summaryrefslogtreecommitdiffstats
path: root/drivers/crypto
AgeCommit message (Collapse)AuthorFilesLines
2017-11-16Merge tag 'powerpc-4.15-1' of ↵Linus Torvalds2-97/+72
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A bit of a small release, I suspect in part due to me travelling for KS. But my backlog of patches to review is smaller than usual, so I think in part folks just didn't send as much this cycle. Non-highlights: - Five fixes for the >128T address space handling, both to fix bugs in our implementation and to bring the semantics exactly into line with x86. Highlights: - Support for a new OPAL call on bare metal machines which gives us a true NMI (ie. is not masked by MSR[EE]=0) for debugging etc. - Support for Power9 DD2 in the CXL driver. - Improvements to machine check handling so that uncorrectable errors can be reported into the generic memory_failure() machinery. - Some fixes and improvements for VPHN, which is used under PowerVM to notify the Linux partition of topology changes. - Plumbing to enable TM (transactional memory) without suspend on some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND). - Support for emulating vector loads form cache-inhibited memory, on some Power9 revisions. - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we believe it has never had any users. - A major rework of the API drivers use when initiating and waiting for long running operations performed by OPAL firmware, and changes to the powernv_flash driver to use the new API. - Several fixes for the handling of FP/VMX/VSX while processes are using transactional memory. - Optimisations of TLB range flushes when using the radix MMU on Power9. - Improvements to the VAS facility used to access coprocessors on Power9, and related improvements to the way the NX crypto driver handles requests. - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit. Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A. Kennington III" * tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits) powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature powerpc/64s: Fix masking of SRR1 bits on instruction fault powerpc/64s: mm_context.addr_limit is only used on hash powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary powerpc/64s/hash: Fix fork() with 512TB process address space powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Fix 512T hint detection to use >= 128T powerpc: Fix DABR match on hash based systems powerpc/signal: Properly handle return value from uprobe_deny_signal() powerpc/fadump: use kstrtoint to handle sysfs store powerpc/lib: Implement UACCESS_FLUSHCACHE API powerpc/lib: Implement PMEM API powerpc/powernv/npu: Don't explicitly flush nmmu tlb powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm() powerpc/powernv/idle: Round up latency and residency values powerpc/kprobes: refactor kprobe_lookup_name for safer string operations powerpc/kprobes: Blacklist emulate_update_regs() from kprobes powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace powerpc/kprobes: Disable preemption before invoking probe handler for optprobes ...
2017-11-14Merge branch 'linus' of ↵Linus Torvalds62-3760/+4635
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds3-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-12crypto/nx: Do not initialize workmem allocationHaren Myneni1-1/+1
We are using percpu send window on P9 NX (powerNV) instead of opening / closing per each crypto session. Means txwin is removed from workmem. So we do not need to initialize workmem for each request. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12crypto/nx: Use percpu send window for NX requestsHaren Myneni1-81/+68
For P9 NX, the send window is opened for each crypto session and closed upon free. But VAS supports 64K windows per chip for all coprocessors including in user space support. So there is a possibility of not getting the window for kernel requests. This patch reserves windows for each coprocessor type (NX842) and are available forever for kernel requests, Opens each window for each CPU on the corresponding chip during driver initialization. So then use the percpu txwin for NX requests depends on the CPU on which the process is executing. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-12powerpc/vas, nx-842: Define and use chip_to_vas_id()Sukadev Bhattiprolu1-15/+3
Define a helper, chip_to_vas_id() to map a given chip id to corresponding vas id. Normally, callers of vas_rx_win_open() and vas_tx_win_open() want the VAS window to be on the same chip where the calling thread is executing. These callers can pass in -1 for the VAS id. This interface will be useful if a thread running on one chip wants to open a window on another chip (like the NX-842 driver does during start up). Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-10crypto: stm32/hash - Fix return issue on updateLionel Debieve1-7/+1
When data append reached the threshold for processing, we must inform that processing is on going to wait before managing the next request. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10crypto: dh - Remove pointless checks for NULL 'p' and 'g'Eric Biggers1-3/+0
Neither 'p' nor 'g' can be NULL, as they were unpacked using crypto_dh_decode_key(). And it makes no sense for them to be optional. So remove the NULL checks that were copy-and-pasted into both modules. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10crypto: qat - Clean up error handling in qat_dh_set_secret()Eric Biggers1-7/+8
Update the error handling in qat_dh_set_secret() to mirror dh_set_secret(). The new version is less error-prone because freeing memory and setting the pointers to NULL is now only done in one place. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar51-0/+51
