summaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas
AgeCommit message (Collapse)AuthorFilesLines
2019-11-01clk: renesas: r8a7796: Add R8A77961 CPG/MSSR supportGeert Uytterhoeven4-4/+32
Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock Pulse Generator / Module Standby and Software Reset driver. R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for both SoCs to share a driver. R-Car M3-W+ lacks a few modules, so their clocks must be nullified. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122941.12342-5-geert+renesas@glider.be
2019-11-01clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960Geert Uytterhoeven3-4/+4
Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_CLK_R8A77961. Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the SoC configuration symbol. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122941.12342-4-geert+renesas@glider.be
2019-11-01clk: renesas: r8a77965: Remove superfluous semicolonGeert Uytterhoeven1-1/+1
There is no need to terminate a function with a semicolon. Remove it. Reported-by: Biju Das <biju.das@bp.renesas.com> Fixes: 7ce36da900c0a2ff ("clk: renesas: cpg-mssr: Add support for R-Car M3-N") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191016150711.30305-1-geert+renesas@glider.be
2019-10-21clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate()Geert Uytterhoeven1-7/+12
As the .round_rate() callback returns a long clock rate, it cannot return clock rates that do not fit in signed long, but do fit in unsigned long. Hence switch the SD clocks on R-Car Gen3 from the old .round_rate() callback to the newer .determine_rate() callback, which does not suffer from this limitation. This includes implementing range checking. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190830134515.11925-9-geert+renesas@glider.be
2019-10-21clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate()Geert Uytterhoeven1-8/+14
As the .round_rate() callback returns a long clock rate, it cannot return clock rates that do not fit in signed long, but do fit in unsigned long. Hence switch the Z clocks on R-Car Gen3 from the old .round_rate() callback to the newer .determine_rate() callback, which does not suffer from this limitation. This includes implementing range checking. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190830134515.11925-8-geert+renesas@glider.be
2019-10-21clk: renesas: rcar-gen2: Switch Z clock to .determine_rate()Geert Uytterhoeven1-10/+13
As the .round_rate() callback returns a long clock rate, it cannot return clock rates that do not fit in signed long, but do fit in unsigned long. Hence switch the Z clock on R-Car Gen2 from the old .round_rate() callback to the newer .determine_rate() callback, which does not suffer from this limitation. This includes implementing range checking. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190830134515.11925-7-geert+renesas@glider.be
2019-10-07clk: renesas: r8a774b1: Add TMU clockBiju Das1-0/+5
This patch adds the TMU clocks to the R8A774B1 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1569249688-15821-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01clk: renesas: cpg-mssr: Add r8a774b1 supportBiju Das5-0/+335
Add RZ/G2N (R8A774B1) Clock Pulse Generator / Module Standby and Software Reset support. Based on the Table 8.4d of "RZ/G Series, 2nd Generation User's Manual: Hardware (Rev. 0.80, May 2019)". Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1568881036-4404-7-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate()Geert Uytterhoeven1-4/+8
cpg_sd_clock_round_rate() really needs the best rate, not the best divider. Hence change the iteration to find the former, and get rid of the final division. Add an out-of-range rate check while at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20190830134515.11925-6-geert+renesas@glider.be
2019-10-01clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div()Geert Uytterhoeven1-14/+5
cpg_sd_clock_round_rate() is the sole caller of cpg_sd_clock_calc_div(), hence absorb the latter into the former. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20190830134515.11925-5-geert+renesas@glider.be
2019-10-01clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate()Geert Uytterhoeven1-3/+3
The .set_rate() callback for the SD clocks is always called with a valid clock rate, returned by .round_rate(). Hence there is no need to iterate through the divider table twice: once to repeat the work done by .round_rate(), and a second time to find the corresponding divider entry. Just iterate once, looking for the divider that matches the passed clock rate. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20190830134515.11925-4-geert+renesas@glider.be
2019-10-01clk: renesas: rcar-gen3: Improve arithmetic divisionsGeert Uytterhoeven1-2/+2
- Use div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms, - Use div_u64() for 64-by-32 divisions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20190830134515.11925-3-geert+renesas@glider.be
2019-10-01clk: renesas: rcar-gen2: Improve arithmetic divisionsGeert Uytterhoeven1-3/+3
