summaryrefslogtreecommitdiffstats
path: root/drivers/crypto
AgeCommit message (Collapse)AuthorFilesLines
2008-09-14crypto: talitos - Avoid consecutive packets going out with same IVKim Phillips1-2/+4
The SEC's h/w IV out implementation DMAs the trailing encrypted payload block of the last encryption to ctx->iv. Since the last encryption may still be pending completion, we can sufficiently prevent successive packets from being transmitted with the same IV by xoring with sequence number. Also initialize alg_list earlier to prevent oopsing on a failed probe. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore()Suresh Siddha2-1/+36
Wolfgang Walter reported this oops on his via C3 using padlock for AES-encryption: ################################################################## BUG: unable to handle kernel NULL pointer dereference at 000001f0 IP: [<c01028c5>] __switch_to+0x30/0x117 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: Pid: 2071, comm: sleep Not tainted (2.6.26 #11) EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0 EIP is at __switch_to+0x30/0x117 EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300 ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000) Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046 c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000 c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0 Call Trace: [<c03b5b43>] ? schedule+0x285/0x2ff [<c0131856>] ? pm_qos_requirement+0x3c/0x53 [<c0239f54>] ? acpi_processor_idle+0x0/0x434 [<c01025fe>] ? cpu_idle+0x73/0x7f [<c03a4dcd>] ? rest_init+0x61/0x63 ======================= Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end() around the padlock instructions fix the oops. Suresh wrote: These padlock instructions though don't use/touch SSE registers, but it behaves similar to other SSE instructions. For example, it might cause DNA faults when cr0.ts is set. While this is a spurious DNA trap, it might cause oops with the recent fpu code changes. This is the code sequence that is probably causing this problem: a) new app is getting exec'd and it is somewhere in between start_thread() and flush_old_exec() in the load_xyz_binary() b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is cleared. c) Now we get an interrupt/softirq which starts using these encrypt/decrypt routines in the network stack. This generates a math fault (as cr0.ts is '1') which sets TS_USEDFPU and restores the math that is in the task's xstate. d) Return to exec code path, which does start_thread() which does free_thread_xstate() and sets xstate pointer to NULL while the TS_USEDFPU is still set. e) At the next context switch from the new exec'd task to another task, we have a scenarios where TS_USEDFPU is set but xstate pointer is null. This can cause an oops during unlazy_fpu() in __switch_to() Now: 1) This should happen with or with out pre-emption. Viro also encountered similar problem with out CONFIG_PREEMPT. 2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because kernel_fpu_begin() will manually do a clts() and won't run in to the situation of setting TS_USEDFPU in step "c" above. 3) This was working before the fpu changes, because its a spurious math fault which doesn't corrupt any fpu/sse registers and the task's math state was always in an allocated state. With out the recent lazy fpu allocation changes, while we don't see oops, there is a possible race still present in older kernels(for example, while kernel is using kernel_fpu_begin() in some optimized clear/copy page and an interrupt/softirq happens which uses these padlock instructions generating DNA fault). This is the failing scenario that existed even before the lazy fpu allocation changes: 0. CPU's TS flag is set 1. kernel using FPU in some optimized copy routine and while doing kernel_fpu_begin() takes an interrupt just before doing clts() 2. Takes an interrupt and ipsec uses padlock instruction. And we take a DNA fault as TS flag is still set. 3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts 4. We complete the padlock routine 5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes the optimized copy routine and does kernel_fpu_end(). At this point, we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll set and not cleared. 6. Now kernel resumes its user operation. And at the next context switch, kernel sees it has do a FP save as TS_USEDFPU is still set and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu() will take a DNA fault, as cr0.ts is '1' and now, because we are in __switch_to(), math_state_restore() will get confused and will restore the next task's FP state and will save it in prev tasks's FP state. Remember, in __switch_to() we are already on the stack of the next task but take a DNA fault for the prev task. This causes the fpu leakage. Fix the padlock instruction usage by calling them inside the context of new routines irq_ts_save/restore(), which clear/restore cr0.ts manually in the interrupt context. This will not generate spurious DNA in the context of the interrupt which will fix the oops encountered and the possible FPU leakage issue. Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: talitos - Add handling for SEC 3.x treatment of link tableLee Nipper1-15/+39
