summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/powernow-k6.c
AgeCommit message (Collapse)AuthorFilesLines
2016-04-09cpufreq: Use consistent prefixing via pr_fmtJoe Perches1-7/+8
Use the more common kernel style adding a define for pr_fmt. Miscellanea: o Remove now unused PFX defines Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09cpufreq: Convert printk(KERN_<LEVEL> to pr_<level>Joe Perches1-6/+7
Use the more common logging style. Miscellanea: o Coalesce formats o Realign arguments o Add a missing space between a coalesced format Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19Update/Remove soon-to-be-dead email addressDave Jones1-1/+1
I'm leaving Red Hat at the end of December 2014, so remove all references to my soon-to-be-dead address. (There are some references left in the tree, that need additional changes, I'll send those through the AGP maintainers). Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-21powernow-k6: support 350MHz CPUMikulas Patocka1-0/+1
There exists 350MHz K6-2E+ CPU, so add it to the usual frequency table. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-01Merge branch 'cpufreq-macros' into pm-cpufreqRafael J. Wysocki1-7/+7
2014-04-30cpufreq: Use cpufreq_for_each_* macros for frequency table iterationStratos Karafotis1-7/+7
The cpufreq core now supports the cpufreq_for_each_entry and cpufreq_for_each_valid_entry macros helpers for iteration over the cpufreq_frequency_table, so use them. It should have no functional changes. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-29cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/endSrivatsa S. Bhat1-9/+11
During frequency transitions, the cpufreq core takes the responsibility of invoking cpufreq_freq_transition_begin() and cpufreq_freq_transition_end() for those cpufreq drivers that define the ->target_index callback but don't set the ASYNC_NOTIFICATION flag. The powernow-k6 cpufreq driver falls under this category, but this driver was invoking the _begin() and _end() APIs itself around frequency transitions, which led to double invocation of the _begin() API. The _begin API makes contending callers wait until the previous invocation is complete. Hence, the powernow-k6 driver ended up waiting on itself, leading to system hangs during boot. Fix this by removing the calls to the _begin() and _end() APIs from the powernow-k6 driver, since they rightly belong to the cpufreq core. (Note that during ->exit(), the powernow-k6 driver sets the frequency without any help from the cpufreq core. So add explicit calls to the _begin() and _end() APIs around that frequency transition alone, to take care of that special case. Also, add a missing 'break' statement there.) Fixes: 12478cf0c55e (cpufreq: Make sure frequency transitions are serialized) Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-29cpufreq: powernow-k6: Fix incorrect comparison with max_multiplerSrivatsa S. Bhat1-2/+3
The value of 'max_multiplier' is meant to be used for comparison with clock_ratio[index].driver_data, not the index itself! Fix the code in powernow_k6_cpu_exit() that has this bug. Also, while at it, make the for-loop condition look for CPUFREQ_TABLE_END, instead of hard-coding the loop count to 8. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: create another field .flags in cpufreq_frequency_tableViresh Kumar1-9/+9
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}Viresh Kumar1-2/+2
CPUFreq core has new infrastructure that would guarantee serialized calls to target() or target_index() callbacks. These are called cpufreq_freq_transition_begin() and cpufreq_freq_transition_end(). This patch converts existing drivers to use these new set of routines. Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-12cpufreq: add 'freq_table' in struct cpufreq_policyViresh Kumar1-1/+0
freq table is not per CPU but per policy, so it makes more sense to keep it within struct cpufreq_policy instead of a per-cpu variable. This patch does it. Over that, there is no need to set policy->freq_table to NULL in ->exit(), as policy structure is going to be freed soon. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06powernow-k6: reorder frequenciesMikulas Patocka1-7/+10
This patch reorders reported frequencies from the highest to the lowest, just like in other frequency drivers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06powernow-k6: correctly initialize default parametersMikulas Patocka1-4/+72
