summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
AgeCommit message (Collapse)AuthorFilesLines
2019-02-19cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()Yangtao Li1-1/+1
This issue was detected with the help of Coccinelle. So change the order of function calls to fix it. Fixes: 1690d8bb91e37 (cpufreq: scpi/scmi: Fix freeing of dynamic OPPs) Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-11Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki3-14/+10
* pm-cpuidle: doc: trace: fix reference to cpuidle documentation file cpuidle / Documentation: Update cpuidle MAINTAINERS entry * pm-cpufreq: cpufreq: scmi: Fix frequency invariance in slow path cpufreq: check if policy is inactive early in __cpufreq_get() cpufreq: scpi/scmi: Fix freeing of dynamic OPPs cpufreq / Documentation: Update cpufreq MAINTAINERS entry * pm-sleep: PM: sleep: call devfreq suspend/resume
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret1-2/+2
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: 4.17+ <stable@vger.kernel.org> # v4.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-08cpufreq: check if policy is inactive early in __cpufreq_get()Sudeep Holla1-8/+4
cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-04cpufreq: scpi/scmi: Fix freeing of dynamic OPPsViresh Kumar2-4/+4
Since the commit 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()", dynamically created OPP aren't automatically removed anymore by dev_pm_opp_cpumask_remove_table(). This affects the scpi and scmi cpufreq drivers which no longer free OPPs on failures or on invocations of the policy->exit() callback. Create a generic OPP helper dev_pm_opp_remove_all_dynamic() which can be called from these drivers instead of dev_pm_opp_cpumask_remove_table(). In dev_pm_opp_remove_all_dynamic(), we need to make sure that the opp_list isn't getting accessed simultaneously from other parts of the OPP core while the helper is freeing dynamic OPPs, i.e. we can't drop the opp_table->lock while traversing through the OPP list. And to accomplish that, this patch also creates _opp_kref_release_unlocked() which can be called from this new helper with the opp_table lock already held. Cc: 4.20 <stable@vger.kernel.org> # v4.20 Reported-by: Valentin Schneider <valentin.schneider@arm.com> Fixes: 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()" Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-27Merge tag 'powerpc-4.21-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Mitigations for Spectre v2 on some Freescale (NXP) CPUs. - A large series adding support for pass-through of Nvidia V100 GPUs to guests on Power9. - Another large series to enable hardware assistance for TLB table walk on MPC8xx CPUs. - Some preparatory changes to our DMA code, to make way for further cleanups from Christoph. - Several fixes for our Transactional Memory handling discovered by fuzzing the signal return path. - Support for generating our system call table(s) from a text file like other architectures. - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE, user accesses of kernel addresses instead print a ratelimited and appropriately scary warning. - A cosmetic change to make our unhandled page fault messages more similar to other arches and also more compact and informative. - Freescale updates from Scott: "Highlights include elimination of legacy clock bindings use from dts files, an 83xx watchdog handler, fixes to old dts interrupt errors, and some minor cleanup." And many clean-ups, reworks and minor fixes etc. Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing" * tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits) Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask" powerpc/zImage: Also check for stdout-path powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y macintosh: Use of_node_name_{eq, prefix} for node name comparisons ide: Use of_node_name_eq for node name comparisons powerpc: Use of_node_name_eq for node name comparisons powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name powerpc/mm: Remove very old comment in hash-4k.h powerpc/pseries: Fix node leak in update_lmb_associativity_index() powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL powerpc/dts/fsl: Fix dtc-flagged interrupt errors clk: qoriq: add more compatibles strings powerpc/fsl: Use new clockgen binding powerpc/83xx: handle machine check caused by watchdog timer powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved" powerpc/fsl_pci: simplify fsl_pci_dma_set_mask arch/powerpc/fsl_rmu: Use dma_zalloc_coherent vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver vfio_pci: Allow regions to add own capabilities vfio_pci: Allow mapping extra regions ...