- Use div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms, - Prefer ULL constant suffixes over casts to u64, - Prioritize multiplication over division, to increase accuracy. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20190830134515.11925-2-geert+renesas@glider.be
2019-10-01clk: renesas: Remove R-Car Gen2 legacy DT clock supportGeert Uytterhoeven3-478/+0
As of commit 362b334b17943d84 ("ARM: dts: r8a7791: Convert to new CPG/MSSR bindings"), all upstream R-Car Gen2 device tree source files use the unified "Renesas Clock Pulse Generator / Module Standby and Software Reset" DT bindings. Hence remove backward compatibility with old R-Car Gen2 device trees describing a hierarchical representation of the various CPG and MSTP clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190830133615.11274-1-geert+renesas@glider.be
2019-10-01clk: renesas: mstp: Delete unnecessary kfree() in cpg_mstp_clocks_init()Markus Elfring1-3/+1
A NULL pointer would be passed to a call of the function kfree() directly after a call of the function kzalloc() failed at one place. Remove this superfluous function call. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Link: https://lore.kernel.org/r/e66b822b-026b-29cc-e461-6334aafd1d30@web.de Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-09-20Merge tag 'clk-for-linus' of ↵Linus Torvalds4-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-08-23clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domainGeert Uytterhoeven1-1/+2
The CPG/MSSR Clock Domain driver does not implement the generic_pm_domain.power_{on,off}() callbacks, as the domain itself cannot be powered down. Hence the domain should be marked as always-on by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain code from considering it for power-off, and doing unnessary processing. Note that this only affects RZ/A2 SoCs. On R-Car Gen2 and Gen3 SoCs, the R-Car SYSC driver handles Clock Domain creation, and offloads only device attachment/detachment to the CPG/MSSR driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-23clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domainGeert Uytterhoeven1-1/+2
The RZ/N1 Clock Domain driver does not implement the generic_pm_domain.power_{on,off}() callbacks, as the domain itself cannot be powered down. Hence the domain should be marked as always-on by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain code from considering it for power-off, and doing unnessary processing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-23clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domainGeert Uytterhoeven1-1/+2
The CPG/MSTP Clock Domain driver does not implement the generic_pm_domain.power_{on,off}() callbacks, as the domain itself cannot be powered down. Hence the domain should be marked as always-on by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain code from considering it for power-off, and doing unnessary processing. This also gets rid of a boot warning when the Clock Domain contains an IRQ-safe device, e.g. on RZ/A1: sh_mtu2 fcff0000.timer: PM domain cpg_clocks will not be powered off Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-08clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helperGeert Uytterhoeven1-3/+1
Use the devm_platform_ioremap_resource() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2019-07-22clk: renesas: cpg-mssr: Fix reset control race conditionGeert Uytterhoeven1-14/+2
The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com> Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds10-120/+205
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-12scripts/spelling.txt: add spelling fix for prohibitedChris Paterson1-1/+1
Misspelling 'prohibited' is quite common in the real world, although surprisingly not so much in the Linux Kernel. In addition to fixing the typo we may as well add it to the spelling checker. Also adding the present participle (prohibiting). Link: http://lkml.kernel.org/r/20190514153341.22540-1-chris.paterson2@renesas.com Fixes: 5bf2fbbef50c ("clk: renesas: cpg-mssr: Add r8a77470 support") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-20clk: renesas: cpg-mssr: Use [] to denote a flexible array memberGeert Uytterhoeven1-1/+1
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Combine driver-private and clock array allocationGeert Uytterhoeven1-14/+6
Make cpg_mssr_priv.clks[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the driver-private structure and array of available clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: mstp: Combine group-private and clock array allocationGeert Uytterhoeven1-6/+6
Make mstp_clock_group.clks[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the group-private structure and array of module clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: div6: Combine clock-private and parent array allocationGeert Uytterhoeven1-14/+5
Make div6_clock.parents[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the clock-private structure and array of parent clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Update kerneldoc for struct cpg_mssr_privGeert Uytterhoeven1-1/+2
