summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/cpufreq-dt.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-08cpufreq-dt: make scaling_boost_freqs sysfs attr available when boost is enabledBartlomiej Zolnierkiewicz1-1/+8
Make scaling_boost_freqs sysfs attribute is available when cpufreq-dt driver is used and boost support is enabled. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-07cpufreq: dt: Add support for turbo/boost modeViresh Kumar1-0/+8
With opp-v2 DT bindings, few OPPs can be used only for the boost mode. But using such OPPs require the boost mode to be supported by cpufreq driver. We will parse DT bindings only during ->init() and so can enable boost support only after registering cpufreq driver. This enables boost support as soon as any policy has boost/turbo OPPs for its CPUs. We don't need to disable boost support as that is done by the core, when the driver is unregistered. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-07cpufreq: dt: Add support for operating-points-v2 bindingsViresh Kumar1-10/+46
Support for parsing operating-points-v2 bindings is in place now, lets modify cpufreq-dt driver to use them. For backward compatibility we will continue to support earlier bindings. Special handling for that is required, to make sure OPPs are initialized for all the CPUs. Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-17cpufreq: dt: allow driver to boot automaticallyFelipe Balbi1-0/+1
by adding the missing MODULE_ALIAS(), cpufreq-dt can be autoloaded by udev/systemd. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03cpufreq-dt: Drop unnecessary check before cpufreq_cooling_unregister() ↵Markus Elfring1-2/+1
invocation The cpufreq_cooling_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-29Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki1-0/+11
* pm-cpufreq: cpufreq: fix a NULL pointer dereference in __cpufreq_governor() cpufreq-dt: defer probing if OPP table is not ready * pm-cpuidle: cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
2014-12-18cpufreq-dt: defer probing if OPP table is not readyDmitry Torokhov1-0/+11
cpufreq-dt driver supports mode when OPP table is provided by platform code and not device tree. However on certain platforms code that fills OPP table may run after cpufreq driver tries to initialize, so let's report -EPROBE_DEFER if we do not find any entires in OPP table for the CPU. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-01cpufreq-dt: free OPP table created during ->init()Viresh Kumar1-2/+4
OPP layer now supports freeing of OPPs and we should free them once they aren't useful anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29cpufreq-dt: register cooling device from ->ready() callbackViresh Kumar1-19/+32
Currently we are calling of_cpufreq_cooling_register() from ->init() callback. At this point of time cpufreq driver's policy isn't completely ready to be used as few of its fields/structure/pointers aren't yet initialized. Because of_cpufreq_cooling_register() tries to access policy with help of cpufreq_cpu_get() and then tries to get freq-table as well, these calls fail. To fix this, register the cooling device after the policy is ready to be used. And the right callback for it is the newly added ->ready() one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-29cpufreq-dt: pass 'policy->related_cpus' to of_cpufreq_cooling_register()Viresh Kumar1-1/+1
The second parameter of of_cpufreq_cooling_register() should be the CPUs to which the frequency constraint will apply. As the cpufreq-dt driver now supports platforms with multiple 'struct cpufreq_policy' instances (i.e. > 1 clock domains for CPUs), passing 'cpu_present_mask' isn't correct anymore. As every policy will have a set of CPUs and that may not be equal to 'cpu_present_mask' always. So, pass only mask of CPUs which are controlled by current policy. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Eduardo Valentin <edubezval@gmail.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-20cpufreq: cpufreq-dt: Move newline to end of error messageGeert Uytterhoeven1-1/+1
Currently the error message is needlessly splitted across two lines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-06cpufreq: cpufreq-dt: Handle regulator_get_voltage() failureStefan Wahren1-2/+2
In error cases regulator_get_voltage() returns a negative value. So take care of it. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-06cpufreq: cpufreq-dt: Improve debug about matching OPPStefan Wahren1-0/+5
During test of new DT OPPs it's very helpful to print the matching OPP in case of frequency change. So it will be easier to find frequency rounding issues in the dts file. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-05cpufreq: cpufreq-dt: Fix arguments in clock failure error messageAbhilash Kesavan1-2/+2
