summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/hisilicon/qm.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24crypto: hisilicon/qm - implement for querying hardware tasks status.Wenkai Lin1-0/+18
This patch adds a function hisi_qm_is_q_updated to check if the task is ready in hardware queue when user polls an UACCE queue.This prevents users from repeatedly querying whether the accelerator has completed tasks, which wastes CPU resources. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/qm - supports to inquiry each function's QoSKai Ye1-7/+174
1. The ACC driver supports to inquiry each function's QoS in the Host and VM. The driver supports reading QoS by the device debug SysFS attribute file "alg_qos", like "cat alg_qos". 2. Modify the communication process between pf and vf as needed. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/qm - add pf ping single vf functionKai Ye1-0/+36
According to the function communication, add pf ping single vf function to be used in the vf read QoS. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/qm - merges the work initialization process into a single ↵Kai Ye1-7/+11
function Merges the work initialization process into a single function from qm initialization. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/qm - add the "alg_qos" file nodeKai Ye1-129/+155
1. Just move the code as needed. 2. Add the "alg_qos" file node in the qm debug sysfs. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/qm - supports writing QoS int the hostKai Ye1-2/+296
Based on the Token bucket algorithm. The HAC driver supports to configure each function's QoS in the host. The driver supports writing QoS by the debugfs node that named "alg_qos". The qos value is 1~1000. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/qm - update reset flowWeili Qian1-17/+262
This patch updates the reset flow based on PF/VF communications. VFs will be stopped after receiving reset message from PF, and wait for reset finish to restart VFs. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/qm - add callback to support communicationWeili Qian1-27/+190
This patch adds 'ping_all_vfs' callback that supports pf send message to all vfs and 'ping_pf' callback that supports vf send message to pf. After receiving the interrupt, the communication destination gets the message by sending mailbox. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/qm - enable PF and VFs communicationWeili Qian1-8/+105
Kunpeng930 hardware supports the communication between PF and VFs. This patch enables communication between PF and VFs by writing hardware registers, and requests an irq for communication. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/qm - adjust reset interfaceWeili Qian1-51/+89
Kunpeng930 hardware supports PF/VF communications. When the device is reset, PF can send message to VF to stop function and restart function. This patch adjusts the reset interface to support sending message through PF/VF communication. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon - switch to memdup_user_nul()Zou Wei1-10/+3
Use memdup_user_nul() helper instead of open-coding to simplify the code. v1-->v2: fixed patch title error v2-->v3: return the actual error Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - support address prefetchingLongfang Liu1-0/+35
Kunpeng930 hardware supports address prefetching to improve performance before doing tasks in SVA scenario. This patch enables this function in device initialization by writing hardware registers. In the process of reset, address prefetching is disabled to avoid the failure of interaction between accelerator device and SMMU. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - add MSI detection steps on Kunpeng930Weili Qian1-24/+100
Compared with Kunpeng920, Kunpeng930 adds MSI configuration steps to wait for the interrupt to be emptied. In order to be compatible with the kunpeng920 driver, 'set_msi' callback is added in 'hisi_qm_hw_ops' to configure hardware register. Call 'set_msi' to disable or enable MSI during reset. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - fix the process of VF's list addingKai Ye1-8/+8
If Kunpeng 920 enabled the sva mode, the "qm alg register" process will return directly. So the list of VF wasn't added to QM list. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - add dfx log if not use hardware crypto algsKai Ye1-2/+5
Add print information necessary if not use hardware crypto algs. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - enable to close master ooo when NFE occursWeili Qian1-40/+78
Kunpeng930 could be able to close master ooo when NFE occurs, which will disable memory accessing from device and execute tasks. This ensures that errors do not spread. This patch enables the hardware to close master ooo when an error occurs by writing hardware registers, and ensures that the driver will not drain qp because the hardware will empty the tasks automatically. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - adjust order of device error configurationWeili Qian1-1/+1
In order to avoid reporting an exception but the error type is not configured, the driver needs to configure the error type first, and then enable the error interrupt. Before executing the task, hardware error initialization is needed so that the hardware can detect the error in time. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - modify 'QM_RESETTING' clearing errorWeili Qian1-1/+1
Before device reset, the driver sets 'QM_RESETTING' flag, but after reset, the wrong flag is cleared. This patch modifies the problem of inconsistent flags. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - initialize the device before doing tasksWeili Qian1-6/+8
The device needs to be initialized first, and then restart the queue to execute tasks after PF reset. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - enable new error types for QMWeili Qian1-2/+4
QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on Kunpeng930. This patch enables the new error types and configures the error types as NFE. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - dynamic configuration 'err_info'Weili Qian1-12/+10
'err_info' does not support dynamic configuration since it is const type. Therefore, in order to support new error type later, 'err_info' is changed to dynamic configuration. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: hisilicon/qm - add stop queue by hardwareWeili Qian1-1/+28
Kunpeng930 could be able to stop queue by writing hardware registers, which will trigger tasks in device to be flushed out. In order to be compatible with the kunpeng920 driver, add 'qm_hw_ops_v3' to adapt Kunpeng930. And 'stop_qp' callback is added in 'qm_hw_ops_v3' to write hardware registers. Call 'stop_qp' to drain the tasks in device before releasing queue. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09crypto: hisilicon/qm - delete redundant codeKai Ye1-1/+0
