summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/marvell
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09crypto: remove redundant type flags from tfm allocationEric Biggers1-2/+1
Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also specifying the type flags for $FOO, e.g. crypto_alloc_shash() with CRYPTO_ALG_TYPE_SHASH. But, that's redundant since the crypto API will override any specified type flag/mask with the correct ones. So, remove the unneeded flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+1
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-03crypto: marvell/cesa - Clean up redundant #includeRobin Murphy1-1/+0
The inclusion of dma-direct.h was only needed temporarily to prevent breakage from the DMA API rework, since the actual CESA fix making it redundant was merged in parallel. Now that both have landed, it can go. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-31Merge branch 'linus' of ↵Linus Torvalds1-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-18crypto: marvell/cesa - Fix DMA API misuseRobin Murphy1-7/+12
phys_to_dma() is an internal helper for certain DMA API implementations, and is not appropriate for drivers to use. It appears that what the CESA driver really wants to be using is dma_map_resource() - admittedly that didn't exist when the offending code was first merged, but it does now. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-10dma-mapping: move swiotlb arch helpers to a new headerChristoph Hellwig1-0/+1
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds4-276/+261
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-06crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]Boris BREZILLON1-0/+1
struct platform_device_id should be NULL terminated to let the core detect where the last entry is. Fixes: 07c50a8be41a ("crypto: marvell - Add a platform_device_id table") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell/cesa - remove redundant backlog checks on EBUSYGilad Ben-Yossef2-3/+2
Now that -EBUSY return code only indicates backlog queueing we can safely remove the now redundant check for the CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Switch cipher algs to the skcipher interfaceBoris BREZILLON3-260/+251
crypto_alg is not supposed to be directly implemented by crypto engine driver. Drivers should instead implement specialized interfaces like ahash_alg or skcipher_alg. Migrate to all cipher algorithms to the skcipher_alg interface. While at it, get rid of all references to ablkcipher including in internal struct or function names. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Remove the old mv_cesa driverBoris BREZILLON1-7/+0
All defconfigs selecting the old driver have been patched to select the new one instead. We can now remove the old driver along with the allhwsupports module parameter in the new driver that was used to check whether the new driver was allowed to take control of the CESA engine or not. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell - Add a platform_device_id tableBoris BREZILLON1-0/+6
Add a platform_device_id table to allow using this driver on orion platforms that have not been converted to DT. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22crypto: drop unnecessary return statementsGeliang Tang1-2/+0
Fix checkpatch.pl warnings: WARNING: void function return statements are not generally useful FILE: crypto/rmd128.c:218: FILE: crypto/rmd160.c:261: FILE: crypto/rmd256.c:233: FILE: crypto/rmd320.c:280: FILE: crypto/tcrypt.c:385: FILE: drivers/crypto/ixp4xx_crypto.c:538: FILE: drivers/crypto/marvell/cesa.c:81: FILE: drivers/crypto/ux500/cryp/cryp_core.c:1755: Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: Use PTR_ERR_ZEROHimanshu Jha1-4/+1
Use PTR_ERROR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Build successfully. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-05-23crypto: marvell - Use IPAD/OPAD constantCorentin LABBE1-2/+3
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their define. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27Merge branch 'linus' of ↵Linus Torvalds3-3/+43
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
2016-12-16crypto: marvell - Copy IVDIG before launching partial DMA ahash requestsRomain Perier3-3/+43
Currently, inner IV/DIGEST data are only copied once into the hash engines and not set explicitly before launching a request that is not a first frag. This is an issue especially when multiple ahash reqs are computed in parallel or chained with cipher request, as the state of the request being computed is not updated into the hash engine. It leads to non-deterministic corrupted digest results. Fixes: commit 2786cee8e50b ("crypto: marvell - Move SRAM I/O operations to step functions") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-14Merge branch 'linus' of ↵Linus Torvalds5-40/+75
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.10: API: - add skcipher walk interface - add asynchronous compression (acomp) interface - fix algif_aed AIO handling of zero buffer Algorithms: - fix unaligned access in poly1305 - fix DRBG output to large buffers Drivers: - add support for iMX6UL to caam - fix givenc descriptors (used by IPsec) in caam - accelerated SHA256/SHA512 for ARM64 from OpenSSL - add SSE CRCT10DIF and CRC32 to ARM/ARM64 - add AEAD support to Chelsio chcr - add Armada 8K support to omap-rng" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (148 commits) crypto: testmgr - fix overlap in chunked tests again crypto: arm/crc32 - accelerated support based on x86 SSE implementation crypto: arm64/crc32 - accelerated support based on x86 SSE implementation crypto: arm/crct10dif - port x86 SSE implementation to ARM crypto: arm64/crct10dif - port x86 SSE implementation to arm64 crypto: testmgr - add/enhance test cases for CRC-T10DIF crypto: testmgr - avoid overlap in chunked tests crypto: chcr - checking for IS_ERR() instead of NULL crypto: caam - check caam_emi_slow instead of re-lookup platform crypto: algif_aead - fix AIO handling of zero buffer crypto: aes-ce - Make aes_simd_algs static crypto: algif_skcipher - set error code when kcalloc fails crypto: caam - make aamalg_desc a proper module crypto: caam - pass key buffers with typesafe pointers crypto: arm64/aes-ce-ccm - Fix AEAD decryption length MAINTAINERS: add crypto headers to crypto entry crypt: doc - remove misleading mention of async API crypto: doc - fix header file name crypto: api - fix comment typo crypto: skcipher - Add separate walker for AEAD decryption ..
