| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In AES-ECB mode crypt is done with key only, so any use of IV
can cause kernel Oops. Use IV only in AES-CBC and AES-CTR.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org # can be applied after commit 8f9702aad138
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace GPL license statement with SPDX GPL-2.0 license identifier.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This code seems correct, but the goto was indented too far.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
It uses the crypto framework asynchronous hash api.
It is based on omap-sham.c driver.
S5P has some HW differencies and is not implemented.
Modifications in s5p-sss:
- Add hash supporting structures and functions.
- Modify irq handler to handle both aes and hash signals.
- Resize resource end in probe if EXYNOS_HASH is enabled in
Kconfig.
- Add new copyright line and new author.
- Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
with crypto run-time self test testmgr
and with tcrypt module with: modprobe tcrypt sec=1 mode=N
where N=402, 403, 404 (MD5, SHA1, SHA256).
Modifications in drivers/crypto/Kconfig:
- Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
and CRYPTO_DEV_S5P
- Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
as they are needed for fallback.
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change #define lines to use tabs consistently.
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add kernel-doc to s5p_aes_dev structure.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The driver uses type of device (variant) only during probe so there is
no need to store it for later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Driver is capable of handling only one request at a time and it stores
it in its state container struct s5p_aes_dev. This stored request must be
protected between concurrent invocations (e.g. completing current
request and scheduling new one). Combination of lock and "busy" field
is used for that purpose.
When "busy" field is true, the driver will not accept new request thus
it will not overwrite currently handled data.
However commit 28b62b145868 ("crypto: s5p-sss - Fix spinlock recursion
on LRW(AES)") moved some of the write to "busy" field out of a lock
protected critical section. This might lead to potential race between
completing current request and scheduling a new one. Effectively the
request completion might try to operate on new crypto request.
Cc: <stable@vger.kernel.org> # v4.10.x
Fixes: 28b62b145868 ("crypto: s5p-sss - Fix spinlock recursion on LRW(AES)")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Running TCRYPT with LRW compiled causes spinlock recursion:
testing speed of async lrw(aes) (lrw(ecb-aes-s5p)) encryption
tcrypt: test 0 (256 bit key, 16 byte blocks): 19007 operations in 1 seconds (304112 bytes)
tcrypt: test 1 (256 bit key, 64 byte blocks): 15753 operations in 1 seconds (1008192 bytes)
tcrypt: test 2 (256 bit key, 256 byte blocks): 14293 operations in 1 seconds (3659008 bytes)
tcrypt: test 3 (256 bit key, 1024 byte blocks): 11906 operations in 1 seconds (12191744 bytes)
tcrypt: test 4 (256 bit key, 8192 byte blocks):
BUG: spinlock recursion on CPU#1, irq/84-10830000/89
lock: 0xeea99a68, .magic: dead4ead, .owner: irq/84-10830000/89, .owner_cpu: 1
CPU: 1 PID: 89 Comm: irq/84-10830000 Not tainted 4.11.0-rc1-00001-g897ca6d0800d #559
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c010e1ec>] (unwind_backtrace) from [<c010ae1c>] (show_stack+0x10/0x14)
[<c010ae1c>] (show_stack) from [<c03449c0>] (dump_stack+0x78/0x8c)
[<c03449c0>] (dump_stack) from [<c015de68>] (do_raw_spin_lock+0x11c/0x120)
[<c015de68>] (do_raw_spin_lock) from [<c0720110>] (_raw_spin_lock_irqsave+0x20/0x28)
[<c0720110>] (_raw_spin_lock_irqsave) from [<c0572ca0>] (s5p_aes_crypt+0x2c/0xb4)
[<c0572ca0>] (s5p_aes_crypt) from [<bf1d8aa4>] (do_encrypt+0x78/0xb0 [lrw])
[<bf1d8aa4>] (do_encrypt [lrw]) from [<bf1d8b00>] (encrypt_done+0x24/0x54 [lrw])
[<bf1d8b00>] (encrypt_done [lrw]) from [<c05732a0>] (s5p_aes_complete+0x60/0xcc)
[<c05732a0>] (s5p_aes_complete) from [<c0573440>] (s5p_aes_interrupt+0x134/0x1a0)
[<c0573440>] (s5p_aes_interrupt) from [<c01667c4>] (irq_thread_fn+0x1c/0x54)
[<c01667c4>] (irq_thread_fn) from [<c0166a98>] (irq_thread+0x12c/0x1e0)
[<c0166a98>] (irq_thread) from [<c0136a28>] (kthread+0x108/0x138)
[<c0136a28>] (kthread) from [<c0107778>] (ret_from_fork+0x14/0x3c)
Interrupt handling routine was calling req->base.complete() under
spinlock. In most cases this wasn't fatal but when combined with some
of the cipher modes (like LRW) this caused recursion - starting the new
encryption (s5p_aes_crypt()) while still holding the spinlock from
previous round (s5p_aes_complete()).
Beside that, the s5p_aes_interrupt() error handling path could execute
two completions in case of error for RX and TX blocks.
