summaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas
AgeCommit message (Collapse)AuthorFilesLines
2016-04-28clk: renesas: cpg-mssr: Use always-on governor for Clock DomainGeert Uytterhoeven1-1/+1
As a pure Clock Domain does not have the concept of powering the domain itself, the CPG/MSTP driver does not provide power_off() and power_on() callbacks. However, the genpd core may still perform a dummy power down, causing /sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's status being "off-0". Use the always-on governor to make sure the domain is never powered down, and always shows up as "on" in pm_genpd_summary. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-28clk: renesas: cpg-mssr: Postpone call to pm_genpd_init()Geert Uytterhoeven1-1/+1
All local setup of the generic_pm_domain structure should have been completed before calling pm_genpd_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-28clk: renesas: mstp: Use always-on governor for Clock DomainGeert Uytterhoeven1-1/+1
As a pure Clock Domain does not have the concept of powering the domain itself, the CPG/MSTP driver does not provide power_off() and power_on() callbacks. However, the genpd core may still perform a dummy power down, causing /sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's status being "off-0". Use the always-on governor to make sure the domain is never powered down, and always shows up as "on" in pm_genpd_summary. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-28clk: renesas: mstp: Postpone call to pm_genpd_init()Geert Uytterhoeven1-2/+1
All local setup of the generic_pm_domain structure should have been completed before calling pm_genpd_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-26clk: renesas: r8a7795: Add VIN clocksNiklas Söderlund1-0/+8
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-26clk: renesas: r8a7795: Add CSI2 clocksNiklas Söderlund1-0/+5
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-20clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev()Geert Uytterhoeven1-6/+12
The R-Car SYSC PM Domain driver has to power manage devices in power areas using clocks. To reuse code and to share knowledge of clocks suitable for power management, this is ideally done through the existing cpg_mssr_attach_dev() and cpg_mssr_detach_dev() callbacks. Hence these callbacks can no longer rely on their "domain" parameter pointing to the CPG/MSSR Clock Domain. To handle this, keep a pointer to the clock domain in a static variable. cpg_mssr_attach_dev() has to support probe deferral, as the R-Car SYSC PM Domain may be initialized, and devices may be added to it, before the CPG/MSSR Clock Domain is initialized. Dummy callbacks are provided for the case where CPG/MSTP support is not included, so the rcar-sysc driver won't have to care about this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-04-20clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP supportGeert Uytterhoeven2-12/+30
Currently the decision whether to build the renesas-cpg-mssr and clk-mstp drivers is handled by Makefile logic. However, the rcar-sysc driver will need to know whether CPG/MSSR and/or CPG/MSTP support are available or not. To avoid having to duplicate this logic, move it to Kconfig. Provide non-visible CLK_RENESAS_CPG_MSSR and CLK_RENESAS_CPG_MSTP Kconfig symbols, which can be used by both Makefiles and C code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-04-07clk: renesas: mstp: Clarify cpg_mstp_{at,de}tach_dev() domain parameterGeert Uytterhoeven1-2/+2
Make it clear that the "domain" parameter of the cpg_mstp_attach_dev() and cpg_mstp_detach_dev() functions is not used. The cpg_mstp_attach_dev() and cpg_mstp_detach_dev() callbacks are not only used by the CPG/MSTP Clock Domain driver, but also by the R-Mobile SYSC PM Domain driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-07clk: renesas: cpg-mssr: Drop check for CONFIG_PM_GENERIC_DOMAINS_OFGeert Uytterhoeven1-11/+0
As of commit 71d076ceb245f0d9 ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with a CPG/MSSR block. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-04-07clk: renesas: mstp: Drop check for CONFIG_PM_GENERIC_DOMAINS_OFGeert Uytterhoeven1-3/+0
As of commit 71d076ceb245f0d9 ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with MSTP clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-04-06clk: renesas: r8a7795: add RWDT clockWolfram Sang1-0/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-06clk: renesas: r8a7795: add R clkWolfram Sang1-0/+16
R can select between two parents. We deal with it like this: During initialization, check if EXTALR is populated. If so, use it for R. If not, use R_Internal. clk_mux doesn't help here because we don't want to switch parents depending on the clock rate. The clock rate (and source) should stay constant for the watchdog, so I think a setup like this during initialization makes sense. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-06clk: renesas: r8a7795: add OSC and RINT clocksWolfram Sang1-0/+5
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-06clk: renesas: cpg-mssr: add generic support for read-only DIV6 clocksWolfram Sang2-6/+15
Gen3 has two clocks (OSC and R) which look like a DIV6 clock but their divider value is read-only and depends on MD pins at bootup. Add support for such clocks by reading the value and adding a fixed clock. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-29clk: renesas: r8a7795: make SD clk definition specific for GEN3Wolfram Sang2-7/+7
About SD clocks: The clock type is Gen3 specific, the callbacks are all Gen3 specific; I think the clock definition should also be Gen3 specific and not in the general header file. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-29clk: renesas: r8a7795: add PWM clockUlrich Hecht1-0/+1
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-15clk: renesas: div6: use RENESAS for #defineSimon Horman1-2/+2
Name the #define guarding compilation of this header __RENESAS_CLK_DIV6_H__ rather than __SHMOBILE_CLK_DIV6_H__. This is a follow-up to renaming the directory in which this file lives from shmobile to renesas which is in turn part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-15clk: renesas: Rename header file renesas.hSimon Horman8-8/+8
This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Along with the above mentioned Kconfig changes it seems appropriate to also rename files. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-03clk: renesas: move drivers to renesas directorySimon Horman15-0/+3670
This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Along with the above mentioned Kconfig changes it seems appropriate to also rename directories that only hold drivers for such SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-10 13:27:00 +0000