2018-12-26Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Introduce "Energy Aware Scheduling" - by Quentin Perret. This is a coherent topology description of CPUs in cooperation with the PM subsystem, with the goal to schedule more energy-efficiently on asymetric SMP platform - such as waking up tasks to the more energy-efficient CPUs first, as long as the system isn't oversubscribed. For details of the design, see: https://lore.kernel.org/lkml/20180724122521.22109-1-quentin.perret@arm.com/ - Misc cleanups and smaller enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) sched/fair: Select an energy-efficient CPU on task wake-up sched/fair: Introduce an energy estimation helper function sched/fair: Add over-utilization/tipping point indicator sched/fair: Clean-up update_sg_lb_stats parameters sched/toplogy: Introduce the 'sched_energy_present' static key sched/topology: Make Energy Aware Scheduling depend on schedutil sched/topology: Disable EAS on inappropriate platforms sched/topology: Add lowest CPU asymmetry sched_domain level pointer sched/topology: Reference the Energy Model of CPUs when available PM: Introduce an Energy Model management framework sched/cpufreq: Prepare schedutil for Energy Aware Scheduling sched/topology: Relocate arch_scale_cpu_capacity() to the internal header sched/core: Remove unnecessary unlikely() in push_*_task() sched/topology: Remove the ::smt_gain field from 'struct sched_domain' sched: Fix various typos in comments sched/core: Clean up the #ifdef block in add_nr_running() sched/fair: Make some variables static sched/core: Create task_has_idle_policy() helper sched/fair: Add lsub_positive() and use it consistently sched/fair: Mask UTIL_AVG_UNCHANGED usages ...
2018-12-26Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ...
2018-12-18cpufreq: qcom-hw: Add support for QCOM cpufreq HW driverTaniya Das3-0/+320
The CPUfreq HW present in some QCOM chipsets offloads the steps necessary for changing the frequency of CPUs. The driver implements the cpufreq driver interface for this hardware engine. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11sched/topology: Make Energy Aware Scheduling depend on schedutilQuentin Perret1-0/+1
Energy Aware Scheduling (EAS) is designed with the assumption that frequencies of CPUs follow their utilization value. When using a CPUFreq governor other than schedutil, the chances of this assumption being true are small, if any. When schedutil is being used, EAS' predictions are at least consistent with the frequency requests. Although those requests have no guarantees to be honored by the hardware, they should at least guide DVFS in the right direction and provide some hope in regards to the EAS model being accurate. To make sure EAS is only used in a sane configuration, create a strong dependency on schedutil being used. Since having sugov compiled-in does not provide that guarantee, make CPUFreq call a scheduler function on governor changes hence letting it rebuild the scheduling domains, check the governors of the online CPUs, and enable/disable EAS accordingly. Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: adharmap@codeaurora.org Cc: chris.redpath@arm.com Cc: currojerez@riseup.net Cc: dietmar.eggemann@arm.com Cc: edubezval@gmail.com Cc: gregkh@linuxfoundation.org Cc: javi.merino@kernel.org Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: pkondeti@codeaurora.org Cc: skannan@codeaurora.org Cc: smuckle@google.com Cc: srinivas.pandruvada@linux.intel.com Cc: thara.gopinath@linaro.org Cc: tkjos@google.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Cc: viresh.kumar@linaro.org Link: https://lkml.kernel.org/r/20181203095628.11858-9-quentin.perret@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-11cpufreq: nforce2: Remove meaningless returnYangtao Li1-3/+0
Delete a line of meaningless return and some useless blank lines. In a function whose return type is void, returning on the last line is not required. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11cpufreq: ia64: Remove unused header filesYangtao Li1-5/+0
seq_file.h does not need to be included, so remove it. Moreover deleted a line of meaningless return and some useless blank lines. In a function whose return type is void, returning on the last line is not required. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-04Merge branch 'for-mingo' of ↵Ingo Molnar2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-29cpufreq: imx6q: save one condition block for normal case of nvmem readAnson Huang1-2/+3
Put return value checks of calling imx6ul_opp_check_speed_grading() into one block to save one condition block for normal case. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-29cpufreq: imx6q: remove unused codeAnson Huang1-9/+3
In voltage scale down path, the return value is NOT used at all, remove them to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-29cpufreq: pmac64: add of_node_put()Yangtao Li1-0/+1
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. g5_neo2_cpufreq_init() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-29cpufreq: powernv: add of_node_put()Yangtao Li1-6/+11
