summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/cavium
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.Srikanth Jampala8-263/+162
replace pci_enable_msix_exact() with pci_alloc_irq_vectors(). get the required vector count from pci_msix_vec_count(). use struct nitrox_q_vector as the argument to tasklets. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-05crypto: cavium/nitrox - NITROX command queue changes.Srikanth Jampala5-79/+94
Use node based allocations for queues. consider the dma address alignment changes, while calculating the queue base address. added checks in cleanup functions. Minor changes to queue variable names Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-05crypto: cavium/nitrox - use pcie_flr instead of duplicating itSrikanth Jampala1-10/+5
check the flr capability using pcie_has_flr() and do the flr. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-05crypto: cavium/nitrox - fix warnings while printing atomic64_t typesSrikanth Jampala1-4/+6
fix compilation warnings with nitrox_debugfs.c while printing atomic64_t types on arm64. typecast the atomic64_read() value to u64 This issue is reported by Ard Biesheuvel drivers/crypto/cavium/nitrox/nitrox_debugfs.c:62:30: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 3 has type ‘long int’ [-Wformat=] seq_printf(s, " Posted: %lld\n", atomic64_read(&ndev->stats.posted)); ^ Fixes: 2a8780be9c26 (crypto: cavium/nitrox - updated debugfs information) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28crypto: cavium - remove redundant null pointer check before kfreezhong jiang1-15/+5
kfree has taken the null pointer into account. hence it is safe to remove the redundant null pointer check before kfree. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28crypto: cavium/nitrox - updated debugfs information.Srikanth Jampala4-129/+127
Updated debugfs to provide device partname and frequency etc. New file "stats" shows the number of requests posted, dropped and completed. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28crypto: cavium/nitrox - add support for per device request statistics.Srikanth Jampala3-1/+20
Add per device statistics like number of requests posted, dropped and completed etc. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28crypto: cavium/nitrox - added support to identify the NITROX device partname.Srikanth Jampala5-22/+184
Get the device partname based on it's capabilities like, core frequency, number of cores and revision id. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21crypto: cavium/nitrox - use dma_pool_zalloc()Srikanth Jampala1-2/+2
use dma_pool_zalloc() instead of dma_pool_alloc with __GFP_ZERO flag. crypto dma pool renamed to "nitrox-context". Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-14crypto: cavium/nitrox - Added support for SR-IOV configuration.Srikanth Jampala8-30/+236
Added support to configure SR-IOV using sysfs interface. Supported VF modes are 16, 32, 64 and 128. Grouped the hardware configuration functions to "nitrox_hal.h" file. Changed driver version to "1.1". Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: cavium/nitrox - fix for command corruption in queue full case with ↵Srikanth Jampala3-26/+35
backlog submissions. Earlier used to post the current command without checking queue full after backlog submissions. So, post the current command only after confirming the space in queue after backlog submissions. Maintain host write index instead of reading device registers to get the next free slot to post the command. Return -ENOSPC in queue full case. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Tested-by: Jha, Chandan <Chandan.Jha@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-03crypto: cavium/nitrox - Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai1-1/+1
crypto_alloc_context() crypto_alloc_context() is only called by nitrox_skcipher_init(), which is never called in atomic context. crypto_alloc_context() calls dma_pool_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-22crypto: cavium - make structure algs staticColin Ian King1-1/+1
The structure algs is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/crypto/cavium/cpt/cptvf_algs.c:354:19: warning: symbol 'algs' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook1-1/+1
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-28crypto: cavium - Remove unnecessary parenthesesVarsha Rao1-21/+21
This patch fixes the clang warning of extraneous parentheses, with the following coccinelle script. @@ identifier i; constant c; expression e; @@ ( !((e)) | -(( \(i == c\|i != c\|i <= c\|i < c\|i >= c\|i > c\) -)) ) Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: cavium - Fix smp_processor_id() warningsJan Glauber2-3/+3
Switch to raw_smp_processor_id() to prevent a number of warnings from kernel debugging. We do not care about preemption here, as the CPU number is only used as a poor mans load balancing or device selection. If preemption happens during a compress/decompress operation a small performance hit will occur but everything will continue to work, so just ignore it. Signed-off-by: Jan Glauber <jglauber@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: cavium - Fix statistics pending request valueJan Glauber2-9/+5
The pending request counter was read from the wrong register. While at it, there is no need to use an atomic for it as it is only read localy in a loop. Signed-off-by: Jan Glauber <jglauber@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: cavium - Prevent division by zeroJan Glauber1-4/+5
