summaryrefslogtreecommitdiffstats
path: root/drivers/cpuidle
AgeCommit message (Collapse)AuthorFilesLines
2020-04-10Merge branch 'pm-cpuidle'Rafael J. Wysocki1-2/+2
* pm-cpuidle: cpuidle-haltpoll: Fix small typo
2020-04-08cpuidle-haltpoll: Fix small typoYihao Wu1-2/+2
Fix a spelling typo in cpuidle-haltpoll.c. Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-03Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-0/+401
Pull ARM SoC updates from Arnd Bergmann: "The code changes are mostly for 32-bit platforms and include: - Lots of updates for the Nvidia Tegra platform, including cpuidle, pmc, and dt-binding changes - Microchip at91 power management updates for the recently added sam9x60 SoC - Treewide setup_irq deprecation by afzal mohammed - STMicroelectronics stm32 gains earlycon support - Renesas platforms with Cortex-A9 can now use the global timer - Some TI OMAP2+ platforms gain cpuidle support - Various cleanups for the i.MX6 and Orion platforms, as well as Kconfig files across all platforms" * tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits) ARM: qcom: Add support for IPQ40xx ARM: mmp: replace setup_irq() by request_irq() ARM: cns3xxx: replace setup_irq() by request_irq() ARM: spear: replace setup_irq() by request_irq() ARM: ep93xx: Replace setup_irq() by request_irq() ARM: iop32x: replace setup_irq() by request_irq() arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ...
2020-03-30Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'Rafael J. Wysocki1-19/+27
* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30Merge branch 'pm-cpuidle'Rafael J. Wysocki1-2/+10
* pm-cpuidle: cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint intel_idle: Update copyright notice, known limitations and version intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16) intel_idle: Clean up kerneldoc comments for multiple functions intel_idle: Reorder declarations of static variables intel_idle: Annotate init time data structures intel_idle: Add __initdata annotations to init time variables intel_idle: Relocate definitions of cpuidle callbacks intel_idle: Clean up definitions of cpuidle callbacks intel_idle: Simplify LAPIC timer reliability checks
2020-03-14cpuidle: psci: Split psci_dt_cpu_init_idle()Ulf Hansson1-19/+27
To make the code a bit more readable, let's move the OSI specific initialization out of the psci_dt_cpu_init_idle() and into a separate function. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14cpuidle: haltpoll: allow force loading on hosts without the REALTIME hintMaciej S. Szmigiero1-2/+10
Before commit 1328edca4a14 ("cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available") the cpuidle-haltpoll driver could also be used in scenarios when the host does not advertise the KVM_HINTS_REALTIME hint. While the behavior introduced by the aforementioned commit makes sense as the default there are cases where the old behavior is desired, for example, when other kernel changes triggered by presence by this hint are unwanted, for some workloads where the latency benefit from polling overweights the loss from idle CPU capacity that otherwise would be available, or just when running under older Qemu versions that lack this hint. Let's provide a typical "force" module parameter that allows restoring the old behavior. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-13cpuidle: tegra: Disable CC6 state if LP2 unavailableDmitry Osipenko1-0/+5
LP2 suspending could be unavailable, for example if it is disabled in a device-tree. CC6 cpuidle state won't work in that case. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: tegra: Squash Tegra114 driver into the common driverDmitry Osipenko1-1/+44
Tegra20/30/114/124 SoCs have common idling states, thus there is no much point in having separate drivers for a similar hardware. This patch moves Tegra114/124 arch/ drivers into the common driver without any functional changes. The CC6 state is kept disabled on Tegra114/124 because the core Tegra PM code needs some more work in order to support that state. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: tegra: Squash Tegra30 driver into the common driverDmitry Osipenko1-5/+69
Tegra20 and Terga30 SoCs have common C1 and CC6 idling states and thus share the same code paths, there is no point in having separate drivers for a similar hardware. This patch merely moves functionality of the old driver into the new, although the CC6 state is kept disabled for now since old driver had a rudimentary support for this state (allowing to enter into CC6 only when secondary CPUs are put offline), while new driver can provide a full-featured support. The new feature will be enabled by another patch. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidleDmitry Osipenko3-0/+289
The driver's code is refactored in a way that will make it easy to support Tegra30/114/124 SoCs by this unified driver later on. The current functionality is equal to the old Tegra20 driver, only the code's structure changed a tad. This is also a proper platform driver now. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-02-13cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request()Rafael J. Wysocki1-1/+1