Rewrite the interrupt handling routine and the completion by:
1. Splitting the operations on scatterlist copies from
s5p_aes_complete() into separate s5p_sg_done(). This still should be
done under lock.
The s5p_aes_complete() now only calls req->base.complete() and it has
to be called outside of lock.
2. Moving the s5p_aes_complete() out of spinlock critical sections.
In interrupt service routine s5p_aes_interrupts(), it appeared in few
places, including error paths inside other functions called from ISR.
This code was not so obvious to read so simplify it by putting the
s5p_aes_complete() only within ISR level.
Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Cc: <stable@vger.kernel.org> # v4.10.x: 07de4bc88c crypto: s5p-sss - Fix completing
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In a regular interrupt handler driver was finishing the crypt/decrypt
request by calling complete on crypto request. This is disallowed since
converting to skcipher in commit b286d8b1a690 ("crypto: skcipher - Add
skcipher walk interface") and causes a warning:
WARNING: CPU: 0 PID: 0 at crypto/skcipher.c:430 skcipher_walk_first+0x13c/0x14c
The interrupt is marked shared but in fact there are no other users
sharing it. Thus the simplest solution seems to be to just use a
threaded interrupt handler, after converting it to oneshot.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Bring some consistency by:
1. Replacing fixed-space indentation of structure members with just
tabs.
2. Remove indentation in declaration of local variable between type and
name. Driver was mixing usage of such indentation and lack of it.
When removing indentation, reorder variables in
reversed-christmas-tree order with first variables being initialized
ones.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sg_dma_len() macro can be used only on scattelists which are mapped, so
all calls to it before dma_map_sg() are invalid. Replace them by proper
check for direct sg segment length read.
Fixes: a49e490c7a8a ("crypto: s5p-sss - add S5PV210 advanced crypto engine support")
Fixes: 9e4a1100a445 ("crypto: s5p-sss - Handle unaligned buffers")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The tcrypt testing module on Exynos5422-based Odroid XU3/4 board failed on
testing 8 kB size blocks:
$ sudo modprobe tcrypt sec=1 mode=500
testing speed of async ecb(aes) (ecb-aes-s5p) encryption
test 0 (128 bit key, 16 byte blocks): 21971 operations in 1 seconds (351536 bytes)
test 1 (128 bit key, 64 byte blocks): 21731 operations in 1 seconds (1390784 bytes)
test 2 (128 bit key, 256 byte blocks): 21932 operations in 1 seconds (5614592 bytes)
test 3 (128 bit key, 1024 byte blocks): 21685 operations in 1 seconds (22205440 bytes)
test 4 (128 bit key, 8192 byte blocks):
This was caused by a race issue of missed BRDMA_DONE ("Block cipher
Receiving DMA") interrupt. Device starts processing the data in DMA mode
immediately after setting length of DMA block: receiving (FCBRDMAL) or
transmitting (FCBTDMAL). The driver sets these lengths from interrupt
handler through s5p_set_dma_indata() function (or xxx_setdata()).
However the interrupt handler was first dealing with receive buffer
(dma-unmap old, dma-map new, set receive block length which starts the
operation), then with transmit buffer and finally was clearing pending
interrupts (FCINTPEND). Because of the time window between setting
receive buffer length and clearing pending interrupts, the operation on
receive buffer could end already and driver would miss new interrupt.
User manual for Exynos5422 confirms in example code that setting DMA
block lengths should be the last operation.
The tcrypt hang could be also observed in following blocked-task dmesg:
INFO: task modprobe:258 blocked for more than 120 seconds.
Not tainted 4.6.0-rc4-next-20160419-00005-g9eac8b7b7753-dirty #42
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
modprobe D c06b09d8 0 258 256 0x00000000
[<c06b09d8>] (__schedule) from [<c06b0f24>] (schedule+0x40/0xac)
[<c06b0f24>] (schedule) from [<c06b49f8>] (schedule_timeout+0x124/0x178)
[<c06b49f8>] (schedule_timeout) from [<c06b17fc>] (wait_for_common+0xb8/0x144)
[<c06b17fc>] (wait_for_common) from [<bf0013b8>] (test_acipher_speed+0x49c/0x740 [tcrypt])
[<bf0013b8>] (test_acipher_speed [tcrypt]) from [<bf003e8c>] (do_test+0x2240/0x30ec [tcrypt])
[<bf003e8c>] (do_test [tcrypt]) from [<bf008048>] (tcrypt_mod_init+0x48/0xa4 [tcrypt])
[<bf008048>] (tcrypt_mod_init [tcrypt]) from [<c010177c>] (do_one_initcall+0x3c/0x16c)
[<c010177c>] (do_one_initcall) from [<c0191ff0>] (do_init_module+0x5c/0x1ac)
[<c0191ff0>] (do_init_module) from [<c0185610>] (load_module+0x1a30/0x1d08)
[<c0185610>] (load_module) from [<c0185ab0>] (SyS_finit_module+0x8c/0x98)
[<c0185ab0>] (SyS_finit_module) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c)
Fixes: a49e490c7a8a ("crypto: s5p-sss - add S5PV210 advanced crypto engine support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The BIT() macro is obvious and well known, so prefer to use it instead
of crafted own macro.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Beside regular feed control interrupt, the driver requires also hash
interrupt for older SoCs (samsung,s5pv210-secss). However after
requesting it, the interrupt handler isn't doing anything with it, not
even clearing the hash interrupt bit.
