summaryrefslogtreecommitdiffstats
path: root/drivers/clk/meson
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09clk: meson: add gen_clkJerome Brunet4-3/+135
GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definitionJerome Brunet1-1/+0
HHI_GEN_CLK_CTNL is defined twice, just remove the duplicate definition Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson-axg: add clocks required by pcie driverYixun Lan2-1/+150
Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: remove unused clk-audio-divider driverJerome Brunet3-119/+1
clk-audio-divider is no longer used, we can remove it. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: stop rate propagation for audio clocksJerome Brunet1-9/+7
It is actually a lot easier to setup the PLL with carefully chosen rates than relying on CCF clock propagation for this audio use case. This way, we can make sure we will always be able to provide the common audio clock rates, while having the PLL in the optimal operating range. For this, we stop the rate propagation at the mux picking the PLL and let it round to the closest matching PLL. Doing so, we can use the generic divider for the i2s clock. clk-audio-divider is no longer required. It was a (poor) attempt to use CCF rate propagation while making sure the PLL rate would be high enough to work with audio use cases. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: axg: add the audio clock controller driverJerome Brunet4-0/+982
The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: add axg audio sclk divider driverJerome Brunet3-1/+252
Add a driver to control the clock divider found in the sample clock generator of the axg audio clock controller. The sclk divider accumulates specific features which make the generic divider unsuitable to control it: - zero based divider (div = val + 1), but zero value gates the clock, so minimum divider value is 2. - lrclk variant may adjust the duty cycle depending the divider value and the 'hi' value. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: add triple phase clock driverJerome Brunet4-0/+94
Add a driver to control the output of the sample clock generator found in the axg audio clock controller. The goal of this driver is to coherently control the phase provided to the different element using the sample clock generator. This simplify the usage of the sample clock generator a lot, without comprising the ability of the SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: add clk-phase clock driverJerome Brunet3-0/+72
Add a driver based meson clk-regmap to control clock phase on amlogic SoCs Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: clean-up meson clock configurationJerome Brunet1-9/+5
Clean the dependencies in meson clock Kconfig. CLK_AMLOGIC should actually select CLK_REGMAP_MESON which it uses. Also, each platform should select CLK_AMLOGIC, so everything is properly turned on when the platform Kconfig enable each configuration flag Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-09clk: meson: remove obsolete register accessJerome Brunet2-69/+4
The legacy method to access the hhi register space is not longer used. We can safely drop it now. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-21clk: meson: audio-divider is one basedJerome Brunet1-1/+1
The audio divider is one based. This offset was mistakenly dropped from recalc_rate() when migrating to clk_regmap. Fixes: 88a4e1283681 ("clk: meson: migrate the audio divider clock to clk_regmap") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-19clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICALNeil Armstrong1-0/+1
On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor seems to be dependent on the FCLK_DIV2 to be operationnal. The issue occurred since v4.17-rc1 by freezing the kernel boot when the 'schedutil' cpufreq governor was selected as default : [ 12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version domain-0 init dvfs: 4 [ 12.087757] hctosys: unable to open rtc device (rtc0) [ 12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' But when disabling the MMC driver, the boot finished but cpufreq failed to change the CPU frequency : [ 12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5 A bisect between v4.16 and v4.16-rc1 gave 05f814402d61 ("clk: meson: add fdiv clock gates") to be the first bad commit. This commit added support for the missing clock gates before the fixed PLL fixed dividers (FCLK_DIVx) and the clock framework basically disabled all the unused fixed dividers, thus disabled a critical clock path for the SCPI Co-Processor. This patch simply sets the FCLK_DIV2 gate as critical to ensure nobody can disable it. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [few corrections in the commit description] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds20-309/+586
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-05-21clk: meson: axg: let mpll clocks round closestJerome Brunet1-0/+4
Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-21clk: meson: mpll: add round closest supportJerome Brunet2-5/+22
Allow the mpll driver to round the requested rate up if CLK_MESON_MPLL_ROUND_CLOSEST is set and it provides a rate closer to the requested rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-21clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICALMartin Blumenstingl1-0/+7
Until commit 05f814402d6174 ("clk: meson: add fdiv clock gates") we relied on the bootloader to enable the fclk_div clock gates. It turns out that our clock tree is incomplete at least on Meson8b (tested with an Odroid-C1, which uses an RGMII PHY) because after the mentioned commit Ethernet is not working anymore (no RX/TX activity can be seen). At the same time Ethernet was still working on Meson8m2 with a RMII PHY. Testing has shown that as soon as "fclk_div2" is disabled Ethernet stops working on Odroid-C1. Unfortunately it's currently not clear what the Ethernet controller IP block uses the fclk_div2 clock for. Mark the clock as CLK_IS_CRITICAL to keep it enabled (as it's already enabled by most bootloaders by default, which is why we didn't notice it before). Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates") Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-18clk: meson: use SPDX license identifiers consistentlyJerome Brunet13-238/+20