Later SEC revision requires the link table (used for scatter/gather) to have an extra entry to account for the total length in descriptor [4], which contains cipher Input and ICV. This only applies to decrypt, not encrypt. Without this change, on 837x, a gather return/length error results when a decryption uses a link table to gather the fragments. This is observed by doing a ping with size of 1447 or larger with AES, or a ping with size 1455 or larger with 3des. So, add check for SEC compatible "fsl,3.0" for using extra link table entry. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-2/+2
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-17crypto: talitos - sparse fixKim Phillips1-1/+1
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Stop leaking memory in error pathKim Phillips1-2/+7
free edescriptor when returning error (such as -EAGAIN). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Fix GFP flag usageKim Phillips1-2/+4
use GFP_ATOMIC when necessary; use atomic_t when allocating submit_count. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Preempt overflow interruptsKim Phillips1-5/+22
add requests pending/submit count to prevent request queue full condition by preempting h/w overflow interrupts in software. We do this due to the delay in the delivery and handling of the channel overflow error interrupt. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Correct dst != src case handlingLee Nipper1-1/+1
Seems that dst == src, but this fixes the logic in case it's not. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Remove calls to of_node_putLee Nipper1-5/+0
Remove of_node_put calls since there is no corresponding of_node_get. This patch prevents an exception when talitos is loaded a 2nd time. This sequence: modprobe talitos; rmmod talitos; modprobe talitos causes this message: "WARNING: Bad of_node_put() on /soc8349@e0000000/crypto@30000". Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-13crypto: ixp4xx - Select CRYPTO_AUTHENCImre Kaloz1-0/+1
Without CRYPTO_AUTHENC the driver fails to build: drivers/built-in.o: In function `ixp_module_init': ixp4xx_crypto.c:(.init.text+0x3250): undefined reference to `crypto_aead_type' Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for sha256 and md5 variantsLee Nipper1-12/+99
This patch adds support for: authenc(hmac(sha256),cbc(aes)), authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(md5),cbc(aes)), authenc(hmac(md5),cbc(des3_ede)). Some constant usage was changed to use aes, des, and sha include files. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Use proper form for algorithm driver namesHerbert Xu1-2/+2
The name authenc(hmac(sha1-talitos),cbc(aes-talitos)) is potentially ambiguous since it could also mean using the generic authenc template on hmac(sha1-talitos) and cbc(aes-talitos). In general, parentheses should be reserved for templates that spawn algorithms. This patches changes it to the form authenc-hmac-sha1-cbc-aes-talitos. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for 3desLee Nipper2-27/+69
This patch adds support for authenc(hmac(sha1),cbc(des3_ede)) to the talitos crypto driver for the Freescale Security Engine. Some adjustments were made to the scatterlist to link table conversion to make 3des work for ping -s 1439..1446. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: padlock - Make module loading quieter when hardware isn't availableJeremy Katz2-4/+4
When loading aes or sha256 via the module aliases, the padlock modules also try to get loaded. Make the error message for them not being present only be a NOTICE rather than an ERROR so that use of 'quiet' will suppress the messages Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: ixp4xx - Hardware crypto support for IXP4xx CPUsChristian Hohnstaedt3-0/+1516
Add support for the hardware crypto engine provided by the NPE C of the Intel IXP4xx networking processor series. Supported ciphers: des, des3, aes and a combination of them with md5 and sha1 hmac Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Freescale integrated security engine (SEC) driverKim Phillips4-0/+1684
Add support for the SEC available on a wide range of PowerQUICC devices, e.g. MPC8349E, MPC8548E. This initial version supports authenc(hmac(sha1),cbc(aes)) for use with IPsec. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Simplify code using ARRAY_SIZE() macroRobert P. J. Day1-1/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Remove duplicated includeHuang Weiyi1-1/+0
Removed duplicated include file <linux/interrupt.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Have HW invalidate src and dest descriptors after processingPatrick McHardy1-4/+4
The descriptors need to be invalidated after processing for ring cleanup to work properly and to avoid using an old destination descriptor when the src and cmd descriptors are already set up and the dst descriptor isn't. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Move command descriptor setup to seperate functionPatrick McHardy1-101/+104