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06crypto: Convert timers to use timer_setup()Kees Cook3-9/+8
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jamie Iles <jamie@jamieiles.com> Cc: linux-arm-kernel@axis.com Cc: linux-crypto@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Lars Persson <lars.persson@axis.com> # for axis
2017-11-06crypto: chcr - Replace _manual_ swap with swap macroGustavo A. R. Silva1-4/+1
Make use of the swap macro and remove unnecessary variable temp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]Boris BREZILLON1-0/+1
struct platform_device_id should be NULL terminated to let the core detect where the last entry is. Fixes: 07c50a8be41a ("crypto: marvell - Add a platform_device_id table") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: atmel - remove empty functionsTudor-Dan Ambarus2-38/+0
Pointer members of an object with static storage duration, if not explicitly initialized, will be initialized to a NULL pointer. The crypto API checks if these pointers are not NULL before using them, therefore we can safely remove these empty functions. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: caam - remove unused param of ctx_map_to_sec4_sg()Horia Geantă1-4/+4
ctx_map_to_sec4_sg() function, added in commit 045e36780f115 ("crypto: caam - ahash hmac support") has never used the "desc" parameter, so let's drop it. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-06crypto: caam - remove unneeded edesc zeroizationHoria Geantă1-4/+0
Extended descriptor allocation has been changed by commit dde20ae9d6383 ("crypto: caam - Change kmalloc to kzalloc to avoid residual data") to provide zeroized memory, meaning we no longer have to sanitize its members - edesc->src_nents and edesc->dst_dma. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel-aes - Reset the controller before each useRomain Izard1-7/+3
When using the rfc4543(gcm(aes))) mode, the registers of the hardware engine are not empty after use. If the engine is not reset before its next use, the following results will be invalid. Always reset the hardware engine. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel-aes - properly set IV after {en,de}cryptRomain Izard1-3/+37
Certain cipher modes like CTS expect the IV (req->info) of ablkcipher_request (or equivalently req->iv of skcipher_request) to contain the last ciphertext block when the {en,de}crypt operation is done. Fix this issue for the Atmel AES hardware engine. The tcrypt test case for cts(cbc(aes)) is now correctly passed. In the case of in-place decryption, copy the ciphertext in an intermediate buffer before decryption. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: s5p-sss - Add HASH support for ExynosKamil Konieczny2-10/+1410
Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW. It uses the crypto framework asynchronous hash api. It is based on omap-sham.c driver. S5P has some HW differencies and is not implemented. Modifications in s5p-sss: - Add hash supporting structures and functions. - Modify irq handler to handle both aes and hash signals. - Resize resource end in probe if EXYNOS_HASH is enabled in Kconfig. - Add new copyright line and new author. - Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6 with crypto run-time self test testmgr and with tcrypt module with: modprobe tcrypt sec=1 mode=N where N=402, 403, 404 (MD5, SHA1, SHA256). Modifications in drivers/crypto/Kconfig: - Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG and CRYPTO_DEV_S5P - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH as they are needed for fallback. Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: s5p-sss - Change spaces to tabsKamil Konieczny1-95/+95
Change #define lines to use tabs consistently. Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: drivers - Convert timers to use timer_setup()Kees Cook2-7/+6
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jamie Iles <jamie@jamieiles.com> Cc: linux-arm-kernel@axis.com Cc: linux-crypto@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: caam/qi - abort algorithm setup on DPAA2 partsHoria Geantă1-1/+6
caam/qi frontend (i.e. caamalg_qi) mustn't be used in case it runs on a DPAA2 part (this could happen when using a multiplatform kernel). Fixes: 297b9cebd2fc ("crypto: caam/jr - add support for DPAA2 parts") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: caam - fix incorrect defineRadu Alexe1-1/+1
Fixes: 3ebfa92f49a6 ("crypto: caam - Add new macros for building extended SEC descriptors (> 64 words)") Signed-off-by: Radu Alexe <radu.alexe@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel - remove useless irq initTudor-Dan Ambarus3-6/+0
irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel - return appropriate error codeTudor-Dan Ambarus3-6/+3
Return -ENODEV when dma_request_slave_channel_compat() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: mediatek - move to generic async completionGilad Ben-Yossef1-26/+5
The mediatek driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qce - move to generic async completionGilad Ben-Yossef1-26/+4
The qce driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: talitos - move to generic async completionGilad Ben-Yossef1-33/+5
The talitos driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell/cesa - remove redundant backlog checks on EBUSYGilad Ben-Yossef2-3/+2
Now that -EBUSY return code only indicates backlog queueing we can safely remove the now redundant check for the CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: ccp - use -ENOSPC for transient busy indicationGilad Ben-Yossef2-7/+8
Replace -EBUSY with -ENOSPC when reporting transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: vmx - Use skcipher for ctr fallbackPaulo Flabiano Smorigo1-16/+17
