| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current naming is confusing and wrong. The Register Locator is
identified by the DSVSEC identifier, not an offset.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210618003009.956929-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The ACPI CXL Early Discovery Table (CEDT) includes a list of CXL memory
resources in CXL Fixed Memory Window Structures (CFMWS). Retrieve each
CFMWS in the CEDT and add a cxl_decoder object to the root port (root0)
for each memory resource.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/d2b73eecfb7ea22e1103f1894b271a89958b4c41.1623968958.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The base address for the Host Bridge port component registers is located
in the CXL Host Bridge Structure (CHBS) of the ACPI CXL Early Discovery
Table (CEDT). Retrieve the CHBS for each Host Bridge (ACPI0016 device)
and include that base address in the port object.
Co-developed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/a475ce137b899bc7ae5ba9550b5f198cb29ccbfd.1623968958.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While a memX device on /sys/bus/cxl represents a CXL memory expander
control interface, a pmemX device represents the persistent memory
sub-functionality. It bridges the CXL subystem to the libnvdimm nmemX
control interface.
With this skeleton ndctl can now see persistent memory devices on a
"CXL" bus. Later patches add support for translating libnvdimm native
commands to CXL commands.
# ndctl list -BDiu -b CXL
{
"provider":"CXL",
"dev":"ndbus1",
"dimms":[
{
"dev":"nmem1",
"state":"disabled"
},
{
"dev":"nmem0",
"state":"disabled"
}
]
}
Given nvdimm_bus_unregister() removes all devices on an ndbus0 the
cxl_pmem infrastructure needs to arrange ->remove() to be triggered on
cxl_nvdimm devices to keep their enabled state synchronized with the
registration state of their corresponding device on the nvdimm_bus. In
other words, always arrange for cxl_nvdimm_driver.remove() to unregister
nvdimms from an nvdimm_bus ahead of the bus being unregistered.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162380012696.3039556.4293801691038740850.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Register an 'nvdimm-bridge' device to act as an anchor for a libnvdimm
bus hierarchy. Also, flesh out the cxl_bus definition to allow a
cxl_nvdimm_bridge_driver to attach to the bridge and trigger the
nvdimm-bus registration.
The creation of the bridge is gated on the detection of a PMEM capable
address space registered to the root. The bridge indirection allows the
libnvdimm module to remain unloaded on platforms without PMEM support.
Given that the probing of ACPI0017 is asynchronous to CXL endpoint
devices, and the expectation that CXL endpoint devices register other
PMEM resources on the 'CXL' nvdimm bus, a workqueue is added. The
workqueue is needed to run bus_rescan_devices() outside of the
device_lock() of the nvdimm-bridge device to rendezvous nvdimm resources
as they arrive. For now only the bus is taken online/offline in the
workqueue.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909706.2993820.14051258608641140169.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Enable devices on the 'cxl' bus to be attached to drivers. The initial
user of this functionality is a driver for an 'nvdimm-bridge' device
that anchors a libnvdimm hierarchy attached to CXL persistent memory
resources. Other device types that will leverage this include:
cxl_port: map and use component register functionality (HDM Decoders)
cxl_nvdimm: translate CXL memory expander endpoints to libnvdimm
'nvdimm' objects
cxl_region: translate CXL interleave sets to libnvdimm 'region' objects
The pairing of devices to drivers is handled through the cxl_device_id()
matching to cxl_driver.id values. A cxl_device_id() of '0' indicates no
driver support.
In addition to ->match(), ->probe(), and ->remove() support for the
'cxl' bus introduce MODULE_ALIAS_CXL() to autoload modules containing
cxl-drivers. Drivers are added in follow-on changes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379909190.2993820.6134168109678004186.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Some of the commands have already been defined for the support of RAW
commands (to be blocked). Unlike their usage in the RAW interface, when
used through the supported interface, they will be coordinated and
marshalled along with other commands being issued by userspace and the
driver itself. That coordination will be added later.
The list of commands was determined based on the learnings from
libnvdimm and this list is provided directly from Dan.
Recommended-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210413140907.534404-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL.cache and CXL.mem registers begin after the CXL.io registers
which occupy the first 0x1000 bytes. The current code wasn't setting
this up properly for future users of the component registers. It was
correct for the probing code however.
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210611051113.224328-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The decoder count in the HDM decoder capability structure is an encoded
field. As defined in the spec:
Decoder Count: Reports the number of memory address decoders implemented
by the component.
