| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* pm-cpuidle:
cpuidle-haltpoll: Fix small typo
|
|
Fix a spelling typo in cpuidle-haltpoll.c.
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
* pm-core:
PM: runtime: Add pm_runtime_get_if_active()
* pm-sleep:
PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
PM / hibernate: Remove unnecessary compat ioctl overrides
PM: hibernate: fix docs for ioctls that return loff_t via pointer
PM: sleep: wakeup: Use built-in RCU list checking
PM: sleep: core: Use built-in RCU list checking
* pm-acpi:
ACPI: PM: s2idle: Refine active GPEs check
ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
* pm-domains:
cpuidle: psci: Split psci_dt_cpu_init_idle()
PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
|
|
* pm-cpuidle:
cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint
intel_idle: Update copyright notice, known limitations and version
intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16)
intel_idle: Clean up kerneldoc comments for multiple functions
intel_idle: Reorder declarations of static variables
intel_idle: Annotate init time data structures
intel_idle: Add __initdata annotations to init time variables
intel_idle: Relocate definitions of cpuidle callbacks
intel_idle: Clean up definitions of cpuidle callbacks
intel_idle: Simplify LAPIC timer reliability checks
|
|
To make the code a bit more readable, let's move the OSI specific
initialization out of the psci_dt_cpu_init_idle() and into a separate
function.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Before commit 1328edca4a14 ("cpuidle-haltpoll: Enable kvm guest polling
when dedicated physical CPUs are available") the cpuidle-haltpoll driver
could also be used in scenarios when the host does not advertise the
KVM_HINTS_REALTIME hint.
While the behavior introduced by the aforementioned commit makes sense as
the default there are cases where the old behavior is desired, for example,
when other kernel changes triggered by presence by this hint are unwanted,
for some workloads where the latency benefit from polling overweights the
loss from idle CPU capacity that otherwise would be available, or just when
running under older Qemu versions that lack this hint.
Let's provide a typical "force" module parameter that allows restoring the
old behavior.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LP2 suspending could be unavailable, for example if it is disabled in a
device-tree. CC6 cpuidle state won't work in that case.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra20/30/114/124 SoCs have common idling states, thus there is no much
point in having separate drivers for a similar hardware. This patch moves
Tegra114/124 arch/ drivers into the common driver without any functional
changes. The CC6 state is kept disabled on Tegra114/124 because the core
Tegra PM code needs some more work in order to support that state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus
share the same code paths, there is no point in having separate drivers
for a similar hardware. This patch merely moves functionality of the old
driver into the new, although the CC6 state is kept disabled for now since
old driver had a rudimentary support for this state (allowing to enter
into CC6 only when secondary CPUs are put offline), while new driver can
provide a full-featured support. The new feature will be enabled by
another patch.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Call cpu_latency_qos_limit() instead of pm_qos_request(), because the
latter is going to be dropped.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Notice that pm_qos_remove_notifier() is not used at all and the only
caller of pm_qos_add_notifier() is the cpuidle core, which only needs
the PM_QOS_CPU_DMA_LATENCY notifier to invoke wake_up_all_idle_cpus()
upon changes of the PM_QOS_CPU_DMA_LATENCY target value.
First, to ensure that wake_up_all_idle_cpus() will be called
whenever the PM_QOS_CPU_DMA_LATENCY target value changes, modify the
pm_qos_add/update/remove_request() family of functions to check if
the effective constraint for the PM_QOS_CPU_DMA_LATENCY has changed
and call wake_up_all_idle_cpus() directly in that case.
Next, drop the PM_QOS_CPU_DMA_LATENCY notifier from cpuidle as it is
not necessary any more.
Finally, drop both pm_qos_add_notifier() and pm_qos_remove_notifier(),
as they have no callers now, along with cpu_dma_lat_notifier which is
only used by them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
|
|
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.
