summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/sunxi-ss
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09crypto: skcipher - remove useless setting of type flagsEric Biggers1-11/+5
Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER. But this is redundant with the C structure type ('struct skcipher_alg'), and crypto_register_skcipher() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the skcipher algorithms. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: ahash - remove useless setting of cra_typeEric Biggers1-2/+0
Some ahash algorithms set .cra_type = &crypto_ahash_type. But this is redundant with the C structure type ('struct ahash_alg'), and crypto_register_ahash() already sets the .cra_type automatically. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the ahash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: ahash - remove useless setting of type flagsEric Biggers1-2/+0
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH. But this is redundant with the C structure type ('struct ahash_alg'), and crypto_register_ahash() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the ahash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ssPeter Robinson1-0/+1
The MODULE_ALIAS is required to enable the sun4i-ss driver to load automatically when built at a module. Tested on a Cubietruck. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generateArtem Savkov1-2/+2
Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning. Disabling softirqs to fix this. Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG") Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-08crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generateArtem Savkov1-1/+1
According to crypto/rng.h generate function should return 0 on success and < 0 on error. Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG") Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: sun4i-ss - support the Security System PRNGCorentin LABBE4-0/+98
The Security System has a PRNG, this patch adds support for it via crypto_rng. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - fix large block size supportAntoine Ténart1-0/+18
The run-time self-tests fail quite early, as soon as the input block size is larger than 64 bytes: alg: hash: Test 4 failed for sha1-sun4i-ss 00000000: b9 c9 1e 52 c0 26 d8 39 81 ff f2 3c 99 b1 27 b2 00000010: 30 d6 c9 85 One thing to notice is the value of the last word, which is the one expected (it can sometime be the last two words). The datasheet isn't very clear about when the digest is ready to retrieve and is seems the bit SS_DATA_END is cleared when the digest was computed *but* that doesn't mean the digest is ready to retrieve in the registers. A ndelay(1) is added before reading the computed digest to ensure it is available in the SS_MD[] registers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - add the CRYPTO_ALG_KERN_DRIVER_ONLY flagAntoine Ténart1-5/+10
The CRYPTO_ALG_KERN_DRIVER_ONLY flag is set for hardware accelerated ciphers accessible through a kernel driver only. This is the case for ciphers exposed by the sun4i-ss driver. This patch sets this flag. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - move from ablkcipher to skcipher APIAntoine Ténart3-224/+221
Update the sun4i-ss driver to use the skcipher API instead of the old ablkcipher one. It's a bit more tricky than s/ablkcipher/skcipher/, but still nothing special and the driver's logic stays the same. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - use GENMASK to generate masksAntoine Ténart1-3/+6
Use the GENMASK helper instead of custom calculations to generate masks, It also helps the readability. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - simplify the appended bit assignmentAntoine Ténart1-6/+2
A bit is appended at the end of the input buffer for sha1. Simplify the code assigning it. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - simplify the pad length calculationAntoine Ténart1-17/+12
When sending the last block of data to the engine, it should be padded so that the total length of the request can be given to the engine as the last 2 words of the last 64 bytes block. Simplify the calculation of this pad offset. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - do not dynamically set parts of the last buffer to 0Antoine Ténart1-2/+1
Parts of the bf buffer were dynamically set to 0. Change this to set the whole buffer to 0 by default to avoid any mistake. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - cannot use DMA is the request is 0 lengthAntoine Ténart1-1/+1
Do not use DMA is the request is 0 length. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - use lower/upper_32_bits helpersAntoine Ténart1-6/+6
Replace custom bit shifts and masks with lower/upper_32_bits helpers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - remove conditional checks against 0Antoine Ténart3-39/+39