The powernow-k6 driver used to read the initial multiplier from the powernow register. However, there is a problem with this: * If there was a frequency transition before, the multiplier read from the register corresponds to the current multiplier. * If there was no frequency transition since reset, the field in the register always reads as zero, regardless of the current multiplier that is set using switches on the mainboard and that the CPU is running at. The zero value corresponds to multiplier 4.5, so as a consequence, the powernow-k6 driver always assumes multiplier 4.5. For example, if we have 550MHz CPU with bus frequency 100MHz and multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5 and bus frequency is 122MHz. The powernow-k6 driver then sets the multiplier to 4.5, underclocking the CPU to 450MHz, but reports the current frequency as 550MHz. There is no reliable way how to read the initial multiplier. I modified the driver so that it contains a table of known frequencies (based on parameters of existing CPUs and some common overclocking schemes) and sets the multiplier according to the frequency. If the frequency is unknown (because of unusual overclocking or underclocking), the user must supply the bus speed and maximum multiplier as module parameters. This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06powernow-k6: disable cache when changing frequencyMikulas Patocka1-17/+39
I found out that a system with k6-3+ processor is unstable during network server load. The system locks up or the network card stops receiving. The reason for the instability is the CPU frequency scaling. During frequency transition the processor is in "EPM Stop Grant" state. The documentation says that the processor doesn't respond to inquiry requests in this state. Consequently, coherency of processor caches and bus master devices is not maintained, causing the system instability. This patch flushes the cache during frequency transition. It fixes the instability. Other minor changes: * u64 invalue changed to unsigned long because the variable is 32-bit * move the logic to set the multiplier to a separate function powernow_k6_set_cpu_multiplier * preserve lower 5 bits of the powernow port instead of 4 (the voltage field has 5 bits) * mask interrupts when reading the multiplier, so that the port is not open during other activity (running other kernel code with the port open shouldn't cause any misbehavior, but we should better be safe and keep the port closed) This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25cpufreq: Implement light weight ->target_index() routineViresh Kumar1-30/+5
Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-16cpufreq: powernow: don't initialize part of policy set by coreViresh Kumar1-1/+0
Many common initializations of struct policy are moved to core now and hence this driver doesn't need to do it. This patch removes such code. Most recent of those changes is to call ->get() in the core after calling ->init(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16cpufreq: powernow: Use generic cpufreq routinesViresh Kumar1-20/+2
Most of the CPUFreq drivers do similar things in .exit() and .verify() routines and .attr. So its better if we have generic routines for them which can be used by cpufreq drivers then. This patch uses these generic routines in the powernow driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-30cpufreq: powernow: use cpufreq_table_validate_and_show()Viresh Kumar1-8/+1
Lets use cpufreq_table_validate_and_show() instead of calling cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-10cpufreq: Drop the owner field from struct cpufreq_driverViresh Kumar1-1/+0
We don't need to set .owner = THIS_MODULE any more in cpufreq drivers as this field isn't used any more by the cpufreq core. This patch removes it and updates all dependent drivers accordingly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar1-4/+4
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-02cpufreq: Notify all policy->cpus in cpufreq_notify_transition()Viresh Kumar1-6/+6
policy->cpus contains all online cpus that have single shared clock line. And their frequencies are always updated together. Many SMP system's cpufreq drivers take care of this in individual drivers but the best place for this code is in cpufreq core. This patch modifies cpufreq_notify_transition() to notify frequency change for all cpus in policy->cpus and hence updates all users of this API. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-02-13powernow-k6: Really enable auto-loadingBen Hutchings1-1/+1
Commit fa8031aefec0cf7ea6c2387c93610d99d9659aa2 ('cpufreq: Add support for x86 cpuinfo auto loading v4') added a device ID table to this driver, but didn't declare it as the module device ID table. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26cpufreq: Add support for x86 cpuinfo auto loading v4Andi Kleen1-4/+8
This marks all the x86 cpuinfo tables to the CPU specific device drivers, to allow auto loading by udev. This should simplify the distribution startup scripts for this greatly. I didn't add MODULE_DEVICE_IDs to the centrino and p4-clockmod drivers, because those probably shouldn't be auto loaded and the acpi driver be used instead (not fully sure on that, would appreciate feedback) The old nforce drivers autoload based on the PCI ID. ACPI cpufreq is autoloaded in another patch. v3: Autoload gx based on PCI IDs only. Remove cpu check (Dave Jones) v4: Use newly introduce HW_PSTATE feature for powernow-k8 loading Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-19[CPUFREQ] Move x86 drivers to drivers/cpufreq/Dave Jones1-0/+261
Signed-off-by: Dave Jones <davej@redhat.com>