0 – 1 Decoder
1 – 2 Decoders
2 – 4 Decoders
3 – 6 Decoders
4 – 8 Decoders
5 – 10 Decoders
All other values are reserved
Nothing is actually fixed by this as nothing actually used this mapping
yet.
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210611190111.121295-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A cxl_decoder is a child of a cxl_port. It represents a hardware decoder
configuration of an upstream port to one or more of its downstream
ports. The decoder is either represented in CXL standard HDM decoder
registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability
Structure), or it is a static decode configuration communicated by
platform firmware (see the CXL Early Discovery Table: Fixed Memory
Window Structure).
The firmware described and hardware described decoders differ slightly
leading to 2 different sub-types of decoders, cxl_decoder_root and
cxl_decoder_switch. At the root level the decode capabilities restrict
what can be mapped beneath them. Mid-level switch decoders are
configured for either acclerator (type-2) or memory-expander (type-3)
operation, but they are otherwise agnostic to the type of memory
(volatile vs persistent) being mapped.
Here is an example topology from a single-ported host-bridge environment
without CFMWS decodes enumerated.
/sys/bus/cxl/devices/root0
├── devtype
├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00
├── port1
│ ├── decoder1.0
│ │ ├── devtype
│ │ ├── locked
│ │ ├── size
│ │ ├── start
│ │ ├── subsystem -> ../../../../../../bus/cxl
│ │ ├── target_list
│ │ ├── target_type
│ │ └── uevent
│ ├── devtype
│ ├── dport0 -> ../../../../pci0000:34/0000:34:00.0
│ ├── subsystem -> ../../../../../bus/cxl
│ ├── uevent
│ └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00
├── subsystem -> ../../../../bus/cxl
├── uevent
└── uport -> ../../ACPI0017:00
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While the resources enumerated by the CEDT.CFMWS identify a cxl_port
with host bridges as downstream ports, host bridges themselves are
upstream ports that decode to downstream ports represented by PCIe Root
Ports. Walk the PCIe Root Ports connected to a CXL Host Bridge,
identified by the ACPI0016 _HID, and add each one as a cxl_dport of the
host bridge cxl_port.
For now, component registers are not enumerated, only the first order
uport / dport relationships.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325451145.2293126.10149150938788969381.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for infrastructure that enumerates and configures the CXL
decode mechanism of an upstream port to its downstream ports, add a
representation of a CXL downstream port.
On ACPI systems the top-most logical downstream ports in the hierarchy
are the host bridges (ACPI0016 devices) that decode the memory windows
described by the CXL Early Discovery Table Fixed Memory Window
Structures (CEDT.CFMWS).
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/162325450624.2293126.3533006409920271718.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CONFIG_CXL_BUS is default 'n' as expected for new functionality. When
that is enabled do not make the end user hunt for all the expected
sub-options to enable. For example CONFIG_CXL_BUS without CONFIG_CXL_MEM
is an odd/expert configuration, so is CONFIG_CXL_MEM without
CONFIG_CXL_ACPI (on ACPI capable platforms). Default CONFIG_CXL_MEM and
CONFIG_CXL_ACPI to CONFIG_CXL_BUS.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325450105.2293126.17046356425194082921.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While CXL builds upon the PCI software model for enumeration and
endpoint control, a static platform component is required to bootstrap
the CXL memory layout. Similar to how ACPI identifies root-level PCI
memory resources, ACPI data enumerates the address space and interleave
configuration for CXL Memory.
In addition to identifying host bridges, ACPI is responsible for
enumerating the CXL memory space that can be addressed by downstream
decoders. This is similar to the requirement for ACPI to publish
resources via the _CRS method for PCI host bridges. Specifically, ACPI
publishes a table, CXL Early Discovery Table (CEDT), which includes a
list of CXL Memory resources, CXL Fixed Memory Window Structures
(CFMWS).
For now, introduce the core infrastructure for a cxl_port hierarchy
starting with a root level anchor represented by the ACPI0017 device.
Follow on changes model support for the configurable decode capabilities
of cxl_port instances, i.e. CXL switch support.
Co-developed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The expectation is that devm functions take 'struct device *' and pci
functions take 'struct pci_dev *'. Swap out the @pdev argument for @dev
and fixup related helpers.
