: fix fput in error path v2"Christian König1-3/+17
The kernel test robot is not happy with that. This reverts commit 0227da01f2559626396af5f6c7453360db86c1f6. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/394772/
2020-11-05Revert "mm: introduce vma_set_file function v4"Christian König1-1/+2
The kernel test robot is not happy with that. This reverts commit 2b5b95b1ff3d70a95013a45e3b5b90f1daf42348. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-05dma-buf: Fix static checker warningJianxin Xiong1-1/+1
Here is the warning message: drivers/dma-buf/dma-buf.c:917 dma_buf_map_attachment() error: 'sg_table' dereferencing possible ERR_PTR() Fix by adding error checking before dereferencing the pointer. Fixes: ac80cd17a615 ("dma-buf: Clarify that dma-buf sg lists are page aligned") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/398485/
2020-11-05mm: introduce vma_set_file function v4Christian König1-2/+1
Add the new vma_set_file() function to allow changing vma->vm_file with the necessary refcount dance. v2: add more users of this. v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup, add comments why we drop the reference on two occasions. v4: make it clear that changing an anonymous vma is illegal. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2) Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-05mm: mmap: fix fput in error path v2Christian König1-17/+3
Patch "495c10cc1c0c CHROMIUM: dma-buf: restore args..." adds a workaround for a bug in mmap_region. As the comment states ->mmap() callback can change vma->vm_file and so we might call fput() on the wrong file. Revert the workaround and proper fix this in mmap_region. v2: drop the extra if in dma_buf_mmap as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://patchwork.freedesktop.org/patch/394772/
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard1-0/+2
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-10-15dma-buf: Clarify that dma-buf sg lists are page alignedJianxin Xiong1-0/+21
The dma-buf API have been used under the assumption that the sg lists returned from dma_buf_map_attachment() are fully page aligned. Lots of stuff can break otherwise all over the place. Clarify this in the documentation and add a check when DMA API debug is enabled. Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1602692161-107096-1-git-send-email-jianxin.xiong@intel.com
2020-09-29dma-buf: Use struct dma_buf_map in dma_buf_vunmap() interfacesThomas Zimmermann1-4/+4
This patch updates dma_buf_vunmap() and dma-buf's vunmap callback to use struct dma_buf_map. The interfaces used to receive a buffer address. This address is now given in an instance of the structure. Users of the functions are updated accordingly. This is only an interface change. It is currently expected that dma-buf memory can be accessed with system memory load/store operations. v2: * include dma-buf-heaps and i915 selftests (kernel test robot) * initialize cma_obj before using it in drm_gem_cma_free_object() (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-4-tzimmermann@suse.de
2020-09-29dma-buf: Use struct dma_buf_map in dma_buf_vmap() interfacesThomas Zimmermann1-12/+16
This patch updates dma_buf_vmap() and dma-buf's vmap callback to use struct dma_buf_map. The interfaces used to return a buffer address. This address now gets stored in an instance of the structure that is given as an additional argument. The functions return an errno code on errors. Users of the functions are updated accordingly. This is only an interface change. It is currently expected that dma-buf memory can be accessed with system memory load/store operations. v3: * update fastrpc driver (kernel test robot) v2: * always clear map parameter in dma_buf_vmap() (Daniel) * include dma-buf-heaps and i915 selftests (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-3-tzimmermann@suse.de
2020-09-29dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptrThomas Zimmermann1-7/+7
The new type struct dma_buf_map represents a mapping of dma-buf memory into kernel space. It contains a flag, is_iomem, that signals users to access the mapped memory with I/O operations instead of regular loads and stores. It was assumed that DMA buffer memory can be accessed with regular load and store operations. Some architectures, such as sparc64, require the use of I/O operations to access dma-map buffers that are located in I/O memory. Providing struct dma_buf_map allows drivers to implement this. This was specifically a problem when refreshing the graphics framebuffer on such systems. [1] As the first step, struct dma_buf stores an instance of struct dma_buf_map internally. Afterwards, dma-buf's vmap and vunmap interfaces are be converted. Finally, affected drivers can be fixed. v3: * moved documentation into separate patch * test for NULL pointers with !<ptr> [1] https://lore.kernel.org/dri-devel/20200725191012.GA434957@ravnborg.org/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-2-tzimmermann@suse.de
2020-09-21dmabuf: fix NULL pointer dereference in dma_buf_release()Charan Teja Reddy1-0/+2
NULL pointer dereference is observed while exporting the dmabuf but failed to allocate the 'struct file' which results into the dropping of the allocated dentry corresponding to this file in the dmabuf fs, which is ending up in dma_buf_release() and accessing the uninitialzed dentry->d_fsdata. Call stack on 5.4 is below: dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88 __dentry_kill+0x294/0x31c fs/dcache.c:584 dentry_kill fs/dcache.c:673 [inline] dput+0x250/0x380 fs/dcache.c:859 path_put+0x24/0x40 fs/namei.c:485 alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235 dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline] dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585 Fix this by checking for the valid pointer in the dentry->d_fsdata. Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/391319/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-09-03dma-buf: Fix kerneldoc of dma_buf_set_name()Krzysztof Kozlowski1-3/+3
