summaryrefslogtreecommitdiffstats
path: root/drivers/devfreq/devfreq.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-11PM / devfreq: add devfreq_suspend/resume() functionsLukasz Luba1-0/+44
This patch adds implementation for global suspend/resume for devfreq framework. System suspend will next use these functions. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-12-11PM / devfreq: add support for suspend/resume of a devfreq deviceLukasz Luba1-6/+41
The patch prepares devfreq device for handling suspend/resume functionality. The new fields will store needed information during this process. Devfreq framework handles opp-suspend DT entry and there is no need of modyfications in the drivers code. It uses atomic variables to make sure no race condition affects the process. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-12-11PM / devfreq: refactor set_target frequency functionLukasz Luba1-26/+36
The refactoring is needed for the new client in devfreq: suspend. To avoid code duplication, move it to the new local function devfreq_set_target. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: remove redundant null pointer check before kfreezhong jiang1-2/+1
kfree has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: stopping the governor before device_unregister()Vincent Donnefort1-5/+4
device_release() is freeing the resources before calling the device specific release callback which is, in the case of devfreq, stopping the governor. It is a problem as some governors are using the device resources. e.g. simpleondemand which is using the devfreq deferrable monitoring work. If it is not stopped before the resources are freed, it might lead to a use after free. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Reviewed-by: John Einar Reitan <john.reitan@arm.com> [cw00.choi: Fix merge conflict] Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Fix handling of min/max_freq == 0Matthias Kaehlcke1-12/+30
Commit ab8f58ad72c4 ("PM / devfreq: Set min/max_freq when adding the devfreq device") initializes df->min/max_freq with the min/max OPP when the device is added. Later commit f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") adds df->scaling_min/max_freq and the following to the frequency adjustment code: max_freq = MIN(devfreq->scaling_max_freq, devfreq->max_freq); With the current handling of min/max_freq this is incorrect: Even though df->max_freq is now initialized to a value != 0 user space can still set it to 0, in this case max_freq would be 0 instead of df->scaling_max_freq as intended. In consequence the frequency adjustment is not performed: if (max_freq && freq > max_freq) { freq = max_freq; To fix this set df->min/max freq to the min/max OPP in max/max_freq_store, when the user passes a value of 0. This also prevents df->max_freq from being set below the min OPP when df->min_freq is 0, and similar for min_freq. Since it is now guaranteed that df->min/max_freq can't be 0 the checks for this case can be removed. Fixes: f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Drop custom MIN/MAX macrosBjorn Andersson1-7/+4
Drop the custom MIN/MAX macros in favour of the standard min/max from kernel.h Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-10-02PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.Enric Balletbo i Serra1-4/+49
When the devfreq driver and the governor driver are built as modules, the call to devfreq_add_device() or governor_store() fails because the governor driver is not loaded at the time the devfreq driver loads. The devfreq driver has a build dependency on the governor but also should have a runtime dependency. We need to make sure that the governor driver is loaded before the devfreq driver. This patch fixes this bug by adding a try_then_request_governor() function. First tries to find the governor, and then, if it is not found, it requests the module and tries again. Fixes: 1b5c1be2c88e (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: Init user limits from OPP limits, not viceversaMatthias Kaehlcke1-6/+6
Commit ab8f58ad72c4 ("PM / devfreq: Set min/max_freq when adding the devfreq device") introduced the initialization of the user limits min/max_freq from the lowest/highest available OPPs. Later commit f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency") added scaling_min/max_freq, which actually represent the frequencies of the lowest/highest available OPP. scaling_min/ max_freq are initialized with the values from min/max_freq, which is totally correct in the context, but a bit awkward to read. Swap the initialization and assign scaling_min/max_freq with the OPP freqs and then the user limts min/max_freq with scaling_min/ max_freq. Needless to say that this change is a NOP, intended to improve readability. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-07-18PM / devfreq: use put_device() instead of kfree()Arvind Yadav1-1/+3
Never directly free @dev after calling device_register() or device_unregister(), even if device_register() returned an error. Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-7/+8
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-01-02PM / devfreq: Fix potential NULL pointer dereference in governor_storeGustavo A. R. Silva1-1/+2
df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2018-01-02PM / devfreq: Propagate error from devfreq_add_device()Bjorn Andersson1-1/+1
Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Remove unneeded conditional statementChanwoo Choi1-4/+3
The freq_table array of each devfreq device is always not NULL. In result, it is unneeded to check whether profile->freq_table is NULL or not. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Show the all available frequenciesChanwoo Choi1-11/+5
The commit a76caf55e5b35 ("thermal: Add devfreq cooling") allows the devfreq device to use the cooling device. When the cooling down are required, the devfreq_cooling.c disables the OPP entry with the dev_pm_opp_disable(). In result, 'available_frequencies'[1] sysfs node never came to show the all available frequencies. [1] /sys/class/devfreq/.../available_frequencies So, this patch uses the 'freq_table' in the 'struct devfreq_dev_profile' in order to show the all available frequencies. - If 'freq_table' is NULL, devfreq core initializes them by using OPP values. - If 'freq_table' is initialized, devfreq core just uses the 'freq_table'. And this patch adds some comment about the sort way of 'freq_table'. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Change return type of devfreq_set_freq_table()Chanwoo Choi1-9/+9
