summaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2013-12-16mfd: s2mps11: Fix build after regmap field rename in sec-core.cKrzysztof Kozlowski1-3/+3
Fix building of s2mps11 regulator and clock drivers after renaming regmap field in struct sec_pmic_dev in commit: - "mfd/rtc: s5m: Fix register updating by adding regmap for RTC" Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-12Merge tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds10-29/+1238
Pull clock framework changes from Mike Turquette: "The clock changes for 3.13 are an even mix of framework improvements & bug fixes along with updates to existing clock drivers and the additional of new clock drivers" * tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux: clk: new driver for efm32 SoC clk: of: helper for determining number of parent clocks clk/zynq: Fix possible memory leak clk: keystone: Build Keystone clock drivers clk: keystone: Add gate control clock driver clk: keystone: add Keystone PLL clock driver Documentation: Add documentation for APM X-Gene clock binding clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC clk: Add APM X-Gene SoC clock driver clk: wm831x: get rid of the implementation of remove function clk: Correct lookup logic in clk_fetch_parent_index() clk: Use kcalloc() to allocate arrays clk: Add error handling to clk_fetch_parent_index()
2013-11-11powerpc: add missing explicit OF includes for ppcRob Herring1-0/+1
Commit b5b4bb3f6a11f9 (of: only include prom.h on sparc) removed implicit includes of of_*.h headers by powerpc's prom.h. Some components were missed in initial clean-up patch, so add the necessary includes to fix powerpc builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-ide@vger.kernel.org Cc: linux-crypto@vger.kernel.org
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds3-1/+561
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-11-11Merge tag 'soc-for-linus' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
2013-11-11Merge tag 'cleanup-for-linus' of ↵Linus Torvalds8-163/+147
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.13. Qualcomm msm targets had a bunch of code removal for legacy non-DT platforms. Nomadik saw more device tree conversions and cleanup of old code. Tegra has some code refactoring, etc. One longish patch series from Sebastian Hasselbarth changes the init_time hooks and tries to use a generic implementation for most platforms, since they were all doing more or less the same things. Finally the "shark" platform is removed in this release. It's been abandoned for a while and nobody seems to care enough to keep it around. If someone comes along and wants to resurrect it, the removal can easily be reverted and code brought back. Beyond this, mostly a bunch of removals of stale content across the board, etc" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits) ARM: gemini: convert to GENERIC_CLOCKEVENTS ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code MAINTAINERS: Add patterns for DTS files for AT91 ARM: at91: remove init_machine() as default is suitable ARM: at91/dt: split sama5d3 peripheral definitions ARM: at91/dt: split sam9x5 peripheral definitions ARM: Remove temporary sched_clock.h header ARM: clps711x: Use linux/sched_clock.h MAINTAINERS: Add DTS files to patterns for Samsung platform ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order clk: nomadik: fix missing __init on nomadik_src_init ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support ...
