summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2018-05-14cpufreq: armada-37xx: driver relies on cpufreq-dtMiquel Raynal1-1/+1
Armada-37xx driver registers a cpufreq-dt driver. Not having CONFIG_CPUFREQ_DT selected leads to a silent abort during the probe. Prevent that situation by having the former depending on the latter. Fixes: 92ce45fb875d7 (cpufreq: Add DVFS support for Armada 37xx) Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-30cpufreq / CPPC: Set platform specific transition_delay_usPrashanth Prakash1-2/+44
Add support to specify platform specific transition_delay_us instead of using the transition delay derived from PCC. With commit 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) we are setting transition_delay_us directly and not applying the LATENCY_MULTIPLIER. Because of that, on Qualcomm Centriq we can end up with a very high rate of frequency change requests when using the schedutil governor (default rate_limit_us=10 compared to an earlier value of 10000). The PCC subspace describes the rate at which the platform can accept commands on the CPPC's PCC channel. This includes read and write command on the PCC channel that can be used for reasons other than frequency transitions. Moreover the same PCC subspace can be used by multiple freq domains and deriving transition_delay_us from it as we do now can be sub-optimal. Moreover if a platform does not use PCC for desired_perf register then there is no way to compute the transition latency or the delay_us. CPPC does not have a standard defined mechanism to get the transition rate or the latency at the moment. Given the above limitations, it is simpler to have a platform specific transition_delay_us and rely on PCC derived value only if a platform specific value is not available. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Fixes: 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-28Merge tag 'powerpc-4.17-4' of ↵Linus Torvalds1-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bunch of fixes, mostly for existing code and going to stable. Our memory hot-unplug path wasn't flushing the cache before removing memory. That is a problem now that we are doing memory hotplug on bare metal. Three fixes for the NPU code that supports devices connected via NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to avoid soft lockups for large flushes. A fix for our memory error handling where we would loop infinitely, returning back to the bad access and hard lockup the CPU. Fixes for the OPAL RTC driver, which wasn't handling some error cases correctly. A fix for a hardlockup in the powernv cpufreq driver. And finally two fixes to our smp_send_stop(), required due to a recent change to use it on shutdown. Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri G Bhat" * tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm/booke: Fix altivec related build break powerpc: Fix deadlock with multiple calls to smp_send_stop cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt powerpc: Fix smp_send_stop NMI IPI handling rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops powerpc/mce: Fix a bug where mce loops on memory UE. powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy powerpc/powernv/memtrace: Let the arch hotunplug code flush cache powerpc/mm: Flush cache on memory hot(un)plug
2018-04-27cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interruptShilpasri G Bhat1-3/+11
gpstate_timer_handler() uses synchronous smp_call to set the pstate on the requested core. This causes the below hard lockup: smp_call_function_single+0x110/0x180 (unreliable) smp_call_function_any+0x180/0x250 gpstate_timer_handler+0x1e8/0x580 call_timer_fn+0x50/0x1c0 expire_timers+0x138/0x1f0 run_timer_softirq+0x1e8/0x270 __do_softirq+0x158/0x3e4 irq_exit+0xe8/0x120 timer_interrupt+0x9c/0xe0 decrementer_common+0x114/0x120 -- interrupt: 901 at doorbell_global_ipi+0x34/0x50 LR = arch_send_call_function_ipi_mask+0x120/0x130 arch_send_call_function_ipi_mask+0x4c/0x130 smp_call_function_many+0x340/0x450 pmdp_invalidate+0x98/0xe0 change_huge_pmd+0xe0/0x270 change_protection_range+0xb88/0xe40 mprotect_fixup+0x140/0x340 SyS_mprotect+0x1b4/0x350 system_call+0x58/0x6c One way to avoid this is removing the smp-call. We can ensure that the timer always runs on one of the policy-cpus. If the timer gets migrated to a cpu outside the policy then re-queue it back on the policy->cpus. This way we can get rid of the smp-call which was being used to set the pstate on the policy->cpus. Fixes: 7bc54b652f13 ("timers, cpufreq/powernv: Initialize the gpstate timer as pinned") Cc: stable@vger.kernel.org # v4.8+ Reported-by: Nicholas Piggin <npiggin@gmail.com> Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24cpufreq: brcmstb-avs-cpufreq: remove development debug supportMarkus Mayer2-332/+1
This debug code was helpful while developing the driver, but it isn't being used for anything anymore. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: Drop cpufreq_table_validate_and_show()Viresh Kumar1-14/+0
This isn't used anymore. Remove the helper and update documentation accordingly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: SCMI: Don't validate the frequency table twiceViresh Kumar1-9/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from SCMI driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: CPPC: Initialize shared perf capabilities of CPUsShunyong Yang1-2/+12