Avoid two potential divisions by zero when calculating average values for the zip statistics. Signed-off-by: Jan Glauber <jglauber@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: cavium - Limit result reading attemptsJan Glauber3-4/+25
After issuing a request an endless loop was used to read the completion state from memory which is asynchronously updated by the ZIP coprocessor. Add an upper bound to the retry attempts to prevent a CPU getting stuck forever in case of an error. Additionally, add a read memory barrier and a small delay between the reading attempts. Signed-off-by: Jan Glauber <jglauber@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21crypto: cavium - Fix fallout from CONFIG_VMAP_STACKJan Glauber1-8/+14
Enabling virtual mapped kernel stacks breaks the thunderx_zip driver. On compression or decompression the executing CPU hangs in an endless loop. The reason for this is the usage of __pa by the driver which does no longer work for an address that is not part of the 1:1 mapping. The zip driver allocates a result struct on the stack and needs to tell the hardware the physical address within this struct that is used to signal the completion of the request. As the hardware gets the wrong address after the broken __pa conversion it writes to an arbitrary address. The zip driver then waits forever for the completion byte to contain a non-zero value. Allocating the result struct from 1:1 mapped memory resolves this bug. Signed-off-by: Jan Glauber <jglauber@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-23crypto: cavium - Replace mdelay with msleep in cpt_device_initJia-Ju Bai1-1/+1
cpt_device_init() is never called in atomic context. The call chain ending up at cpt_device_init() is: [1] cpt_device_init() <- cpt_probe() cpt_probe() is only set as ".probe" in pci_driver structure "cpt_pci_driver". Despite never getting called from atomic context, cpt_device_init() calls mdelay(100), i.e. busy wait for 100ms. That is not necessary and can be replaced with msleep to avoid busy waiting. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: drivers - remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-29crypto: cavium - fix memory leak on infoColin Ian King1-1/+2
The object info is being leaked on an error return path, fix this by setting ret to -ENOMEM and exiting via the request_cleanup path that will free info. Detected by CoverityScan, CID#1408439 ("Resource Leak") Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-03crypto: cavium - clean up clang warning on unread variable offsetColin Ian King1-1/+1
The variable offset is being assigned and not being used; it should be passed as the 2nd argument to call to function nitrox_write_csr but has been omitted. Fix this. Cleans up clang warning: Value stored to 'offset' is never read Fixes: 14fa93cdcd9b ("crypto: cavium - Add support for CNN55XX adapters.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman11-0/+11
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22crypto: cavium/nitrox - Fix an error handling path in 'nitrox_probe()'Christophe Jaillet1-1/+3
'err' is known to be 0 at this point. If 'kzalloc()' fails, returns -ENOMEM instead of 0 which means success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-22crypto: cavium - add release_firmware to all return caseCorentin LABBE1-4/+9
Two return case misses to call release_firmware() and so leak some memory. This patch create a fw_release label (and so a common error path) and use it on all return case. Detected by CoverityScan, CID#1416422 ("Resource Leak") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: cavium/nitrox - Change in firmware path.Srikanth Jampala1-1/+2
Moved the firmware to "cavium" subdirectory as suggested by Kyle McMartin. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-14Merge branch 'linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix new compiler warnings in cavium - set post-op IV properly in caam (this fixes chaining) - fix potential use-after-free in atmel in case of EBUSY - fix sleeping in softirq path in chcr - disable buggy sha1-avx2 driver (may overread and page fault) - fix use-after-free on signals in caam * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium - make several functions static crypto: chcr - Avoid algo allocation in softirq. crypto: caam - properly set IV after {en,de}crypt crypto: atmel - only treat EBUSY as transient if backlog crypto: af_alg - Avoid sock_graft call warning crypto: caam - fix signals handling crypto: sha1-ssse3 - Disable avx2
2017-07-12crypto: cavium - make several functions staticColin Ian King1-4/+4
The functions cvm_encrypt, cvm_decrypt, cvm_xts_setkey and cvm_enc_dec_init does not need to be in global scope, so make them static. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-05Cavium CNN55XX: fix broken default Kconfig entryLinus Torvalds1-1/+0
Every developer always thinks that _their_ code is so special and magical that it should be enabled by default. And most of them are completely and utterly wrong. That's definitely the case when you write a specialty driver for a very unsual "security processor". It does *not* get to mark itself as "default m". If you solve world hunger, and make a driver that cures people of cancer, by all means enable it by default. But afaik, the Cavium CNN55XX does neither. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-22crypto: cavium/nitrox - dma_mapping_error() returns boolDan Carpenter1-6/+9
We want to return negative error codes here, but we're accidentally propogating the "true" return from dma_mapping_error(). Fixes: 14fa93cdcd9b ("crypto: cavium - Add support for CNN55XX adapters.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-20crypto: cavium - fix spelling mistake "Revsion" -> "Revision"Colin Ian King1-1/+1