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162216592374.3833641.13281743585064451514.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
An HDM decoder is defined in the CXL 2.0 specification as a mechanism
that allow devices and upstream ports to claim memory address ranges and
participate in interleave sets. HDM decoder registers are within the
component register block defined in CXL 2.0 8.2.3 CXL 2.0 Component
Registers as part of the CXL.cache and CXL.mem subregion.
The Component Register Block is found via the Register Locator DVSEC
in a similar fashion to how the CXL Device Register Block is found. The
primary difference is the capability id size of the Component Register
Block is a single DWORD instead of 4 DWORDS.
It's now possible to configure a CXL type 3 device's HDM decoder. Such
programming is expected for CXL devices with persistent memory, and hot
plugged CXL devices that participate in CXL.mem with volatile memory.
Add probe and mapping functions for the component register blocks.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Co-developed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-6-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Some hardware implementations mix component and device registers into
the same BAR and the driver stack is going to need independent mapping
implementations for those 2 cases. Furthermore, it will be nice to have
finer grained mappings should user space want to map some register
blocks.
Now that individual register blocks are mapped; those blocks regions
should be reserved individually to fully separate the register blocks.
Release the 'global' memory reservation and create individual register
block region reservations through devm.
NOTE: pci_release_mem_regions() is still compatible with
pcim_enable_device() because it removes the automatic region release
when called. So preserve the pcim_enable_device() so that the pcim
interface can be called if needed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210604005316.4187340-1-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The information required to map registers based on capabilities is
contained within the bars themselves. This means the bar must be mapped
to read the information needed and then unmapped to map the individual
parts of the BAR based on capabilities.
Change cxl_setup_device_regs() to return a new cxl_register_map, change
the name to cxl_probe_device_regs(). Allocate and place
cxl_register_maps on a list while processing all of the specified
register blocks.
After probing all the register blocks go back and map smaller registers
blocks based on their capabilities and dispose of the cxl_register_maps.
NOTE: pci_iomap() is not managed automatically via pcim_enable_device()
so be careful to call pci_iounmap() correctly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210604005036.4187184-1-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In order to remap individual register sets each bar region must be
reserved prior to mapping. Because the details of individual register
sets are contained within the BARs themselves, the bar must be mapped 2
times, once to extract this information and a second time for each
register set.
Rather than attempt to reserve each BAR individually and track if that
bar has been reserved. Open code pcim_iomap_regions() by first
reserving all memory regions on the device and then mapping the bars
individually as needed.
NOTE pci_request_mem_regions() does not need a corresponding
pci_release_mem_regions() because the pci device is managed via
pcim_enable_device().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Each register block located in the DVSEC needs to be decoded from 2
words, 'register offset high' and 'register offset low'.
Create a function, cxl_decode_register_block() to perform this decode
and return the bar, offset, and register type of the register block.
Then use the values decoded in cxl_mem_map_regblock() instead of passing
the raw registers.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210528004922.3980613-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
@cxlm.base only existed to support holding the base found in the
register block mapping code, and pass it along to the register setup
code. Now that the register setup function has all logic around managing
the registers, from DVSEC to iomapping up to populating our CXL specific
information, it is easy to turn the @base values into local variables
and remove them from our device driver state.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210520212953.1181695-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Start moving code around to ultimately get rid of @cxlm.base. The
@cxlm.base member serves no purpose other than intermediate storage of
the offset found in cxl_mem_map_regblock() later used by
cxl_mem_setup_regs(). Aside from wanting to get rid of this useless
member, it will help later when adding new register block identifiers.
While @cxlm.base still exists, it will become trivial to remove it in a
future patch.
No functional change is meant to be introduced in this patch.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210407222625.320177-4-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a new function specifically for mapping the register blocks and
offsets within. The new function can be used more generically for other
register block identifiers.
No functional change is meant to be introduced in this patch with the
exception of a dev_err printed when the device register block isn't
found.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210407222625.320177-3-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Trivial cleanup.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210407222625.320177-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Vendor capabilities occupy 0x8000 to 0xFFFF according to CXL 2.0 spec
8.2.8.2.1 CXL Device Capabilities. While they are not defined by the
spec, they are allowed and not "unknown". Call this detail out in the
logs to let users easily distinguish the difference.
This patch is a squash of two earlier patches and take in some minor
suggestions from both Vishal and Dan.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20210520204852.1070780-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The 'Identify Device' mailbox command returns an 'lsa_size', which is
the size of the label storage area on the device. Export it as a sysfs
attribute so that userspace tooling to read/write the LSA can determine
the size without having to run an 'Identify Device' on their own.
