summaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds2-136/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd2-136/+14
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-01Merge tag 'rtc-5.18' of ↵Linus Torvalds6-0/+425
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The bulk of the patches are about replacing the uie_unsupported struct rtc_device member by a feature bit. Subsystem: - remove uie_unsupported, all users have been converted to clear RTC_FEATURE_UPDATE_INTERRUPT and provide a reason - RTCs with an alarm with a resolution of a minute are now letting the core handle rounding down the alarm time - fix use-after-free on device removal New driver: - OP-TEE RTC PTA Drivers: - sun6i: Add H616 support - cmos: Fix the AltCentury for AMD platforms - spear: set range" * tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits) rtc: check if __rtc_read_time was successful rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram rtc: mc146818-lib: Fix the AltCentury for AMD platforms rtc: optee: add RTC driver for OP-TEE RTC PTA rtc: pm8xxx: Return -ENODEV if set_time disallowed rtc: pm8xxx: Attach wake irq to device clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h rtc: remove uie_unsupported rtc: xgene: stop using uie_unsupported rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT rtc: hym8563: let the core handle the alarm resolution rtc: hym8563: switch to devm_rtc_allocate_device rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT rtc: efi: switch to devm_rtc_allocate_device rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature rtc: spear: fix spear_rtc_read_time rtc: spear: drop uie_unsupported rtc: spear: set range rtc: spear: switch to devm_rtc_allocate_device rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT ...
2022-03-30Merge tag 'clk-for-linus' of ↵Linus Torvalds194-3662/+10765
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
2022-03-29Merge branches 'clk-sifive' and 'clk-visconti' into clk-nextStephen Boyd9-239/+219
* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd29-945/+5927
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd51-1488/+598
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into ↵Stephen Boyd27-221/+1320
clk-next - Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd20-309/+1290
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-29Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' ↵Stephen Boyd66-460/+1411
into clk-next - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
2022-03-29clk: zynq: Update the parameters to zynq_clk_register_periph_clkShubhrajyoti Datta1-6/+6
In case there are only one gate or the two_gate is 0 the clk1 clock passed is not used. We are passing 0 which is arm_pll. Pass a invalid clock instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-29clk: zynq: trivial warning fixShubhrajyoti Datta1-0/+1
Fix the below warning WARNING: Missing a blank line after declarations + int enable = !!(fclk_enable & BIT(i - fclk0)); + zynq_clk_register_fclk(i, clk_output_name[i], Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220222130903.17235-2-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds1-1/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-25clk: Drop the rate range on clk_put()Maxime Ripard2-14/+136
When clk_put() is called we don't make another clk_set_rate() call to re-evaluate the rate boundaries. This is unlike clk_set_rate_range() that evaluates the rate again each time it is called. However, clk_put() is essentially equivalent to clk_set_rate_range() since after clk_put() completes the consumer's boundaries shouldn't be enforced anymore. Let's add a call to clk_set_rate_range() in clk_put() to make sure those rate boundaries are dropped and the clock provider drivers can react. Also add a few tests to make sure this case is covered. Fixes: c80ac50cbb37 ("clk: Always set the rate on clk_set_range_rate") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220325161144.1901695-4-maxime@cerno.tech [sboyd@kernel.org: Reword commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-25clk: test: Test clk_set_rate_range on orphan muxMaxime Ripard1-0/+105
A bug recently affected the Tegra30 where calling clk_set_rate_range() on a clock would make it change its rate to the minimum. This was due to the clock in question being a mux that was orphan at registration, which lead to the clk_core req_rate being 0, and the clk_set_rate_range() function then calling clk_set_rate() with req_rate, effectively making that clock running at the minimum rate allowed, even though the initial rate was within that range. Make a test suite to create a mux initially orphan, and then make sure that if our clock rate was initially within a given range, then enforcing that range won't affect it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220325161144.1901695-3-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-25clk: Initialize orphan req_rateMaxime Ripard1-0/+13
When registering a clock that doesn't have a recalc_rate implementation, and doesn't have its parent registered yet, we initialize the clk_core rate and 'req_rate' fields to 0. The rate field is later updated when the parent is registered in clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the 'req_rate' field is never updated. This leads to an issue in clk_set_rate_range() and clk_put(), since those functions will call clk_set_rate() with the content of 'req_rate' to provide drivers with the opportunity to change the rate based on the new boundaries. In this case, we would call clk_set_rate() with a rate of 0, effectively enforcing the minimum allowed for this clock whenever we would call one of those two functions, even though the actual rate might be within range. Let's fix this by setting 'req_rate' in clk_core_reparent_orphans_nolock() with the rate field content just updated by the call to __clk_recalc_rates(). Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks") Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # T30 Nexus7 Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220325161144.1901695-2-maxime@cerno.tech [sboyd@kernel.org: Reword comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-25clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.hAlexandre Belloni1-0/+2
This solves: >> drivers/clk/sunxi-ng/ccu-sun6i-rtc.c:334:5: warning: no previous prototype for 'sun6i_rtc_ccu_probe' [-Wmissing-prototypes] 334 | int sun6i_rtc_ccu_probe(struct device *dev, void __iomem *reg) | ^~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220320210905.6606-1-alexandre.belloni@bootlin.com
2022-03-24clk: qcom: gcc-msm8994: Fix gpll4 widthKonrad Dybcio1-0/+1
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-23Merge tag 'arm-drivers-5.18' of ↵Linus Torvalds6-11/+1875
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ...
