summaryrefslogtreecommitdiffstats
path: root/drivers/clk/x86
AgeCommit message (Collapse)AuthorFilesLines
2017-07-18clk: x86: Do not gate clocks enabled by the firmwareCarlo Caione1-0/+7
Read the enable register to determine if the clock is already in use by the firmware. In this case avoid gating the clock. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Fixes: 282a4e4ce5f9 ("platform/x86: Enable Atom PMC platform clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-05-01clk: x86: pmc-atom: Checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
clkdev_hw_create() returns NULLs on error, it doesn't return error pointers. Fixes: 41ee7caf59e1 ("clk: x86: add "mclk" alias for Baytrail/Cherrytrail") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-19clk: x86: add "mclk" alias for Baytrail/CherrytrailPierre-Louis Bossart1-0/+7
Due to timing requirements, TI and Conexant manage the audio reference clock from their ASoC codec drivers using the "mclk" string. This patch adds another lookup for the "pmc_plt_clk_3" clock to avoid Intel-specific tests in those codec drivers and use code as-is. To avoid a leak, clk_add_alias() is not used in this patch. Instead the lookup is created manually as part of the .probe() step and dropped in the .remove() step. "pmc_plt_clk_3" is used exclusively for audio on all known Baytrail/CherryTrail designs and is e.g. routed on the MCLK (pin 26) of the MinnowBoardMAX Turbot LSE connector. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26clk: x86: Add Atom PMC platform clocksIrina Tirdea2-0/+372
The BayTrail and CherryTrail platforms provide platform clocks through their Power Management Controller (PMC). The SoC supports up to 6 clocks (PMC_PLT_CLK[0..5]) with a frequency of either 19.2 MHz (PLL) or 25 MHz (XTAL) for BayTrail and a frequency of 19.2 MHz (XTAL) for CherryTrail. These clocks are available for general system use, where appropriate, and each have Control & Frequency register fields associated with them. Port from legacy by Pierre Bossart, integration in clock framework by Irina Tirdea Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: x86: Remove clkdev.h and clk.h includesStephen Boyd1-2/+0
This driver is a clk provider and not a clk consumer, so remove the clk.h include. Also, drop clkdev.h because there's not clkdev usage here either. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: x86: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-10-20clk: x86: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-06-19ACPI / LPSS: add support for Intel BayTrailMika Westerberg1-3/+1
Intel BayTrail has almost the same Low Power Subsystem than Lynxpoint with few differences. Peripherals are clocked with different speeds (typically lower) and the clock is not always gated. To support this we add possibility to share a common fixed rate clock and make clock gating optional. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-14ACPI / LPSS: register clock device for Lynxpoint DMA properlyRafael J. Wysocki1-4/+11
The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-21ACPI / scan: Add special handler for Intel Lynxpoint LPSS devicesRafael J. Wysocki4-175/+2
Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-01-23clk: x86: add support for Lynxpoint LPSS clocksMika Westerberg4-0/+223
Intel Lynxpoint Low Power Subsystem hosts peripherals like UART, I2C and SPI controllers. For most of these there is a configuration register that allows software to enable and disable the functional clock. Disabling the clock while the peripheral is not used saves power. In order to take advantage of this we add a new clock gate of type lpss_gate that just re-uses the ordinary clk_gate but in addition is able to enumerate the base address register of the device using ACPI. We then create a clock tree that models the Lynxpoint LPSS clocks using these gates and fixed clocks so that we can pass clock rate to the drivers as well. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>