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210520194745.1095517-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
As the driver has undergone development, it's become clear that the
majority [entirety?] of the current functionality in mem.c is actually a
layer encapsulating functionality exposed through PCI based
interactions. This layer can be used either in isolation or to provide
functionality for higher level functionality.
CXL capabilities exist in a parallel domain to PCIe. CXL devices are
enumerable and controllable via "legacy" PCIe mechanisms; however, their
CXL capabilities are a superset of PCIe. For example, a CXL device may
be connected to a non-CXL capable PCIe root port, and therefore will not
be able to participate in CXL.mem or CXL.cache operations, but can still
be accessed through PCIe mechanisms for CXL.io operations.
To properly represent the PCI nature of this driver, and in preparation for
introducing a new driver for the CXL.mem / HDM decoder (Host-managed Device
Memory) capabilities of a CXL memory expander, rename mem.c to pci.c so that
mem.c is available for this new driver.
The result of the change is that there is a clear layering distinction
in the driver, and a systems administrator may load only the cxl_pci
module and gain access to such operations as, firmware update, offline
provisioning of devices, and error collection. In addition to freeing up
the file name for another purpose, there are two primary reasons this is
useful,
1. Acting upon devices which don't have full CXL capabilities. This
may happen for instance if the CXL device is connected in a CXL
unaware part of the platform topology.
2. Userspace-first provisioning for devices without kernel driver
interference. This may be useful when provisioning a new device
in a specific manner that might otherwise be blocked or prevented
by the real CXL mem driver.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210526174413.802913-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While CXL Memory Device endpoints locate the CXL MMIO registers in a PCI
BAR, CXL root bridges have their MMIO base address described by platform
firmware. Refactor the existing register lookup into a generic facility
for endpoints and bridges to share.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972534.1865304.3218686216153688039.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for more generic shared functionality across endpoint
consumers of core cxl resources, and platform-firmware producers of
those resources, rename bus.c to core.c. In addition to the central
rendezvous for interleave coordination, the core will also define common
routines like CXL register block mapping.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096972018.1865304.11079951161445408423.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL MMIO register blocks are organized by device type and capabilities.
There are Component registers, Device registers (yes, an ambiguous
name), and Memory Device registers (a specific extension of Device
registers).
It is possible for a given device instance (endpoint or port) to
implement register sets from multiple of the above categories.
The driver code that enumerates and maps the registers is type specific
so it is useful to have a dedicated type and helpers for each block
type.
At the same time, once the registers are mapped the origin type does not
matter. It is overly pedantic to reference the register block type in
code that is using the registers.
In preparation for the endpoint driver to incorporate Component registers
into its MMIO operations reorganize the registers to allow typed
enumeration + mapping, but anonymous usage. With the end state of
'struct cxl_regs' to be:
struct cxl_regs {
union {
struct {
CXL_DEVICE_REGS();
};
struct cxl_device_regs device_regs;
};
union {
struct {
CXL_COMPONENT_REGS();
};
struct cxl_component_regs component_regs;
};
};
With this arrangement the driver can share component init code with
ports, but when using the registers it can directly reference the
component register block type by name without the 'component_regs'
prefix.
So, map + enumerate can be shared across drivers of different CXL
classes e.g.:
void cxl_setup_device_regs(struct device *dev, void __iomem *base,
struct cxl_device_regs *regs);
void cxl_setup_component_regs(struct device *dev, void __iomem *base,
struct cxl_component_regs *regs);
...while inline usage in the driver need not indicate where the
registers came from:
readl(cxlm->regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.hdm + HDM_OFFSET);
...instead of:
readl(cxlm->regs.device_regs.mbox + MBOX_OFFSET);
readl(cxlm->regs.component_regs.hdm + HDM_OFFSET);
This complexity of the definition in .h yields improvement in code
readability in .c while maintaining type-safety for organization of
setup code. It prepares the implementation to maintain organization in
the face of CXL devices that compose register interfaces consisting of
multiple types.
Given that this new container is named 'regs' rename the common register
base pointer @base, and fixup the kernel-doc for the missing @cxlmd
description.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/162096971451.1865304.13540251513463515153.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for sharing cxl.h with other generic CXL consumers,
move / consolidate some of the memory device specifics to mem.h.
The motivation for moving out of cxl.h is to maintain least privilege
access to memory-device details since cxl.h is used in multiple files.