* intel_idle+acpi:
Documentation: admin-guide: PM: Add intel_idle document
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
ACPI: processor: Export acpi_processor_evaluate_cst()
ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
ACPI: processor: Clean up acpi_processor_evaluate_cst()
ACPI: processor: Introduce acpi_processor_evaluate_cst()
ACPI: processor: Export function to claim _CST control
|
|
Fix cpuidle_find_deepest_state() kernel documentation to avoid
warnings when compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix kernel documentation comments to remove warnings when
compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix warnings that show up when compiling with W=1
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Some of cpuidle drivers for ARMv7 can be compile tested on this
architecture because they do not depend on mach-specific bits. Enable
compile testing for big.LITTLE, Kirkwood, Zynq, AT91, Exynos and mvebu
cpuidle drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix a simple bug in rotating array index.
Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpuidle_driver_ref() and cpuidle_driver_unref() functions are not
used and the refcnt field in struct cpuidle_driver operated by them
is not updated anywhere else (so it is permanently equal to 0), so
drop both of them along with refcnt.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When the hierarchical CPU topology layout is used in DT and the PSCI OSI
mode is supported by the PSCI FW, let's initialize a corresponding PM
domain topology by using genpd. This enables a CPU and a group of CPUs,
when attached to the topology, to be power-managed accordingly.
To trigger the attempt to initialize the genpd data structures let's use a
subsys_initcall, which should be early enough to allow CPUs, but also other
devices to be attached.
The initialization consists of parsing the PSCI OF node for the topology
and the "domain idle states" DT bindings. In case the idle states are
compatible with "domain-idle-state", the initialized genpd becomes
responsible of selecting an idle state for the PM domain, via assigning it
a genpd governor.
Note that, a successful initialization of the genpd data structures, is
followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode
in the PSCI FW. In case this fails, we fall back into a degraded mode
rather than bailing out and returning error codes.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
When the hierarchical CPU topology is used and when a CPU is put offline,
that CPU prevents its PM domain from being powered off, which is because
genpd observes the corresponding attached device as being active from a
runtime PM point of view. Furthermore, any potential master PM domains are
also prevented from being powered off.
To address this limitation, let's add add a new CPU hotplug state
(CPUHP_AP_CPU_PM_STARTING) and register up/down callbacks for it, which
allows us to deal with runtime PM accordingly.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
In case we have succeeded to attach a CPU to its PM domain, let's deploy
runtime PM support for the corresponding attached device, to allow the CPU
to be powered-managed accordingly.
The triggering point for when runtime PM reference counting should be done,
has been selected to the deepest idle state for the CPU. However, from the
hierarchical point view, there may be good reasons to do runtime PM
reference counting even on shallower idle states, but at this point this
isn't supported, mainly due to limitations set by the generic PM domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
The per CPU variable psci_power_state, contains an array of fixed values,
which reflects the corresponding arm,psci-suspend-param parsed from DT, for
each of the available CPU idle states.
This isn't sufficient when using the hierarchical CPU topology in DT, in
combination with having PSCI OS initiated (OSI) mode enabled. More
precisely, in OSI mode, Linux is responsible of telling the PSCI FW what
idle state the cluster (a group of CPUs) should enter, while in PSCI
Platform Coordinated (PC) mode, each CPU independently votes for an idle
state of the cluster.
For this reason, introduce a per CPU variable called domain_state and
implement two helper functions to read/write its value. Then let the
domain_state take precedence over the regular selected state, when entering
and idle state.
To avoid executing the above OSI specific code in the ->enter() callback,
while operating in the default PSCI Platform Coordinated mode, let's also
add a new enter-function and use it for OSI.
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
In order to enable a CPU to be power managed through its PM domain, let's
try to attach it by calling psci_dt_attach_cpu() during the cpuidle
initialization.
psci_dt_attach_cpu() returns a pointer to the attached struct device, which
later should be used for runtime PM, hence we need to store it somewhere.
Rather than adding yet another per CPU variable, let's create a per CPU
struct to collect the relevant per CPU variables.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a
CPU number as an in-parameter and tries to attach the CPU's struct device
to its corresponding PM domain.
Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to
specify "psci" as the "name" of the PM domain to attach to. Additionally,
let's also prepare the attached device to be power managed via runtime PM.
Note that, the implementation of the new helper function is in a new
separate c-file, which may seems a bit too much at this point. However,
subsequent changes that implements the remaining part of the PM domain
support for cpuidle-psci, helps to justify this split.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Iterating through the idle state nodes in DT, to find out the number of
states that needs to be allocated is unnecessary, as it has already been
done from dt_init_idle_driver(). Therefore, drop the iteration and use the
number we already have at hand.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Currently CPU's idle states are represented using the flattened model.
Let's add support for the hierarchical layout, via converting to use
of_get_cpu_state_node().
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Instead of allocating 'n-1' states in psci_power_state to manage 'n'
idle states which include "ARM WFI" state, it would be simpler to have
1:1 mapping between psci_power_state and cpuidle driver states.
ARM WFI state(i.e. idx == 0) is handled specially in the generic macro
CPU_PM_CPU_IDLE_ENTER_PARAM and hence state[-1] is not possible. However
for sake of code readability, it is better to have 1:1 mapping and not
use [idx - 1] to access psci_power_state corresponding to driver cpuidle
state for idx.
psci_power_state[0] is default initialised to 0 and is never accessed
while entering WFI state.
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
In certain situations it may be useful to prevent some idle states
from being used by default while allowing user space to enable them
later on.
For this purpose, introduce a new state flag, CPUIDLE_FLAG_OFF, to
mark idle states that should be disabled by default, make the core
set CPUIDLE_STATE_DISABLED_BY_USER for those states at the
initialization time and add a new state attribute in sysfs,
"default_status", to inform user space of the initial status of
the given idle state ("disabled" if CPUIDLE_FLAG_OFF is set for it,
"enabled" otherwise).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The data type of the target_residency_ns field in struct cpuidle_state
is u64, so it does not need to be cast into u64.
Get rid of the unnecessary type cast.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It turns out that cpuidle_driver_state_disabled() can be called
before registering the cpufreq driver on some platforms, which
was not expected when it was introduced and which leads to a NULL
pointer dereference when trying to walk the CPUs associated with
the given cpuidle driver.
Fix the problem by making cpuidle_driver_state_disabled() check if
the driver's mask of CPUs associated with it is present and to set
CPUIDLE_FLAG_UNUSABLE for the given idle state in the driver's states
list if that is not the case to cause __cpuidle_register_device() to
set CPUIDLE_STATE_DISABLED_BY_DRIVER for that state for all cpuidle
devices registered by it later.
Fixes: cbda56d5fefc ("cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device
structure") changed, by mistake, the target residency from the first
available sleep state to the last available sleep state (which should
be longer).
This might cause excessive polling.
Fixes: 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure")
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
End sentences in help text with a period (aka full stop).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After recent cpuidle updates the "disabled" field in struct
cpuidle_state is only used by two drivers (intel_idle and shmobile
cpuidle) for marking unusable idle states, but that may as well be
achieved with the help of a state flag, so define an "unusable" idle
state flag, CPUIDLE_FLAG_UNUSABLE, make the drivers in question use
it instead of the "disabled" field and make the core set
CPUIDLE_STATE_DISABLED_BY_DRIVER for the idle states with that flag
set.
After the above changes, the "disabled" field in struct cpuidle_state
is not used any more, so drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify cpuidle_use_deepest_state() to take an additional exit latency
limit argument to be passed to find_deepest_idle_state() and make
cpuidle_idle_call() pass dev->forced_idle_latency_limit_ns to it for
forced idle.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Rebase and rearrange code, subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In some cases it may be useful to specify an exit latency limit for
the idle state to be used during CPU idle time injection.
Instead of duplicating the information in struct cpuidle_device
or propagating the latency limit in the call stack, replace the
use_deepest_state field with forced_latency_limit_ns to represent
that limit, so that the deepest idle state with exit latency within
that limit is forced (i.e. no governors) when it is set.
