summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2017-11-23Merge tag 'for-linus-timers-conversion-final-v4.15-rc1' of ↵Thomas Gleixner1-7/+53
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent Pull the last batch of manual timer conversions from Kees Cook: - final batch of "non trivial" timer conversions (multi-tree dependencies, things Coccinelle couldn't handle, etc). - treewide conversions via Coccinelle, in 4 steps: - DEFINE_TIMER() functions converted to struct timer_list * argument - init_timer() -> setup_timer() - setup_timer() -> timer_setup() - setup_timer() -> timer_setup() (with a single embedded structure) - deprecated timer API removals (init_timer(), setup_*timer()) - finalization of new API (remove global casts)
2017-11-16Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-4/+31
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-14clocksource/timer_of: Rename timer_of_exit to timer_of_cleanupBenjamin Gaignard2-2/+9
Change the function name to something more explicit since it is only used in init error cases. Add __init annotation and description about the function usage. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mark.rutland@arm.com Cc: devicetree@vger.kernel.org Cc: alexandre.torgue@st.com Cc: arnd@arndb.de Cc: julien.thierry@arm.com Cc: daniel.lezcano@linaro.org Cc: linux@armlinux.org.uk Cc: robh+dt@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: mcoquelin.stm32@gmail.com Cc: sudeep.holla@arm.com Cc: ludovic.barre@st.com Link: https://lkml.kernel.org/r/1510649563-22975-2-git-send-email-benjamin.gaignard@linaro.org
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds9-113/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar10-0/+10
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-06arm64: Use physical counter for in-kernel reads when booted in EL2Christoffer Dall1-4/+8
Using the physical counter allows KVM to retain the offset between the virtual and physical counter as long as it is actively running a VCPU. As soon as a VCPU is released, another thread is scheduled or we start running userspace applications, we reset the offset to 0, so that userspace accessing the virtual timer can still read the virtual counter and get the same view of time as the kernel. This opens up potential improvements for KVM performance, but we have to make a few adjustments to preserve system consistency. Currently get_cycles() is hardwired to arch_counter_get_cntvct() on arm64, but as we move to using the physical timer for the in-kernel time-keeping on systems that boot in EL2, we should use the same counter for get_cycles() as for other in-kernel timekeeping operations. Similarly, implementations of arch_timer_set_next_event_phys() is modified to use the counter specific to the timer being programmed. VHE kernels or kernels continuing to use the virtual timer are unaffected. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-06arm64: Implement arch_counter_get_cntpct to read the physical counterChristoffer Dall1-0/+23
As we are about to use the physical counter on arm64 systems that have KVM support, implement arch_counter_get_cntpct() and the associated errata workaround functionality for stable timer reads. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman10-0/+10
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-29clocksource/drivers/timer-of: Add timer_of_exit functionBenjamin Gaignard2-0/+15
The timer-of API does not provide a function to undo what has been done by the timer_of_init() function. Add a timer_of_exit() function. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-1/+1
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20clockevents/drivers/cs5535: Improve resilience to spurious interruptsDavid Kozub1-1/+2
The interrupt handler mfgpt_tick() is not robust versus spurious interrupts which happen before the clock event device is registered and fully initialized. The reason is that the safe guard against spurious interrupts solely checks for the clockevents shutdown state, but lacks a check for detached state. If the interrupt hits while the device is in detached state it passes the safe guard and dereferences the event handler call back which is NULL. Add the missing state check. Fixes: 8f9327cbb6e8 ("clockevents/drivers/cs5535: Migrate to new 'set-state' interface") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171020093103.3317F6004D@linux.fjfi.cvut.cz
2017-10-19clocksource/drivers/mips-gic-timer: Add fastpath for local timer updatesMatt Redfearn1-2/+7
Always accessing the compare register via the CM redirect region is (relatively) slow. If the timer being updated is the current CPUs then this can be shortcutted by writing to the CM VP local region. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/mips-gic-timer: Remove pointless irq_save,restoreMatt Redfearn1-3/+0
The function gic_next_event is always called with interrupts disabled, so the local_irq_save / local_irq_restore are pointless - remove them. [Daniel Lezcano: Fixed warning by removing unused variable 'flags'] Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/arm_arch_timer: Fix DEFINE_PER_CPU expansionMark Rutland1-2/+1
