summaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas
AgeCommit message (Collapse)AuthorFilesLines
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds1-1/+39
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-19clk: renesas: r9a06g032: Probe possible childrenMiquel Raynal1-0/+5
The clock controller device on r9a06g032 takes all the memory range that is described as being a system controller. This range contains many different (unrelated?) registers besides the ones belonging to the clock controller, that can necessitate to be accessed from other peripherals. For instance, the dmamux registers are there. The dmamux "device" will be described as a child node of the clock/system controller node, which means we need the top device driver (the clock controller driver in this case) to populate its children manually. In case of error when populating the children, we do not fail the probe on purpose to keep the clk driver up and running. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-7-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19clk: renesas: r9a06g032: Export function to set dmamuxMiquel Raynal1-1/+34
The dmamux register is located within the system controller. Without syscon, we need an extra helper in order to give write access to this register to a dmamux driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-5-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-06clk: renesas: r9a09g011: Add eth clock and reset entriesPhil Edworthy1-5/+9
Add ethernet clock/reset entries to CPG driver. Note that the AXI and CHI clocks are both enabled and disabled using the same register bit. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220504145454.71287-2-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06clk: renesas: Add RZ/V2M support using the rzg2l driverPhil Edworthy5-0/+181
The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have any CLK_MON registers. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add support for RZ/V2M reset monitor regPhil Edworthy2-3/+17
The RZ/V2M doesn't have a matching set of reset monitor regs for each reset reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a single bit per module. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Make use of CLK_MON registers optionalPhil Edworthy4-1/+16
The RZ/V2M SoC doesn't use CLK_MON registers, so make them optional. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-9-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Set HIWORD mask for all mux and dividersPhil Edworthy3-31/+19
All of the muxes and dividers that can be modified require the HIWORD flags, so make the macros set them. It won't affect read only muxes and dividers. This will make the clock tables a little easier to read, particularly for new SoCs coming. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-8-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add read only versions of the clk macrosPhil Edworthy3-6/+12
This just makes the clk tables easier to read. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-7-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macroPhil Edworthy3-22/+19
We only ever use ARRAY_SIZE() to populate the number of parents, so move this into the macro to always detect it automatically. This also makes the tables of clocks a little simpler. Similarly for the DEF_SD_MUX macro. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-6-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Fix OSTM1 module clock nameGeert Uytterhoeven1-1/+1
Fix a typo in the name of the "ostm1_pclk" clock. This change has no run-time impact. Fixes: 161450134ae9bab3 ("clk: renesas: r9a07g044: Add OSTM clock and reset entries") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e0eff1f57378ec29d0d3f1a7bdd7e380583f736b.1651494871.git.geert+renesas@glider.be
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for ADCBiju Das1-0/+6
Add clock and reset entries for ADC block in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add TSU clock and reset entryBiju Das1-0/+6
Add TSU clock and reset entry to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add RSPI clock and reset entriesBiju Das1-0/+9
Add RSPI{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus ↵Biju Das1-0/+18
Controller Add clock and reset entries for SPI Multi I/O Bus Controller. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add DSI clock and reset entriesBiju Das1-1/+16
Add DSI clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-10-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add LCDC clock and reset entriesBiju Das1-1/+8
Add LCDC clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-9-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M4 Clock supportBiju Das1-1/+18
Add support for M4 clock which is sourced from pll2_533_div2. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-8-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M3 Clock supportBiju Das1-1/+4
Add support for M3 clock which is sourced from DSI divider connected to PLL5_4 mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-7-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks supportBiju Das1-1/+4
Add support for {M2, M2_DIV2} clocks which is sourced from pll3_533. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M1 clock supportBiju Das1-1/+10
Add support for M1 clock which is sourced from FOUTPOSTDIV. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add DSI divider clk supportBiju Das2-0/+136
M3 clock is sourced from DSI Divider (DSIDIVA * DSIDIVB) This patch add support for DSI divider clk by combining DSIDIVA and DSIDIVB. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add PLL5_4 clk mux supportBiju Das2-0/+103
Add PLL5_4 clk mux support to select clock from clock sources FOUTPOSTDIV and FOUT1PH0. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add FOUTPOSTDIV clk supportBiju Das2-0/+235
PLL5 generates FOUTPOSTDIV clk and is sourced by LCDC/DSI modules. The FOUTPOSTDIV is connected to PLL5_4 MUX. Video clock is sourced from DSI divider which is connected to PLL5_4 MUX. This patch adds support for generating FOUTPOSTDIV clk. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-29clk: renesas: cpg-mssr: Add support for R-Car V4HYoshihiro Shimoda5-0/+231
Initial CPG support for R-Car V4H (r8a779g0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220428135058.597586-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-29clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4Yoshihiro Shimoda4-16/+24
R-Car V4H (r8a779g0) has PLL4 so that add CLK_TYPE_GEN4_PLL4. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220425064201.459633-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add WDT clock and reset entriesBiju Das1-0/+10