2013-11-04clk: new driver for efm32 SoCUwe Kleine-König2-0/+82
This patch adds support for the clocks provided by the Clock Management Unit of Energy Micro's efm32 Giant Gecko SoCs including device tree bindings. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-28Merge branch 'cleanup/dt-clock' into next/socOlof Johansson8-150/+155
Merging in dt clock cleanup as a pre-req with some of the later SoC branches. There are a handful of conflicts here -- some of the already merged SoC branches should have been based on the cleanup but weren't. In particular, a remove/add of include on highbank and two remove/remove conflicts on kirkwood were fixed up. * cleanup/dt-clock: (28 commits) ARM: vt8500: remove custom .init_time hook ARM: vexpress: remove custom .init_time hook ARM: tegra: remove custom .init_time hook ARM: sunxi: remove custom .init_time hook ARM: sti: remove custom .init_time hook ARM: socfpga: remove custom .init_time hook ARM: rockchip: remove custom .init_time hook ARM: prima2: remove custom .init_time hook ARM: nspire: remove custom .init_time hook ARM: nomadik: remove custom .init_time hook ARM: mxs: remove custom .init_time hook ARM: kirkwood: remove custom .init_time hook ARM: imx: remove custom .init_time hook ARM: highbank: remove custom .init_time hook ARM: exynos: remove custom .init_time hook ARM: dove: remove custom .init_time hook ARM: bcm2835: remove custom .init_time hook ARM: bcm: provide common arch init for DT clocks ARM: call of_clk_init from default time_init handler ARM: vt8500: prepare for arch-wide .init_time callback ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-27Merge tag 'ux500-dt-for-v3.13-3' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Five incremental device tree patches around the clock handling, and adding SSP/SPI devices to the device tree. * tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: register all SSP and SPI blocks ARM: ux500: fix I2C4 clock bit ARM: ux500: fix clock for GPIO blocks 6 and 7 clk: ux500: fix erroneous bit assignment ARM: ux500: fix clock for GPIO block 8 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-18clk: ux500: fix erroneous bit assignmentLinus Walleij1-1/+1
Due to a typo or similar, the peripheral group 2 clock 11 gate was set to bit 1 instead of bit 11. We need to fix this to be able to set the correct enable bit in the device tree: when trying to correct the bit assignment in the device tree, the system would hang. Cc: Mike Turquette <mturquette@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-14clk: fixed-factor: Fix a trivial typoEzequiel Garcia1-1/+1
Just a trivial print message typo fix. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-07clk: of: helper for determining number of parent clocksMike Turquette1-0/+6
Walks the "clocks" array of parent clock phandles and returns the number. Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: fixup argument order when setting VCO parametersJonathan Austin1-1/+1
The order of arguments in the call to vco_set() for the ICST clocks appears to have been switched in error, which results in the VCO not being initialised correctly. This in turn stops the integrated LCD on things like Integrator/CP from working correctly. This patch fixes the order and restores the expected functionality. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2013-10-07clk/zynq: Fix possible memory leakFelipe Pena1-1/+15
The zynq_clk_register_fclk function can leak memory (fclk_lock) when unable to alloc memory for fclk_gate_lock Signed-off-by: Felipe Pena <felipensp@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: socfpga: Fix incorrect sdmmc clock nameDinh Nguyen1-1/+1
The SD/MMC clock is named "sdmmc_clk", and NOT "mmc_clk". Because of this, the SD driver was getting the incorrect clock value. This prevented the SD driver from initializing correctly. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: keystone: Build Keystone clock driversSantosh Shilimkar3-0/+9
Now build the keystone common clock drivers. The build is made conditional based on COMMON_CLK_KEYSTONE Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: keystone: Add gate control clock driverSantosh Shilimkar1-0/+264
Add the driver for the clock gate control which uses PSC (Power Sleep Controller) IP on Keystone 2 based SOCs. It is responsible for enabling and disabling of the clocks for different IPs present in the SoC. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: keystone: add Keystone PLL clock driverSantosh Shilimkar1-0/+305
Add the driver for the PLL IPs found on Keystone 2 devices. The PLL IP typically has a multiplier, a divider and a post-divider. The PLL IPs like ARMPLL, DDRPLL and PAPLL are controlled by the memory mapped register where as the Main PLL is controlled by a PLL controller and memory map registers. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: nomadik: fix missing __init on nomadik_src_initSebastian Hesselbarth1-1/+1
nomadik_src_init references __initconst sections but lacks an __init itself. Add __init to fix the section mismatch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07clk: Add APM X-Gene SoC clock driverLoc Ho3-0/+529
clk: Add APM X-Gene SoC clock driver for reference, PLL, and device clocks. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Vinayak Kale <vkale@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-06clk: armada-370: fix tclk frequenciesSimon Guinot1-2/+2
