summaryrefslogtreecommitdiffstats
path: root/drivers/clk/tegra
AgeCommit message (Collapse)AuthorFilesLines
2015-10-20Merge tag 'tegra-for-4.4-clk' of ↵Michael Turquette7-113/+163
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.4-rc1 This contains a patch that allows the DFLL to use clock rates higher than 2^31-1 Hz by using the ->determine_rate() operation instead of the ->round_rate() operation. Other than that there's a couple of cleanups in preparation for Tegra210 support.
2015-10-20clk: tegra: Modify tegra_audio_clk_init to accept more pllsRhyland Klein5-11/+56
tegra_audio_clk_init was written expecting a single PLL to be passed in directly. Change this to accept an array which will allow for supporting multiple plls and specifying specific data about them, like their parent, which may change over time. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-20clk: tegra: Update struct tegra_clk_pll_params kerneldocThierry Reding1-3/+15
Benson Leung pointed out that the kerneldoc for this structure has become stale. Update the field descriptions to match the structure content. Reported-by: Benson Leung <bleung@chromium.org> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-20clk: tegra: Fix comments for structure definitionsRhyland Klein1-37/+37
Some fields moved from the tegra_clk_pll struct to the tegra_pll_params struct. Update the struct comments to reflect where the fields really are. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-20clk: tegra: dfll: Monitor code is DEBUG_FS onlyThierry Reding1-50/+49
The monitor code is used with DEBUG_FS only, so move it into the corresponding #ifdef block to avoid potential compiler warnings. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-12clk: tegra: delete unneeded of_node_putJulia Lawall1-3/+1
for_each_child_of_node performs an of_node_put on each iteration, so putting an of_node_put before a continue results in a double put. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_get(child) * of_node_put(child); ... * continue; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-16clk: tegra: dfll: Properly protect OPP listThierry Reding1-1/+7
The OPP list needs to be protected against concurrent accesses. Using simple RCU read locks does the trick and gets rid of the following lockdep warning: =============================== [ INFO: suspicious RCU usage. ] 4.2.0-next-20150908 #1 Not tainted ------------------------------- drivers/base/power/opp.c:460 Missing rcu_read_lock() or dev_opp_list_lock protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by kworker/u8:0/6: #0: ("%s""deferwq"){++++.+}, at: [<c0040d8c>] process_one_work+0x118/0x4bc #1: (deferred_probe_work){+.+.+.}, at: [<c0040d8c>] process_one_work+0x118/0x4bc #2: (&dev->mutex){......}, at: [<c03b8194>] __device_attach+0x20/0x118 #3: (prepare_lock){+.+...}, at: [<c054bc08>] clk_prepare_lock+0x10/0xf8 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.0-next-20150908 #1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: deferwq deferred_probe_work_func [<c001802c>] (unwind_backtrace) from [<c00135a4>] (show_stack+0x10/0x14) [<c00135a4>] (show_stack) from [<c02a8418>] (dump_stack+0x94/0xd4) [<c02a8418>] (dump_stack) from [<c03c6f6c>] (dev_pm_opp_find_freq_ceil+0x108/0x114) [<c03c6f6c>] (dev_pm_opp_find_freq_ceil) from [<c0551a3c>] (dfll_calculate_rate_request+0xb8/0x170) [<c0551a3c>] (dfll_calculate_rate_request) from [<c0551b10>] (dfll_clk_round_rate+0x1c/0x2c) [<c0551b10>] (dfll_clk_round_rate) from [<c054de2c>] (clk_calc_new_rates+0x1b8/0x228) [<c054de2c>] (clk_calc_new_rates) from [<c054e44c>] (clk_core_set_rate_nolock+0x44/0xac) [<c054e44c>] (clk_core_set_rate_nolock) from [<c054e4d8>] (clk_set_rate+0x24/0x34) [<c054e4d8>] (clk_set_rate) from [<c0512460>] (tegra124_cpufreq_probe+0x120/0x230) [<c0512460>] (tegra124_cpufreq_probe) from [<c03b9cbc>] (platform_drv_probe+0x44/0xac) [<c03b9cbc>] (platform_drv_probe) from [<c03b84c8>] (driver_probe_device+0x218/0x304) [<c03b84c8>] (driver_probe_device) from [<c03b69b0>] (bus_for_each_drv+0x60/0x94) [<c03b69b0>] (bus_for_each_drv) from [<c03b8228>] (__device_attach+0xb4/0x118) ata1: SATA link down (SStatus 0 SControl 300) [<c03b8228>] (__device_attach) from [<c03b77c8>] (bus_probe_device+0x88/0x90) [<c03b77c8>] (bus_probe_device) from [<c03b7be8>] (deferred_probe_work_func+0x58/0x8c) [<c03b7be8>] (deferred_probe_work_func) from [<c0040dfc>] (process_one_work+0x188/0x4bc) [<c0040dfc>] (process_one_work) from [<c004117c>] (worker_thread+0x4c/0x4f4) [<c004117c>] (worker_thread) from [<c0047230>] (kthread+0xe4/0xf8) [<c0047230>] (kthread) from [<c000f7d0>] (ret_from_fork+0x14/0x24) Signed-off-by: Thierry Reding <treding@nvidia.com> Fixes: c4fe70ada40f ("clk: tegra: Add closed loop support for the DFLL") [vince.h@nvidia.com: Unlock rcu on error path] Signed-off-by: Vince Hsu <vince.h@nvidia.com> [sboyd@codeaurora.org: Dropped second hunk that nested the rcu read lock unnecessarily] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-15clk: tegra: Unlock top rates for Tegra124 DFLL clockMikko Perttunen2-14/+8
The new determine_rate prototype allows for clock rates exceeding 2^31-1 Hz to be used. Switch the DFLL clock to use determine_rate instead of round_rate and unlock the top rates supported by the Tegra124. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-25clk: tegra: Fix some static checker problemsStephen Boyd2-7/+9
The latest Tegra clk pull had some problems. Fix them. drivers/clk/tegra/clk-tegra124.c:1450:6: warning: symbol 'tegra124_clock_assert_dfll_dvco_reset' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1466:6: warning: symbol 'tegra124_clock_deassert_dfll_dvco_reset' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1476:5: warning: symbol 'tegra124_reset_assert' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1486:5: warning: symbol 'tegra124_reset_deassert' was not declared. Should it be static? drivers/clk/tegra/clk-dfll.c:590 dfll_load_i2c_lut() warn: inconsistent indenting drivers/clk/tegra/clk-dfll.c:1448 dfll_build_i2c_lut() warn: unsigned 'td->i2c_lut[0]' is never less than zero. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-25Merge tag 'tegra-for-4.3-clk' of ↵Stephen Boyd10-9/+2304
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.3-rc1 This contains the DFLL driver needed to implement CPU frequency scaling on Tegra.
2015-08-24clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd1-4/+4
Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: tegra: Convert to clk_hw based provider APIsStephen Boyd2-10/+10
We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd16-16/+2
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-27clk: change clk_ops' ->determine_rate() prototypeBoris Brezillon1-13/+15
Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20clk: tegra: Properly include clk.hStephen Boyd16-16/+2
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. Also add in a clkdev.h include that was missing in a file using clkdev APIs. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-16clk: tegra: Add the DFLL as a possible parent of the cclk_g clockTuomas Tynkkynen1-1/+3
The DFLL clocksource was missing from the list of possible parents for the fast CPU cluster. Add it to the list. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Save/restore CCLKG_BURST_POLICY on suspendTuomas Tynkkynen1-0/+14
Save and restore this register since the LP1 restore assembly routines fiddle with it. Otherwise the CPU would keep running on PLLX after resume from suspend even when DFLL was the original clocksource. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Add Tegra124 DFLL clocksource platform driverTuomas Tynkkynen4-4/+172
Add basic platform driver support for the fast CPU cluster DFLL clocksource found on Tegra124 SoCs. This small driver selects the appropriate Tegra124-specific characterization data and integration code. It relies on the DFLL common code to do most of the work. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> [treding@nvidia.com: move setup code into ->probe()] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Add DFLL DVCO reset control for Tegra124Paul Walmsley1-0/+68
