summaryrefslogtreecommitdiffstats
path: root/drivers/clk/sunxi-ng
AgeCommit message (Collapse)AuthorFilesLines
2020-02-12clk: sunxi-ng: sun8i-de2: Sort structuresJernej Skrabec1-10/+10
V3s quirks are not in right place. Move it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: Add R40 specific quirksJernej Skrabec1-0/+14
R40 is actually very similar to A64, but it doesn't have mixer1 reset. This means it's clocks and resets combination is unique and R40 specific quirks are needed. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83TJernej Skrabec1-1/+11
A83T structures don't have clocks and reset for rotation core. Add them. Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: Don't reuse A83T resetsJernej Skrabec1-7/+16
Currently, V3s and H3 reuse A83T reset structure. However, A83T contains additional core for rotation, which is not present in V3s and H3. Make new reset structure for H3 and let V3s reuse it. A83T reset structure will be amended in subsequent commit. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate coreJernej Skrabec1-56/+1
DE3 documentation regarding presence of rotate core in H6 is a bit confusing. Register descriptions mention bits for enabling rotate core clocks and reset, but general overview doesn't list it as feature of H6 display engine, BSP kernel doesn't support it and there is no interrupt listed for it. Manual poking registers also didn't reveal presence of rotate core. Let's assume there isn't any rotate core on H6 present and remove related clocks. With that done, structures are same as those for H5, so just reuse H5 structure. Fixes: 56808da9f97f ("clk: sunxi-ng: Add support for H6 DE3 clocks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64Jernej Skrabec1-3/+42
A64 has rotation core which needs clocks and reset. Because there is no appropriate structures available, make a separate, A64 specific structures. Fixes: cf4881c12935 ("clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12clk: sunxi-ng: sun8i-de2: Split out H5 definitionsJernej Skrabec1-1/+17
H5 has less clocks and resets than A64. Currently that's not obvious because A64 is missing rotation core related clocks and reset. Split out H5 definition. A64 structures will be fixed in subsequent commit. Note that this patch depends on commit 19368d99746e ("clk: sunxi-ng: add support for Allwinner H3 DE2 CCU") for the H3 clock list. Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-11clk: sunxi-ng: a64: Export MBUS clockJernej Skrabec1-4/+0
MBUS clock will be referenced in MBUS controller node. Export it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds5-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-04clk: sunxi: a23/a33: Export the MIPI PLLMaxime Ripard1-1/+3
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04clk: sunxi: a31: Export the MIPI PLLMaxime Ripard1-1/+3
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04clk: sunxi-ng: a64: export CLK_CPUX clock for DVFSVasily Khoruzhick1-1/+0
Export CLK_CPUX so we can reference it in CPU node. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04clk: sunxi-ng: add mux and pll notifiers for A64 CPU clockIcenowy Zheng1-1/+27
The A64 PLL_CPU clock has the same instability if some factor changed without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, H3. Add the mux and pll notifiers for A64 CPU clock to workaround the problem. Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-03clk: sunxi-ng: r40: Export MBUS clockChen-Yu Tsai1-4/+0
The MBUS clock needs to be referenced in the MBUS device node. Export it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent orderSamuel Holland1-2/+2
According to the BSP source code, both the AR100 and R_APB2 clocks have PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre- divider used for PLL_PERIPH0 should be changed to index 3 to match. This was verified by running a rough benchmark on the AR100 with various clock settings: | mux | pre-divider | iterations/second | clock source | |=====|=============|===================|==============| | 0 | 0 | 19033 (stable) | osc24M | | 2 | 5 | 11466 (unstable) | iosc/osc16M | | 2 | 17 | 11422 (unstable) | iosc/osc16M | | 3 | 5 | 85338 (stable) | pll-periph0 | | 3 | 17 | 27167 (stable) | pll-periph0 | The relative performance numbers all match up (with pll-periph0 running at its default 600MHz). Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: h6-r: Simplify R_APB1 clock definitionSamuel Holland1-11/+1
Like the APB0 clock on previous chips, this is a simple single-parent clock with an M divider. Use the equivalent helper macro instead of writing out the whole clock description manually. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: sun8i-r: Fix divider on APB0 clockSamuel Holland1-18/+3