The motivation for moving definitions into a new mem.h header is for
code readability and organization. I.e. minimize implementation details
when reading data structures and other definitions.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162096970932.1865304.14510894426562947262.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL Identify Memory Device output payload emits capacity in 256MB
units. The driver is treating the capacity field as bytes. This was
missed because QEMU reports bytes when it should report bytes / 256MB.
Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The "Register Offset Low" register of a "DVSEC Register Locator"
contains the 64K aligned offset for the registers along with the BAR
indicator and an id. The implementation was treating the "Register Block
Offset Low" field a value rather than as a pre-aligned component of the
64-bit offset. So, just mask, don't mask and shift (FIELD_GET).
The user visible result of this bug is that the driver fails to bind to
the device after none of the required blocks are found.
This was missed earlier because the primary development done in the QEMU
environment only uses 0 offsets, i.e. 0 shifted is still 0.
Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Typically the mem_commands[] array is in sync with 'enum { CXL_CMDS }'.
Current code works well.
However, the array size of mem_commands[] may not strictly be the same
as CXL_MEM_COMMAND_ID_MAX. E.g. if a new CXL_CMD() is added that is
guarded by #ifdefs, the array could be shorter. This could lead then
further to an out-of-bounds array access in cxl_validate_cmd_from_user().
Fix this by forcing the array size to CXL_MEM_COMMAND_ID_MAX. This
also adds range checks for array items in mem_commands[] at compile
time.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210324141635.22335-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There is no power management of cxl virtual devices, disable
device-power-management and runtime-power-management to prevent
userspace from growing expectations of those attributes appearing. They
can be added back in the future if needed.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161728761025.2474381.808344500111924819.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While device_add() will happen to catch dev_set_name() failures it is a
broken pattern to follow given that the core may try to fall back to a
different name.
Add explicit checking for dev_set_name() failures to be cleaned up by
put_device(). Skip cdev_device_add() and proceed directly to
put_device() if the name set fails.
This type of bug is easier to see if 'alloc' is split from 'add'
operations that require put_device() on failure. So cxl_memdev_alloc()
is split out as a result.
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728760514.2474381.1163928273337158134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The percpu_ref to gate whether cxl_memdev_ioctl() is free to use the
driver context (@cxlm) to issue I/O is overkill, implemented incorrectly
(missing a device reference before accessing the percpu_ref), and the
complexities of shutting down a percpu_ref contributed to a bug in the
error unwind in cxl_mem_add_memdev() (missing put_device() to be fixed
separately).
Use an rwsem to explicitly synchronize the usage of cxlmd->cxlm, and add
the missing reference counting for cxlmd in cxl_memdev_open() and
cxl_memdev_release_file().
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728759948.2474381.17481500816783671817.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While none the CXL sysfs attributes are threatening to overrun a
PAGE_SIZE of output, it is good form to use the recommended helpers.
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728759424.2474381.11231441014951343463.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When submitting a command for userspace, input and output payload bounce
buffers are allocated. For a given command, both input and output
buffers may exist and so when allocation of the input buffer fails, the
output buffer must be freed too.
As far as I can tell, userspace can't easily exploit the leak to OOM a
machine unless the machine was already near OOM state.
Fixes: 583fa5e71cae ("cxl/mem: Add basic IOCTL interface")
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: https://lore.kernel.org/r/20210221035846.680145-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Fixes: b754ffbbc0ee ("cxl/mem: Add basic IOCTL interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YC+K3kgzqm20zCWY@mwanda
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add initial set of formal commands beyond basic identify and command
enumeration.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2)
Link: https://lore.kernel.org/r/20210217040958.1354670-8-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL devices identified by the memory-device class code must implement
the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec).
While the driver already maintains a list of commands it supports, there
is still a need to be able to distinguish between commands that the
driver knows about from commands that are optionally supported by the
hardware.
The Command Effects Log (CEL) is specified in the CXL 2.0 specification.
The CEL is one of two types of logs, the other being vendor specific.
They are distinguished in hardware/spec via UUID. The CEL is useful for
2 things:
1. Determine which optional commands are supported by the CXL device.
2. Enumerate any vendor specific commands
The CEL is used by the driver to determine which commands are available
in the hardware and therefore which commands userspace is allowed to
execute. The set of enabled commands might be a subset of commands which
are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL.