This patch fixes the tclk frequency array for the Armada-370 SoC. This bug has been introduced by commit 6b72333d ("clk: mvebu: add Armada 370 SoC-centric clock init"). A wrong tclk frequency affects the following drivers: mvsdio, mvneta, i2c-mv64xxx and mvebu-devbus. This list may be incomplete. About the mvneta Ethernet driver, note that the tclk frequency is used to compute the Rx time coalescence. Then, this bug harms the coalescence configuration and also degrades the networking performances with the default values. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org Signed-off-by: Michael Turquette <mturquette@deferred.io>
2013-10-02clk: wm831x: get rid of the implementation of remove functionLaxman Dewangan1-6/+0
The remove function implemented for platform driver's remove callback just return 0 as part of its implementation. Remove this APIs and do not pass the valid .remove for platform driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-01clk: nomadik: set all timers to use 2.4 MHz TIMCLKLinus Walleij1-0/+21
This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-01clk: Correct lookup logic in clk_fetch_parent_index()Tomasz Figa1-4/+7
This function is supposed to iterate over all parents of given child clock to find the index of given parent clock in its parent list, using parent cache if possible and falling back to string compare otherwise. However currently the logic falls back to string compare in every iteration in which clock cache entry does not match given parent, due to wrong check conditions. This patch corrects the logic to continue the loop if parent cache entry is present and does not match requested parent clock. In addition, redundant checks for parent cache array presence are removed, because it is always allocated in the beginning of the function. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-01clk: Use kcalloc() to allocate arraysTomasz Figa1-7/+7
Instead of calculating sizes of arrays manually, kcalloc() can be used to allocate arrays of elements with defined size. This is just a cleanup patch without any functional changes. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-01clk: Add error handling to clk_fetch_parent_index()Tomasz Figa1-11/+14
There are at least two different error cases that can happen in clk_fetch_parent_index() function: - allocation failure, - parent clock lookup failure, however it returns only an u8, which is supposed to contain parent clock index. This patch modified the function to return full int instead allowing positive clock indices and negative error codes to be returned. All users of this function are adjusted as well to handle the return value correctly. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-30Merge tag 'ux500-dt-for-v3.13-2' of ↵Olof Johansson3-1/+561
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: This is a huge device tree and ATAG removal series for ux500: - Move all the clock definitions over to the device tree - Remove all now-redundant AUXDATA and make the ux500 device tree only * tag 'ux500-dt-for-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (92 commits) ARM: ux500: delete devices-common remnants clk: ux500: Provide a look-up for the ARMSS clock ARM: ux500: Enable CPUFreq on Snowball ARM: ux500: Provide a Device Tree node for CPUFreq in the DBx500 ARM: ux500: Provide a clock lookup for the Hash driver ARM: ux500: Provide a clock lookup for the Crypto driver ARM: ux500: Fix trivial white-space error in the DBX500 DTSI file ARM: ux500: Remove ATAG booting support for Snowball ARM: ux500: Remove ATAG booting support for HREF ARM: ux500: Remove ATAG booting support for U8520 ARM: ux500: Remove ATAG booting support for MOP500 ARM: ux500: Purge UIB framework when booting with ATAGs ARM: ux500: Take out STUIB support when not booting with Device Tree ARM: ux500: Remove BU21013 ROHM TS support when booting with only ATAGs ARM: ux500: Don't register the STMPE/SKE when booting with ATAG support ARM: ux500: Delete U8500 UIB support when booting with ATAGs ARM: ux500: Don't register Synaptics RMI4 TS when booting with ATAGs ARM: ux500: Purge DB8500 PRCMU registration when not booting with DT ARM: ux500: Stop requesting the SoC device to play 'parent' role ARM: ux500: Remove UART support when booting without Device Tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-29ARM: mxs: remove custom .init_time hookSebastian Hesselbarth2-15/+16
This patch converts clk-imx2[38] clocksource_of_init compatible init associated with fsl,imx2[38]-clkctrl. With arch/arm calling of_clk_init(NULL) from time_init(), we can now also remove custom .init_time hooks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-29ARM: highbank: remove custom .init_time hookSebastian Hesselbarth1-3/+7
With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. Highbank clock provider need a reference to system registers, as a workaround current clk driver maps those independent of arch code now. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29ARM: bcm2835: remove custom .init_time hookSebastian Hesselbarth1-8/+0
