summaryrefslogtreecommitdiffstats
path: root/drivers/clk/st
AgeCommit message (Collapse)AuthorFilesLines
2016-12-08clk: st: clk-flexgen: Unmap region obtained by of_iomapArvind Yadav1-1/+4
Free memory mapping, if probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Handle clk synchronous mode for video clocksGabriel Fernandez1-2/+35
This patch configures the semi-synchronous mode of the video clocks of clkgenD2. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Add clock propagation for audio clocksGabriel Fernandez1-1/+25
This patch allows fine tuning of the quads FS for audio clocks accuracy. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Add fs660c32 synthesizer algorithmGabriel Fernandez1-69/+111
Use an algorithm instead of a table to compute clocks for fs660c32 synthesizer. During a video playback we need to adjust audio & video frequencies. A table can't cover all HDMI resolutions and audio adjustment. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Simplify clock binding of STiH4xx platformsGabriel Fernandez3-77/+55
This patch reworks the clock binding to avoid too much detail in DT. Now we have only compatible string per type of clock (remark from Rob https://lkml.org/lkml/2016/5/25/492) Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Remove stih415-416 clock supportGabriel Fernandez3-1404/+1
STiH415 and STiH416 platforms are no longer used. these platforms will be deprecated for the next kernel. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-30clk: st: clkgen-pll: Detect critical clocksLee Jones1-10/+17
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-30clk: st: clkgen-fsyn: Detect critical clocksLee Jones1-3/+7
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-30clk: st: clk-flexgen: Detect critical clocksLee Jones1-1/+3
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. While we're at it, reduce the coverage of the flex_flags variable, since it's only really used in a single for() loop. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26clk: st: Remove impossible check for of_clk_get_parent_count() < 0Stephen Boyd2-4/+4
The checks for < 0 are impossible now that of_clk_get_parent_count() returns an unsigned int. Simplify the code and update the types. Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: st: avoid uninitialized variable useArnd Bergmann1-2/+6
My previous patch fixed some warnings about printing a couple of variables that are always uninitialized in quadfs_pll_fs660c32_set_rate(), but I now got a warning that only shows up in some configurations (i.e. without gcc -Os) about the params.ndiv being used uninitialized in the error case: drivers/clk/st/clkgen-fsyn.c: In function 'quadfs_pll_fs660c32_set_rate': drivers/clk/st/clkgen-fsyn.c:584:75: warning: 'params.ndiv' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clkgen-fsyn.c:574:16: note: 'params.ndiv' was declared here This changes the error handling so we bail for invalid arguments rather than continuing with uninitialized data. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: move the common clock's to_clk_*(_hw) macros to clk-provider.hGeliang Tang1-5/+4
to_clk_*(_hw) macros have been repeatedly defined in many places. This patch moves all the to_clk_*(_hw) definitions in the common clock framework to public header clk-provider.h, and drop the local definitions. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-20clk: st: avoid uninitialized variable useArnd Bergmann1-8/+9
quadfs_pll_fs660c32_round_rate prints a few structure members that are never initialized, and also doesn't print the only one it cares about. We get a gcc warning about the ones that are printed: clk/st/clkgen-fsyn.c:560:93: warning: 'params.sdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.mdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.pe' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.nsdiv' may be used uninitialized in this function This changes the code to no longer print uninitialized data, and for good measure it also prints the ndiv member that is being set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5f7aa9071e93 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-08drivers: clk: st: Correct the pll-type for A9 for stih418Gabriel Fernandez1-0/+194