Our ctags mangling script can't handle newlines inside of a DEFINE_PER_CPU(), leading to an annoying message whenever tags are built: ctags: Warning: drivers/clocksource/arm_arch_timer.c:302: null expansion of name pattern "\1" This was dealt with elsewhere in commit: 25528213fe9f75f4 ("tags: Fix DEFINE_PER_CPU expansions") ... by ensuring each DEFINE_PER_CPU() was contained on a single line, even where this would violate the usual code style (checkpatch warnings and all). Let's do the same for the arch timer driver, and get rid of the distraction. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/arm_arch_timer: Validate CNTFRQ after enabling frameArd Biesheuvel1-17/+21
The ACPI GTDT code validates the CNTFRQ field of each MMIO timer frame against the CNTFRQ system register of the current CPU, to ensure that they are equal, which is mandated by the architecture. However, reading the CNTFRQ field of a frame is not possible until the RFRQ bit in the frame's CNTACRn register is set, and doing so before that willl produce the following error: arch_timer: [Firmware Bug]: CNTFRQ mismatch: frame @ 0x00000000e0be0000: (0x00000000), CPU: (0x0ee6b280) arch_timer: Disabling MMIO timers due to CNTFRQ mismatch arch_timer: Failed to initialize memory-mapped timer. The reason is that the CNTFRQ field is RES0 if access is not enabled. So move the validation of CNTFRQ into the loop that iterates over the timers to find the best frame, but defer it until after we have selected the best frame, which should also have enabled the RFRQ bit. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource: Improve GENERIC_CLOCKEVENTS dependencyArnd Bergmann1-41/+9
We regularly run into build errors when a clocksource driver selects CONFIG_TIMER_OF while CONFIG_GENERIC_CLOCKEVENTS is disabled: In file included from drivers/clocksource/timer-of.c:25:0: drivers/clocksource/timer-of.h:35:28: error: field 'clkevt' has incomplete type At the moment, three drivers can show this behavior: ARMV7M_SYSTICK, CLKSRC_ST_LPC and CLKSRC_NPS. We could add further dependencies as we did many times, but I have looked a little bit more at what architectures are left that don't use GENERIC_CLOCKEVENTS, and this shows that there is a better solution. On arch/frv and arch/ia64, we never select CONFIG_GENERIC_CLOCKEVENTS and we also don't use ARCH_USES_GETTIMEOFFSET, which would block the clocksource Kconfig menu. On m68k, some platforms use CONFIG_GENERIC_CLOCKEVENTS, some use ARCH_USES_GETTIMEOFFSET, and some use neither of them. The good news is that there is no configuration that does not set CONFIG_GENERIC_CLOCKEVENTS but that wants to enable any of the Kconfig symbols in the menu, so we can simply replace the dependency with the stricter one. While in theory one could have a clocksource driver without the clockevent infrastructure, this seems unlikely to be relevant in the future any more. We can probably drop some of the other dependencies as well now, e.g. there should generally be no reason to depend on CONFIG_ARM unless the driver uses architecture specific assembly. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/rockchip: pr_err() strings should end with newlinesArvind Yadav1-1/+1
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/owl: pr_err() strings should end with newlinesArvind Yadav1-2/+2
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/fttmr010: pr_err() strings should end with newlinesArvind Yadav1-2/+2
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Use of_device_get_match_data() helperGeert Uytterhoeven1-4/+2
Use the existing of_device_get_match_data() helper instead of open-coding its functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Remove unused "renesas, channels-mask" handlingGeert Uytterhoeven1-17/+1
The in-driver channel configuration in sh_cmt_info.channels_mask is now always set for all CMT devices instantiated from DT. Hence the "renesas,channels-mask" property is no longer checked, and its handling can be removed, cfr. commit 4e18111ff38f0664 ("devicetree: bindings: Remove deprecated properties"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecatedGeert Uytterhoeven1-1/+5
Document in the driver that "renesas,cmt-48-gen2" is deprecated, but still supported for backward compatibility with old DTBs, cfr. commit 4e18111ff38f0664 ("devicetree: bindings: Remove deprecated properties"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Remove support for "renesas,cmt-32*"Geert Uytterhoeven1-20/+0
Remove driver matching support for the unused "renesas,cmt-32" and "renesas,cmt-32-fast" compatible values, cfr. commit 203bb3479958c48a ("devicetree: bindings: Remove unused 32-bit CMT bindings"). As this removes the last user of SH_CMT_32BIT_FAST, all support for this variant is removed from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Support separate R-Car Gen2 CMT0/1Magnus Damm1-11/+27
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support for the old DT binding is still kept around, however devices using such binding will be treated as a low-feature CMT0 device. If users want to make use of CMT1-specific features then they need to update their DTBs. No special CMT1-specific features are however implemented by his patch, only DT bindings are redone as groundwork for future feature patches. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Use 0x3f mask for SH_CMT_48BIT caseMagnus Damm1-3/+11