With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. Also remove call to of_clk_init from clk-bcm2835 with core fixed_clock match, as this has already been registered now. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29ARM: vt8500: prepare for arch-wide .init_time callbackSebastian Hesselbarth1-10/+0
Current vt8500 board init calls of_clk_init() from vtwm_clk_init. To allow consolidation of DT driven .time_init, move of_clock_init() to a temporary .time_init callback that will be removed when arch-wide callback is available. With previous pmc_base parsing helper for vt8500 clock providers, we can also safely remove the call to vtwm_clk_init() and get rid of some includes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: vt8500: parse pmc_base from clock driverSebastian Hesselbarth1-0/+24
Currently, clock providers for vt8500 depend on machine_init providing pmc_base address before calling of_clk_init. With upcoming arch-wide .time_init calling of_clk_init, we should make clock providers independent of mach code. This adds a pmc_base parsing helper to current clock provider that gets called if there is no pmc_base set, yet. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: sunxi: declare OF clock providerSebastian Hesselbarth1-5/+6
Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts sunxi clock providers to make use of it and get rid of the mach specific clk init call. As sunxi has a bunch of independent clk provider nodes, we hook current clock init to board compatible to make it called once. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: prima2: declare OF clock providerSebastian Hesselbarth1-23/+6
Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts prima2 clock provider to make use of it and get rid of the mach specific clk init call. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Barry Song <baohua.song@csr.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: nomadik: declare OF clock providerSebastian Hesselbarth1-30/+15
Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts nomadik clock provider to make use of it and get rid of the mach specific clk init call. As clocks require system reset controller base address to be initialized each clock driver checks src_base and calls new nomadik_src_init if required. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29clk: nomadik: move src init out of nomadik_clk_initSebastian Hesselbarth1-70/+74
nomadik_clk_init currently also maps system reset controller base address used by clocks and registers a reboot notifier. To allow further cleanup of nomadik clk setup, this moves system reset controller setup from nomadik_clk_init to its own function. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-26clk: ux500: Provide a look-up for the ARMSS clockLee Jones1-0/+1
The ARMSS clock is used by the newly DT enabled CPUFreq driver. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the TWD clockLee Jones1-2/+5
This patch enables the TWD fixed factor clock to be specified from Device Tree via phandles to the "smp-twd-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the RTC clockLee Jones1-2/+5
This patch enables the RTC fixed frequency clock to be specified from Device Tree via phandles to the "rtc32k-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCC Kernel clockLee Jones1-0/+32
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-kernel-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCC Peripheral clockLee Jones1-0/+52
This patch enables clocks to be specified from Device Tree via phandles to the "prcc-periph-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add Device Tree support for the PRCMU clockLee Jones1-2/+48
This patch enables clocks to be specified from Device Tree via phandles to the "prcmu-clock" node. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocksLee Jones1-0/+22
PRCC (peripheral and kernel) clocks are specified using a property tuple <&phandle base bit>, where 'base' is the peripheral (1, 2, 3, 5 or 6), and bit is read-in value into that peripheral stipulated by the hardware specification. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Provide u8500_clk with skeleton Device Tree supportLee Jones1-0/+19
The functional components will be added on a per-clock basis. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Copy u8500_clk_init() ready for DT enablementLee Jones2-0/+382
Here we're using the old clock initialisation function as a template. It's necessary to remove all of the clk_register_clkdev() calls as they don't make sense when booting with Device Tree. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26clk: ux500: Remove BML8580 clockLee Jones1-1/+1
There is no mention of the PRCMU_BML8580CLK in any of the Design Specifications for the chips supported in Mainline. In fact, where it is incorrectly used in the u8540 clock definition driver it would have the side effect of using the incorrect clock management address ([PRCM_BML8580CLK_MGT] 0x108 instead of the correct value 0x04C). Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-22clk: nomadik: set all timers to use 2.4 MHz TIMCLKLinus Walleij1-0/+21
This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17ARM: S3C64XX: Migrate clock handling to Common Clock FrameworkTomasz Figa1-2/+0
This patch migrates the s3c64xx platform to use the new clock driver using Common Clock Framework. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>