Replace every license notices in drivers/clk/meson by SPDX license identifiers, as described in license-rules.rst Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: drop CLK_SET_RATE_PARENT flagYixun Lan1-1/+1
The clk81 is not expected to be changed, so drop this flag. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson-axg: Add AO Clock and Reset controller driverQiufang Dai4-1/+195
Adds a Clock and Reset controller driver for the Always-On part of the Amlogic Meson-AXG SoC. Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: aoclk: refactor common code into dedicated fileYixun Lan6-62/+160
We try to refactor the common code into one dedicated file, while preparing to add new Meson-AXG aoclk driver, this would help us to better share the code by all aoclk drivers. Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: migrate to devm_of_clk_add_hw_provider APIYixun Lan1-1/+1
There is a protential memory leak, as of_clk_del_provider is never called if of_clk_add_hw_provider has been executed. Fix this by using devm variant API. Fixes: f8c11f79912d ("clk: meson: Add GXBB AO Clock and Reset controller driver") Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: gxbb: add the video decoder clocksMaxime Jourdan2-1/+119
Add the SEL/DIV/GATE for VDEC_1 and VDEC_HEVC. Signed-off-by: Maxime Jourdan <maxi.jourdan@wanadoo.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-15clk: meson: meson8b: add support for the NAND clocksMartin Blumenstingl2-1/+58
This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) | (1<<8) | 0 - 160MHz = (0<<9) | (1<<8) | 3) - 182MHz = (3<<9) | (1<<8) | 1) - 212MHz = (1<<9) | (1<<8) | 3) - 255MHz = (2<<9) | (1<<8) | 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-01Merge tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson ↵Stephen Boyd2-4/+3
into clk-fixes Pull meson clk fixes from Jerome Brunet: - fix typos in two meson8 clock names - remove unused clock ops declaration * tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops
2018-04-25clk: meson: meson8b: fix meson8b_cpu_clk parent clock nameMartin Blumenstingl1-1/+2
meson8b_cpu_clk has two parent clocks: - meson8b_xtal - meson8b_cpu_scale_out_sel The name of the "xtal" clock parent is specified correctly. However, there is a typo in the name of the second parent clock. The meson8b_cpu_scale_out_sel definition uses the name "cpu_scale_out_sel" (which matches the name from the datasheet). However, the mux parent definition uses the name "cpu_out_sel" which does not match any existing clock. Fixes: 251b6fd38bcb9c ("clk: meson: rework meson8b cpu clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-25clk: meson: meson8b: fix meson8b_fclk_div3_div clock nameMartin Blumenstingl1-1/+1
The names of all fclk divider gate clocks follow the naming schema "fclk_divN" and the name of all fclk fixed dividers follow the naming schema "fclk_divN_div". There's one exception to this rule: meson8b_fclk_div3_div's name is "fclk_div_div3". It's child clock meson8b_fclk_div3 however references it as "fclk_div3_div" (following the naming schema explained above). Fix the naming of the meson8b_fclk_div3_div clock to follow the naming schema. This also fixes serial console on my Meson8m2 board because "clk81" uses fclk_div3 as parent. However, since the hierarchy stops at meson8b_fclk_div3 there's no known parent clock and the rate of "clk81" and all of it's children (UART clock, SDIO MMC controller clock, ...) are all 0. Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-25clk: meson: drop meson_aoclk_gate_regmap_opsYixun Lan1-2/+0
let's remove the unused meson_aoclk_gate_regmap_ops Fixes: 1f932d99710d ("clk: meson: remove superseded aoclk_gate_regmap") Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-16clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmapJerome Brunet1-1/+10
Using __clk_mux_determine_rate effectively ignores CLK_MUX_ROUND_CLOSEST if set the related clk_regmap mux instance. Use clk_mux_determine_rate_flags() to make sure the flag is honored. Fixes: ea11dda9e091 ("clk: meson: add regmap clocks") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-14clk: meson: Drop unused local variable and add staticStephen Boyd3-11/+10
Fixes the following warnings: drivers/clk/meson/meson8b.c:512:19: warning: symbol 'meson8b_mpeg_clk_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:526:19: warning: symbol 'meson8b_clk81' was not declared. Should it be static? drivers/clk/meson/meson8b.c:540:19: warning: symbol 'meson8b_cpu_in_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:591:19: warning: symbol 'meson8b_cpu_scale_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:608:19: warning: symbol 'meson8b_cpu_scale_out_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:626:19: warning: symbol 'meson8b_cpu_clk' was not declared. Should it be static? drivers/clk/meson/gxbb.c:392:27: warning: symbol 'gxbb_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/gxbb.c:439:27: warning: symbol 'gxl_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:195:27: warning: symbol 'axg_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:248:27: warning: symbol 'axg_hifi_init_regs' was not declared. Should it be static? drivers/clk/meson/meson8b.c: In function 'meson8b_clkc_probe': drivers/clk/meson/meson8b.c:1052:14: warning: unused variable 'clk' [-Wunused-variable] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-13clk: meson: clean-up clk81 clocksJerome Brunet2-8/+4