Call cpu_latency_qos_limit() instead of pm_qos_request(), because the latter is going to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2020-02-13PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY notifier chainRafael J. Wysocki1-39/+1
Notice that pm_qos_remove_notifier() is not used at all and the only caller of pm_qos_add_notifier() is the cpuidle core, which only needs the PM_QOS_CPU_DMA_LATENCY notifier to invoke wake_up_all_idle_cpus() upon changes of the PM_QOS_CPU_DMA_LATENCY target value. First, to ensure that wake_up_all_idle_cpus() will be called whenever the PM_QOS_CPU_DMA_LATENCY target value changes, modify the pm_qos_add/update/remove_request() family of functions to check if the effective constraint for the PM_QOS_CPU_DMA_LATENCY has changed and call wake_up_all_idle_cpus() directly in that case. Next, drop the PM_QOS_CPU_DMA_LATENCY notifier from cpuidle as it is not necessary any more. Finally, drop both pm_qos_add_notifier() and pm_qos_remove_notifier(), as they have no callers now, along with cpu_dma_lat_notifier which is only used by them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds5-29/+466
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-23Merge branch 'intel_idle+acpi'Rafael J. Wysocki2-1/+15
Merge changes updating the ACPI processor driver in order to export acpi_processor_evaluate_cst() to the code outside of it and adding ACPI support to the intel_idle driver based on that. * intel_idle+acpi: Documentation: admin-guide: PM: Add intel_idle document intel_idle: Use ACPI _CST on server systems intel_idle: Add module parameter to prevent ACPI _CST from being used intel_idle: Allow ACPI _CST to be used for selected known processors cpuidle: Allow idle states to be disabled by default intel_idle: Use ACPI _CST for processor models without C-state tables intel_idle: Refactor intel_idle_cpuidle_driver_init() ACPI: processor: Export acpi_processor_evaluate_cst() ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR ACPI: processor: Clean up acpi_processor_evaluate_cst() ACPI: processor: Introduce acpi_processor_evaluate_cst() ACPI: processor: Export function to claim _CST control
2020-01-23cpuidle: fix cpuidle_find_deepest_state() kerneldoc warningsBenjamin Gaignard1-0/+3
Fix cpuidle_find_deepest_state() kernel documentation to avoid warnings when compiling with W=1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-23cpuidle: sysfs: fix warnings when compiling with W=1Benjamin Gaignard1-2/+4
Fix kernel documentation comments to remove warnings when compiling with W=1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-23cpuidle: coupled: fix warnings when compiling with W=1Benjamin Gaignard1-4/+5
Fix warnings that show up when compiling with W=1 Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-17Merge back cpuidle material for v5.6.Rafael J. Wysocki4-60/+8
2020-01-14cpuidle: arm: Enable compile testing for some of driversKrzysztof Kozlowski1-6/+6
Some of cpuidle drivers for ARMv7 can be compile tested on this architecture because they do not depend on mach-specific bits. Enable compile testing for big.LITTLE, Kirkwood, Zynq, AT91, Exynos and mvebu cpuidle drivers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13cpuidle: teo: Fix intervals[] array indexing bugIkjoon Jang1-1/+1
Fix a simple bug in rotating array index. Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-09cpuidle: Drop unused cpuidle_driver_ref/unref() functionsRafael J. Wysocki1-46/+0
The cpuidle_driver_ref() and cpuidle_driver_unref() functions are not used and the refcnt field in struct cpuidle_driver operated by them is not updated anywhere else (so it is permanently equal to 0), so drop both of them along with refcnt. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2020-01-02cpuidle: psci: Add support for PM domains by using genpdUlf Hansson3-2/+284
When the hierarchical CPU topology layout is used in DT and the PSCI OSI mode is supported by the PSCI FW, let's initialize a corresponding PM domain topology by using genpd. This enables a CPU and a group of CPUs, when attached to the topology, to be power-managed accordingly. To trigger the attempt to initialize the genpd data structures let's use a subsys_initcall, which should be early enough to allow CPUs, but also other devices to be attached. The initialization consists of parsing the PSCI OF node for the topology and the "domain idle states" DT bindings. In case the idle states are compatible with "domain-idle-state", the initialized genpd becomes responsible of selecting an idle state for the PM domain, via assigning it a genpd governor. Note that, a successful initialization of the genpd data structures, is followed by a call to psci_set_osi_mode(), as to try to enable the OSI mode in the PSCI FW. In case this fails, we fall back into a degraded mode rather than bailing out and returning error codes. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Support CPU hotplug for the hierarchical modelUlf Hansson1-1/+44