Add support for new PLL-type for stih418 A9-PLL. Currently the 407_A9_PLL type being used, it is corrected with this patch 4600c28 PLL allows to reach higher frequencies so its programming algorithm is extended. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-08drivers: clk: st: PLL rate change implementation for DVFSGabriel Fernandez3-10/+216
Change A9 PLL rate, as per requirement from the cpufreq framework, for DVFS. For rate change, the A9 clock needs to be temporarily sourced from PLL external to A9 and then sourced back to A9-PLL Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-08drivers: clk: st: Support for enable/disable in Clockgen PLLsGabriel Fernandez1-1/+59
The patch adds support for enable/disable of the Clockgen PLLs. clkgen_pll_enable/clkgen_pll_disable added as generic function for all PLLs. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: st: fix handling result of of_property_count_stringsAndrzej Hajda1-3/+4
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-17drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_xGabriel Fernandez2-10/+10
Use a generic name for this kind of PLL Correction in dts files are already done here: commit 5eb26c605909 ("ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd4-16/+16
Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: Convert __clk_get_flags() to clk_hw_get_flags()Stephen Boyd1-1/+1
Mostly converted with the following snippet: @@ struct clk_hw *E; @@ -__clk_get_flags(E->clk) +clk_hw_get_flags(E) Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd4-0/+4
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-28clk: st: make use of of_clk_parent_fill helper functionDinh Nguyen2-9/+4
Use of_clk_parent_fill to fill in the parent clock names' array. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by Gabriel Fernandez <gabriel.fernandez@st.com> Cc: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20clk: st: Include clk.hStephen Boyd4-0/+4
This clock provider uses the consumer API, so include clk.h explicitly. Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-13clk: st: Fix error paths and allocation styleStephen Boyd1-38/+45
The error paths in this file leak memory and mappings and test for pointers being valid after dereferencing them. Fix these problems and properly free resources on errors. Fix some stylistic things too like using sizeof(*ptr) and fitting more code on a single line. Note that we don't unregister clocks here. That needs a clk_composite_unregister() API that we don't have right now. Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07drivers: clk: st: Incorrect register offset used for lock_statusPankaj Dev1-1/+1
Incorrect register offset used for sthi407 clockgenC Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: 51306d56ba81 ("clk: st: STiH407: Support for clockgenC0") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Fix mux bit-setting for Cortex A9 clocksGabriel Fernandez1-1/+1
This patch fixes the mux bit-setting for ClockgenA9. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: 13e6f2da1ddf ("clk: st: STiH407: Support for A9 MUX Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocksPankaj Dev4-6/+8
Add the CLK_GET_RATE_NOCACHE flag to all the clocks with recalc ops, so that they reflect Hw rate after CPS wake-up when a clk_get_rate() is called Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Fix flexgen lock initGiuseppe Cavallaro1-0/+2
While proving lock, the following warning happens and it is fixed after initializing lock in the setup function INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.27-02861-g39df285-dirty #33 [<c00154ac>] (unwind_backtrace+0x0/0xf4) from [<c0011b50>] (show_stack+0x10/0x14) [<c0011b50>] (show_stack+0x10/0x14) from [<c00689ac>] (__lock_acquire+0x900/0xb14) [<c00689ac>] (__lock_acquire+0x900/0xb14) from [<c0069394>] (lock_acquire+0x68/0x7c) [<c0069394>] (lock_acquire+0x68/0x7c) from [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<c0381e6c>] (clk_gate_endisable+0x28/0x88) [<c0381e6c>] (clk_gate_endisable+0x28/0x88) from [<c0381ee0>] (clk_gate_enable+0xc/0x14) [<c0381ee0>] (clk_gate_enable+0xc/0x14) from [<c0386c68>] (flexgen_enable+0x28/0x40) [<c0386c68>] (flexgen_enable+0x28/0x40) from [<c037f260>] (__clk_enable+0x5c/0x9c) [<c037f260>] (__clk_enable+0x5c/0x9c) from [<c037f558>] (clk_enable+0x18/0x2c) [<c037f558>] (clk_enable+0x18/0x2c) from [<c064a1dc>] (st_lpc_of_register+0xc0/0x248) [<c064a1dc>] (st_lpc_of_register+0xc0/0x248) from [<c0649e44>] (clocksource_of_init+0x34/0x58) [<c0649e44>] (clocksource_of_init+0x34/0x58) from [<c0637ddc>] (sti_timer_init+0x10/0x18) [<c0637ddc>] (sti_timer_init+0x10/0x18) from [<c06343f8>] (time_init+0x20/0x30) [<c06343f8>] (time_init+0x20/0x30) from [<c0632984>] (start_kernel+0x20c/0x2e8) [<c0632984>] (start_kernel+0x20c/0x2e8) from [<40008074>] (0x40008074) Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: b116517055b7 ("clk: st: STiH407: Support for Flexgen Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Fix FSYN channel valuesGabriel Fernandez1-2/+2