The DVCO present in the DFLL IP block has a separate reset line, exposed via the CAR IP block. This reset line is asserted upon SoC reset. Unless something (such as the DFLL driver) deasserts this line, the DVCO will not oscillate, although reads and writes to the DFLL IP block will complete. Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and saving hours of debugging time. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> [ttynkkynen: ported to tegra124 from tegra114] Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> [mikko.perttunen: ported to special reset callback] Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Introduce ability for SoC-specific reset control callbacksMikko Perttunen2-8/+34
This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Add functions for parsing CVB tablesTuomas Tynkkynen2-0/+207
Tegra CVB tables encode the relationship between operating voltage and optimal frequency as a function of the so-called speedo value. The speedo value is written to the on-chip fuses at the factory, which allows the voltage-frequency operating points to be calculated on an per-chip basis. Add utility functions to parse the Tegra-specific tables and export the voltage-frequency pairs to the generic OPP framework for other drivers to use. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Add closed loop support for the DFLLTuomas Tynkkynen1-3/+663
With closed loop support, the clock rate of the DFLL can be adjusted. The oscillator itself in the DFLL is a free-running oscillator whose rate is directly determined the supply voltage. However, the DFLL module contains logic to compare the DFLL output rate to a fixed reference clock (51 MHz) and make a decision to either lower or raise the DFLL supply voltage. The DFLL module can then autonomously change the supply voltage by communicating with an off-chip PMIC via either I2C or PWM signals. This driver currently supports only I2C. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16clk: tegra: Add library for the DFLL clock source (open-loop mode)Tuomas Tynkkynen3-0/+1150
Add shared code to support the Tegra DFLL clocksource in open-loop mode. This root clocksource is present on the Tegra124 SoCs. The DFLL is the intended primary clock source for the fast CPU cluster. This code is very closely based on a patch by Paul Walmsley from December (http://comments.gmane.org/gmane.linux.ports.tegra/15273), which in turn comes from the internal driver by originally created by Aleksandr Frid <afrid@nvidia.com>. Subsequent patches will add support for closed loop mode and drivers for the Tegra124 fast CPU cluster DFLL devices, which rely on this code. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: Fix hda2codec_2x clock name for Tegra30Marcel Ziswiler1-1/+1
The HDA to codec clock is named hda2codec_2x, so use the proper name in the clock table. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: EMC clock driver depends on EMC driverThierry Reding3-1/+14
The EMC clock driver uses symbols exported by the EMC driver, so it needs the corresponding dependency to avoid build breakage. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: Have EMC clock implement determine_rate()Tomeu Vizoso1-12/+23
As opposed to round_rate(), determine_rate() can take rate constraints into account when choosing the best rate. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: Set the EMC clock as the parent of the MC clockTomeu Vizoso1-12/+1
On Tegra124, as we now have a proper driver for the EMC. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: Add EMC clock driverMikko Perttunen4-2/+535
The driver is currently only tested on Tegra124 Jetson TK1, but should work with other Tegra124 boards, provided that correct EMC tables are provided through the device tree. Older chip models have differing timing change sequences, so they are not currently supported. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [treding@nvidia.com: use more consistent function names] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13clk: tegra: Remove old Tegra124 EMC clockMikko Perttunen1-1/+0