When the hierarchical CPU topology is used and when a CPU is put offline, that CPU prevents its PM domain from being powered off, which is because genpd observes the corresponding attached device as being active from a runtime PM point of view. Furthermore, any potential master PM domains are also prevented from being powered off. To address this limitation, let's add add a new CPU hotplug state (CPUHP_AP_CPU_PM_STARTING) and register up/down callbacks for it, which allows us to deal with runtime PM accordingly. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Manage runtime PM in the idle pathUlf Hansson1-1/+9
In case we have succeeded to attach a CPU to its PM domain, let's deploy runtime PM support for the corresponding attached device, to allow the CPU to be powered-managed accordingly. The triggering point for when runtime PM reference counting should be done, has been selected to the deepest idle state for the CPU. However, from the hierarchical point view, there may be good reasons to do runtime PM reference counting even on shallower idle states, but at this point this isn't supported, mainly due to limitations set by the generic PM domain. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Prepare to use OS initiated suspend mode via PM domainsUlf Hansson1-6/+50
The per CPU variable psci_power_state, contains an array of fixed values, which reflects the corresponding arm,psci-suspend-param parsed from DT, for each of the available CPU idle states. This isn't sufficient when using the hierarchical CPU topology in DT, in combination with having PSCI OS initiated (OSI) mode enabled. More precisely, in OSI mode, Linux is responsible of telling the PSCI FW what idle state the cluster (a group of CPUs) should enter, while in PSCI Platform Coordinated (PC) mode, each CPU independently votes for an idle state of the cluster. For this reason, introduce a per CPU variable called domain_state and implement two helper functions to read/write its value. Then let the domain_state take precedence over the regular selected state, when entering and idle state. To avoid executing the above OSI specific code in the ->enter() callback, while operating in the default PSCI Platform Coordinated mode, let's also add a new enter-function and use it for OSI. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Attach CPU devices to their PM domainsUlf Hansson1-4/+20
In order to enable a CPU to be power managed through its PM domain, let's try to attach it by calling psci_dt_attach_cpu() during the cpuidle initialization. psci_dt_attach_cpu() returns a pointer to the attached struct device, which later should be used for runtime PM, hence we need to store it somewhere. Rather than adding yet another per CPU variable, let's create a per CPU struct to collect the relevant per CPU variables. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Add a helper to attach a CPU to its PM domainUlf Hansson3-1/+46
Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a CPU number as an in-parameter and tries to attach the CPU's struct device to its corresponding PM domain. Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to specify "psci" as the "name" of the PM domain to attach to. Additionally, let's also prepare the attached device to be power managed via runtime PM. Note that, the implementation of the new helper function is in a new separate c-file, which may seems a bit too much at this point. However, subsequent changes that implements the remaining part of the PM domain support for cpuidle-psci, helps to justify this split. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Support hierarchical CPU idle statesUlf Hansson1-2/+1
Currently CPU's idle states are represented using the flattened model. Let's add support for the hierarchical layout, via converting to use of_get_cpu_state_node(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Simplify OF parsing of CPU idle state nodesUlf Hansson1-18/+17
Iterating through the idle state nodes in DT, to find out the number of states that needs to be allocated is unnecessary, as it has already been done from dt_init_idle_driver(). Therefore, drop the iteration and use the number we already have at hand. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: dt: Support hierarchical CPU idle statesLina Iyer1-3/+2
Currently CPU's idle states are represented using the flattened model. Let's add support for the hierarchical layout, via converting to use of_get_cpu_state_node(). Suggested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2020-01-02cpuidle: psci: Align psci_power_state count with idle state countSudeep Holla1-3/+5
Instead of allocating 'n-1' states in psci_power_state to manage 'n' idle states which include "ARM WFI" state, it would be simpler to have 1:1 mapping between psci_power_state and cpuidle driver states. ARM WFI state(i.e. idx == 0) is handled specially in the generic macro CPU_PM_CPU_IDLE_ENTER_PARAM and hence state[-1] is not possible. However for sake of code readability, it is better to have 1:1 mapping and not use [idx - 1] to access psci_power_state corresponding to driver cpuidle state for idx. psci_power_state[0] is default initialised to 0 and is never accessed while entering WFI state. Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org>