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Switch cipher algs to the skcipher interfaceBoris BREZILLON3-260/+251
crypto_alg is not supposed to be directly implemented by crypto engine driver. Drivers should instead implement specialized interfaces like ahash_alg or skcipher_alg. Migrate to all cipher algorithms to the skcipher_alg interface. While at it, get rid of all references to ablkcipher including in internal struct or function names. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qat - mark expected switch fall-throughs in qat_ucloGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qat - remove unused and redundant pointer vf_infoColin Ian King1-3/+0
The pointer vf_info is being assigned but never read, it is redundant and therefore can be removed. Cleans up clang warning: Value stored to 'vf_info' is never read Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: ccp - remove unused variable qimColin Ian King1-2/+1
Variable qim is assigned but never read, it is redundant and can be removed. Cleans up clang warning: Value stored to 'qim' is never read Fixes: 4b394a232df7 ("crypto: ccp - Let a v5 CCP provide the same function as v3") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: cavium - clean up clang warning on unread variable offsetColin Ian King1-1/+1
The variable offset is being assigned and not being used; it should be passed as the 2nd argument to call to function nitrox_write_csr but has been omitted. Fix this. Cleans up clang warning: Value stored to 'offset' is never read Fixes: 14fa93cdcd9b ("crypto: cavium - Add support for CNN55XX adapters.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Remove the old mv_cesa driverBoris BREZILLON5-1390/+3
All defconfigs selecting the old driver have been patched to select the new one instead. We can now remove the old driver along with the allhwsupports module parameter in the new driver that was used to check whether the new driver was allowed to take control of the CESA engine or not. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Add a platform_device_id tableBoris BREZILLON1-0/+6
Add a platform_device_id table to allow using this driver on orion platforms that have not been converted to DT. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Fix memory leakHarsh Jain1-4/+4
Fix memory leak when device does not support crypto. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driverHarsh Jain3-694/+1109
Allow chcr to do DMA mapping/Unmapping instead of lld cxgb4. It moves "Copy AAD to dst buffer" requirement from driver to firmware. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Remove allocation of sg list to implement 2K limit of dsgl ↵Harsh Jain4-172/+76
header Update DMA address index instead of allocating new sg list to impose 2k size limit for each entry. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Use x8_ble gf multiplication to calculate IV.Harsh Jain2-2/+10
gf128mul_x8_ble() will reduce gf Multiplication iteration by 8. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Check error code with IS_ERR macroYeshaswi M R Gowda1-8/+8
Check and return proper error code. Signed-off-by: Jitendra Lulla <jlulla@chelsio.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: chelsio - Remove unused parameterYeshaswi M R Gowda2-32/+23
Remove unused parameter sent to latest fw. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman51-0/+51
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2-3/+3
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-12crypto: talitos - avoid useless copyLEROY Christophe1-14/+22
This patch avoids copy of buffered data to hash from bufnext to buf Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: talitos - chain in buffered data for ahash on SEC1LEROY Christophe2-13/+127
SEC1 doesn't support S/G in descriptors so for hash operations, the CPU has to build a buffer containing the buffered block and the incoming data. This generates a lot of memory copies which represents more than 50% of CPU time of a md5sum operation as shown below with a 'perf record'. |--86.24%-- kcapi_md_digest | | | |--86.18%-- _kcapi_common_vmsplice_chunk_fd | | | | | |--83.68%-- splice | | | | | | | |--83.59%-- ret_from_syscall | | | | | | | | | |--83.52%-- sys_splice | | | | | | | | | | | |--83.49%-- splice_from_pipe | | | | | | | | | | | | | |--83.04%-- __splice_from_pipe | | | | | | | | | | | | | | | |--80.67%-- pipe_to_sendpage | | | | | | | | | | | | | | | | | |--78.25%-- hash_sendpage | | | | | | | | | | | | | | | | | | | |--60.08%-- ahash_process_req | | | | | | | | | | | | | | | | | | | | | |--56.36%-- sg_copy_buffer | | | | | | | | | | | | | | | | | | | | | | | |--55.29%-- memcpy | | | | | | | | | | | | However, unlike SEC2+, SEC1 offers the possibility to chain descriptors. It is therefore possible to build a first descriptor pointing to the buffered data and a second descriptor pointing to the incoming data, hence avoiding the memory copy to a single buffer. With this patch, the time necessary for a md5sum on a 90Mbytes file is approximately 3 seconds. Without the patch it takes 6 seconds. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: talitos - do hw_context DMA mapping outside the requestsLEROY Christophe1-23/+57
At every request, we map and unmap the same hash hw_context. This patch moves the dma mapping/unmapping in functions ahash_init() and ahash_import(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-12crypto: talitos - DMA map key in setkey()LEROY Christophe1-17/+39
dma_map_single() is an heavy operation which doesn't need to be done at each request as the key doesn't change. Instead of DMA mapping the key at every request, this patch maps it once in setkey() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 16:36:26 +0000