When multiple CPUs are related in one cpufreq policy, the first online CPU will be chosen by default to handle cpufreq operations. Let's take cpu0 and cpu1 as an example. When cpu0 is offline, policy->cpu will be shifted to cpu1. cpu1's perf capabilities should be initialized. Otherwise, perf capabilities are 0s and speed change can not take effect. This patch copies perf capabilities of the first online CPU to other shared CPUs when policy shared type is CPUFREQ_SHARED_TYPE_ANY. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: armada-37xx: Fix clock leakGregory CLEMENT1-0/+2
There was no clk_put() balancing the clk_get(). This commit fixes it. Fixes: 92ce45fb875d (cpufreq: Add DVFS support for Armada 37xx) Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: CPPC: Don't set transition_latencyViresh Kumar1-1/+0
Now that the driver has started to set transition_delay_us directly, there is no need to set transition_latency along with it, as it is not used by the cpufreq core. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: ti-cpufreq: Use builtin_platform_driver()Viresh Kumar1-1/+1
This driver can not be built as a module and there is no need of the platform driver unregister part. Use builtin_platform_driver() instead of module_platform_driver(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10cpufreq: intel_pstate: Do not include debugfs.hRafael J. Wysocki1-1/+0
The intel_pstate driver doesn't use debugfs any more, so drop linux/debugfs.h from the list of included headers in it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-04-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+277
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
2018-04-03Merge tag 'pm-4.17-rc1' of ↵Linus Torvalds34-168/+123
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ...
2018-03-30cpufreq: CPPC: Use transition_delay_us depending transition_latencyGeorge Cherian1-0/+3
With commit e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms) the cpufreq was not honouring the delay passed via ACPI (PCCT). Due to which on ARM based platforms using CPPC the cpufreq governor tries to change the frequency of CPUs faster than expected. This leads to continuous error messages like the following. " ACPI CPPC: PCC check channel failed. Status=0 " Earlier (without above commit) the default transition delay was taken form the value passed from PCCT. Use the same value provided by PCCT to set the transition_delay_us. Fixes: e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms) Signed-off-by: George Cherian <george.cherian@cavium.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-26cpufreq: remove cris specific driversArnd Bergmann3-187/+0
The cris architecture is getting removed, including the artpec3 and etraxfs SoCs, so these cpufreq drivers are now unused. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26cpufreq: remove blackfin driverArnd Bergmann2-218/+0
The blackfin architecture is getting removed, so this driver is now obsolete. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-20cpufreq: tegra186: Don't validate the frequency table twiceViresh Kumar1-1/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from tegra186 driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: speedstep: Don't validate the frequency table twiceViresh Kumar3-4/+8
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from speedstep driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: sparc: Don't validate the frequency table twiceViresh Kumar2-2/+4
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sparc driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: sh: Don't validate the frequency table twiceViresh Kumar1-10/+12
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sh-cpufreq driver. The driver though prints the min/max frequency values and the same is done from the ->ready() callback now to keep the behavior unchanged. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: sfi: Don't validate the frequency table twiceViresh Kumar1-1/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sfi driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: scpi: Don't validate the frequency table twiceViresh Kumar1-9/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from scpi driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: sc520: Don't validate the frequency table twiceViresh Kumar1-1/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from sc520 driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: s3c24xx: Don't validate the frequency table twiceViresh Kumar1-4/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from s3c24xx driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: qoirq: Don't validate the frequency table twiceViresh Kumar1-11/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from qoirq driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: pxa: Don't validate the frequency table twiceViresh Kumar2-3/+5
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from pxa driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: ppc_cbe: Don't validate the frequency table twiceViresh Kumar1-3/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from ppc_cbe driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: powernow: Don't validate the frequency table twiceViresh Kumar3-11/+5