2016-12-07crypto: marvell - Don't corrupt state of an STD req for re-stepped ahashRomain Perier1-3/+5
mv_cesa_hash_std_step() copies the creq->state into the SRAM at each step, but this is only required on the first one. By doing that, we overwrite the engine state, and get erroneous results when the crypto request is split in several chunks to fit in the internal SRAM. This commit changes the function to copy the state only on the first step. Fixes: commit 2786cee8e50b ("crypto: marvell - Move SRAM I/O op...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-07crypto: marvell - Don't copy hash operation twice into the SRAMRomain Perier1-3/+0
No need to copy the template of an hash operation twice into the SRAM from the step function. Fixes: commit 85030c5168f1 ("crypto: marvell - Add support for chai...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21crypto: marvell - Don't break chain for computable last ahash requestsRomain Perier1-16/+49
Currently, the driver breaks chain for all kind of hash requests in order to don't override intermediate states of partial ahash updates. However, some final ahash requests can be directly processed by the engine, and so without intermediate state. This is typically the case for most for the HMAC requests processed via IPSec. This commits adds a TDMA descriptor to copy context for these of requests into the "op" dma pool, then it allow to chain these requests at the DMA level. The 'complete' operation is also updated to retrieve the MAC digest from the right location. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-21crypto: marvell - Use an unique pool to copy results of requestsRomain Perier4-24/+26
So far, we used a dedicated dma pool to copy the result of outer IV for cipher requests. Instead of using a dma pool per outer data, we prefer use the op dma pool that contains all part of the request from the SRAM. Then, the outer data that is likely to be used by the 'complete' operation, is copied later. In this way, any type of result can be retrieved by DMA for cipher or ahash requests. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - Don't hardcode block size in mv_cesa_ahash_cache_reqRomain Perier1-1/+1
Don't use 64 'as is', as max block size in mv_cesa_ahash_cache_req. Use CESA_MAX_HASH_BLOCK_SIZE instead, this is better for readability. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - Don't overwrite default creq->state during initializationRomain Perier1-6/+9
Currently, in mv_cesa_{md5,sha1,sha256}_init creq->state is initialized before the call to mv_cesa_ahash_init. This is wrong because this function fills creq with zero by using memset, so its 'state' that contains the default DIGEST is overwritten. This commit fixes the issue by initializing creq->state just after the call to mv_cesa_ahash_init. Fixes: commit b0ef51067cb4 ("crypto: marvell/cesa - initialize hash...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - Update transformation context for each dequeued reqRomain Perier1-0/+1
So far, sub part of mv_cesa_int was responsible of dequeuing complete requests, then call the 'cleanup' operation on these reqs and call the crypto api callback 'complete'. The problem is that the transformation context 'ctx' is retrieved only once before the while loop. Which means that the wrong 'cleanup' operation might be called on the wrong type of cesa requests, it can lead to memory corruptions with this message: marvell-cesa f1090000.crypto: dma_pool_free cesa_padding, 5a5a5a5a/5a5a5a5a (bad dma) This commit fixes the issue, by updating the transformation context for each dequeued cesa request. Fixes: commit 85030c5168f1 ("crypto: marvell - Add support for chai...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - make mv_cesa_ahash_cache_req() return boolThomas Petazzoni1-11/+9
The mv_cesa_ahash_cache_req() function always returns 0, which makes its return value pretty much useless. However, in addition to returning a useless value, it also returns a boolean in a variable passed by reference to indicate if the request was already cached. So, this commit changes mv_cesa_ahash_cache_req() to return this boolean. It consequently simplifies the only call site of mv_cesa_ahash_cache_req(), where the "ret" variable is no longer needed. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - turn mv_cesa_ahash_init() into a function returning voidThomas Petazzoni1-3/+1
The mv_cesa_ahash_init() function always returns 0, and the return value is anyway never checked. Turn it into a function returning void. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - remove unused parameter in mv_cesa_ahash_dma_add_cache()Thomas Petazzoni1-2/+1
The dma_iter parameter of mv_cesa_ahash_dma_add_cache() is never used, so get rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-09crypto: marvell - be explicit about destination in mv_cesa_dma_add_op()Thomas Petazzoni1-0/+1