clk81 is a composite clock which parents all the peripheral clocks of the platform. It is a critical clock which is used as provided by the bootloader. We don't want to change its rate or reparent it, ever. Remove the CLK_IGNORE_UNUSED on the mux and divider. These clock can't gate so the flag is useless, and the gate is already critical, so the clock won't ever be unused. Remove CLK_SET_RATE_NO_REPARENT from mux, it is useless since the mux is read-only. Remove CLK_SET_RATE_PARENT from the gate and divider and use ro_ops for the divider. A peripheral clock should not try to change the rate of clk81. Stopping the rate propagation is good way to make sure such request would be ignored. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add fdiv clock gatesJerome Brunet6-33/+278
Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add mpll pre-dividerJerome Brunet6-13/+65
mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: axg: add hifi pll clockJerome Brunet2-1/+56
Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add ROUND_CLOSEST to the pll driverJerome Brunet2-4/+15
Provide an option for the pll driver to round to the rate closest to the requested rate, instead of systematically rounding down. This may allow the provided rate to be closer to the requested rate when rounding up is not an issue Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add gp0 frac parameter for axg and gxlJerome Brunet2-2/+12
Add the frac parameter for the gp0 pll of the axg and gxl. This allows to achieve rates between the fixed settings provided by the table. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: improve pll driver results with fracJerome Brunet2-59/+91
Finding the appropriate settings of meson plls is too tricky to be done entirely at runtime, using calculation only. Many combination of m, n and od won't lock which is why we are using a table for this. However, for plls having a fractional parameters, it is possible to improve on the result provided by the table by calculating the frac parameter. This change adds the calculation of frac when the parameter is available and the rate provided by the table is not an exact match for the requested rate. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: remove special gp0 lock loopJerome Brunet4-15/+1
After testing, it appears that the gxl (and axg) does not require the special locking/reset loop which was initially added for it. All the values present in the gxl table can locked with the simple lock checking loop. The change switches the gxl and axg gp0 back to the simple lock checking loop and removes the code no longer required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: poke pll CNTL lastJerome Brunet2-3/+3
Poking CNTL first may take the PLL out of reset while we are still applying the initial settings, including the filter values initialization. This is the case for the axg and gxl gp0 pll. Doing this poke last ensures the pll stays in reset while the initial settings are applied. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add fractional part of meson8b fixed_pllJerome Brunet1-0/+5
Add the missing frac parameter to the meson8b fixed_pll. It seems to be always on this platform, so the rate remains unchanged Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: use hhi syscon if availableJerome Brunet3-24/+60
On gxbb and axg, try to get the hhi regmap from the parent DT node, which should be the HHI system controller once the necessary changes have been made in amlogic's DTs Until then, if getting regmap through the system controller fails, the clock controller will fall back to the old way, requesting memory region directly and then registering the regmap itself. This should allow a smooth transition to syscon Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: remove obsolete cpu_clkJerome Brunet3-190/+1
meson8b cpu_clk has been replaced by a set of divider and mux clocks. meson_cpu_clk is no longer used and can be removed Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: rework meson8b cpu clockJerome Brunet2-61/+119
Instead of migrating meson cpu_clk to clk_regmap, like the other meson clock drivers, we take advantage of the massive rework to get rid of it completely, and solve (the first part) of the related FIXME notice. As pointed out in the code comments, the cpu_clk should be modeled with dividers and muxes it is made of, instead of one big composite clock. The cpu_clk was not working correctly to enable dvfs on meson8b. It hangs quite often when changing the cpu clock rate. This new implementation, based on simple elements improves the situation but the platform will still hang from time to time. This is not acceptable so, until we can make the mechanism around the cpu clock stable, the cpu clock subtree has been put in read-only mode, preventing any change of the cpu clock The notifier and read-write operation will be added back when we have a solution to the problem. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: split divider and gate part of mpllJerome Brunet8-118/+197
The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: migrate plls clocks to clk_regmapJerome Brunet5-530/+535
Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: migrate the audio divider clock to clk_regmapJerome Brunet3-68/+30
Rework meson audio divider driver to use clk_regmap and move gxbb clock using meson_clk_audio_divider to clk_regmap. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: migrate mplls clocks to clk_regmapJerome Brunet5-354/+313
Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: add regmap helpers for parmJerome Brunet1-0/+16
Meson clock drivers are using struct parm to describe each field of the clock provider. Providing helpers to access these fields with regmap helps to keep drivers readable Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: migrate muxes to clk_regmapJerome Brunet3-213/+184
Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-03-13clk: meson: migrate dividers to clk_regmapJerome Brunet3-159/+142
Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 23:17:04 +0000