Move command descriptor setup to seperate function as preparation for the following DMA setup fixes. Note 1: also fix a harmless typo while moving it: sa_idx is initialized to dma->resi instead of dma->cmdi. Note 2: errors from command descriptor setup are not propagated back, anymore, they can't be handled anyway and all conditions leading to errors should be checked earlier. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix max queue length valuePatrick McHardy1-1/+1
All but the last element of the command and result descriptor rings can be used for crypto requests, fix HIFN_QUEUE_LENGTH. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly initialize ivsize for CBC modesPatrick McHardy1-0/+3
For combined modes like cbc(aes) the driver is responsible for initializing ivsize. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Use unique driver names for different algosPatrick McHardy1-13/+14
When the CryptoAPI instantiates a new algorithm, it performs a lookup by driver name. Since hifn uses the same name for all modes of one algorithm, the lookup may return an incorrect algorithm. Change the name to use <mode>-<algo>-<devicename> to provide unique names for the different combinations and devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly handle requests for less than the full scatterlistPatrick McHardy1-10/+10
The scatterlist may contain more data than the crypto request, causing an underflow of the remaining byte count while walking the list. Use the minimum of the scatterlist element size and the remaining byte count specified in the crypto request to avoid this. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix data alignment checksPatrick McHardy1-28/+14
The check for misalignment of the scatterlist data has two bugs: - the source buffer doesn't need to be aligned at all - the destination buffer and its size needs to be aligned to a multiple of 4, not to the crypto alg blocksize Introduce symbolic constant for destination buffer alignment requirements, use it instead of the crypto alg blocksize and remove the unnecessary checks for source buffer alignment and change cra_alignmask to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Handle ablkcipher_walk errorsPatrick McHardy1-1/+4
ablkcipher_walk may return a negative error value, handle this properly instead of treating it as a huge number of scatter-gather elements. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Indicate asynchronous processing to crypto APIPatrick McHardy1-2/+2
hifn_setup_crypto() needs to return -EINPROGRESS on success to indicate asynchronous processing to the crypto API. This also means it must not return the errno code returned by hifn_process_queue(), if any. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Remove printk_ratelimit() for debugging printkPatrick McHardy1-1/+1
Without debugging this spams the log with "printk: N messages surpressed" without any actual messages on error. With debugging its more useful to always see the message. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Endianess fixesPatrick McHardy1-30/+30
HIFN uses little-endian by default, move cpu_to_le32 conversion to hifn_write_0/ hifn_write_1, add sparse annotations and fix an invalid endian conversion in hifn_setup_src_desc. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] padlock-aes: Use generic setkey functionSebastian Siewior2-301/+20
The Padlock AES setkey routine is the same as exported by the generic implementation. So we could use it. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Cc: Michal Ludvig <michal@logix.cz> Tested-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] sha384: Hardware acceleration for s390Jan Glauber1-2/+4
Exploit the System z10 hardware acceleration for SHA384. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] sha512: Hardware acceleration for s390Jan Glauber1-0/+11
Exploit the System z10 hardware acceleration for SHA512. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-17[S390] zcrypt: add support for large random numbersRalph Wuerthner1-0/+1
This patch allows user space applications to access large amounts of truly random data. The random data source is the build-in hardware random number generator on the CEX2C cards. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-03-30drivers/crypto/hifn_795x.c trivial endianness annotationsAl Viro1-14/+14
NB: remaining endianness warnings in the file are, AFAICS, real bugs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-15[HIFN]: Fix invalid config ifdefs for RNG supportPatrick McHardy1-3/+3
The CRYPTO_DEV_HIFN_795X_RNG ifdefs are missing the CONFIG_ prefix. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-26[S390] crypto: move s390 Kconfig options.Jan Glauber1-2/+61
Move s390 crypto Kconfig options to drivers/crypto/Kconfig to have all hardware crypto devices in one place. This also makes messing up the kernel source tree easier for some people. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is mHerbert Xu2-4/+10
Currently it is possible to select HW_RANDOM as a module and have hifn795x built-in. This causes a build problem because hifn795x will then call hwrng_register which isn't built-in. This patch introduces a new config option to control the hifn795x RNG which lets us avoid this problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds6-98/+3118
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
2008-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy
2008-01-11[CRYPTO] hifn_795x: Fixup container_of() usageAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] padlock: Only reset the key once for each CBC and ECB operationHerbert Xu1-5/+15
Currently we reset the key for each segment fed to the xcrypt instructions. This patch optimises this for CBC and ECB so that we only do this once for each encrypt/decrypt operation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] blkcipher: Merge ablkcipher and blkcipher into one option/moduleHerbert Xu1-1/+1
With the impending addition of the givcipher type, both blkcipher and ablkcipher algorithms will use it to create givcipher objects. As such it no longer makes sense to split the system between ablkcipher and blkcipher. In particular, both ablkcipher.c and blkcipher.c would need to use the givcipher type which has to reside in ablkcipher.c since it shares much code with it. This patch merges the two Kconfig options as well as the modules into one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: Add __dev{init,exit} annotationsAdrian Bunk1-2/+2
This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: Use correct encrypt/decrypt function in fallbackSebastian Siewior1-2/+2
crypto_blkcipher_decrypt is wrong because it does not care about the IV. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: do not copy the IV too oftenSebastian Siewior2-5/+3
There is no reason to keep the IV in the private structre. Instead keep just a pointer to make the patch smaller :) This also remove a few memcpy()s Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[HIFN]: Add support for using the random number generatorPatrick McHardy1-1/+81
Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[HIFN]: Improve PLL initializationPatrick McHardy1-2/+108
The current PLL initalization has a number of deficiencies: - uses fixed multiplier of 8, which overclocks the chip when using a reference clock that operates at frequencies above 33MHz. According to a comment in the BSD source, this is true for the external clock on almost all every board. - writes to a reserved bit - doesn't follow the initialization procedure specified in chapter 6.11.1 of the HIFN hardware users guide - doesn't allow to use the PCI clock This patch adds a module parameter to specify the reference clock (pci or external) and its frequency and uses that to calculate the optimum multiplier to reach the maximal speed. By default it uses the external clock and assumes a speed of 66MHz, which effectively halfs the frequency currently used. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] ablkcipher: Add distinct ABLKCIPHER typeHerbert Xu1-1/+1
Up until now we have ablkcipher algorithms have been identified as type BLKCIPHER with the ASYNC bit set. This is suboptimal because ablkcipher refers to two things. On the one hand it refers to the top-level ablkcipher interface with requests. On the other hand it refers to and algorithm type underneath. As it is you cannot request a synchronous block cipher algorithm with the ablkcipher interface on top. This is a problem because we want to be able to eventually phase out the blkcipher top-level interface. This patch fixes this by making ABLKCIPHER its own type, just as we have distinct types for HASH and DIGEST. The type it associated with the algorithm implementation only. Which top-level interface is used for synchronous block ciphers is then determined by the mask that's used. If it's a specific mask then the old blkcipher interface is given, otherwise we go with the new ablkcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] hifn: Add missing includesAndrew Morton1-0/+2
alpha: drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_init': drivers/crypto/hifn_795x.c:1231: error: implicit declaration of function 'sg_init_table' drivers/crypto/hifn_795x.c:1243: error: implicit declaration of function 'sg_set_page' drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_exit': drivers/crypto/hifn_795x.c:1257: error: implicit declaration of function 'sg_page' drivers/crypto/hifn_795x.c:1257: warning: passing argument 1 of '__free_pages' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_add': drivers/crypto/hifn_795x.c:1278: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk': drivers/crypto/hifn_795x.c:1336: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_setup_session': drivers/crypto/hifn_795x.c:1465: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1469: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1472: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_get': drivers/crypto/hifn_795x.c:1593: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast {standard input}: Assembler messages: {standard input}:7: Warning: setting incorrect section attributes for .got drivers/crypto/hifn_795x.c: In function 'hifn_process_ready': drivers/crypto/hifn_795x.c:1653: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_probe': drivers/crypto/hifn_795x.c:2438: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/crypto/hifn_795x.c:2438: error: (Each undeclared identifier is reported only once drivers/crypto/hifn_795x.c:2438: error: for each function it appears in.) drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>