Fix W=1 compile warnings (invalid kerneldoc): drivers/dma-buf/dma-buf.c:328: warning: Function parameter or member 'dmabuf' not described in 'dma_buf_set_name' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819175134.19261-1-krzk@kernel.org
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie1-33/+32
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-10dmabuf: use spinlock to access dmabuf->nameCharan Teja Kalla1-4/+7
There exists a sleep-while-atomic bug while accessing the dmabuf->name under mutex in the dmabuffs_dname(). This is caused from the SELinux permissions checks on a process where it tries to validate the inherited files from fork() by traversing them through iterate_fd() (which traverse files under spin_lock) and call match_file(security/selinux/hooks.c) where the permission checks happen. This audit information is logged using dump_common_audit_data() where it calls d_path() to get the file path name. If the file check happen on the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to access dmabuf->name. The flow will be like below: flush_unauthorized_files() iterate_fd() spin_lock() --> Start of the atomic section. match_file() file_has_perm() avc_has_perm() avc_audit() slow_avc_audit() common_lsm_audit() dump_common_audit_data() audit_log_d_path() d_path() dmabuffs_dname() mutex_lock()--> Sleep while atomic. Call trace captured (on 4.19 kernels) is below: ___might_sleep+0x204/0x208 __might_sleep+0x50/0x88 __mutex_lock_common+0x5c/0x1068 __mutex_lock_common+0x5c/0x1068 mutex_lock_nested+0x40/0x50 dmabuffs_dname+0xa0/0x170 d_path+0x84/0x290 audit_log_d_path+0x74/0x130 common_lsm_audit+0x334/0x6e8 slow_avc_audit+0xb8/0xf8 avc_has_perm+0x154/0x218 file_has_perm+0x70/0x180 match_file+0x60/0x78 iterate_fd+0x128/0x168 selinux_bprm_committing_creds+0x178/0x248 security_bprm_committing_creds+0x30/0x48 install_exec_creds+0x1c/0x68 load_elf_binary+0x3a4/0x14e0 search_binary_handler+0xb0/0x1e0 So, use spinlock to access dmabuf->name to avoid sleep-while-atomic. Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Charan Teja Kalla <charante@codeaurora.org> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by: Christian König <christian.koenig@amd.com> [sumits: added comment to spinlock_t definition to avoid warning] Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
2020-06-30Merge tag 'drm-misc-next-2020-06-26' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: Cross-subsystem Changes: - Improve dma-buf docs. Core Changes: - Add NV15, Q410, Q401 yuv formats. - Add uncompressed AFBC modifier. - Add DP helepr for reading Ignore MSA from DPCD. - Add missing panel type for some panels - Optimize drm/mm hole handling. - Constify connector to infoframe functions. - Add debugfs for VRR monitor range. Driver Changes: - Assorted small bugfixes in panfrost, malidp, panel/otm8009a. - Convert tfp410 dt bindings to yaml, and rework time calculations. - Add support for a few more simple panels. - Cleanups and optimizations for ast. - Allow adv7511 and simple-bridge to be used without connector creation. - Cleanups to dw-hdmi function prototypes. - Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it. - Remove unused header file from dw-mipi-dsi - Begin removing ttm_bo->offset. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
2020-06-25dma-buf: Move dma_buf_release() from fops to dentry_opsSumit Semwal1-29/+25
Charan Teja reported a 'use-after-free' in dmabuffs_dname [1], which happens if the dma_buf_release() is called while the userspace is accessing the dma_buf pseudo fs's dmabuffs_dname() in another process, and dma_buf_release() releases the dmabuf object when the last reference to the struct file goes away. I discussed with Arnd Bergmann, and he suggested that rather than tying the dma_buf_release() to the file_operations' release(), we can tie it to the dentry_operations' d_release(), which will be called when the last ref to the dentry is removed. The path exercised by __fput() calls f_op->release() first, and then calls dput, which eventually calls d_op->d_release(). In the 'normal' case, when no userspace access is happening via dma_buf pseudo fs, there should be exactly one fd, file, dentry and inode, so closing the fd will kill of everything right away. In the presented case, the dentry's d_release() will be called only when the dentry's last ref is released. Therefore, lets move dma_buf_release() from fops->release() to d_ops->d_release() Many thanks to Arnd for his FS insights :) [1]: https://lore.kernel.org/patchwork/patch/1238278/ Fixes: bb2bb9030425 ("dma-buf: add DMA_BUF_SET_NAME ioctls") Reported-by: syzbot+3643a18836bce555bff6@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> [5.3+] Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Tested-by: Charan Teja Reddy <charante@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200611114418.19852-1-sumit.semwal@linaro.org
2020-06-24dma-buf: minor doc touch-upsDaniel Vetter1-3/+3
Just some tiny edits: - fix link to struct dma_fence - give slightly more meaningful title - the polling here is about implicit fences, explicit fences (in sync_file or drm_syncobj) also have their own polling v2: I misplaced the .rst include change corresponding to this patch. Reviewed-by: Thomas Hellstrom <thomas.hellstrom@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612070535.1778368-1-daniel.vetter@ffwll.ch