New fields were added, but kerneldoc was forgotten, or inserted at the wrong place. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-18clk: renesas: r8a774a1: Add TMU clockFabrizio Castro1-0/+5
This patch adds the TMU clocks to the R8A774A1 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77995: Add CMM clocksJacopo Mondi1-0/+2
Add clock definitions for CMM units on Renesas R-Car D3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77990: Add CMM clocksJacopo Mondi1-0/+2
Add clock definitions for CMM units on Renesas R-Car E3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77965: Add CMM clocksJacopo Mondi1-0/+3
Add clock definitions for CMM units on Renesas R-Car M3-N. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a7795: Add CMM clocksJacopo Mondi1-0/+4
Add clock definitions for CMM units on Renesas R-Car H3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-04clk: renesas: r9a06g032: Add clock domain supportGareth Williams1-69/+158
There are several clocks on the r9a06g032 which are currently not enabled in their drivers that can be delegated to clock domain system for power management. Therefore add support for clock domain functionality to the r9a06g032 clock driver. Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-04clk: renesas: mstp: Remove error messages on out-of-memory conditionsGeert Uytterhoeven1-6/+2
pm_clk_create() and pm_clk_add_clk() can fail only when running out of memory. Hence there is no need to print error messages on failure, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-06-04clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditionsGeert Uytterhoeven1-6/+2
pm_clk_create() and pm_clk_add_clk() can fail only when running out of memory. Hence there is no need to print error messages on failure, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-06-04clk: renesas: cpg-mssr: Use genpd of_node instead of local copyGeert Uytterhoeven1-3/+1
Since commit 6a0ae73d95956f7e ("PM / Domain: Add support to parse domain's OPP table"), of_genpd_add_provider_simple() fills in the dev.of_node field in the generic_pm_domain structure. Hence cpg_mssr_is_pm_clk() can use that instead of its own copy in the driver-private cpg_mssr_clk_domain structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-05-21clk: renesas: r8a7796: Add CMM clocksJacopo Mondi1-0/+3
Add clock definitions for CMM units on Renesas R-Car Gen3 M3-W. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-21clk: renesas: r8a779{5|6|65}: Add TPU clockCao Van Dong3-0/+3
This patch adds the TPU clock on the R-Car r8a7795/r8a7796/r8a77965 SoCs. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd8-0/+8
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd3-6/+6
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-01clk: renesas: Use the correct style for SPDX License IdentifierNishad Kamdar3-6/+6
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Renesas Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: renesas: rcar-gen3: Remove unused variableStephen Boyd1-1/+0
This variable is no longer used and the compiler rightly complains that it should be removed. Drop it to silence the following: drivers/clk/renesas/rcar-gen3-cpg.c: In function 'cpg_sd_clk_register': drivers/clk/renesas/rcar-gen3-cpg.c:386:15: warning: unused variable 'i' [-Wunused-variable] unsigned int i; Cc: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: b953eaaeb58e ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-04clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return valueTakeshi Kihara1-16/+14
cpg_sd_clock_round_rate() may return an unsupported clock rate for the requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the clock rate acquired by cpg_sd_clock_round_rate(), an error may occur. This is not conform the clk API design. This patch fixes that by making sure cpg_sd_clock_calc_div() considers only the division values defined in cpg_sd_div_table[]. With this fix, the cpg_sd_clock_round_rate() always return a support clock rate. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: r8a77980: Fix RPC-IF module clock's parentSergei Shtylyov1-1/+1
Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise... Fixes: 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Rename DRIF clocksTakeshi Kihara4-34/+35
According to the R-Car Gen3 Hardware Manual Errata for Rev. 1.50 of Feb 12, 2019, the DRIF clocks have been renamed as follows: DRIF0 to DRIF00 DRIF1 to DRIF01 DRIF2 to DRIF10 DRIF3 to DRIF11 DRIF4 to DRIF20 DRIF5 to DRIF21 DRIF6 to DRIF30 DRIF7 to DRIF31 Therefore, this patch renames the DRIF clocks from DRIFn to DRIFmm. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of Audio-DMACTakeshi Kihara7-11/+11
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of SYS-DMACTakeshi Kihara4-8/+8
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of HS-USBKazuya Mizuguchi6-7/+7
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the HS-USB module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCIKazuya Mizuguchi6-12/+12
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 05:47:33 +0000