The of_find_node_by_path() returns a node pointer with refcount incremented,but there is the lack of use of the of_node_put() when done.Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-29cpufreq: intel_pstate: Force HWP min perf before offlineSrinivas Pandruvada1-2/+26
Force HWP Request MAX = HWP Request MIN = HWP Capability MIN and EPP to 0xFF. In this way the performance limits on the offlined CPU will not influence performance limits on its sibling CPU, which is still online. If the sibling CPU is calling for higher performance, it will impact the max core performance. Here core performance will follow higher of the performance requests from each sibling. Reported-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-29cpufreq: s3c24xx: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-40/+6
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-27cpufreq/cpufreq_governor: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney1-1/+1
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-27cpufreq/intel_pstate: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney1-1/+1
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: <linux-pm@vger.kernel.org>
2018-11-26drivers/cpufreq: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32Christophe Leroy1-2/+2
Today, powerpc has three CONFIG labels which means exactly the same: - CONFIG_6xx - CONFIG_PPC_BOOK3S_32 - CONFIG_PPC_STD_MMU_32 By consistency with PPC64, CONFIG_PPC_BOOK3S_32 is the preferred one. Using a label with includes _PPC_ also makes it clearer that it is linked to powerpc. In preparation of the removal of CONFIG_6xx, this patch replaces it by CONFIG_PPC_BOOK3S_32 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-19cpufreq: ti-cpufreq: Only register platform_device when supportedDave Gerlach1-5/+21
Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force the driver to probe on any platforms where the driver is built in. However, this should only happen on platforms that actually can make use of the driver. There is already functionality in place to match the SoC compatible so let's factor this out into a separate call and make sure we find a match before creating the ti-cpufreq platform device. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-11-07cpufreq: imx6q: add return value check for voltage scaleAnson Huang1-1/+6
Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-25cpufreq: remove unused arm_big_little_dt driverSudeep Holla3-110/+0
Most of the ARM platforms used cpufreq-dt driver irrespective of whether it's big-little(HMP) or SMP system. This arm_big_little_dt is not used actively at all. So let's remove the driver, so that it need not be maintained. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-25cpufreq: drop ARM_BIG_LITTLE_CPUFREQ support for ARM64Sudeep Holla1-1/+1
ARM_BIG_LITTLE_CPUFREQ depends on topology_physical_package_id to get the cluster id which inturn provides the information on related cpus in the same performance domain. ARM64 core doesn't provide the cluster information as it's not architecturally defined. There are no users of this driver in ARM64 after the one and only user(SCPI) moved away. So let's ban the usage of this driver for ARM64. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-25cpufreq: intel_pstate: Fix compilation for !CONFIG_ACPIDominik Brodowski1-9/+11
While at it, add a few comments which config options #ifdef and #else statements refer to. Fixes: 86d333a8cc7f (cpufreq: intel_pstate: Add base_frequency attribute) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-23Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed based on the AMD Zen architecture, and are built and sold in China, for domestic datacenter use. The code is pretty close to AMD support, mostly with a few quirks and enumeration differences. (Pu Wen) - Enable CPUID support on Cyrix 6x86/6x86L processors" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/cpupower: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support ACPI: Add Hygon Dhyana support x86/xen: Add Hygon Dhyana support to Xen x86/kvm: Add Hygon Dhyana support to KVM x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/apic: Add Hygon Dhyana support x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/amd_nb: Check vendor in AMD-only functions x86/alternative: Init ideal_nops for Hygon Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu: Create Hygon Dhyana architecture support file x86/CPU: Change query logic so CPUID is enabled before testing x86/CPU: Use correct macros for Cyrix calls
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-18Merge branches 'pm-opp' and 'powercap'Rafael J. Wysocki2-22/+21