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+2
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-04-30dma-buf: fix documentation build warningsRandy Dunlap1-2/+2
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
2020-04-27dma-buf: Fix SET_NAME ioctl uapiDaniel Vetter1-1/+2
The uapi is the same on 32 and 64 bit, but the number isn't. Everyone who botched this please re-read: https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html Also, the type argument for the ioctl macros is for the type the void __user *arg pointer points at, which in this case would be the variable-sized char[] of a 0 terminated string. So this was botched in more than just the usual ways. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Chenbo Feng <fengc@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: minchan@kernel.org Cc: surenb@google.com Cc: jenhaochen@google.com Cc: Martin Liu <liumartin@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Martin Liu <liumartin@google.com> Reviewed-by: Martin Liu <liumartin@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: updated some checkpatch fixes, corrected author email] Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch
2020-04-01dma-buf: add peer2peer flagChristian König1-0/+2
Add a peer2peer flag noting that the importer can deal with device resources which are not backed by pages. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/359286/
2020-03-12Merge tag 'drm-misc-next-2020-03-09' of ↵Dave Airlie1-9/+101
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector - fbdev: some cleanups and dead-code removal - Conversions to simple-encoder - zero-length array removal - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida KD35T133, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour
2020-02-27dma-buf: make move_notify mandatory if importer_ops are providedChristian König1-8/+7
This makes the move_notify callback mandatory when the importer_ops are provided. Since amdgpu is now migrated it doesn't make much sense anymore to allow this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353995/?series=73646&rev=1
2020-02-27dma-buf: drop dynamic_mapping flagChristian König1-3/+2
Instead use the pin() callback to detect dynamic DMA-buf handling. Since amdgpu is now migrated it doesn't make much sense to keep the extra flag. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353997/?series=73646&rev=1
2020-02-27dma-buf: add dynamic DMA-buf handling v15Christian König1-8/+102
On the exporter side we add optional explicit pinning callbacks. Which are called when the importer doesn't implement dynamic handling, move notification or need the DMA-buf locked in place for its use case. On the importer side we add an optional move_notify callback. This callback is used by the exporter to inform the importers that their mappings should be destroyed as soon as possible. This allows the exporter to provide the mappings without the need to pin the backing store. v2: don't try to invalidate mappings when the callback is NULL, lock the reservation obj while using the attachments, add helper to set the callback v3: move flag for invalidation support into the DMA-buf, use new attach_info structure to set the callback v4: use importer_priv field instead of mangling exporter priv. v5: drop invalidation_supported flag v6: squash together with pin/unpin changes v7: pin/unpin takes an attachment now v8: nuke dma_buf_attachment_(map|unmap)_locked, everything is now handled backward compatible v9: always cache when export/importer don't agree on dynamic handling v10: minimal style cleanup v11: drop automatically re-entry avoidance v12: rename callback to move_notify v13: add might_lock in appropriate places v14: rebase on separated locking change v15: add EXPERIMENTAL flag, some more code comments Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353993/?series=73646&rev=1
2020-02-27dma-buf: free dmabuf->name in dma_buf_release()Cong Wang1-0/+1
dma-buf name can be set via DMA_BUF_SET_NAME ioctl, but once set it never gets freed. Free it in dma_buf_release(). Fixes: bb2bb9030425 ("dma-buf: add DMA_BUF_SET_NAME ioctls") Reported-by: syzbot+b2098bc44728a4efb3e9@syzkaller.appspotmail.com Cc: Greg Hackmann <ghackmann@google.com> Cc: Chenbo Feng <fengc@google.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191227063204.5813-1-xiyou.wangcong@gmail.com
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter1-60/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-3/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-25dma-buf: Drop dma_buf_k(un)mapDaniel Vetter1-60/+3
It's unused. 10 years ago, back when 32bit was still fairly common and trying to not exhaust vmalloc space sounded like a worthwhile goal, adding these to dma_buf made sense. Reality is that they simply never caught on, and nowadays everyone who needs plenty of buffers will run in 64bit mode anyway. Also update the docs in this area to adjust them to reality. The actual hooks in dma_buf_ops will be removed once all the implementations are gone. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-10-daniel.vetter@ffwll.ch
2019-10-24dma-buf: stop using the dmabuf->lock so much v2Christian König1-16/+2
The attachment list is now protected by the dma_resv object. Stop holding the dma_buf->lock while calling ->attach/->detach, this allows for concurrent attach/detach operations. v2: cleanup commit message and locking in _debug_show() Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/336790