Fix the swapped arguments in the clock failure dev_err. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-27cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)Geert Uytterhoeven1-1/+1
Commit 34e5a5273d6aa0ee ("cpufreq: cpufreq-dt: extend with platform_data") changed cpufreq_init() to only call cpumask_setall(policy->cpus) if the platform data indicates that all CPUs share the same clock. Before, cpufreq_generic_init() did this unconditionally. This causes a crash on r8a7791/koelsch when resuming from s2ram: Enabling non-boot CPUs ... CPU1: Booted secondary processor Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = ee71f980 [0000003c] *pgd=6eeb6003, *pmd=6e0e9003, *pte=00000000 Internal error: Oops: a07 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1397 Comm: s2ram Tainted: G W 3.18.0-rc2-koelsch-00762-g7eed2a4e61d2d978 #581 task: ee6b76c0 ti: ee7f0000 task.ti: ee7f0000 PC is at __cpufreq_add_dev.isra.24+0x24c/0x77c LR is at __cpufreq_add_dev.isra.24+0x244/0x77c pc : [<c029e084>] lr : [<c029e07c>] psr: 60000153 sp : ee7f1d48 ip : ee7f1d48 fp : ee7f1d84 r10: c04e8448 r9 : 00000000 r8 : 00000001 r7 : c054a8c4 r6 : 00000001 r5 : 00000001 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 20000153 r0 : c054a950 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user Control: 30c5307d Table: 6e71f980 DAC: fffffffd Process s2ram (pid: 1397, stack limit = 0xee7f0240) ... Backtrace: [<c029de38>] (__cpufreq_add_dev.isra.24) from [<c029e620>] (cpufreq_cpu_callback+0x6c/0x74) r10:eec75240 r9:c04e8448 r8:c04ef3a0 r7:00000001 r6:00000012 r5:00000000 r4:00000012 [<c029e5b4>] (cpufreq_cpu_callback) from [<c003f20c>] (notifier_call_chain+0x48/0x70) r4:ffffffdd r3:c029e5b4 [<c003f1c4>] (notifier_call_chain) from [<c003f2cc>] (__raw_notifier_call_chain+0x1c/0x24) r8:00000001 r7:00000010 r6:00000000 r5:00000000 r4:00000012 r3:ffffffff [<c003f2b0>] (__raw_notifier_call_chain) from [<c0026a00>] (__cpu_notify+0x34/0x50) [<c00269cc>] (__cpu_notify) from [<c0026a34>] (cpu_notify+0x18/0x1c) r4:00000001 [<c0026a1c>] (cpu_notify) from [<c0026c44>] (_cpu_up+0x108/0x144) [<c0026b3c>] (_cpu_up) from [<c0381c68>] (enable_nonboot_cpus+0x68/0xb8) r10:00000000 r9:c04e8ee6 r8:00000000 r7:00000003 r6:c04e8528 r5:c0506248 r4:00000001 [<c0381c00>] (enable_nonboot_cpus) from [<c0059038>] (suspend_devices_and_enter+0x29c/0x3e8) r6:c0506e70 r5:00000000 r4:00000000 r3:60000153 Restore the old default of calling cpumask_setall(policy->cpus) if no platform data is available to fix this. Fixes: 34e5a5273d6aa0ee (cpufreq: cpufreq-dt: extend with platform_data) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-27cpufreq: cpufreq-dt: disable unsupported OPPsLucas Stach1-25/+41
If the regulator connected to the CPU voltage plane doesn't support an OPP specified voltage with the acceptable tolerance it's better to just disable the OPP instead of constantly failing the voltage scaling later on. Includes a fix to move initialization of opp_freq outside the loop to avoid an endless loop from Geert Uytterhoeven. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21cpufreq: cpufreq-dt: adjust message related to regulatorsThomas Petazzoni1-2/+2
The cpufreq-dt driver tries to get a regulator for each CPU. This regulator is optional, but when not present, a scary message "failed to get cpuX regulator" is displayed. To solve this, we reduce the severity of the message from dev_warn() to dev_dbg() and we reword the message to not be as scary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21cpufreq: cpufreq-dt: extend with platform_dataThomas Petazzoni1-2/+15
This commit extends the cpufreq-dt driver to take a platform_data structure. This structure is for now used to tell the cpufreq-dt driver the layout of the clocks on the platform, i.e whether all CPUs share the same clock or whether each CPU has a separate clock. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20cpufreq: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03cpufreq: cpufreq-dt: fix potential double put of cpu OF nodeLucas Stach1-1/+2
If cpufreq_generic_init() fails we jump into the resource cleanup path which contains a of_node_put() call. Another instance of this has already been called at that time resulting a double decrement of the refcount. Fix this by calling of_node_put() only after we are sure that nothing has gone wrong. Fixes: d2f31f1da54f "cpufreq: cpu0: Move per-cluster initialization code to ->init()" Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-03cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'Viresh Kumar1-0/+363
The naming convention of this driver was always under the scanner, people complained that it should have a more generic name than cpu0, as it manages all CPUs that are sharing clock lines. Also, in future it will be modified to support any number of clusters with separate clock/voltage lines. Lets rename it to 'cpufreq_dt' from 'cpufreq_cpu0'. Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>