2019-12-27cpuidle: Allow idle states to be disabled by defaultRafael J. Wysocki2-1/+15
In certain situations it may be useful to prevent some idle states from being used by default while allowing user space to enable them later on. For this purpose, introduce a new state flag, CPUIDLE_FLAG_OFF, to mark idle states that should be disabled by default, make the core set CPUIDLE_STATE_DISABLED_BY_USER for those states at the initialization time and add a new state attribute in sysfs, "default_status", to inform user space of the initial status of the given idle state ("disabled" if CPUIDLE_FLAG_OFF is set for it, "enabled" otherwise). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20cpuidle: kirkwood: convert to devm_platform_ioremap_resource()Yangtao Li1-4/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-20cpuidle: clps711x: convert to devm_platform_ioremap_resource()Yangtao Li1-4/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-12cpuidle: Drop unnecessary type cast in cpuidle_poll_time()Rafael J. Wysocki1-1/+1
The data type of the target_residency_ns field in struct cpuidle_state is u64, so it does not need to be cast into u64. Get rid of the unnecessary type cast. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-10cpuidle: Fix cpuidle_driver_state_disabled()Rafael J. Wysocki1-0/+10
It turns out that cpuidle_driver_state_disabled() can be called before registering the cpufreq driver on some platforms, which was not expected when it was introduced and which leads to a NULL pointer dereference when trying to walk the CPUs associated with the given cpuidle driver. Fix the problem by making cpuidle_driver_state_disabled() check if the driver's mask of CPUs associated with it is present and to set CPUIDLE_FLAG_UNUSABLE for the given idle state in the driver's states list if that is not the case to cause __cpuidle_register_device() to set CPUIDLE_STATE_DISABLED_BY_DRIVER for that state for all cpuidle devices registered by it later. Fixes: cbda56d5fefc ("cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-09cpuidle: use first valid target residency as poll timeMarcelo Tosatti1-0/+1
Commit 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") changed, by mistake, the target residency from the first available sleep state to the last available sleep state (which should be longer). This might cause excessive polling. Fixes: 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29cpuidle: minor Kconfig help text fixesRandy Dunlap1-3/+3
End sentences in help text with a period (aka full stop). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29cpuidle: Drop disabled field from struct cpuidle_stateRafael J. Wysocki2-2/+1
After recent cpuidle updates the "disabled" field in struct cpuidle_state is only used by two drivers (intel_idle and shmobile cpuidle) for marking unusable idle states, but that may as well be achieved with the help of a state flag, so define an "unusable" idle state flag, CPUIDLE_FLAG_UNUSABLE, make the drivers in question use it instead of the "disabled" field and make the core set CPUIDLE_STATE_DISABLED_BY_DRIVER for the idle states with that flag set. After the above changes, the "disabled" field in struct cpuidle_state is not used any more, so drop it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-29cpuidle: Fix Kconfig indentationKrzysztof Kozlowski2-16/+16
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()Daniel Lezcano1-2/+3
Modify cpuidle_use_deepest_state() to take an additional exit latency limit argument to be passed to find_deepest_idle_state() and make cpuidle_idle_call() pass dev->forced_idle_latency_limit_ns to it for forced idle. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: Rebase and rearrange code, subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20cpuidle: Allow idle injection to apply exit latency limitDaniel Lezcano1-6/+7
In some cases it may be useful to specify an exit latency limit for the idle state to be used during CPU idle time injection. Instead of duplicating the information in struct cpuidle_device or propagating the latency limit in the call stack, replace the use_deepest_state field with forced_latency_limit_ns to represent that limit, so that the deepest idle state with exit latency within that limit is forced (i.e. no governors) when it is set. A zero exit latency limit for forced idle means to use governors in the usual way (analogous to use_deepest_state equal to "false" before this change). Additionally, add play_idle_precise() taking two arguments, the duration of forced idle and the idle state exit latency limit, both in nanoseconds, and redefine play_idle() as a wrapper around that new function. This change is preparatory, no functional impact is expected. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: Subject, changelog, cpuidle_use_deepest_state() kerneldoc, whitespace ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-19cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirksRafael J. Wysocki1-0/+28
