summaryrefslogtreecommitdiffstats
path: root/drivers/clk/mediatek/clk-pll.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-11clk: mediatek: Allow changing PLL rate when it is offJames Liao1-11/+2
Some modules may need to change its clock rate before turn on it. So changing PLL's rate when it is off should be allowed. This patch removes PLL enabled check before set rate, so that PLLs can set new frequency even if they are off. On MT8173 for example, ARMPLL's enable bit can be controlled by other HW. That means ARMPLL may be turned on even if we (CPU / SW) set ARMPLL's enable bit as 0. In this case, SW may want and can still change ARMPLL's rate by changing its pcw and postdiv settings. But without this patch, new pcw setting will not be applied because its enable bit is 0. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Michael Turquette <mturuqette@baylibre.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_dataWeiyi Lu1-6/+11
In previous MediaTek PLL design, it assumes the pcw change control is always on the CON1 register. However, the pcw change bit on MT8183 was moved onto CON0 because the the PCW length of audio PLLs are extended to 32-bit. Add configurable pcw_chg_reg to set the pcw change control register address or using the default control register CON1 if without setting in pll data. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_dataOwen Chen1-4/+11
1. pcwibits: The integer bits of pcw for PLLs is extend to 8 bits, add a variable to indicate this change and backward-compatible. 2. fmin: The PLL frequency lower-bound is vary from 1GHz to 1.5GHz, add a variable to indicate platform-dependent. Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Disable tuner_en before change PLL rateOwen Chen1-14/+34
PLLs with tuner_en bit, such as APLL1, need to disable tuner_en before apply new frequency settings, or the new frequency settings (pcw) will not be applied. The tuner_en bit will be disabled during changing PLL rate and be restored after new settings applied. Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support) Cc: <stable@vger.kernel.org> Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-02clk: mediatek: add the option for determining PLL source clockChen Zhong1-1/+4
Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: Add MT2712 clock supportweiyi.lu@mediatek.com1-2/+11
Add MT2712 clock support, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> [sboyd@codeaurora.org: Static on top_clk_data] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08clk: mediatek: Add MT2701 clock supportShunli Wang1-0/+1
Add MT2701 clock support, include topckgen, apmixedsys, infracfg, pericfg and subsystem clocks. Signed-off-by: Shunli Wang <shunli.wang@mediatek.com> Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Tested-by: John Crispin <blogic@openwrt.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-18clk: mediatek: remove __init from clk registration functionsJames Liao1-1/+1
Remove __init from functions that will be used by init functions that support probe deferral. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: mediatek: Add USB clock support in MT8173 APMIXEDSYSJames Liao1-6/+1
Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock is needed by USB 3.0. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-07-28clk: mediatek: Add MT8173 MMPLL change rate supportJames Liao1-3/+15
MT8173 MMPLL frequency settings are different from common PLLs. It needs different post divider settings for some ranges of frequency. This patch add support for MT8173 MMPLL frequency setting by adding div-rate table to lookup suitable post divider setting under a specified frequency. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: mediatek: Fix calculation of PLL rate settingsJames Liao1-2/+2
Avoid u32 overflow when calculate post divider setting, and increase the max post divider setting from 3 (/8) to 4 (/16). Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: mediatek: Fix PLL registers setting flowJames Liao1-9/+12
Write postdiv and pcw settings at the same time for PLLs if postdiv and pcw settings are on the same register. This is need by PLLs such as MT8173 MMPLL and ARM*PLL. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-19clk: mediatek: Initialize clk_init_dataRicky Liang1-1/+1
The variable init (struct clk_init_data) is allocated on the stack. We weren't initializing the .flags field, so it contains random junk, which can cause all kinds of interesting issues when the flags are parsed by clk_register. Signed-off-by: Ricky Liang <jcliang@chromium.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-05clk: mediatek: Add initial common clock support for Mediatek SoCs.James Liao1-0/+332
This patch adds common clock support for Mediatek SoCs, including plls, muxes and clock gates. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [sboyd@codeaurora.org: Squelch checkpatch warning in clk-mtk.h] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 06:41:57 +0000