Add WDT{0,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-7-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add OSTM clock and reset entriesBiju Das1-0/+9
Add OSTM{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add clock and reset entries for CANFDBiju Das1-0/+5
Add clock and reset entries for CANFD in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add USB clocks/resetsBiju Das1-0/+12
Add clock/reset entries for USB PHY control, USB2.0 host and device. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add SSIF-2 clock and reset entriesBiju Das1-0/+20
Add SSIF-2{0,1,2,3} clock and reset entries in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add I2C clocks/resetsBiju Das1-0/+12
Add I2C{0,1,2,3} clock and reset entries. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a06g032: Fix the RTC hclock descriptionMiquel Raynal1-1/+1
It needs to be un-gated, but also a reset must be released and an idle flag should also be disabled. The driver already supports all these operations, so update the description of the RTC hclock to fit these requirements. Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220421090016.79517-3-miquel.raynal@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-25clk: renesas: r8a779f0: Add UFS clockYoshihiro Shimoda1-0/+1
Add the module clock used by the UFS host controller on the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220411124932.3765571-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add SDHI clock and reset entriesBiju Das1-0/+35
Add SDHI{0,1} mux, clock and reset entries to CPG driver Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add GbEthernet clock/resetBiju Das1-0/+10
Add ETH{0,1} clock/reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add ethernet clock sourcesBiju Das1-0/+13
Ethernet reference clock can be sourced from PLL5_500 or PLL6. Add support for ethernet source clock selection using SEL_PLL_6_2 mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add GPIO clock and reset entriesBiju Das1-0/+5
Add GPIO clock and reset entries in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: Add support for RZ/G2UL SoCBiju Das5-1/+171
The clock structure for RZ/G2UL is almost identical to RZ/G2L SoC with fewer IP blocks. The IP blocks such as WDT1, GPT, H264, GPU and POEG are not present on RZ/G2UL. This patch adds minimal clock and reset entries required to boot the system on Renesas RZ/G2UL SMARC EVK and binds it with the RZ/G2L CPG core driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220412161314.13800-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: Move RPC core clocksGeert Uytterhoeven12-57/+51
The RPC and RPCD2 core clocks were added to the sections for internal core clocks, while they are core clock outputs, visible from DT. Move them to the correct sections. Rename the ".rpc" clock on R-Car S4 to "rpc". Fixup nearby whitespace to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a938b938f00939b9206d7fbaba78e2ef09915f5f.1649681891.git.geert+renesas@glider.be
2022-04-13clk: renesas: rzg2l: Simplify multiplication/shift logicGeert Uytterhoeven1-1/+1
"a * (1 << b)" == "a << b". No change in generated code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/71e1cf2e30fb2d7966fc8ec6bab23eb7e24aa1c4.1645460687.git.geert+renesas@glider.be
2022-04-11clk: renesas: r8a77995: Add RPC clocksGeert Uytterhoeven2-1/+13
Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car D3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock. The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car E3, but uses a different pre-divider for the PLL0 parent. Add a new macro to describe it, reusing the existing clock type for R-Car E3. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/3fd1e886b7737cd0e199603bae81d01be9dcf3aa.1648546700.git.geert+renesas@glider.be
2022-04-11clk: renesas: r8a77990: Add RPC clocksGeert Uytterhoeven1-0/+9
Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car E3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/3295013f27f1e4b8fbf3f79b950d65157ea95ef2.1648546700.git.geert+renesas@glider.be
2022-04-04clk: renesas: rzg2l: Remove unused notifiersPhil Edworthy1-2/+0
notifiers is not used. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220304143241.8523-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-02-22clk: renesas: r8a779f0: Add PFC clockGeert Uytterhoeven1-0/+1
Add the module clock used by the Pin Function (PFC/GPIO) controller on the Renesas R-Car S4-8 (R8A779F0) SoC. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/4ef3d3dfe714ad75112e4886efea0b66e40a33bc.1645457502.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Add I2C clocksGeert Uytterhoeven1-0/+6
Add the module clocks used by the I2C Bus Interfaces on the Renesas R-Car S4-8 (R8A779F0) SoC. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/e4dcee5f6f521dccd7ac7f2fb6c86cfe4a24d032.1643898820.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Add WDT clockGeert Uytterhoeven1-0/+9
Add the module clock used by the RCLK Watchdog Timer (RWDT) on the Renesas R-Car S4-8 (r8a779f0) SoC. Mark it as a critical clock, to ensure uninterrupted watchdog operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/8d9b280065a663f2cf31db7b21a010aa781a0af1.1642525158.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Fix RSW2 clock dividerGeert Uytterhoeven1-1/+1
According to Section 8.1.2 Figure 8.1.1 ("Block Diagram of CPG"), Note 22 ("RSW2 divider"), and Table 8.1.4d ("Lists of CPG clocks generated from CPGMA1"), the RSwitch2 and PCI Express clock is generated from PLL5 by dividing by two, followed by the RSW2 divider. As PLL5 runs at 3200 MHz, and RSW2 is fixed to 320 MHz, the RSW2 divider must be 5. Correct the parent and the fixed divider. Fixes: 24aaff6a6ce4c4de ("clk: renesas: cpg-mssr: Add support for R-Car S4-8") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d6a406f31e6f02f892e0253f4e8a9a2f68fd652e.1641566003.git.geert+renesas@glider.be
2022-02-10clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoCBiju Das5-191/+250
The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC. The only difference being that RZ/V2L has additional registers to control clocks and resets for the DRP-AI block. Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to take care of the DRP-AI clocks/resets. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220205084006.7142-1-biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20220209203411.22332-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-24clk: renesas: r8a779a0: Add CANFD module clockUlrich Hecht1-0/+1
Adds "canfd0" to mod clocks. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20220111162231.10390-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 18:09:34 +0000