The mv_cesa_dma_add_op() function builds a mv_cesa_tdma_desc structure to copy the operation description to the SRAM, but doesn't explicitly initialize the destination of the copy. It works fine because the operatin description must be copied at the beginning of the SRAM, and the mv_cesa_tdma_desc structure is initialized to zero when allocated. However, it is somewhat confusing to not have a destination defined. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-29crypto: marvell - Don't copy IV vectors from the _process op for ciphersRomain Perier1-10/+1
The IV output vectors should only be copied from the _complete operation and not from the _process operation, i.e only from the operation that is designed to copy the result of the request to the right location. This copy is already done in the _complete operation, so this commit removes the duplicated code in the _process op. Fixes: 3610d6cd5231 ("crypto: marvell - Add a complete...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-28crypto: marvell - Update cache with input sg only when it is unmappedRomain Perier1-6/+6
So far, the cache of the ahash requests was updated from the 'complete' operation. This complete operation is called from mv_cesa_tdma_process before the cleanup operation, which means that the content of req->src can be read and copied when it is still mapped. This commit fixes the issue by moving this cache update from mv_cesa_ahash_complete to mv_cesa_ahash_req_cleanup, so the copy is done once the sglist is unmapped. Fixes: 1bf6682cb31d ("crypto: marvell - Add a complete operation for..") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-28crypto: marvell - Don't chain at DMA level when backlog is disabledRomain Perier1-3/+4
The flag CRYPTO_TFM_REQ_MAY_BACKLOG is optional and can be set from the user to put requests into the backlog queue when the main cryptographic queue is full. Before calling mv_cesa_tdma_chain we must check the value of the return status to be sure that the current request has been correctly queued or added to the backlog. Fixes: 85030c5168f1 ("crypto: marvell - Add support for chaining...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-28crypto: marvell - Fix memory leaks in TDMA chain for cipher requestsRomain Perier1-8/+6
So far in mv_cesa_ablkcipher_dma_req_init, if an error is thrown while the tdma chain is built there is a memory leak. This issue exists because the chain is assigned later at the end of the function, so the cleanup function is called with the wrong version of the chain. Fixes: db509a45339f ("crypto: marvell/cesa - add TDMA support") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-19crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_opRomain Perier1-1/+1
Use the parameter 'gfp_flags' instead of 'flag' as second argument of dma_pool_alloc(). The parameter 'flag' is for the TDMA descriptor, its content has no sense for the allocator. Fixes: bac8e805a30d ("crypto: marvell - Copy IV vectors by DMA...") Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Increase the size of the crypto queueRomain Perier1-1/+1
Now that crypto requests are chained together at the DMA level, we increase the size of the crypto queue for each engine. The result is that as the backlog list is reached later, it does not stop the crypto stack from sending asychronous requests, so more cryptographic tasks are processed by the engines. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Add support for chaining crypto requests in TDMA modeRomain Perier5-27/+221
The Cryptographic Engines and Security Accelerators (CESA) supports the Multi-Packet Chain Mode. With this mode enabled, multiple tdma requests can be chained and processed by the hardware without software intervention. This mode was already activated, however the crypto requests were not chained together. By doing so, we reduce significantly the number of IRQs. Instead of being interrupted at the end of each crypto request, we are interrupted at the end of the last cryptographic request processed by the engine. This commits re-factorizes the code, changes the code architecture and adds the required data structures to chain cryptographic requests together before sending them to an engine (stopped or possibly already running). Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Add load balancing between enginesRomain Perier4-86/+84
This commits adds support for fine grained load balancing on multi-engine IPs. The engine is pre-selected based on its current load and on the weight of the crypto request that is about to be processed. The global crypto queue is also moved to each engine. These changes are required to allow chaining crypto requests at the DMA level. By using a crypto queue per engine, we make sure that we keep the state of the tdma chain synchronized with the crypto queue. We also reduce contention on 'cesa_dev->lock' and improve parallelism. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Move SRAM I/O operations to step functionsRomain Perier2-12/+12