This clock has never been able to do anything. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Use the proper parent for plld_dsiThierry Reding1-6/+8
The current parent, plld_out0, does not exist. The proper name is pll_d_out0. While at it, rename the plld_dsi clock to pll_d_dsi_out to be more consistent with other clock names. Fixes: b270491eb9a0 ("clk: tegra: Define PLLD_DSI and remove dsia(b)_mux") Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Use generic tegra_osc_clk_init() on Tegra114Thierry Reding1-31/+3
There is no reason why Tegra114 cannot use the same generic code to set up the oscillator, clk_m and pll_ref clocks. The only effective change that this causes is that the CLK_SET_PARENT_RATE flag is dropped, but since these clocks are all fixed it is not needed anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Model oscillator as clockThierry Reding4-17/+21
Currently the Tegra clock driver simplifies the clock tree somewhat by taking advantage of the fact that clk_m runs at the same frequency as the oscillator. While that's true on all currently supported SoCs, it does not apply to Tegra210 anymore. On Tegra210 clk_m is typically divided down from the oscillator frequency. To support that setup, add a separate clock for the oscillator that both clk_m and pll_ref derive from. Modify the tegra_osc_clk_init() function to take an additional divider parameter for clk_m. Existing SoCs always pass in 1, whereas Tegra210 will read the divider from a register in the clock & reset controller. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Add peripheral registers for bank YThierry Reding1-0/+14
Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Register the proper number of resetsThierry Reding1-1/+1
The number of resets controls is 32 times the number of peripheral register banks rather than 32 times the number of clocks. This reduces (drastically) the number of reset controls registered from 10080 (315 clocks * 32) to 224 (6 peripheral register banks * 32). This also fixes a potential crash because trying to use any of the excess reset controls (224-10079) would have caused accesses beyond the array bounds of the peripheral register banks definition array. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Fixes: 6d5b988e7dc5 ("clk: tegra: implement a reset driver") Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Remove needless initializationsThierry Reding1-3/+3
The ret variable is often explicitly initialized to 0, but there is no need to do so in many cases because it will immediately be overwritten with the return value from a function. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Use consistent indentationThierry Reding1-10/+10
Some of the .dev_id entries in the devclks table were oddly indented. Make them consistent with the rest of the table. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Various whitespace cleanupsThierry Reding2-1/+2
Make usage of blank lines as separators more consistent. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Enable HDA to HDMI clocks on Tegra124Dylan Reid1-0/+5
Add the clocks used for HDMI audio played through the HDA controller. Initialize the codec clock to 48Mhz and the HDA clock to 102MHz per the TRM. Signed-off-by: Dylan Reid <dgreid@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Fix a bunch of sparse warningsThierry Reding1-1/+1
The second to last parameter of the TEGRA_CLK_PERIPH macro denotes a table and should therefore users should pass in NULL instead of 0. Fixes a bunch of sparse warnings like this: warning: Using plain integer as NULL pointer Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10clk: tegra: Fix typo tabel -> tableThierry Reding1-1/+1
The clock initialization structure is named struct clk_init_table. Update the kerneldoc comment to use the correct name. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-02-18clk: Replace explicit clk assignment with __clk_hw_set_clkJavier Martinez Canillas1-7/+7