2019-10-24dma-buf: change DMA-buf locking convention v3Christian König1-17/+101
This patch is a stripped down version of the locking changes necessary to support dynamic DMA-buf handling. It adds a dynamic flag for both importers as well as exporters so that drivers can choose if they want the reservation object locked or unlocked during mapping of attachments. For compatibility between drivers we cache the DMA-buf mapping during attaching an importer as soon as exporter/importer disagree on the dynamic handling. Issues and solutions we considered: - We can't change all existing drivers, and existing improters have strong opinions about which locks they're holding while calling dma_buf_attachment_map/unmap. Exporters also have strong opinions about which locks they can acquire in their ->map/unmap callbacks, levaing no room for change. The solution to avoid this was to move the actual map/unmap out from this call, into the attach/detach callbacks, and cache the mapping. This works because drivers don't call attach/detach from deep within their code callchains (like deep in memory management code called from cs/execbuf ioctl), but directly from the fd2handle implementation. - The caching has some troubles on some soc drivers, which set other modes than DMA_BIDIRECTIONAL. We can't have 2 incompatible mappings, and we can't re-create the mapping at _map time due to the above locking fun. We very carefuly step around that by only caching at attach time if the dynamic mode between importer/expoert mismatches. - There's been quite some discussion on dma-buf mappings which need active cache management, which would all break down when caching, plus we don't have explicit flush operations on the attachment side. The solution to this was to shrug and keep the current discrepancy between what the dma-buf docs claim and what implementations do, with the hope that the begin/end_cpu_access hooks are good enough and that all necessary flushing to keep device mappings consistent will be done there. v2: cleanup set_name merge, improve kerneldoc v3: update commit message, kerneldoc and cleanup _debug_show() Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/336788/
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann1-3/+1
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-16dma-buf: Restore seqlock around dma_resv updatesChris Wilson1-5/+26
This reverts 67c97fb79a7f ("dma-buf: add reservation_object_fences helper") dd7a7d1ff2f1 ("drm/i915: use new reservation_object_fences helper") 0e1d8083bddb ("dma-buf: further relax reservation_object_add_shared_fence") 5d344f58da76 ("dma-buf: nuke reservation_object seq number") The scenario that defeats simply grabbing a set of shared/exclusive fences and using them blissfully under RCU is that any of those fences may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this scenario, while keeping the rcu_read_lock we need to establish that no fence was changed in the dma_resv after a read (or full) memory barrier. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk
2019-08-13dma-buf: rename reservation_object to dma_resvChristian König1-16/+16
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/323401/
2019-08-10dma-buf: add reservation_object_fences helperChristian König1-26/+5
Add a new helper to get a consistent set of pointers from the reservation object. While at it group all access helpers together in the header file. v2: correctly return shared_count as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/322378/?series=64837&rev=1
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+166
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14dma-buf: add show_fdinfo handlerGreg Hackmann1-0/+15
The show_fdinfo handler exports the same information available through debugfs on a per-buffer basis. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com
2019-06-14dma-buf: add DMA_BUF_SET_NAME ioctlsGreg Hackmann1-3/+62
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets userspace processes attach a free-form name to each buffer. This information can be extremely helpful for tracking and accounting shared buffers. For example, on Android, we know what each buffer will be used for at allocation time: GL, multimedia, camera, etc. The userspace allocator can use DMA_BUF_SET_NAME to associate that information with the buffer, so we can later give developers a breakdown of how much memory they're allocating for graphics, camera, etc. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com
2019-06-14dma-buf: give each buffer a full-fledged inodeGreg Hackmann1-6/+57
By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN can get a lot of fine-grained data about how shmem buffers are shared among processes. stat(2) on each entry gives the caller a unique ID (st_ino), the buffer's size (st_size), and even the number of pages currently charged to the buffer (st_blocks / 512). In contrast, all dma-bufs share the same anonymous inode. So while we can count how many dma-buf fds or mappings a process has, we can't get the size of the backing buffers or tell if two entries point to the same dma-buf. On systems with debugfs, we can get a per-buffer breakdown of size and reference count, but can't tell which processes are actually holding the references to each buffer. Replace the singleton inode with full-fledged inodes allocated by alloc_anon_inode(). This involves creating and mounting a mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-2-fengc@google.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 07:49:38 +0000