This patch fixes the value for disabling the FSYN channel clock. The 'is_enabled' returned value is also fixed. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Remove unused codeGabriel Fernandez1-4/+0
Remove this duplicated code due to a bad copy / paste. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04clk: st: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven2-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14clk: st: Silence sparse warningsStephen Boyd4-17/+17
drivers/clk/st/clkgen-mux.c:134:4: warning: symbol 'clkgena_divmux_get_parent' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:171:15: warning: symbol 'clkgena_divmux_recalc_rate' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:218:12: warning: symbol 'clk_register_genamux' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:388:13: warning: symbol 'st_of_clkgena_divmux_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:488:13: warning: symbol 'st_of_clkgena_prediv_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:625:13: warning: symbol 'st_of_clkgen_mux_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:702:13: warning: symbol 'st_of_clkgen_vcc_setup' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:273:15: warning: symbol 'recalc_stm_pll800c65' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:300:15: warning: symbol 'recalc_stm_pll1600c65' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:324:15: warning: symbol 'recalc_stm_pll3200c32' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:346:15: warning: symbol 'recalc_stm_pll1200c32' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:565:19: warning: incorrect type in assignment (different address spaces) drivers/clk/st/clkgen-pll.c:565:19: expected void [noderef] <asn:2>*reg drivers/clk/st/clkgen-pll.c:565:19: got void * drivers/clk/st/clkgen-pll.c:576:18: warning: incorrect type in assignment (different address spaces) drivers/clk/st/clkgen-pll.c:576:18: expected void [noderef] <asn:2>*reg drivers/clk/st/clkgen-pll.c:576:18: got void * drivers/clk/st/clkgen-pll.c:693:53: warning: incorrect type in argument 2 (different address spaces) drivers/clk/st/clkgen-pll.c:693:53: expected void *[noderef] <asn:2>reg drivers/clk/st/clkgen-pll.c:693:53: got void [noderef] <asn:2>*[assigned] pll_base drivers/clk/st/clkgen-fsyn.c:495:5: warning: symbol 'clk_fs660c32_vco_get_rate' was not declared. Should it be static? drivers/clk/st/clkgen-fsyn.c:522:5: warning: symbol 'clk_fs660c32_vco_get_params' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:119:15: warning: symbol 'flexgen_recalc_rate' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:177:12: warning: symbol 'clk_register_flexgen' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:263:13: warning: symbol 'st_of_flexgen_setup' was not declared. Should it be static? Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-01clk: constify of_device_id arrayFabian Frederick3-7/+7
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) __initdata updated to __initconst for static const struct of_device_id ti_clkdm_match_table[] Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-02-18clk: Replace explicit clk assignment with __clk_hw_set_clkJavier Martinez Canillas2-17/+17