According to the BSP source code, the APB0 clock on the H3 and H5 has a normal M divider, not a power-of-two divider. This matches the hardware in the A83T (as described in both the BSP source code and the manual). Since the A83T and H3/A64 clocks are actually the same, we can merge the definitions. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-18clk: sunxi-ng: r40: Allow setting parent rate for external clock outputsChen-Yu Tsai1-2/+4
One of the uses of the external clock outputs is to provide a stable 32768 Hz clock signal to WiFi and Bluetooth chips. On the R40, the RTC has an internal RC oscillator that is muxed with the external crystal. Allow setting the parent rate for the external clock outputs so that requests for 32768 Hz get passed to the RTC's clock driver to mux in the external crystal if it isn't already muxed correctly. Fixes: cd030a78f7aa ("clk: sunxi-ng: support R40 SoC") Fixes: 01a7ea763fc4 ("clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output") Cc: <stable@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.Yunhao Tian2-4/+2
The hws field of sun8i_v3s_hw_clks has only 74 members. However, the number specified by CLK_NUMBER is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation fault that is not always reproducible. This patch fixes the problem by specifying correct clock number. Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn> [Maxime: Also remove the CLK_NUMBER definition] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-01Merge tag 'clk-for-linus' of ↵Linus Torvalds2-11/+16
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-05clk: sunxi-ng: h3: Export MBUS clockJernej Skrabec1-4/+0
MBUS clock will be referenced in MBUS controller node. Export it. Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-10-29clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18Colin Ian King1-1/+1
The zero'ing of bits 16 and 18 is incorrect. Currently the code is masking with the bitwise-and of BIT(16) & BIT(18) which is 0, so the updated value for val is always zero. Fix this by bitwise and-ing value with the correct mask that will zero bits 16 and 18. Addresses-Coverity: (" Suspicious &= or |= constant expression") Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-02clk: sunxi-ng: h6: Allow GPU to change parent rateJernej Skrabec1-1/+1
GPU PLL was designed with dynamic frequency switching in mind so driver can adjust rate based on the GPU load. Allow GPU clock to change parent rate (GPU PLL is the only possible parent of GPU clock). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-30clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLLJernej Skrabec1-6/+15
Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-19Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' ↵Stephen Boyd4-14/+255
into clk-next - Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-08-21clk: sunxi-ng: h6: Allow I2S to change parent rateJernej Skrabec1-4/+4
I2S doesn't work if parent rate couldn't be change. Difference between wanted and actual rate is too big. Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-16clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registeredStephen Boyd1-2/+3
The implementation of clk_hw_get_name() relies on the clk_core associated with the clk_hw pointer existing. If of_clk_hw_register() fails, there isn't a clk_core created yet, so calling clk_hw_get_name() here fails. Extract the name first so we can print it later. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-12clk: sunxi-ng: v3s: add Allwinner V3 supportIcenowy Zheng2-3/+227
Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-12clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocksIcenowy Zheng1-0/+3
The MMC2 clock slices are currently not defined in V3s CCU driver, which makes MMC2 not working. Fix this issue. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-22clk: sunxi-ng: v3s: add the missing PLL_DDR1Icenowy Zheng2-6/+19
The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds16-221/+397
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-24Merge tag 'sunxi-ng-parent-rewrite-part-1-take-2' of ↵Stephen Boyd16-220/+396