With the CEL enabling comes a internal flag to indicate a base set of
commands that are enabled regardless of CEL. Such commands are required
for basic interaction with the hardware and thus can be useful in debug
cases, for example if the CEL is corrupted.
The implementation leaves the statically defined table of commands and
supplements it with a bitmap to determine commands that are enabled.
This organization was chosen for the following reasons:
- Smaller memory footprint. Doesn't need a table per device.
- Reduce memory allocation complexity.
- Fixed command IDs to opcode mapping for all devices makes development
and debugging easier.
- Certain helpers are easily achievable, like cxl_for_each_cmd().
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v3)
Link: https://lore.kernel.org/r/20210217040958.1354670-7-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL memory device send interface will have a number of supported
commands. The raw command is not such a command. Raw commands allow
userspace to send a specified opcode to the underlying hardware and
bypass all driver checks on the command. The primary use for this
command is to [begrudgingly] allow undocumented vendor specific hardware
commands.
While not the main motivation, it also allows prototyping new hardware
commands without a driver patch and rebuild.
While this all sounds very powerful it comes with a couple of caveats:
1. Bug reports using raw commands will not get the same level of
attention as bug reports using supported commands (via taint).
2. Supported commands will be rejected by the RAW command.
With this comes new debugfs knob to allow full access to your toes with
your weapon of choice.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ariel Sibley <Ariel.Sibley@microchip.com>
Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a straightforward IOCTL that provides a mechanism for userspace to
query the supported memory device commands. CXL commands as they appear
to userspace are described as part of the UAPI kerneldoc. The command
list returned via this IOCTL will contain the full set of commands that
the driver supports, however, some of those commands may not be
available for use by userspace.
Memory device commands first appear in the CXL 2.0 specification. They
are submitted through a mailbox mechanism specified in the CXL 2.0
specification.
The send command allows userspace to issue mailbox commands directly to
the hardware. The list of available commands to send are the output of
the query command. The driver verifies basic properties of the command
and possibly inspect the input (or output) payload to determine whether
or not the command is allowed (or might taint the kernel).
Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create the /sys/bus/cxl hierarchy to enumerate:
* Memory Devices (per-endpoint control devices)
* Memory Address Space Devices (platform address ranges with
interleaving, performance, and persistence attributes)
* Memory Regions (active provisioned memory from an address space device
that is in use as System RAM or delegated to libnvdimm as Persistent
Memory regions).
For now, only the per-endpoint control devices are registered on the
'cxl' bus. However, going forward it will provide a mechanism to
coordinate cross-device interleave.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2)
Link: https://lore.kernel.org/r/20210217040958.1354670-4-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Provide enough functionality to utilize the mailbox of a memory device.
The mailbox is used to interact with the firmware running on the memory
device. The flow is proven with one implemented command, "identify".
Because the class code has already told the driver this is a memory
device and the identify command is mandatory.
CXL devices contain an array of capabilities that describe the
interactions software can have with the device or firmware running on
the device. A CXL compliant device must implement the device status and
the mailbox capability. Additionally, a CXL compliant memory device must
implement the memory device capability. Each of the capabilities can
[will] provide an offset within the MMIO region for interacting with the
CXL device.
The capabilities tell the driver how to find and map the register space
for CXL Memory Devices. The registers are required to utilize the CXL
spec defined mailbox interface. The spec outlines two mailboxes, primary
and secondary. The secondary mailbox is earmarked for system firmware,
and not handled in this driver.
Primary mailboxes are capable of generating an interrupt when submitting
a background command. That implementation is saved for a later time.
Reported-by: Colin Ian King <colin.king@canonical.com> (coverity)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL.mem protocol allows a device to act as a provider of "System
RAM" and/or "Persistent Memory" that is fully coherent as if the memory
was attached to the typical CPU memory controller.
With the CXL-2.0 specification a PCI endpoint can implement a "Type-3"
device interface and give the operating system control over "Host
Managed Device Memory". See section 2.3 Type 3 CXL Device.
The memory range exported by the device may optionally be described by
the platform firmware memory map, or by infrastructure like LIBNVDIMM to
provision persistent memory capacity from one, or more, CXL.mem devices.
A pre-requisite for Linux-managed memory-capacity provisioning is this
cxl_mem driver that can speak the mailbox protocol defined in section
8.2.8.4 Mailbox Registers.
For now just land the initial driver boiler-plate and Documentation/
infrastructure.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: David Rientjes <rientjes@google.com> (v1)
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