Currently the crypto requests were sent to engines sequentially. This commit moves the SRAM I/O operations from the prepare to the step functions. It provides flexibility for future works and allow to prepare a request while the engine is running. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Add a complete operation for async requestsRomain Perier4-15/+39
So far, the 'process' operation was used to check if the current request was correctly handled by the engine, if it was the case it copied information from the SRAM to the main memory. Now, we split this operation. We keep the 'process' operation, which still checks if the request was correctly handled by the engine or not, then we add a new operation for completion. The 'complete' method copies the content of the SRAM to memory. This will soon become useful if we want to call the process and the complete operations from different locations depending on the type of the request (different cleanup logic). Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Move tdma chain out of mv_cesa_tdma_req and remove itRomain Perier5-98/+84
Currently, the only way to access the tdma chain is to use the 'req' union from a mv_cesa_{ablkcipher,ahash}. This will soon become a problem if we want to handle the TDMA chaining vs standard/non-DMA processing in a generic way (with generic functions at the cesa.c level detecting whether the request should be queued at the DMA level or not). Hence the decision to move the chain field a the mv_cesa_req level at the expense of adding 2 void * fields to all request contexts (including non-DMA ones) and to remove the type completly. To limit the overhead, we get rid of the type field, which can now be deduced from the req->chain.first value. Once these changes are done the union is no longer needed, so remove it and move mv_cesa_ablkcipher_std_req and mv_cesa_req to mv_cesa_ablkcipher_req directly. There are also no needs to keep the 'base' field into the union of mv_cesa_ahash_req, so move it into the upper structure. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Copy IV vectors by DMA transfers for acipher requestsRomain Perier4-9/+60
Add a TDMA descriptor at the end of the request for copying the output IV vector via a DMA transfer. This is a good way for offloading as much as processing as possible to the DMA and the crypto engine. This is also required for processing multiple cipher requests in chained mode, otherwise the content of the IV vector would be overwritten by the last processed request. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Fix wrong type check in dma functionsRomain Perier1-2/+3
So far, the way that the type of a TDMA operation was checked was wrong. We have to use the type mask in order to get the right part of the flag containing the type of the operation. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Check engine is not already running when enabling a reqRomain Perier3-0/+6
Add a BUG_ON() call when the driver tries to launch a crypto request while the engine is still processing the previous one. This replaces a silent system hang by a verbose kernel panic with the associated backtrace to let the user know that something went wrong in the CESA driver. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Add a macro constant for the size of the crypto queueRomain Perier1-1/+4
Adding a macro constant to be used for the size of the crypto queue, instead of using a numeric value directly. It will be easier to maintain in case we add more than one crypto queue of the same size. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-03crypto: marvell/cesa - Use dma_pool_zallocJulia Lawall1-3/+2
Dma_pool_zalloc combines dma_pool_alloc and memset 0. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression d,e; statement S; @@ d = - dma_pool_alloc + dma_pool_zalloc (...); if (!d) S - memset(d, 0, sizeof(*d)); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-20crypto: marvell/cesa - Improving code readabilityRomain Perier1-5/+5
When looking for available engines, the variable "engine" is assigned to "&cesa->engines[i]" at the beginning of the for loop. Replacing next occurences of "&cesa->engines[i]" by "engine" and in order to improve readability. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-04-05crypto: marvell/cesa - remove unneeded conditionDan Carpenter1-2/+1
creq->cache[] is an array inside the struct, it's not a pointer and it can't be NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-23Merge branch 'linus' of ↵Linus Torvalds3-70/+41
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: API: - Fix kzalloc error path crash in ecryptfs added by skcipher conversion. Note the subject of the commit is screwed up and the correct subject is actually in the body. Drivers: - A number of fixes to the marvell cesa hashing code. - Remove bogus nested irqsave that clobbers the saved flags in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell/cesa - forward devm_ioremap_resource() error code crypto: marvell/cesa - initialize hash states crypto: marvell/cesa - fix memory leak crypto: ccp - fix lock acquisition code eCryptfs: Use skcipher and shash
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 03:53:12 +0000