Trivial fix to spelling mistake in seq_printf message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: cavium - Add more algorithmsGeorge Cherian1-0/+81
Add more algorithm support for the driver. Add support for ecb(aes), cfb(aes) and ecb(des3_ede). Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: cavium - Remove the individual encrypt/decrypt function for each ↵George Cherian2-77/+83
algorithm Remove the individual encrypt/decrypt function for easch algorithm. This is in prepration of adding more crypto algorithms supported by hardware. While at that simplify create_ctx_hdr/create_input_list function interfaces. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: cavium - Downgrade the annoying misc interrupt print from dev_err to ↵George Cherian1-1/+1
dev_dbg Mailbox interrupt is common and it is not an error interrupt. So downgrade the print from dev_err to dev_dbg. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: cavium - Register the CNN55XX supported crypto algorithms.Srikanth Jampala5-1/+544
Register the Symmetric crypto algorithms supported by CNN55XX driver with crypto subsystem. The following Symmetric crypto algorithms are supported, - aes with cbc, ecb, cfb, xts, ctr and cts modes - des3_ede with cbc and ecb modes Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: cavium - Add debugfs support in CNN55XX driver.Srikanth Jampala3-0/+143
Add debugfs support in CNN55XX Physical Function driver. Provides hardware counters and firmware information. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: cavium - Add support for CNN55XX adapters.Srikanth Jampala11-0/+4000
Add Physical Function driver support for CNN55XX crypto adapters. CNN55XX adapters belongs to Cavium NITROX family series, which accelerate both Symmetric and Asymmetric crypto workloads. These adapters have crypto engines that need firmware to become operational. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24crypto: zip - add a cast for printing atomic64_t valuesArnd Bergmann1-20/+20
kernelci.org reports a build-time regression on linux-next, with a harmless warning in x86 allmodconfig: drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 7 has type 'long long int' [-Wformat=] drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 6 has type 'long long int' [-Wformat=] drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'long long int' [-Wformat=] The return type for atomic64_read() unfortunately differs between architectures, with some defining it as atomic_long_read() and others returning a 64-bit type explicitly. Fixing this in general would be nice, but also require changing other users of these functions, so the simpler workaround is to add a cast here that avoids the warnings on the default build. Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24crypto: zip - Memory corruption in zip_clear_stats()Dan Carpenter1-1/+1
There is a typo here. It should be "stats" instead of "state". The impact is that we clear 224 bytes instead of 80 and we zero out memory that we shouldn't. Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09crypto: zip - Add Compression/Decompression statisticsMahipal Challa4-0/+271
Add statistics for compression/decompression hardware offload under debugfs. Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com> Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09crypto: zip - Wire-up Compression / decompression HW offloadMahipal Challa9-58/+845
This contains changes for adding compression/decompression h/w offload functionality for both DEFLATE and LZS. Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com> Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09crypto: zip - Add ThunderX ZIP driver coreMahipal Challa11-0/+2797
Add a driver for the ZIP engine found on Cavium ThunderX SOCs. The ZIP engine supports hardware accelerated compression and decompression. It includes 2 independent ZIP cores and supports: - DEFLATE compression and decompression (RFC 1951) - LZS compression and decompression (RFC 2395 and ANSI X3.241-1994) - ADLER32 and CRC32 checksums for ZLIB (RFC 1950) and GZIP (RFC 1952) The ZIP engine is presented as a PCI device. It supports DMA and scatter-gather. Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com> Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27crypto: cavium - fix leak on curr if curr->head fails to be allocatedColin Ian King1-0/+1
The exit path when curr->head cannot be allocated fails to kfree the earlier allocated curr. Fix this by kfree'ing it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27crypto: cavium - Fix couple of static checker errorsGeorge Cherian2-3/+5
Fix the following smatch errors cptvf_reqmanager.c:333 do_post_process() warn: variable dereferenced before check 'cptvf' cptvf_main.c:825 cptvf_remove() error: we previously assumed 'cptvf' could be null Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-23crypto: cavium - switch to pci_alloc_irq_vectorsChristoph Hellwig2-141/+65
pci_enable_msix has been long deprecated, but this driver adds a new instance. Convert it to pci_alloc_irq_vectors and greatly simplify the code, and make sure the prope code properly unwinds. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-23crypto: cavium - switch to pci_alloc_irq_vectorsChristoph Hellwig2-53/+10
pci_enable_msix has been long deprecated, but this driver adds a new instance. Convert it to pci_alloc_irq_vectors and greatly simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-23crypto: cavium - remove dead MSI-X related defineChristoph Hellwig1-2/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 22:01:09 +0000