This patch changes the return type of devfreq_set_freq_table() from 'void' to 'int' in order to check whether it fails or not. And This patch just removes the 'devfreq' prefix and the description of function. Because the helper functions are only used by the devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Use the available min/max frequencyChanwoo Choi1-8/+32
The commit a76caf55e5b35 ("thermal: Add devfreq cooling") is able to disable OPP as a cooling device. In result, both update_devfreq() and {min|max}_freq_show() have to consider the 'opp->available' status of each OPP. So, this patch adds the 'scaling_{min|max}_freq' to struct devfreq in order to indicate the available mininum and maximum frequency by adjusting OPP interface such as dev_pm_opp_{disable|enable}(). The 'scaling_{min|max}_freq' are used for on both update_devfreq() and {min|max}_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26Revert "PM / devfreq: Add show_one macro to delete the duplicate code"Chanwoo Choi1-9/+11
This reverts commit 3104fa3081126c9bda35793af5f335d0ee0d5818. The {min|max}_freq_show() show the stored value of the struct devfreq. But, if the drivers/thermal/devfreq_cooling.c disables the specific frequency value, {min|max}_freq_show() have to check this situation before showing the stored value. So, this patch revert the macro in order to add the additional codes. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-10-26PM / devfreq: Set min/max_freq when adding the devfreq deviceChanwoo Choi1-0/+42
Prior to that, the min/max_freq of the devfreq device are always zero before the user changes the min/max_freq through sysfs entries. It might make the confusion for the min/max_freq. This patch initializes the available min/max_freq by using the OPP during adding the devfreq device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-08-28PM / devfreq: Fix memory leak when fail to register deviceChanwoo Choi1-1/+4
When the devfreq_add_device fails to register deivce, the memory leak of devfreq instance happen. So, this patch fix the memory leak issue. Before freeing the devfreq instance checks whether devfreq instance is NULL or not because the device_unregister() frees the devfreq instance when jumping to the 'err_init'. It is to prevent the duplicate the kfee(devfreq). Cc: stable@vger.kernel.org Fixes: ac4b281176a5 ("PM / devfreq: fix duplicated kfree on devfreq pointer") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-20Merge branch 'pm-devfreq'Rafael J. Wysocki1-28/+46
* pm-devfreq: PM / devfreq: Modify the device name as devfreq(X) for sysfs PM / devfreq: Simplify the sysfs name of devfreq-event device PM / devfreq: Remove unnecessary separate _remove_devfreq() PM / devfreq: Fix wrong trans_stat of passive devfreq device PM / devfreq: Fix available_governor sysfs PM / devfreq: exynos-ppmu: Show the registred device for ppmu device PM / devfreq: Fix the wrong description for userspace governor PM / devfreq: Fix the checkpatch warnings PM / devfreq: exynos-bus: Print the real clock rate of bus PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433 PM / devfreq: Don't delete sysfs group twice
2017-01-31PM / devfreq: Modify the device name as devfreq(X) for sysfsChanwoo Choi1-1/+3
This patch modifies the device name as devfreq(X) for sysfs by using the 'devfreq' prefix word instead of separate device name. On user-space aspect, user would find the some devfreq drvier with 'devfreq(X)' pattern. So, this patch modify the device name as following: - /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq(X) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Remove unnecessary separate _remove_devfreq()Chanwoo Choi1-16/+7
The _remove_devfreq() releases the all resources of the devfreq device. This function is only called in the devfreq_dev_release(). For that reason, the devfreq core doesn't need to leave the _remove_devfreq() separately. This patch releases the all resources in the devfreq_dev_release() and then removes the _remove_devfreq(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix wrong trans_stat of passive devfreq deviceChanwoo Choi1-1/+2
Until now, the trans_stat information of passive devfreq is not updated. This patch updates the trans_stat information after setting the target frequency of passive devfreq device. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix available_governor sysfsChanwoo Choi1-4/+27
The devfreq using passive governor is not able to change the governor. So, the user can not change the governor through 'available_governor' sysfs entry. Also, the devfreq which don't use the passive governor is not able to change to 'passive' governor on the fly. Fixes: 996133119f57 ("PM / devfreq: Add new passive governor") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-31PM / devfreq: Fix the checkpatch warningsChanwoo Choi1-6/+7
This patch just fixes the checkpatch warnings. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2017-01-30PM / OPP: Update OPP users to put referenceViresh Kumar1-10/+4
This patch updates dev_pm_opp_find_freq_*() routines to get a reference to the OPPs returned by them. Also updates the users of dev_pm_opp_find_freq_*() routines to call dev_pm_opp_put() after they are done using the OPPs. As it is guaranteed the that OPPs wouldn't get freed while being used, the RCU read side locking present with the users isn't required anymore. Drop it as well. This patch also updates all users of devfreq_recommended_opp() which was returning an OPP received from the OPP core. Note that some of the OPP core routines have gained rcu_read_{lock|unlock}() calls, as those still use RCU specific APIs within them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [Devfreq] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-27PM / OPP: Don't expose srcu_head to register notifiersViresh Kumar1-24/+2