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from powernow driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: p4-clockmod: Don't validate the frequency table twiceViresh Kumar1-1/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from p4-clockmod driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: mediatek: Don't validate the frequency table twiceViresh Kumar1-10/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from mediatek driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: longhaul: Don't validate the frequency table twiceViresh Kumar1-1/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from longhaul driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: ia64-acpi: Don't validate the frequency table twiceViresh Kumar1-6/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from ia64-acpi driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: elanfreq: Don't validate the frequency table twiceViresh Kumar1-1/+2
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from elanfreq driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: e_powersaver: Don't validate the frequency table twiceViresh Kumar1-7/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from e_powersaver driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: cpufreq-dt: Don't validate the frequency table twiceViresh Kumar1-7/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from cpufreq-dt driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: brcmstb: Don't validate the frequency table twiceViresh Kumar1-5/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from brcmstb driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: arm_big_little: Don't validate the frequency table twiceViresh Kumar1-8/+1
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from arm_big_little driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: ACPI: Don't validate the frequency table twiceViresh Kumar1-9/+11
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table in the acpi-cpufreq driver. The driver needs to crosscheck if the max frequency corresponds to the P-state 0 or not and the same is done from the ->ready() callback now. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: Don't validate cpufreq table from cpufreq_generic_init()Viresh Kumar1-8/+1
The cpufreq table is already validated by the cpufreq core and none of the users of cpufreq_generic_init() have any dependency on it to validate the table as well. Don't validate the cpufreq table anymore from cpufreq_generic_init(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: imx6q: Find max freq from frequency table itselfViresh Kumar1-3/+4
This is a preparatory commit to make policy->suspend_freq independent of validation of the cpufreq table, as a later commit would update cpufreq_generic_init() to not validate the cpufreq table any longer. The driver already assumes the order in which the frequency table is sorted and we can get the max frequency easily. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: scpi: Add thermal dependencyArnd Bergmann1-0/+1
A built-in scpi cpufreq driver cannot link against a modular thermal framework: drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_ready': scpi-cpufreq.c:(.text+0x4c): undefined reference to `of_cpufreq_cooling_register' drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_exit': scpi-cpufreq.c:(.text+0x9c): undefined reference to `cpufreq_cooling_unregister' This adds a Kconfig dependency that makes sure this configuration is not possible, while allowing all configurations that can work. Note that disabling CPU_THERMAL means we don't care about the THERMAL dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure pathChunyu Hu1-2/+7
Kmemleak reported the below leak. When cppc_cpufreq_init went into failure path, the cpu mask is not freed. After fix, this report is gone. And to avaoid potential NULL pointer reference, check the cpu value first. unreferenced object 0xffff800fd5ea4880 (size 128): comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s) hex dump (first 32 bytes): 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634 [<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60 [<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c [<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c [<ffff000008083828>] do_one_initcall+0xec/0x15c [<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4 [<ffff0000089099b0>] kernel_init+0x18/0x10c [<ffff000008084d50>] ret_from_fork+0x10/0x18 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Chunyu Hu <chuhu@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19cpufreq: powernv: Don't validate the frequency table twiceViresh Kumar1-8/+3
The cpufreq core is already validating the CPU frequency table after calling the ->init() callback of the cpufreq drivers and the drivers don't need to do the same anymore. Though they need to set the policy->freq_table field directly from the ->init() callback now. Stop validating the frequency table from powernv driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-13cpufreq: scmi: add thermal dependencyArnd Bergmann1-0/+1
A built-in scmi cpufreq driver cannot link against a modular thermal framework: drivers/cpufreq/scmi-cpufreq.o: In function `scmi_cpufreq_ready': scmi-cpufreq.c:(.text+0x40): undefined reference to `of_cpufreq_cooling_register' drivers/cpufreq/scmi-cpufreq.o: In function `scmi_cpufreq_exit': scmi-cpufreq.c:(.text+0x88): undefined reference to `cpufreq_cooling_unregister' This adds a Kconfig dependency that makes sure this configuration is not possible, while allowing all configurations that can work. Note that disabling CPU_THERMAL means we don't care about the THERMAL dependency. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07Merge tag 'scmi-updates-4.17' of ↵Arnd Bergmann3-0/+276