Driver does not provide hash functions so it is safe to remove the hash
interrupt related code and to not require the interrupt in Device Tree.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The driver makes copies of memory (input or output scatterlists) if they
are not aligned. In s5p_aes_crypt_start() error path (on unsuccessful
initialization of output scatterlist), if input scatterlist was not
aligned, the driver first freed copied input memory and then unmapped it
from the device, instead of doing otherwise (unmap and then free).
This was wrong in two ways:
1. Freed pages were still mapped to the device.
2. The dma_unmap_sg() iterated over freed scatterlist structure.
The call to s5p_free_sg_cpy() in this error path is not needed because
the copied scatterlists will be freed by s5p_aes_complete().
Fixes: 9e4a1100a445 ("crypto: s5p-sss - Handle unaligned buffers")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Sort the headers alphabetically to improve readability and to spot
duplications easier.
Suggested-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
During crypto selftests on Odroid XU3 (Exynos5422) some of the
algorithms failed because of passing AES-block unaligned source and
destination buffers:
alg: skcipher: encryption failed on chunk test 1 for ecb-aes-s5p: ret=22
Handle such case by copying the buffers to a new aligned and contiguous
space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unneeded inclusion of delay.h and get rid of indentation from
labels.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use memcpy_toio to fix following sparse warning:
drivers/crypto/s5p-sss.c:386:40: warning: incorrect type in argument 1 (different address spaces)
drivers/crypto/s5p-sss.c:386:40: expected void *<noident>
drivers/crypto/s5p-sss.c:386:40: got void [noderef] <asn:2>*
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Improve a little bit code readability and use dev_info/err for printing
messages.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
As we are preparing to enable multiplatform support on EXYNOS,
we can no longer include mach/*.h or plat/*.h headers from device
drivers.
The s5p-sss driver was just enabled for EXYNOS when it used to
be used only on s5pv210, and it includes two samsung platform
specific header files for historic reasons. Fortunately, it no
longer actually needs them, so we can remove the #includes and
avoid the problem
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: <linux-samsung-soc@vger.kernel.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the driver enqueues a request only if the busy bit is
false. And every request initiates a dequeue. If 2 requests arrive
simultaneously, only one of them will be dequeued.
To avoid this senario, we will enqueue the next request irrespective
of the system condition (that is what queue is here for). Also
schedule at a tasklet immediatly after the current request is done.
The tasklet will dequeue the next request in the queue, giving
continuous loop. tasklet will exit if there are no requests in the
queue.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch set adds use of clk_prepare/clk_unprepare as
required by generic clock framework.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds code to validate "iv" buffer before trying to
memcpy the contents
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds new compatible and variant struct to support the SSS
module on Exynos4 (Exynos4210), Exynos5 (Exynos5420 and Exynos5250)
for which
1. AES register are at an offset of 0x200 and
2. hash interrupt is not available
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds device tree support to the s5p-sss.c crypto driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch uses the platform_get_irq() instead of the
platform_get_irq_byname(). Making feeder control interrupt
as resource "0" and hash interrupt as "1".
reasons for this change.
1. Cannot find any Arch which is currently using this driver
2. Samsung Exynos4 and 5 SoCs only use the feeder control interrupt
3. Patches adding support for DT and H/W version are in pipeline
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
CC: David S. Miller <davem@davemloft.net>
CC: <linux-samsung-soc@vger.kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_clk_get() rather than clk_get() to make cleanup paths
more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
struct s3c2410_dma_client gets defined multiple times as it is defined
in more than one header file. Changing it at the header file level causes
many more build breakages as they are interdependent in a complex way.
Hence fixing this problem by using the mach version of the header file.
Without this patch, following build error is observed:
arch/arm/plat-samsung/include/plat/dma-pl330.h:106:27: error:
redefinition of struct s3c2410_dma_client
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Initialization of cra_list is currently mixed, most ciphers initialize this
field and most shashes do not. Initialization however is not needed at all
since cra_list is initialized/overwritten in __crypto_register_alg() with
list_add(). Therefore perform cleanup to remove all unneeded initializations
of this field in 'crypto/drivers/'.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-geode@lists.infradead.org
Cc: Michal Ludvig <michal@logix.cz>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Cc: Varun Wadekar <vwadekar@nvidia.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Kent Yoder <key@linux.vnet.ibm.com>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher
is only available via a kernel driver. If the cipher implementation
might be available by using an instruction set or by porting the
kernel code, then it must not be set.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts the drivers in drivers/crypto/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: James Hsiao <jhsiao@amcc.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This change adds support for AES encrypting and decrypting using
advanced crypto engine found on Samsung S5PV210 and S5PC110 SoCs.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