Let the OPP core provide helpers to register notifiers for any device, instead of exposing srcu_head outside of the core. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03PM / devfreq: Fix the bug of devfreq_add_device when governor is NULLChanwoo Choi1-5/+10
This patch fixes the bug of devfreq_add_device(). The devfreq device must have the default governor. If find_devfreq_governor() returns error, devfreq_add_device() fail to add the devfreq instance. Fixes: 1b5c1be2c88e (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17PM / devfreq: correct comment typo.MyungJoo Ham1-1/+1
The function name in the comment was incorrect. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-10-11PM / devfreq: Skip status update on uninitialized previous_freqTobias Jakobi1-0/+4
In case devfreq->previous_freq is still uninitialized in devfreq_update_status(), i.e. it has value '0', the lookups in that function fail, eventually leading to some error message: [ 3.041292] devfreq bus_dmc: Couldn't update frequency transition information. Just skip the statup update in this situation. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-11PM / devfreq: Add proper locking around list_del()Axel Lin1-1/+3
Use devfreq_list_lock around list_del() to prevent list corruption. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06PM / devfreq: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make devfreq explicitly non-modularPaul Gortmaker1-12/+1
The Kconfig currently controlling compilation of this code is: menuconfig PM_DEVFREQ bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. This code wasn't using module_init, so we don't need to be concerned with altering the initcall level here. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file does export some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-23PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failedChanwoo Choi1-1/+4
This patch sends the DEVFREQ_POSTCHANGE notification when devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE should be paired. Fixes: 0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier) Reported-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-22PM / devfreq: fix initialization of current frequency in last statusLukasz Luba1-0/+1
Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: remove double put_deviceMyungJoo Ham1-1/+0
When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix double call put_deviceCai Zhiyong1-1/+0
1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix duplicated kfree on devfreq pointerMyungJoo Ham1-1/+0
device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: devm_kzalloc to have dev pointer more preciselyMyungJoo Ham1-9/+9
devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifierChanwoo Choi1-1/+162
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send the notification when the frequency of device is changed. This notifier has two state as following: - DEVFREQ_PRECHANGE : Notify it before chaning the frequency of device - DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device And this patch adds the resourced-managed function to release the resource automatically when error happen. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add devfreq_get_devfreq_by_phandle()Chanwoo Choi1-0/+44
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function which can find the instance of devfreq device by using phandle ("devfreq"). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-13PM / devfreq: Do not show statistics if it's not ready.MyungJoo Ham1-0/+2
Before this patch for a device without statistics support, $ cat trans_stat From : To : time(ms) Total transitions : 0 $ After this patch applied for such a device, $ cat trans_stat Not Supported. $ Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Modify the indentation of trans_stat sysfs for readabilityChanwoo Choi1-5/+5
This patch modifies the indentation of 'trans_stat' sysfs to improve readability. The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit. - Before apply this patch, -sh-3.2# cat trans_stat From : To :50000000100000000133000000200000000400000000 time(ms) *50000000: 0 0 0 0 7 1817635 100000000: 4 0 0 0 4 1590 133000000: 1 4 0 0 7 975 200000000: 2 2 7 0 1 2655 400000000: 0 2 5 12 0 1860 Total transition : 58 - After apply this patch, -sh-3.2# cat trans_stat From : To : 50000000 100000000 133000000 200000000 400000000 time(ms) * 50000000: 0 0 0 0 7 14405 100000000: 4 0 0 0 3 2015 133000000: 2 3 0 0 7 1020 200000000: 1 2 7 0 0 2970 400000000: 0 2 5 10 0 1575 Total transition : 53 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Set the freq_table of devfreq deviceChanwoo Choi1-2/+48
This patch initialize the freq_table array of each devfreq device by using the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework is not able to support the frequency transtion information through sysfs. The OPP core uses the integer type for the number of opps in the opp list and uses the 'unsigned long' type for each frequency. So, this patch modifies the type of some variable as following: - the type of freq_table : unsigned int -> unsigned long - the type of max_state : unsigned int -> int - Corrected types, format strings, mutex usages by MyungJoo Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Add show_one macro to delete the duplicate codeChanwoo Choi1-11/+9
This patch adds the 'show_one' macro to simplify the duplicate code of both max_freq_show() and min_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02PM / devfreq: fix double kfreeGeliang Tang1-2/+1
When device_register() fails, kfree(devfreq) is called already in devfreq_dev_release(), hence there is no need to call kfree(devfreq) in err_dev again. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30PM / devfreq: Fix governor_store()Tobias Jakobi1-1/+3
Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Fix incorrect type issue.Xiaolong Ye1-1/+1
time_in_state in struct devfreq is defined as unsigned long, so devm_kzalloc should use sizeof(unsigned long) as argument instead of sizeof(unsigned int), otherwise it will cause unexpected result in 64bit system. Signed-off-by: Xiaolong Ye <yexl@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 09:41:36 +0000