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner sunxi-ng clk driver parent relation rewrite part 1 - take 2 from Chen-Yu Tsai: "The first part of ongoing work to convert the sunxi-ng clk driver from using global clock name strings to describe clk parenting, to having direct struct clk_hw pointers, or local names based on clock-names from the device tree binding. This is based on Stephen Boyd's recent work allowing clk drivers to specify clk parents using struct clk_hw * or parsing DT phandles in the clk node. This series can be split into a few major parts: 1) The first patch is a small fix for clk debugfs representation. 2) A bunch of CLK_HW_INIT_* helper macros are added. These cover the situations I encountered, or assume I will encounter, such as single internal (struct clk_hw *) parent, single DT (struct clk_parent_data .fw_name), multiple internal parents, and multiple mixed (internal + DT) parents. A special variant for just an internal single parent is added, CLK_HW_INIT_HWS, which lets the driver share the singular list, instead of having the compiler create a compound literal every time. It might even make sense to only keep this variant. 3) A bunch of CLK_FIXED_FACTOR_* helper macros are added. The rationale is the same as the single parent CLK_HW_INIT_* helpers. 4) Bulk conversion of CLK_FIXED_FACTOR to use local parent references, either struct clk_hw * or DT .fw_name types, whichever the hardware requires. 5) The beginning of SUNXI_CCU_GATE conversion to local parent references. This part is not done. They are included as justification and examples for the shared list of clk parents case." * tag 'sunxi-ng-parent-rewrite-part-1-take-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (25 commits) clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE clk: sunxi-ng: gate: Add macros for referencing local clock parents clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTOR clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_* clk: sunxi-ng: switch to of_clk_hw_register() for registering clks clk: fixed-factor: Add CLK_FIXED_FACTOR_FW_NAME for DT clock-names parent clk: fixed-factor: Add CLK_FIXED_FACTOR_HWS which takes list of struct clk_hw * ...
2019-06-22clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATEChen-Yu Tsai1-14/+23
With the new clk parenting code and SUNXI_CCU_GATE macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_HWS as the parent clock is internal to this clock unit. To avoid duplication of clock definitions, we fix up the parent reference for A83T in the A83T init function. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATEChen-Yu Tsai1-12/+20
With the new clk parenting code and SUNXI_CCU_GATE macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_DATA to specify the parent clock. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: gate: Add macros for referencing local clock parentsChen-Yu Tsai1-0/+53
With the new clk parenting code, clk_init_data was expanded to include .parent_hws, for clk drivers to directly reference parents by clk_hw, and .parent_data, for clk drivers to specify parents using a combination of device tree clock-names, pointers to struct clk_hw, device tree clocks, and/or fallback global clock names. Add four new macros: - SUNXI_CCU_GATE_HW, that can take a struct clk_hw pointer, instead of a string, as its parent. - SUNXI_CCU_GATE_FW that takes a string to match a clock-names entry in the device tree to specify the clock parent. - SUNXI_CCU_GATE_HWS that takes an array of struct clk_hw * as its parent. This allows the array to be shared with other clk declarations. - SUNXI_CCU_GATE_DATA that takes an array of struct clk_parent_data * as its parent. This allows the array to be shared with other clk declarations. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-1/+1
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-25/+44
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-15/+26
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-1/+1
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-17/+29
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-10/+19
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-14/+25
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-12/+22
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTORChen-Yu Tsai1-14/+25
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_*Chen-Yu Tsai1-40/+25
With the new clk parenting code and CLK_HW_INIT_* macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_HW_INIT_* definitions to describe parents using either struct clk_hw pointers or clock-names from the device tree binding. For the AR100, this also allows us to merge the generic AR100 and the A83T specific one, which only differed in the global clock names for their parent clocks. The device tree bindings used the same name specifiers. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18clk: sunxi-ng: switch to of_clk_hw_register() for registering clksChen-Yu Tsai1-1/+1
Commit 89a5ddcc799d ("clk: Add of_clk_hw_register() API for early clk drivers") introduces a new API for registering clks, which allows the user to directly specify a device node, even if there is no struct device attached to it. The device node is used for local DT clock-names matching. Switch to of_clk_hw_register() so that local DT clock-names matching works. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>