Always use 0x3f as channel mask for the SH_CMT_48BIT type of devices. Once this patch is applied the "renesas,channels-mask" property will be ignored by the driver for older devices matching SH_CMT_48BIT. In the future when all CMT types store channel mask in the driver then we will be able to deprecate and remove "renesas,channels-mask" from DTS. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-13arm_arch_timer: Expose event stream statusJulien Thierry1-3/+22
The arch timer configuration for a CPU might get reset after suspending said CPU. In order to reliably use the event stream in the kernel (e.g. for delays), we keep track of the state where we can safely consider the event stream as properly configured. After writing to cntkctl, we issue an ISB to ensure that subsequent delay loops can rely on the event stream being enabled. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-09-25x86/numachip: Add const and __initconst to numachip2_clockeventBhumika Goyal1-1/+1
Make this const as it is only used during a copy operation and add __initconst as this usage is during the initialization phase. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: julia.lawall@lip6.fr Cc: daniel.lezcano@linaro.org Link: http://lkml.kernel.org/r/1504030631-10812-1-git-send-email-bhumirks@gmail.com
2017-09-18clocksource/integrator: Fix section mismatch warningArnd Bergmann1-2/+2
gcc-4.6 and older fail to inline integrator_clocksource_init, so they end up showing a harmless warning: WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init() The function integrator_clocksource_init() references the function __init clocksource_mmio_init(). This is often because integrator_clocksource_init lacks a __init annotation or the annotation of clocksource_mmio_init is wrong. Add the missing __init annotation that makes it build cleanly with all compilers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thierry Reding <treding@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/20170915194310.1170514-1-arnd@arndb.de
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds1-6/+31
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds8-16/+261
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A rather small update for the time(r) subsystem: - A new clocksource driver IMX-TPM - Minor fixes to the alarmtimer facility - Device tree cleanups for Renesas drivers - A new kselftest and fixes for the timer related tests - Conversion of the clocksource drivers to use %pOF - Use the proper helpers to access rlimits in the posix-cpu-timer code" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Ensure RTC module is not unloaded clocksource: Convert to using %pOF instead of full_name clocksource/drivers/bcm2835: Remove message for a memory allocation failure devicetree: bindings: Remove deprecated properties devicetree: bindings: Remove unused 32-bit CMT bindings devicetree: bindings: Deprecate property, update example devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings devicetree: bindings: Remove sh7372 CMT binding clocksource/drivers/imx-tpm: Add imx tpm timer support dt-bindings: timer: Add nxp tpm timer binding doc posix-cpu-timers: Use dedicated helper to access rlimit values alarmtimer: Fix unavailable wake-up source in sysfs timekeeping: Use proper timekeeper for debug code kselftests: timers: set-timer-lat: Add one-shot timer test cases kselftests: timers: set-timer-lat: Tweak reporting when timer fires early kselftests: timers: freq-step: Fix build warning kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
2017-08-31clocksource: Convert to using %pOF instead of full_nameRob Herring4-15/+13
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-30clocksource: mips-gic-timer: Use new GIC accessor functionsPaul Burton1-6/+31
Switch from calling functions exported by the GIC interrupt controller to using new accessors provided by asm/mips-gic.h. This will allow the counter-handling functionality to be removed from the interrupt controller driver, where it doesn't really belong, and also allow for inlining of the accesses to the GIC. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17021/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29clocksource/drivers/bcm2835: Remove message for a memory allocation failureMarkus Elfring1-1/+0
The bcm2835_timer_init() function emits an error message in case of a memory allocation failure. This is pointless as the mm core does that already. Remove this message. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-29clocksource/drivers/imx-tpm: Add imx tpm timer supportDong Aisheng3-0/+248
IMX Timer/PWM Module (TPM) supports both timer and pwm function while this patch only adds the timer support. PWM would be added later. The TPM counter, compare and capture registers are clocked by an asynchronous clock that can remain enabled in low power modes. NOTE: We observed in a very small probability, the bus fabric contention between GPU and A7 may results a few cycles delay of writing CNT registers which may cause the min_delta event got missed, so we need add a ETIME check here in case it happened. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-25Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar4-9/+10
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependenciesMatt Redfearn1-1/+1