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers Pull "ARM SCMI support for v4.17" from Sudeep Holla: ARM System Control and Management Interface(SCMI)[1] is more flexible and easily extensible than any of the existing interfaces. Few existing as well as future ARM platforms provide micro-controllers to abstract various power and other system management tasks which have similar interfaces, both in terms of the functions that are provided by them, and in terms of how requests are communicated to them. There are quite a few protocols like ARM SCPI, TI SCI, QCOM RPM, Nvidia Tegra BPMP, and so on already. This specification is to standardize and avoid any further fragmentation in the design of such interface by various vendors. The current SCMI driver implementation is very basic and initial support. It lacks support for notifications, asynchronous/delayed response, perf/power statistics region and sensor register region. Mailbox is the only form of transport supported currently in the driver. SCMI supports interrupt based mailbox communication, where, on completion of the processing of a message, the caller receives an interrupt as well as polling for completion. SCMI is designed to minimize the dependency on the mailbox/transport hardware. So in terms of SCMI, each channel in the mailbox includes memory area, doorbell and completion interrupt. However the doorbell and completion interrupt is highly mailbox dependent which was bit of controversial as part of SCMI/mailbox discussions. Arnd and me discussed about the few aspects of SCMI and the mailbox framework: 1. Use of mailbox framework for doorbell type mailbox controller: - Such hardware may not require any data to be sent to signal the remote about the presence of a message. The channel will have in-built information on how to trigger the signal to the remote. There are few mailbox controller drivers which are purely doorbell based. e.g.QCOM IPC, STM, Tegra, ACPI PCC,..etc 2. Supporting other mailbox controller: - SCMI just needs a mechanism to signal the remote firmware. Such controller may need fixed message to be sent to trigger a doorbell. In such case we may need to get that data from DT and pass the same to the controller. It's not covered in the current DT binding, but can be extended as optional property in future. However handling notifications may be interesting on such mailbox, but again there is no way to interpret what the data field(remote message) means, it could be a bit mask or a number or don't-care. Arnd mentioned that he doesn't like the way the mailbox binding deals with doorbell-type hardware, but we do have quite a few precedent drivers already and changing the binding to add a data field would not make it any better, but could cause other problems. So he is happy with the status quo of SCMI implementation. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0056a/index.html * tag 'scmi-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: cpufreq: scmi: add support for fast frequency switching cpufreq: add support for CPU DVFS based on SCMI message protocol hwmon: add support for sensors exported via ARM SCMI hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration clk: add support for clocks provided by SCMI firmware: arm_scmi: add device power domain support using genpd firmware: arm_scmi: add per-protocol channels support using idr objects firmware: arm_scmi: refactor in preparation to support per-protocol channels firmware: arm_scmi: add option for polling based performance domain operations firmware: arm_scmi: add support for polling based SCMI transfers firmware: arm_scmi: probe and initialise all the supported protocols firmware: arm_scmi: add initial support for sensor protocol firmware: arm_scmi: add initial support for power protocol firmware: arm_scmi: add initial support for clock protocol firmware: arm_scmi: add initial support for performance protocol firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices firmware: arm_scmi: add common infrastructure and support for base protocol firmware: arm_scmi: add basic driver infrastructure for SCMI dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol dt-bindings: mailbox: add support for mailbox client shared memory
2018-03-05Merge cpufreq fixes from v4.16-rc4.Rafael J. Wysocki3-8/+22
2018-03-02Merge branch 'cpufreq-scpi'Rafael J. Wysocki2-7/+15
* cpufreq-scpi: cpufreq: scpi: Fix incorrect arm_big_little config dependency cpufreq: scpi: invoke frequency-invariance setter function
2018-02-28cpufreq: scmi: add support for fast frequency switchingSudeep Holla1-0/+18
The cpufreq core provides option for drivers to implement fast_switch callback which is invoked for frequency switching from interrupt context. This patch adds support for fast_switch callback in SCMI cpufreq driver by making use of polling based SCMI transfer. It also sets the flag fast_switch_possible. Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-02-28cpufreq: add support for CPU DVFS based on SCMI message protocolSudeep Holla3-0/+258
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control including CPU DVFS. SCMI Message Protocol is used to communicate with the SCP. This patch adds a cpufreq driver for such systems using SCMI interface to drive CPU DVFS. Cc: linux-pm@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 08:55:56 +0000