Commit 99e98d3fb100 ("cpuidle: Consolidate disabled state checks") overlooked the fact that the imx6q and tegra20 cpuidle drivers use the "disabled" field in struct cpuidle_state for quirks which trigger after the initialization of cpuidle, so reading the initial value of that field is not sufficient for those drivers. In order to allow them to implement the quirks without using the "disabled" field in struct cpuidle_state, introduce a new helper function and modify them to use it. Fixes: 99e98d3fb100 ("cpuidle: Consolidate disabled state checks") Reported-by: Len Brown <lenb@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-15cpuidle: teo: Avoid code duplication in conditionalsRafael J. Wysocki1-5/+8
There are three places in teo_select() where a given amount of time is compared with TICK_NSEC if tick_nohz_tick_stopped() returns true, which is a bit of duplicated code. Avoid that code duplication by defining a helper function to do the check and using it in all of the places in question. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13cpuidle: teo: Avoid using "early hits" incorrectlyRafael J. Wysocki1-4/+17
If the current state with the maximum "early hits" metric in teo_select() is also the one "matching" the expected idle duration, it will be used as the candidate one for selection even if its "misses" metric is greater than its "hits" metric, which is not correct. In that case, the candidate state should be shallower than the current one and its "early hits" metric should be the maximum among the idle states shallower than the current one. To make that happen, modify teo_select() to save the index of the state whose "early hits" metric is the maximum for the range of states below the current one and go back to that state if it turns out that the current one should be rejected. Fixes: 159e48560f51 ("cpuidle: teo: Fix "early hits" handling for disabled idle states") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-13cpuidle: teo: Exclude cpuidle overhead from computationsRafael J. Wysocki1-1/+8
One purpose of the computations in teo_update() is to determine whether or not the (saved) time till the next timer event and the measured idle duration fall into the same "bin", so avoid using values that include the cpuidle overhead to obtain the latter. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-11cpuidle: Use nanoseconds as the unit of timeRafael J. Wysocki9-157/+168
Currently, the cpuidle subsystem uses microseconds as the unit of time which (among other things) causes the idle loop to incur some integer division overhead for no clear benefit. In order to allow cpuidle to measure time in nanoseconds, add two new fields, exit_latency_ns and target_residency_ns, to represent the exit latency and target residency of an idle state in nanoseconds, respectively, to struct cpuidle_state and initialize them with the help of the corresponding values in microseconds provided by drivers. Additionally, change cpuidle_governor_latency_req() to return the idle state exit latency constraint in nanoseconds. Also meeasure idle state residency (last_residency_ns in struct cpuidle_device and time_ns in struct cpuidle_driver) in nanoseconds and update the cpuidle core and governors accordingly. However, the menu governor still computes typical intervals in microseconds to avoid integer overflows. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Doug Smythies <dsmythies@telus.net> Tested-by: Doug Smythies <dsmythies@telus.net>
2019-11-06cpuidle: Consolidate disabled state checksRafael J. Wysocki6-48/+51
There are two reasons why CPU idle states may be disabled: either because the driver has disabled them or because they have been disabled by user space via sysfs. In the former case, the state's "disabled" flag is set once during the initialization of the driver and it is never cleared later (it is read-only effectively). In the latter case, the "disable" field of the given state's cpuidle_state_usage struct is set and it may be changed via sysfs. Thus checking whether or not an idle state has been disabled involves reading these two flags every time. In order to avoid the additional check of the state's "disabled" flag (which is effectively read-only anyway), use the value of it at the init time to set a (new) flag in the "disable" field of that state's cpuidle_state_usage structure and use the sysfs interface to manipulate another (new) flag in it. This way the state is disabled whenever the "disable" field of its cpuidle_state_usage structure is nonzero, whatever the reason, and it is the only place to look into to check whether or not the state has been disabled. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-10-24cpuidle: Do not unset the driver if it is there alreadyZhenzhong Duan1-8/+7
Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has a driver different from drv already and, if so, return -EBUSY before updating any cpuidle_drivers per-CPU pointers. Fixes: 82467a5a885d ("cpuidle: simplify multiple driver support") Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>