A zero exit latency limit for forced idle means to use governors in
the usual way (analogous to use_deepest_state equal to "false" before
this change).
Additionally, add play_idle_precise() taking two arguments, the
duration of forced idle and the idle state exit latency limit, both
in nanoseconds, and redefine play_idle() as a wrapper around that
new function.
This change is preparatory, no functional impact is expected.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject, changelog, cpuidle_use_deepest_state() kerneldoc, whitespace ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 99e98d3fb100 ("cpuidle: Consolidate disabled state checks")
overlooked the fact that the imx6q and tegra20 cpuidle drivers use
the "disabled" field in struct cpuidle_state for quirks which trigger
after the initialization of cpuidle, so reading the initial value of
that field is not sufficient for those drivers.
In order to allow them to implement the quirks without using the
"disabled" field in struct cpuidle_state, introduce a new helper
function and modify them to use it.
Fixes: 99e98d3fb100 ("cpuidle: Consolidate disabled state checks")
Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are three places in teo_select() where a given amount of time
is compared with TICK_NSEC if tick_nohz_tick_stopped() returns true,
which is a bit of duplicated code.
Avoid that code duplication by defining a helper function to do the
check and using it in all of the places in question.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the current state with the maximum "early hits" metric in
teo_select() is also the one "matching" the expected idle duration,
it will be used as the candidate one for selection even if its
"misses" metric is greater than its "hits" metric, which is not
correct.
In that case, the candidate state should be shallower than the
current one and its "early hits" metric should be the maximum
among the idle states shallower than the current one.
To make that happen, modify teo_select() to save the index of
the state whose "early hits" metric is the maximum for the
range of states below the current one and go back to that state
if it turns out that the current one should be rejected.
Fixes: 159e48560f51 ("cpuidle: teo: Fix "early hits" handling for disabled idle states")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
One purpose of the computations in teo_update() is to determine
whether or not the (saved) time till the next timer event and the
measured idle duration fall into the same "bin", so avoid using
values that include the cpuidle overhead to obtain the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, the cpuidle subsystem uses microseconds as the unit of
time which (among other things) causes the idle loop to incur some
integer division overhead for no clear benefit.
In order to allow cpuidle to measure time in nanoseconds, add two
new fields, exit_latency_ns and target_residency_ns, to represent the
exit latency and target residency of an idle state in nanoseconds,
respectively, to struct cpuidle_state and initialize them with the
help of the corresponding values in microseconds provided by drivers.
Additionally, change cpuidle_governor_latency_req() to return the
idle state exit latency constraint in nanoseconds.
Also meeasure idle state residency (last_residency_ns in struct
cpuidle_device and time_ns in struct cpuidle_driver) in nanoseconds
and update the cpuidle core and governors accordingly.
However, the menu governor still computes typical intervals in
microseconds to avoid integer overflows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
|
|
There are two reasons why CPU idle states may be disabled: either
because the driver has disabled them or because they have been
disabled by user space via sysfs.
In the former case, the state's "disabled" flag is set once during
the initialization of the driver and it is never cleared later (it
is read-only effectively). In the latter case, the "disable" field
of the given state's cpuidle_state_usage struct is set and it may be
changed via sysfs. Thus checking whether or not an idle state has
been disabled involves reading these two flags every time.
In order to avoid the additional check of the state's "disabled" flag
(which is effectively read-only anyway), use the value of it at the
init time to set a (new) flag in the "disable" field of that state's
cpuidle_state_usage structure and use the sysfs interface to
manipulate another (new) flag in it. This way the state is disabled
whenever the "disable" field of its cpuidle_state_usage structure is
nonzero, whatever the reason, and it is the only place to look into
to check whether or not the state has been disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has
a driver different from drv already and, if so, return -EBUSY before
updating any cpuidle_drivers per-CPU pointers.
Fixes: 82467a5a885d ("cpuidle: simplify multiple driver support")
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