The "qdma" is a structure variable instead of actual data. This structure doesn't need to be zerod, The memset is useless and redundant. So delete it. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - add queue isolation support for Kunpeng930Weili Qian1-47/+114
Kunpeng930 supports doorbell isolation to ensure that each queue has an independent doorbell address space. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - set the number of queues for functionWeili Qian1-26/+74
Kunpeng930 supports queue doorbell isolation. When doorbell isolation is enabled, it supports to obtain the maximum number of queues of one function from hardware register. Otherwise, the 'max_qp_num' is the total number of queues. When assigning queues to VF, it is necessary to ensure that the number of VF queues does not exceed 'max_qp_num'. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - move 'CURRENT_QM' code to qm.cWeili Qian1-14/+73
Since the code related to 'CURRENT_QM' debugfs is exactly same in sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - set the total number of queuesWeili Qian1-0/+16
Move the configuration of the total number of queues 'ctrl_qp_num' from sec2/hpre/zip to qm.c. And get the total number of queues from the hardware register for Kunpeng930. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon - fix the check on dma addressHui Tang1-1/+1
System may be able to get physical address of zero if not reserved by firmware. The dma address obtained by 'dma_alloc_coherent' is valid, since already checking cpu va before, so do not check again. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-13crypto: hisilicon/hpre - add version adapt to new algorithmsMeng Yu1-2/+2
A new generation of accelerator Kunpeng930 has appeared, and the corresponding driver needs to be updated to support some new algorithms of Kunpeng930. To be compatible with Kunpeng920, we add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to identify the chip's version. Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix printing format issueWeili Qian1-8/+8
This patch fixes inconsistent of printing format with argument type. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - do not reset hardware when CE happensWeili Qian1-6/+17
There is no need to reset hardware when Corrected Error(CE) happens. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - update irqflagSihang Chen1-4/+3
There is no need to share IRQ among several devices, and set 'irqflag' as 0. Signed-off-by: Sihang Chen <chensihang1@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'Weili Qian1-1/+1
Since the size of base number is 16 bits, update the value of 'QM_SQC_VFT_BASE_MASK_V2' as 'GENMASK(15, 0)'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix request missing errorWeili Qian1-0/+28
Add 'qp_stop_fail_cb' to ensure it is called as device is resetting. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - removing driver after resetWeili Qian1-16/+32
Add waiting logic for resetting as removing driver, otherwise call trace will occur due to releasing resource. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon - PASID fixed on Kunpeng 930Weili Qian1-0/+11
Enable PASID by setting 'sqc' and 'cqc' pasid bits per queue in Kunpeng 930. For Kunpeng 920, PASID is effective for all queues once set in SVA scenarios. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix use of 'dma_map_single'Weili Qian1-23/+27
Calling 'dma_map_single' after the data is written to ensure that the cpu cache and dma cache are consistent. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon - add ZIP device using mode parameterKai Ye1-1/+1
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1. '0' means ZIP is only registered to kernel crypto, and '1' means it's registered to both kernel crypto and UACCE. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon/qm - SVA bugfixed on Kunpeng920Kai Ye1-0/+6
Kunpeng920 SEC/HPRE/ZIP cannot support running user space SVA and kernel Crypto at the same time. Therefore, the algorithms should not be registered to Crypto as user space SVA is enabled. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'hisi_qm_init' into smaller piecesWeili Qian1-33/+53
'hisi_qm_init' initializes configuration of QM. To improve code readability, split it into two pieces. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'qm_eq_ctx_cfg' into smaller piecesWeili Qian1-12/+32
'qm_eq_ctx_cfg' initializes configuration of EQ and AEQ, split it into two pieces to improve code readability. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'qm_qp_ctx_cfg' into smaller piecesWeili Qian1-8/+28
'qm_qp_ctx_cfg' initializes configuration of SQ and CQ, split it into two pieces to improve code readability. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - replace 'sprintf' with 'scnprintf'Weili Qian1-1/+2
Replace 'sprintf' with 'scnprintf' to avoid overrun. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify return type of 'qm_set_sqctype'Weili Qian1-3/+1
Since 'qm_set_sqctype' always returns 0, change it as 'void'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify the return type of debugfs interfaceWeili Qian1-15/+4
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify the return type of functionWeili Qian1-2/+2
The returns of 'qm_get_hw_error_status' and 'qm_get_dev_err_status' are values from the hardware registers, which should not be defined as 'int', so update as 'u32'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - numbers are replaced by macrosWeili Qian1-7/+12
Some numbers are replaced by macros to avoid incomprehension. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-30crypto: hisilicon - Fix doc warnings in sgl.c and qm.cShiju Jose1-0/+13
Fix following warnings caused by mismatch between function parameters and function comments. drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'hw_sgl_dma' description in 'hisi_acc_sg_buf_unmap' drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'pool' description in 'hisi_acc_sg_buf_unmap' drivers/crypto/hisilicon/qm.c:1849: warning: Function parameter or member 'qp' not described in 'qm_drain_qp' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'qm' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'fun_num' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'base' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'number' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2620: warning: Function parameter or member 'qm' not described in 'qm_clear_queues' Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - remove the update of flagsWeili Qian1-1/+0
'qm_init_qp_status' is just a help function to initiate some 'QP' status. 'QP' status should be updated separately. This patch removes the updating flags in 'QP' status. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao1-11/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-02 12:18:51 +0000