* pm-opp: PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added cpufreq: dt: Try freeing static OPPs only if we have added them OPP: Return error on error from dev_pm_opp_get_opp_count() OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table() OPP: Pass OPP table to _of_add_opp_table_v{1|2}() OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes OPP: Use a single mechanism to free the OPP table OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table() cpufreq: mvebu: Remove OPPs using dev_pm_opp_remove() OPP: Create separate kref for static OPPs list OPP: Don't take OPP table's kref for static OPPs OPP: Parse OPP table's DT properties from _of_init_opp_table() OPP: Pass index to _of_init_opp_table() OPP: Protect dev_list with opp_table lock OPP: Don't try to remove all OPP tables on failure OPP: Free OPP table properly on performance state irregularities * powercap: powercap: RAPL: Get rid of custom RAPL_CPU() macro
2018-10-17cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent()Christoph Hellwig1-1/+1
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-16cpufreq: conservative: Take limits changes into account properlyRafael J. Wysocki1-2/+4
If the policy limits change between invocations of cs_dbs_update(), the requested frequency value stored in dbs_info may not be updated and the function may use a stale value of it next time. Moreover, if idle periods are takem into account by cs_dbs_update(), the requested frequency value stored in dbs_info may be below the min policy limit, which is incorrect. To fix these problems, always update the requested frequency value in dbs_info along with the local copy of it when the previous requested frequency is beyond the policy limits and avoid decreasing the requested frequency below the min policy limit when taking idle periods into account. Fixes: abb6627910a1 (cpufreq: conservative: Fix next frequency selection) Fixes: 00bfe05889e9 (cpufreq: conservative: Decrease frequency faster for deferred updates) Reported-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-16cpufreq: intel_pstate: Add base_frequency attributeSrinivas Pandruvada1-0/+38
Expose base_frequency to user space via cpufreq sysfs when HWP is in use. This HWP base frequency is read from the ACPI _CPC object if present, or from the HWP Capabilities MSR otherwise. On the majority of the HWP platforms the _CPC object will point to the HWP Capabilities MSR using the "Functional Fixed Hardware" address space type. The address space type also can simply be ACPI_TYPE_INTEGER, however, in which case the platform firmware can set its value at the initialization time based on the system constraints. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ullAnson Huang1-17/+35
On i.MX6UL/i.MX6ULL, accessing OCOTP directly is wrong because the ocotp clock needs to be enabled first. Add support for reading OCOTP through the nvmem API, and keep the old method there to support old dtb. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08cpufreq: dt-platdev: allow RK3399 to have separate tunables per clusterDmitry Torokhov1-1/+4
RK3899 has one cluster with 4 small cores, and another one with 2 big cores, with cores in different clusters having different OPPs and thus needing separate set of tunables. Let's enable this via "have_governor_per_policy" platform data. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-08Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki1-15/+19
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp Pull more operating performance points (OPP) framework updates for 4.20 from Viresh Kumar: "That contains some important fixes reported recently." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added cpufreq: dt: Try freeing static OPPs only if we have added them OPP: Return error on error from dev_pm_opp_get_opp_count() OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table()
2018-10-04cpufreq: dt: Try freeing static OPPs only if we have added themViresh Kumar1-15/+19
We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore since the latest OPP core updates as that uses reference counting to free resources. There are cases where no static OPPs are added (using DT) for a platform and trying to remove the OPP table may end up decrementing refcount which is already zero and hence generating warnings. Lets track if we were able to add static OPPs or not and then only remove the table based on that. Some reshuffling of code is also done to do that. Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-03cpufreq / CPPC: Mark acpi_ids as usedNathan Chancellor1-1/+1
Clang warns: drivers/cpufreq/cppc_cpufreq.c:431:36: warning: variable 'cppc_acpi_ids' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct acpi_device_id cppc_acpi_ids[] = { ^ 1 warning generated. Mark the definition as used so that Clang understands we don't want this warning while not inhibiting Clang's dead code elimination from removing the unreferenced internal symbol when moving the data it contains to the globally available symbol via MODULE_DEVICE_TABLE. $ nm -S drivers/cpufreq/cppc_cpufreq.o | grep acpi | tail -1 0000000000000000 0000000000000040 R __mod_acpi__cppc_acpi_ids_device_table Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra1-2/+2