In v4.13, CLKSRC_PISTACHIO can select TIMER_OF on architectures without GENERIC_CLOCKEVENTS, resulting in a struct clock_event_device missing some required features and build breakage compiling timer_of.c. One of the symbols selecting TIMER_OF is CLKSRC_PISTACHIO, so add the dependency on GENERIC_CLOCKEVENTS. Thanks to kbuild test robot for finding this error (https://lkml.org/lkml/2017/7/16/249) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Suggested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-11clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
The current code checks the return value of the of_io_request_and_map() function as it was returning a NULL pointer in case of error. However, it returns an error code encoded in the pointer return value, not a NULL value. Fix this by checking the returned pointer against IS_ERR() and return the error with PTR_ERR(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-10clocksource/drivers/em_sti: Fix error return codes in em_sti_probe()Gustavo A. R. Silva1-5/+6
Propagate the return values of platform_get_irq and devm_request_irq on failure. Cc: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-10clocksource/drivers/arm_arch_timer: Fix mem frame loop initializationMatthias Kaehlcke1-1/+1
The loop to find the best memory frame in arch_timer_mem_acpi_init() initializes the loop counter with itself ('i = i'), which is suspicious in the first place and pointed out by clang. The loop condition is 'i < timer_count' and a prior for loop exits when 'i' reaches 'timer_count', therefore the second loop is never executed. Initialize the loop counter with 0 to iterate over all timers, which supposedly was the intention before the typo monster attacked. Fixes: c2743a36765d3 ("clocksource: arm_arch_timer: add GTDT support for memory-mapped timer") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-10clocksource/arm_arch_timer: Use static_branch_enable_cpuslocked()Marc Zyngier1-1/+5
Use the new static_branch_enable_cpuslocked() function to switch the workaround static key on the CPU hotplug path. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-5-marc.zyngier@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctlySergei Shtylyov1-2/+10
of_irq_get_byname() may return a negative error number as well as 0 on failure, while timer_irq_init() only checks for 0, blithely continuing with the call to request_[percpu_]irq() -- those functions expect *unsigned int*, so would probably fail anyway when a large IRQ number resulting from a conversion of a negative error number is passed to them... This, however, is incorrect behavior -- error number is not IRQ number. Filter out the negative error numbers, complain, and return them to the timer_irq_init()'s callers... Fixes: dc11bae78529 ("clocksource/drivers: Add timer-of common init routine") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/20170717180114.678825147@cogentembedded.com
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+180
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-06-27clocksource/drivers/mips-gic-timer: Fix an error code in ↵Christophe Jaillet1-2/+3
'gic_clocksource_of_init()' 'clk' is a valid pointer at this point. So calling PTR_ERR on it is pointess. Return the error code from 'clk_prepare_enable()' if it fails instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-27clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomapArvind Yadav1-2/+6
In case of error at init time, rollback iomapping. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-27clocksource/drivers/tcb_clksrc: Make IO endian agnosticAlexandre Belloni1-29/+29
Now that AVR32 is gone, we can use the proper IO accessors that are correctly handling endianness. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-26clocksource/drivers/sun4i: Switch to the timer-of common initDaniel Lezcano2-94/+78
Previously a framework to factor out the drivers init function has been merged. Use this common framework in this driver, we get: Before: text data bss dec hex filename 1787 384 12 2183 887 drivers/clocksource/sun4i_timer.o After: text data bss dec hex filename 1407 512 0 1919 77f drivers/clocksource/sun4i_timer.o Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Chen-Yu Tsai <wens@csie.org>
2017-06-26clocksource/drivers/timer-of: Fix invalid iomap checkDaniel Lezcano1-1/+1
A typo in the code checks the return value of iomap against !NULL and, thus, fails everytime the mapping succeed. Fix this by inverting the condition in the check. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-22clocksource/drivers: Fix uninitialized variable use in timer_of_initArnd Bergmann1-3/+2
If none of the flags are set, 'ret' is uninitialized as pointed out by gcc: drivers/clocksource/timer-of.c: In function 'timer_of_init': drivers/clocksource/timer-of.c:160:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] Since calling the function without any of the flags is an error, set the return value to -EINVAL for that case. [ tglx: Get rid of the silly backwards goto while at it ] Fixes: dc11bae78529 ("clocksource/drivers: Add timer-of common init routine") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/20170621215005.3870011-1-arnd@arndb.de
2017-06-21Merge branch 'timers/urgent' into timers/coreThomas Gleixner3-2/+4
Pick up dependent changes.