The change in the clk API to return a per-user clock instance, moved the clock state to struct clk_core so now the struct clk_hw .core field is used instead of .clk for most operations. So for hardware clocks that needs to share the same clock state, both the .core and .clk pointers have to be assigned but currently only the .clk is set. This leads to NULL pointer dereference when the operations try to access the hw clock .core. For example, the composite clock rate and mux components didn't have a .core set which leads to this error: Unable to handle kernel NULL pointer dereference at virtual address 00000034 pgd = c0004000 [00000034] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-next-20150211-00002-g1fb7f0e1150d #423 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: ee480000 ti: ee488000 task.ti: ee488000 PC is at clk_mux_determine_rate_flags+0x14/0x19c LR is at __clk_mux_determine_rate+0x24/0x2c pc : [<c03a355c>] lr : [<c03a3734>] psr: a0000113 sp : ee489ce8 ip : ee489d84 fp : ee489d84 r10: 0000005c r9 : 00000001 r8 : 016e3600 r7 : 00000000 r6 : 00000000 r5 : ee442200 r4 : ee440c98 r3 : ffffffff r2 : 00000000 r1 : 016e3600 r0 : ee440c98 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee488210) Stack: (0xee489ce8 to 0xee48a000) 9ce0: 00000000 ffffffff 60000113 ee440c98 ee442200 00000000 9d00: 016e3600 ffffffff 00000001 0000005c ee489d84 c03a3734 ee489d80 ee489d84 9d20: 00000000 c048b130 00000400 c03a5798 ee489d80 ee489d84 c0607f60 ffffffea 9d40: 00000001 00000001 ee489d5c c003f844 c06e3340 ee402680 ee440d0c ed935000 9d60: 016e3600 00000003 00000001 0000005c eded3700 c03a11a0 ee489d80 ee489d84 9d80: 016e3600 ee402680 c05b413a eddc9900 016e3600 c03a1228 00000000 ffffffff 9da0: ffffffff eddc9900 016e3600 c03a1c1c ffffffff 016e3600 ed8c6710 c03d6ce4 9dc0: eded3400 00000000 00000000 c03c797c 00000001 0000005c eded3700 eded3700 9de0: 000005e0 00000001 0000005c c03db8ac c06e7e54 c03c8f08 00000000 c06e7e64 9e00: c06b6e74 c06e7f64 000005e0 c06e7df8 c06e5100 00000000 c06e7e6c c06e7f54 9e20: 00000000 00000000 eebd9550 00000000 c06e7da0 c06e7e54 ee7b5010 c06e7da0 9e40: eddc9690 c06e7db4 c06b6e74 00000097 00000000 c03d4398 00000000 ee7b5010 9e60: eebd9550 c06e7da0 00000000 c03db824 ee7b5010 fffffffe c06e7db4 c0299c7c 9e80: ee7b5010 c072a05c 00000000 c0298858 ee7b5010 c06e7db4 ee7b5044 00000000 9ea0: eddc9580 c0298a04 c06e7db4 00000000 c0298978 c02971d4 ee405c78 ee732b40 9ec0: c06e7db4 eded3800 c06d6738 c0298044 c0608300 c06e7db4 00000000 c06e7db4 9ee0: 00000000 c06beb58 c06beb58 c0299024 00000000 c068dd00 00000000 c0008944 9f00: 00000038 c049013c ee462200 c0711920 ee480000 60000113 c06c2cb0 00000000 9f20: 00000000 c06c2cb0 60000113 00000000 ef7fcafc 00000000 c0640194 c00389ec 9f40: c05ec3a8 c063f824 00000006 00000006 c06c2c50 c0696444 00000006 c0696424 9f60: c06ee1c0 c066b588 c06b6e74 00000097 00000000 c066bd44 00000006 00000006 9f80: c066b588 c003d684 00000000 c0481938 00000000 00000000 00000000 00000000 9fa0: 00000000 c0481940 00000000 c000e680 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03a355c>] (clk_mux_determine_rate_flags) from [<c03a3734>] (__clk_mux_determine_rate+0x24/0x2c) [<c03a3734>] (__clk_mux_determine_rate) from [<c03a5798>] (clk_composite_determine_rate+0xbc/0x238) [<c03a5798>] (clk_composite_determine_rate) from [<c03a11a0>] (clk_core_round_rate_nolock+0x5c/0x9c) [<c03a11a0>] (clk_core_round_rate_nolock) from [<c03a1228>] (__clk_round_rate+0x38/0x40) [<c03a1228>] (__clk_round_rate) from [<c03a1c1c>] (clk_round_rate+0x20/0x38) [<c03a1c1c>] (clk_round_rate) from [<c03d6ce4>] (max98090_dai_set_sysclk+0x34/0x118) [<c03d6ce4>] (max98090_dai_set_sysclk) from [<c03c797c>] (snd_soc_dai_set_sysclk+0x38/0x80) [<c03c797c>] (snd_soc_dai_set_sysclk) from [<c03db8ac>] (snow_late_probe+0x24/0x48) [<c03db8ac>] (snow_late_probe) from [<c03c8f08>] (snd_soc_register_card+0xf04/0x1070) [<c03c8f08>] (snd_soc_register_card) from [<c03d4398>] (devm_snd_soc_register_card+0x30/0x64) [<c03d4398>] (devm_snd_soc_register_card) from [<c03db824>] (snow_probe+0x68/0xcc) [<c03db824>] (snow_probe) from [<c0299c7c>] (platform_drv_probe+0x48/0x98) [<c0299c7c>] (platform_drv_probe) from [<c0298858>] (driver_probe_device+0x114/0x234) [<c0298858>] (driver_probe_device) from [<c0298a04>] (__driver_attach+0x8c/0x90) [<c0298a04>] (__driver_attach) from [<c02971d4>] (bus_for_each_dev+0x54/0x88) [<c02971d4>] (bus_for_each_dev) from [<c0298044>] (bus_add_driver+0xd8/0x1cc) [<c0298044>] (bus_add_driver) from [<c0299024>] (driver_register+0x78/0xf4) [<c0299024>] (driver_register) from [<c0008944>] (do_one_initcall+0x80/0x1d0) [<c0008944>] (do_one_initcall) from [<c066bd44>] (kernel_init_freeable+0x10c/0x1d8) [<c066bd44>] (kernel_init_freeable) from [<c0481940>] (kernel_init+0x8/0xe4) [<c0481940>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34) Code: e24dd00c e5907000 e1a08001 e88d000c (e5970034) The changes were made using the following cocinelle semantic patch: @i@ @@ @depends on i@ identifier dst; @@ - dst->clk = hw->clk; + __clk_hw_set_clk(dst, hw); @depends on i@ identifier dst; @@ - dst->hw.clk = hw->clk; + __clk_hw_set_clk(&dst->hw, hw); Fixes: 035a61c314eb3 ("clk: Make clk API return per-user struct clk instances") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-02clk: tegra: Define PLLD_DSI and remove dsia(b)_muxMark Zhang4-26/+24
PLLD is the only parent for DSIA & DSIB on Tegra124 and Tegra132. Besides, BIT 30 in PLLD_MISC register controls the output of DSI clock. So this patch removes "dsia_mux" & "dsib_mux", and create a new clock "plld_dsi" to represent the DSI clock enable control. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com>
2015-02-02clk: tegra: Add support for the Tegra132 CAR IP blockPaul Walmsley3-12/+129
Tegra132 CAR supports almost the same clocks as Tegra124 CAR. This patch mostly deals with the small differences. Since Tegra132 contains many of the same PLL clock sources used on Tegra114 and Tegra124, enable them in drivers/clk/tegra/clk-pll.c when the kernel is configured to include Tegra132 support. This patch is based on several patches from others: 1. a patch from Peter De Schrijver: http://lkml.iu.edu/hypermail/linux/kernel/1407.1/06094.html 2. a patch from Bill Huang ("clk: tegra: enable cclk_g at boot on Tegra132"), and 3. a patch from Allen Martin ("clk: Enable tegra clock driver for tegra132"). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Bill Huang <bilhuang@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org>
2015-02-02clk: tegra: make tegra_clocks_apply_init_table() arch_initcallPeter De Schrijver1-2/+5
tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2015-02-02clk: tegra: Fix order of arguments in WARNTomeu Vizoso1-4/+4
As previously the names of the present clock and its parent were swapped. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2015-02-02clk: tegra124: Add init data for dsi lp clocksSean Paul1-0/+2
Set the parent of the dsi lp clocks to pll_p and the rate to 68MHz. The default parent is clk_m and rate is 12MHz, this is too slow to receive data from the peripheral. Per NVidia HW engineers, the optimal rate is 70MHz, but 68MHz will suffice. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2015-02-02clk: tegra: SDMMC controllers are on APBAndrew Bresticker1-8/+8
Since the SDMMC controller registers are accessed via the APB, the APB must be flushed before gating the SDMMC clocks to prevent register accesses to the SDMMC controllers after their clocks are gated. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-11-26clk: tegra: Implement memory-controller clockThierry Reding6-4/+40
The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-09-18clk: tegra: Make clock initialization more robustTomeu Vizoso1-2/+7
Don't abort clock initialization if we cannot match an entry in tegra_clk_init_table to a valid entry in the clk array. Also log a corresponding error message. This was discovered when testing a patch that removed the EMC clock from tegra124_clks but left a mention in tegra_clk_init_table. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-09-18clk: tegra124: Add PLL_M_UD and PLL_C_UD clocksMikko Perttunen1-0/+8
These clocks are used as parents for some EMC timings. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 13:33:48 +0000