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-01Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki1-7/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp Pull operating performance points (OPP) material for 4.20 from Viresh Kumar. "This contains patches that fix several bugs in the OPP core and makes it more stable." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: Pass OPP table to _of_add_opp_table_v{1|2}() OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes OPP: Use a single mechanism to free the OPP table OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table() cpufreq: mvebu: Remove OPPs using dev_pm_opp_remove() OPP: Create separate kref for static OPPs list OPP: Don't take OPP table's kref for static OPPs OPP: Parse OPP table's DT properties from _of_init_opp_table() OPP: Pass index to _of_init_opp_table() OPP: Protect dev_list with opp_table lock OPP: Don't try to remove all OPP tables on failure OPP: Free OPP table properly on performance state irregularities
2018-09-30Merge back earlier cpufreq material for 4.20.Rafael J. Wysocki3-3/+4
2018-09-29cpufreq: qcom-kryo: Fix section annotationsNathan Chancellor1-2/+2
There is currently a warning when building the Kryo cpufreq driver into the kernel image: WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from the function qcom_cpufreq_kryo_probe() to the function .init.text:qcom_cpufreq_kryo_get_msm_id() The function qcom_cpufreq_kryo_probe() references the function __init qcom_cpufreq_kryo_get_msm_id(). This is often because qcom_cpufreq_kryo_probe lacks a __init annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong. Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id so that there is no more mismatch warning. Additionally, Nick noticed that the remove function was marked as '__init' when it should really be marked as '__exit'. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Fixes: 5ad7346b4ae2 (cpufreq: kryo: Add module remove and exit) Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-27cpufreq: Add Hygon Dhyana supportPu Wen2-2/+12
The Hygon Dhyana CPU supports ACPI P-States, and there is SMBus device (PCI device ID 0x790b) on the Hygon platform. Add Hygon Dhyana support to the cpufreq driver by using the code path of AMD family 17h. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: rjw@rjwysocki.net Cc: viresh.kumar@linaro.org Cc: bp@alien8.de Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Cc: rafael@kernel.org Cc: linux-pm@vger.kernel.org Link: https://lkml.kernel.org/r/4db6f0f8537a93c172430c446a0297a6ab1c3c2d.1537533369.git.puwen@hygon.cn
2018-09-19cpufreq: mvebu: Remove OPPs using dev_pm_opp_remove()Viresh Kumar1-7/+2
dev_pm_opp_cpumask_remove_table() is going to change in the next commit and will not remove dynamic OPPs automatically. They must be removed with a call to dev_pm_opp_remove(). Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-09-17cpufreq: dt: Add support for r8a7744Biju Das1-0/+1
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1N (R8A7744) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-10cpufreq: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-10cpufreq: remove unnecessary unlikely()Igor Stoppa1-1/+1
WARN_ON() already contains an unlikely(), so it's not necessary to wrap it into another. Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-467/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-22Merge tag 'pm-4.19-rc1-2' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix the main idle loop and the menu cpuidle governor, clean up the latter, fix a mistake in the PCI bus type's support for system suspend and resume, fix the ondemand and conservative cpufreq governors, address a build issue in the system wakeup framework and make the ACPI C-states desciptions less confusing. Specifics: - Make the idle loop handle stopped scheduler tick correctly (Rafael Wysocki). - Prevent the menu cpuidle governor from letting CPUs spend too much time in shallow idle states when it is invoked with scheduler tick stopped and clean it up somewhat (Rafael Wysocki). - Avoid invoking the platform firmware to make the platform enter the ACPI S3 sleep state with suspended PCIe root ports which may confuse the firmware and cause it to crash (Rafael Wysocki). - Fix sysfs-related race in the ondemand and conservative cpufreq governors which may cause the system to crash if the governor module is removed during an update of CPU frequency limits (Henry Willard). - Select SRCU when building the system wakeup framework to avoid a build issue in it (zhangyi). - Make the descriptions of ACPI C-states vendor-neutral to avoid confusion (Prarit Bhargava)" * tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Handle stopped tick more aggressively sched: idle: Avoid retaining the tick when it has been stopped PCI / ACPI / PM: Resume all bridges on suspend-to-RAM cpuidle: menu: Update stale polling override comment cpufreq: governor: Avoid accessing invalid governor_data x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral cpuidle: menu: Fix white space PM / sleep: wakeup: Fix build error caused by missing SRCU support
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...