2022-03-23clk: sunxi-ng: sun6i-rtc: Add support for H6Samuel Holland1-0/+15
H6 supports IOSC calibration and an ext-osc32k input. Unlike newer SoCs, it has a single parent for its fanout clock. Add support for H6 in the CCU driver, replacing the support in the existing early OF clock provider. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220203021736.13434-7-samuel@sholland.org
2022-03-23clk: sunxi-ng: Add support for the sun6i RTC clocksSamuel Holland4-0/+400
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M", or "osc24M") as well. The H6 also adds a calibration circuit for IOSC. Later SoCs introduce further variations on the design: - H616 adds an additional mux for the 32 kHz fanout source. - R329 adds an additional mux for the RTC timekeeping clock, a clock for the SPI bus between power domains inside the RTC, and removes the IOSC calibration functionality. Take advantage of the CCU framework to handle this increased complexity. This driver is intended to be a drop-in replacement for the existing RTC clock provider. So some runtime adjustment of the clock parents is needed, both to handle hardware differences, and to support the old binding which omitted some of the input clocks. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220203021736.13434-6-samuel@sholland.org
2022-03-23clk: sunxi-ng: mux: Allow muxes to have keysSamuel Holland2-0/+8
The muxes in the RTC can only be updated when setting a key field to a specific value. Add a feature flag to denote muxes with this property. Since so far the key value is always the same, it does not need to be provided separately for each mux. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220203021736.13434-5-samuel@sholland.org
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-18clk: rs9: Add Renesas 9-series PCIe clock generator driverMarek Vasut3-0/+332
Add driver for Renesas 9-series PCIe clock generators. This driver is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C PCIe clock generators, currently the only tested and supported chip is 9FGV0241. The driver is capable of configuring per-chip spread spectrum mode and output amplitude, as well as per-output slew rate. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de [sboyd@kernel.org: Use non-underscore API for fixed factor] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-18clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()Marek Vasut1-0/+22
Add an API for a fixed factor clk that uses an index for the parent instead of a string name. This allows us to move drivers away from the string based method of describing parents and use the DT/firmware based method instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de [sboyd@kernel.org: Expose a new API instead of internal function] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-17clk: visconti: prevent array overflow in visconti_clk_register_gates()Dan Carpenter3-2/+5
This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates(). Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220316083533.GA30941@kili Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: sifive: Move all stuff into SoCs header files from C filesZong Li6-235/+214
Improve PRCI driver to reduce the complexity, we remove the SoCs C files by putting all stuff in each SoCs header files, and include these SoCs-specific header files in core of PRCI. It can also avoid the W=1 kernel build warnings about variable defined but not used [-Wunused-const-variable=], like commit 487dc7bb6a0c ("clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used") does. Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Lee Jones <lee.jones@linaro.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/a3c7ec5c46c1d8be455d1c347db4855bb56cec53.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: sifive: Add SoCs prefix in each SoCs-dependent dataZong Li2-50/+35
This patch is prerequisite for moving SoCs C files into SoCs header files. Currently, fu540-prci.c and fu740-prci.c use same names for several macro definitions and variables, it would cause redefinition error when we trying to include all stuff in sifive-prci.c. In this patch, we also remove the temporary macro definitions which are added by previous patch. Signed-off-by: Zong Li <zong.li@sifive.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/7728ef662c59449ce954b1b62c6ad5241e07adfb.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: sifive: duplicate the macro definitions for the time beingZong Li2-2/+15
This is a temporary patch in whole patch set. We are going to change the macro name in dt-binding, in order to avoid breaking the driver build and git bisect, add these macro definitions for the time being, and we will remove them later. Signed-off-by: Zong Li <zong.li@sifive.com> Link: https://lore.kernel.org/r/8cfd57f01cfb59adb716eb13ca0c8250c246dcb2.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: qcom: sm6125-gcc: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220314115354.144023-16-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: clkctrl: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220314115354.144023-15-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: imx: Select MXC_CLK for i.MX93 clock driverAbel Vesa1-0/+1
Most of the i.MX clock generic API is built by selecting MXC_CLK. Without it, the i.MX93 clock driver will fail to build: aarch64-linux-gnu-ld: drivers/clk/imx/clk-imx93.o: in function `imx93_clocks_probe': clk-imx93.c:(.text+0xa8): undefined reference to `imx_obtain_fixed_clk_hw' So fix this by selecting MXC_CLK for the CLK_IMX93. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220315082446.3120850-1-abel.vesa@nxp.com Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for dra7Tony Lindgren4-832/+5
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl") Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section") Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-4-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for am4Tony Lindgren5-246/+6
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-3-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for am3Tony Lindgren4-230/+4
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-2-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: clk-apple-nco: Allow and fix module buildingMartin Povišer2-2/+2
Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220312135722.20770-1-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-14Merge 5.17-rc8 into staging-nextGreg Kroah-Hartman6-9/+42
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11clk: clk-apple-nco: Add driver for Apple NCOMartin Povišer3-0/+344
Add a common clock driver for NCO blocks found on Apple SoCs where they are typically the generators of audio clocks. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220208183411.61090-3-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: microchip: Add driver for Microchip PolarFire SoCDaire McNamara5-4/+394
Add support for clock configuration on Microchip PolarFire SoC Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: uniphier: Fix fixed-rate initializationKunihiko Hayashi1-0/+1
Fixed-rate clocks in UniPhier don't have any parent clocks, however, initial data "init.flags" isn't initialized, so it might be determined that there is a parent clock for fixed-rate clock. This sets init.flags to zero as initialization. Cc: <stable@vger.kernel.org> Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: COMMON_CLK_LAN966X should depend on SOC_LAN966Geert Uytterhoeven1-0/+1
The LAN966x Generic Clock Controller is only present on Microchip LAN966x SoCs. Hence add a dependency on SOC_LAN966, to prevent asking the user about this driver when configuring a kernel without LAN966x SoC support. Fixes: 54104ee023333e3b ("clk: lan966x: Add lan966x SoC clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/eb102eae05e5667b9bd342a0c387f7f262d24bda.1645716471.git.geert+renesas@glider.be Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)1-5/+1
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220303014856.2059307-1-chi.minghao@zte.com.cn Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: bcm2835: Remove unused variableMaxime Ripard1-2/+0
Since commit 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers"), the rem variable is still set but no longer used. Remove it. Fixes: 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220222140732.253819-1-maxime@cerno.tech Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driverMiaoqian Lin1-0/+1
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: bcm: rpi: Run some clocks at the minimum rate allowedMaxime Ripard1-0/+37
The core clock and M2MC clocks are shared between some devices (Unicam controllers and the HVS, and the HDMI controllers, respectively) that will have various, varying, requirements depending on their current work load. Since those loads can require a fairly high clock rate in extreme conditions (up to ~600MHz), we can end up running those clocks at their maximum frequency even though we no longer require such a high rate. Fortunately, those devices don't require an exact rate but a minimum rate, and all the drivers are using clk_set_min_rate. Thus, we can just rely on the fact that the clk_request minimum (which is the aggregated minimum of all the clock users) is what we want at all times. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-11-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: bcm: rpi: Set a default minimum rateMaxime Ripard1-0/+26
The M2MC clock provides the state machine clock for both HDMI controllers. However, if no HDMI monitor is plugged in at boot, its clock rate will be left at 0 by the firmware and will make any register access end up in a CPU stall, even though the clock was enabled. We had some code in the HDMI controller to deal with this before, but it makes more sense to have it in the clock driver. Move it there. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-10-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: bcm: rpi: Add variant structureMaxime Ripard1-17/+47
We only export a bunch of firmware clocks, and some of them require special treatment. This has been do so far using some tests on the clock id in various places, but this is fairly hard to extend and doesn't scale very well. Since we'll need some more cases in the next patches, let's switch to a variant structure that defines the behaviour we need to have for a given clock. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-9-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: Add clk_drop_rangeMaxime Ripard1-2/+2
In order to reset the range on a clock, we need to call clk_set_rate_range with a minimum of 0 and a maximum of ULONG_MAX. Since it's fairly inconvenient, let's introduce a clk_drop_range() function that will do just this. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-8-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: Always set the rate on clk_set_range_rateMaxime Ripard2-52/+47
When we change a clock minimum or maximum using clk_set_rate_range(), clk_set_min_rate() or clk_set_max_rate(), the current code will only trigger a new rate change if the rate is outside of the new boundaries. However, a clock driver might want to always keep the clock rate to one of its boundary, for example the minimum to keep the power consumption as low as possible. Since they don't always get called though, clock providers don't have the opportunity to implement this behaviour. Let's trigger a clk_set_rate() on the previous requested rate every time clk_set_rate_range() is called. That way, providers that care about the new boundaries have a chance to adjust the rate, while providers that don't care about those new boundaries will return the same rate than before, which will be ignored by clk_set_rate() and won't result in a new rate change. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-7-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-11clk: Use clamp instead of open-coding our ownMaxime Ripard1-5/+1
The code in clk_set_rate_range() will, if the current rate is outside of the new range, force it to the minimum or maximum. Since it's running under the condition that the rate is either lower than the minimum, or higher than the maximum, this is equivalent to using clamp, while being less readable. Let's switch to using clamp instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-6-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 09:52:56 +0000