The change in the clk API to return a per-user clock instance, moved the clock state to struct clk_core so now the struct clk_hw .core field is used instead of .clk for most operations. So for hardware clocks that needs to share the same clock state, both the .core and .clk pointers have to be assigned but currently only the .clk is set. This leads to NULL pointer dereference when the operations try to access the hw clock .core. For example, the composite clock rate and mux components didn't have a .core set which leads to this error: Unable to handle kernel NULL pointer dereference at virtual address 00000034 pgd = c0004000 [00000034] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-next-20150211-00002-g1fb7f0e1150d #423 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: ee480000 ti: ee488000 task.ti: ee488000 PC is at clk_mux_determine_rate_flags+0x14/0x19c LR is at __clk_mux_determine_rate+0x24/0x2c pc : [<c03a355c>] lr : [<c03a3734>] psr: a0000113 sp : ee489ce8 ip : ee489d84 fp : ee489d84 r10: 0000005c r9 : 00000001 r8 : 016e3600 r7 : 00000000 r6 : 00000000 r5 : ee442200 r4 : ee440c98 r3 : ffffffff r2 : 00000000 r1 : 016e3600 r0 : ee440c98 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee488210) Stack: (0xee489ce8 to 0xee48a000) 9ce0: 00000000 ffffffff 60000113 ee440c98 ee442200 00000000 9d00: 016e3600 ffffffff 00000001 0000005c ee489d84 c03a3734 ee489d80 ee489d84 9d20: 00000000 c048b130 00000400 c03a5798 ee489d80 ee489d84 c0607f60 ffffffea 9d40: 00000001 00000001 ee489d5c c003f844 c06e3340 ee402680 ee440d0c ed935000 9d60: 016e3600 00000003 00000001 0000005c eded3700 c03a11a0 ee489d80 ee489d84 9d80: 016e3600 ee402680 c05b413a eddc9900 016e3600 c03a1228 00000000 ffffffff 9da0: ffffffff eddc9900 016e3600 c03a1c1c ffffffff 016e3600 ed8c6710 c03d6ce4 9dc0: eded3400 00000000 00000000 c03c797c 00000001 0000005c eded3700 eded3700 9de0: 000005e0 00000001 0000005c c03db8ac c06e7e54 c03c8f08 00000000 c06e7e64 9e00: c06b6e74 c06e7f64 000005e0 c06e7df8 c06e5100 00000000 c06e7e6c c06e7f54 9e20: 00000000 00000000 eebd9550 00000000 c06e7da0 c06e7e54 ee7b5010 c06e7da0 9e40: eddc9690 c06e7db4 c06b6e74 00000097 00000000 c03d4398 00000000 ee7b5010 9e60: eebd9550 c06e7da0 00000000 c03db824 ee7b5010 fffffffe c06e7db4 c0299c7c 9e80: ee7b5010 c072a05c 00000000 c0298858 ee7b5010 c06e7db4 ee7b5044 00000000 9ea0: eddc9580 c0298a04 c06e7db4 00000000 c0298978 c02971d4 ee405c78 ee732b40 9ec0: c06e7db4 eded3800 c06d6738 c0298044 c0608300 c06e7db4 00000000 c06e7db4 9ee0: 00000000 c06beb58 c06beb58 c0299024 00000000 c068dd00 00000000 c0008944 9f00: 00000038 c049013c ee462200 c0711920 ee480000 60000113 c06c2cb0 00000000 9f20: 00000000 c06c2cb0 60000113 00000000 ef7fcafc 00000000 c0640194 c00389ec 9f40: c05ec3a8 c063f824 00000006 00000006 c06c2c50 c0696444 00000006 c0696424 9f60: c06ee1c0 c066b588 c06b6e74 00000097 00000000 c066bd44 00000006 00000006 9f80: c066b588 c003d684 00000000 c0481938 00000000 00000000 00000000 00000000 9fa0: 00000000 c0481940 00000000 c000e680 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03a355c>] (clk_mux_determine_rate_flags) from [<c03a3734>] (__clk_mux_determine_rate+0x24/0x2c) [<c03a3734>] (__clk_mux_determine_rate) from [<c03a5798>] (clk_composite_determine_rate+0xbc/0x238) [<c03a5798>] (clk_composite_determine_rate) from [<c03a11a0>] (clk_core_round_rate_nolock+0x5c/0x9c) [<c03a11a0>] (clk_core_round_rate_nolock) from [<c03a1228>] (__clk_round_rate+0x38/0x40) [<c03a1228>] (__clk_round_rate) from [<c03a1c1c>] (clk_round_rate+0x20/0x38) [<c03a1c1c>] (clk_round_rate) from [<c03d6ce4>] (max98090_dai_set_sysclk+0x34/0x118) [<c03d6ce4>] (max98090_dai_set_sysclk) from [<c03c797c>] (snd_soc_dai_set_sysclk+0x38/0x80) [<c03c797c>] (snd_soc_dai_set_sysclk) from [<c03db8ac>] (snow_late_probe+0x24/0x48) [<c03db8ac>] (snow_late_probe) from [<c03c8f08>] (snd_soc_register_card+0xf04/0x1070) [<c03c8f08>] (snd_soc_register_card) from [<c03d4398>] (devm_snd_soc_register_card+0x30/0x64) [<c03d4398>] (devm_snd_soc_register_card) from [<c03db824>] (snow_probe+0x68/0xcc) [<c03db824>] (snow_probe) from [<c0299c7c>] (platform_drv_probe+0x48/0x98) [<c0299c7c>] (platform_drv_probe) from [<c0298858>] (driver_probe_device+0x114/0x234) [<c0298858>] (driver_probe_device) from [<c0298a04>] (__driver_attach+0x8c/0x90) [<c0298a04>] (__driver_attach) from [<c02971d4>] (bus_for_each_dev+0x54/0x88) [<c02971d4>] (bus_for_each_dev) from [<c0298044>] (bus_add_driver+0xd8/0x1cc) [<c0298044>] (bus_add_driver) from [<c0299024>] (driver_register+0x78/0xf4) [<c0299024>] (driver_register) from [<c0008944>] (do_one_initcall+0x80/0x1d0) [<c0008944>] (do_one_initcall) from [<c066bd44>] (kernel_init_freeable+0x10c/0x1d8) [<c066bd44>] (kernel_init_freeable) from [<c0481940>] (kernel_init+0x8/0xe4) [<c0481940>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34) Code: e24dd00c e5907000 e1a08001 e88d000c (e5970034) The changes were made using the following cocinelle semantic patch: @i@ @@ @depends on i@ identifier dst; @@ - dst->clk = hw->clk; + __clk_hw_set_clk(dst, hw); @depends on i@ identifier dst; @@ - dst->hw.clk = hw->clk; + __clk_hw_set_clk(&dst->hw, hw); Fixes: 035a61c314eb3 ("clk: Make clk API return per-user struct clk instances") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-20clk: st: STiH410: Fix pdiv and fdiv divisor when setting ratePeter Griffin1-4/+15