Cosmetic clean up if conditional checks on 0s values. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: sun4i-ss - group variable definitions in sun4i_hash()Antoine Ténart1-20/+11
Cosmetic change to avoid having a full screen a variable definitions. It also helps to see which variables share the same type. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-09-22crypto: sun4i-ss - mark sun4i_hash() staticBaoyou Xie1-1/+1
We get 1 warning when building kernel with W=1: drivers/crypto/sunxi-ss/sun4i-ss-hash.c:168:5: warning: no previous prototype for 'sun4i_hash' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-24crypto: sun4i-ss - fix missing unlock on error in sun4i_hash()Wei Yongjun1-1/+2
Add the missing unlock before return from function sun4i_hash() in the error handling case. Fixes: 477d9b2e591b ("crypto: sun4i-ss - unify update/final function") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - fix indentation of two crypto algCorentin LABBE1-34/+34
Two crypto alg are badly indented, this patch fix this style issue. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - Always use sun4i_tfm_ctx for storing pointer to dev ssCorentin LABBE2-3/+11
The dev *ss is stored both in sun4i_tfm_ctx and sun4i_req_ctx. Since this pointer will never be changed during tfm life, it is better to remove it from sun4i_req_ctx. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - fix spellingCorentin LABBE1-2/+2
Two words are badly spelled, this patch respell them. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - clean unused ssCorentin LABBE1-2/+0
The ss variable is never used, remove it. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - unify update/final functionCorentin LABBE2-63/+85
The update and final functions have lots of common action. This patch mix them in one function. This will give some improvements: - This will permit asynchronous support more easily - This will permit to use finup/digest functions with some performance improvements Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16crypto: sun4i-ss - fix a few signed warningCorentin LABBE1-2/+4
The variable i is always checked against unsigned value and cannot be negative. This patch set it as unsigned. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}Corentin LABBE1-4/+6
The current sun4i-ss driver could generate data corruption when ciphering/deciphering. It occurs randomly on end of handled data. No root cause have been found and the only way to remove it is to replace all spin_lock_bh by their irq counterparts. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27crypto: sunxi - don't print confusing dataArnd Bergmann1-3/+2
gcc correctly warns that the printk output contains a variable that it thinks is not initialized in some cases: drivers/crypto/sunxi-ss/sun4i-ss-cipher.c: In function 'sun4i_ss_cipher_poll': drivers/crypto/sunxi-ss/sun4i-ss-cipher.c:254:76: warning: 'todo' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/crypto/sunxi-ss/sun4i-ss-cipher.c:144:15: note: 'todo' was declared here A closer look at the function reveals that the variable is always initialized at this point (ileft is guaranteed to be positive at the start), but its contents are not well-defined: Depending on some other variables, it might be either a count in words or bytes, and it could refer to either input or output. The easiest solution apparently is to remove the confusing output and let the reader figure out the state from the other variables. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-11-17crypto: sun4i-ss - add missing statesizeLABBE Corentin1-0/+2
sun4i-ss implementaton of md5/sha1 is via ahash algorithms. Commit 8996eafdcbad ("crypto: ahash - ensure statesize is non-zero") made impossible to load them without giving statesize. This patch specifiy statesize for sha1 and md5. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> # v4.3+ Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-10crypto: sunxi-ss - Fix a possible driver hang with ciphersLABBE Corentin1-1/+1
The sun4i_ss_opti_poll function cipher data until the output miter have a length of 0. If the crypto API client, give more SGs than necessary this could result in an infinite loop. Fix it by checking for remaining bytes, just like sun4i_ss_cipher_poll(). Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-13crypto: sunxi-ss - Add optional reset control supportChen-Yu Tsai2-0/+24
On sun6i and later platforms, the reset control is split out of the clock gates. Add support for an optional reset control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-20crypto: sunxi-ss - Add Allwinner Security System crypto acceleratorLABBE Corentin5-0/+1638
Add support for the Security System included in Allwinner SoC A20. The Security System is a hardware cryptographic accelerator that support: - MD5 and SHA1 hash algorithms - AES block cipher in CBC/ECB mode with 128/196/256bits keys. - DES and 3DES block cipher in CBC/ECB mode Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>