Debugging eMMC on upstream kernels it has been noticed that when the targetpack configures MMC0 clock to 200Mhz (required to switch to HS200) then everything works OK. However if the kernel sets the clock rate using clk_set_rate, then the eMMC card initialisation fails with timeouts. Lower clock speeds (the default being 50Mhz) work ok, but they we fail to get good eMMC transfer rates. Looking through the vendor kernel clock driver reveals Giuseppe had already fixed this issue, but the patch hasn't made its way upstream. The issue is fixed by changing the logic to manage the pdiv and fdiv divisors used for setting the rate inside the flexgen driver code. Pdiv is mainly targeted for low freq results, while fdiv should be used for divs =< 64. The other way can lead to 'duty cycle' issues. I have changed the original patch to keep the original behaviour in cases where the div is >64 which matches the original comment and patch description more closely. Although no clocks appear to hit this case currently when booting an upstream kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-07-28clk: st: Use round to closest divider flagGabriel FERNANDEZ1-1/+2
This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify the divider has to round to closest div. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: Update frequency tables for fs660c32 and fs432c65Gabriel FERNANDEZ1-8/+59
This patch extend the range of possible frequencies of the fs432c65 and fs660c32 Quad frequency synthesizers. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for clockgenA9Gabriel FERNANDEZ1-0/+16
The patch added support for DT registration of ClockGenA9 It includes c32 type PLL. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for clockgenD0/D2/D3Gabriel FERNANDEZ1-0/+46
The patch added support for ClockGenD0/D2/D3 It includes one 660 Quadfs. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for clockgenC0Gabriel FERNANDEZ2-0/+83
The patch added support for DT registration of ClockGenC0 It includes 2 c32 type PLL and a 660 Quadfs. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: Add quadfs reset handlingGabriel FERNANDEZ1-0/+5
This patch adds the support of quadfs reset handling. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: Add polarity bit indicationGabriel FERNANDEZ1-5/+7
This patch introduces polarity indication for pll power up bit and for standby bit in order to have same code between stih416 and stih407 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for clockgenA0Gabriel FERNANDEZ1-0/+16
The patch added support for DT registration of ClockGenA0 It includes c32 type PLL. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for A9 MUX ClocksGabriel FERNANDEZ1-0/+9
The patch supports the A9-mux clocks used by ClockGenA9 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: STiH407: Support for Flexgen ClocksGabriel FERNANDEZ2-1/+332
This patch is the Flexgen implementation reusing as much as possible of Common Clock Framework functions. The idea is to have an instance of "struct flexgen" per output clock. It represents the clock cross bar (by a mux element), and the pre and final dividers (using dividers and gates elements). Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: Remove uncessary (void *) castGabriel FERNANDEZ1-4/+4
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: use static const for clkgen_pll_data tablesGabriel FERNANDEZ1-16/+14
converts clkgen_pll_data tables into static const Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-28clk: st: use static const for stm_fs tablesGabriel FERNANDEZ1-17/+17
converts stm_fs tables into static const Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-28clk: st: Terminate of match tableStephen Boyd1-0/+1
Failure to terminate this match table can lead to boot failures depending on where the compiler places the match table. Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-23clk: st: Fix memory leakValentin Ilie1-1/+3
When it fails to allocate div, gate should be free'd before return Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>