summaryrefslogtreecommitdiffstats
path: root/drivers/clk/clk-gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-10Replace HTTP links with HTTPS ones: Common CLK frameworkAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-05clk: gpio: Use DT way of specifying parentsStephen Boyd1-113/+59
Nobody has used the gpio clk registration functions nor the gpio clk_ops exposed by the basic gpio clk type. Let's remove all those APIs and move the gpio clk support into the C file. Since nothing is using the exported APIs, simplify the driver to be a platform driver that uses clk_parent_data to pick 0th or 1st cell of the node's clocks property. Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190830150923.259497-2-sboyd@kernel.org
2019-11-08clk: clk-gpio: propagate rate change to parentMichael Hennerich1-1/+1
For an external clock source, which is gated via a GPIO, the rate change should typically be propagated to the parent clock. The situation where we are requiring this propagation, is when an external clock is connected to override an internal clock (which typically has a fixed rate). The external clock can have a different rate than the internal one, and may also be variable, thus requiring the rate propagation. This rate change wasn't propagated until now, and it's unclear about cases where this shouldn't be propagated. Thus, it's unclear whether this is fixing a bug, or extending the current driver behavior. Also, it's unsure about whether this may break any existing setups; in the case that it does, a device-tree property may be added to disable this flag. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-26clk: Remove CLK_IS_BASIC clk flagStephen Boyd1-1/+1
This flag was historically used to indicate that a clk is a "basic" type of clk like a mux, divider, gate, etc. This never turned out to be very useful though because it was hard to cleanly split "basic" clks from other clks in a system. This one flag was a way for type introspection and it just didn't scale. If anything, it was used by the TI clk driver to indicate that a clk_hw wasn't contained in the SoC specific clk structure. We can get rid of this define now that TI is finding those clks a different way. Cc: Tero Kristo <t-kristo@ti.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: <linux-pwm@vger.kernel.org> Cc: <linux-amlogic@lists.infradead.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clkThomas Petazzoni1-2/+37
The current implementation of gpio-gate-clk enables/disables the clock using the GPIO in the ->enable() and ->disable() clock callbacks. This requires the GPIO to be configurable in atomic contexts. While it is the case for most memory-mapped GPIO controllers, it is not the case for GPIO expanders on I2C or SPI. This commit extends the gpio-gate-clk to check whether the GPIO calls require sleeping or not. If sleeping is not required, the current implementation based on ->enable()/->disable() is kept. However, if sleeping is needed, we instead implement the logic in the ->prepare() and ->unprepare() hooks. Thanks to this, a gate clock connected to a GPIO on a GPIO expander can be controlled with the existing driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [sboyd@kernel.org: Mark clk ops static] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-11clk: Tag basic clk types with SPDXStephen Boyd1-4/+1
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30clk: Convert to using %pOFn instead of device_node.nameRob Herring1-4/+4
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: clk-gpio: Allow GPIO to sleep in set/get_parentMike Looijmans1-2/+2
When changing or retrieving clock parents, the caller is in a sleepable state (like prepare) so the GPIO operation need not be atomic. Replace gpiod_{g|s}et_value with gpiod_{g|s}et_value_cansleep in the {g|s}et_parent calls for the GPIO based clock mux. This fixes a "slowpath" warning when the GPIO controller is an I2C expander or something similar. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-02clk: clk-gpio: Request GPIO descriptor as LOWLinus Walleij1-9/+1
Requesting the GPIOD_OUT_LOW low will make sure the GPIO is deasserted when requested. The gpiolib core will make sure that if the GPIO line is active low, it will be logically driven high when deasserted, see drivers/gpiolib.c gpiod_configure_flags(). Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: clk-gpio: Make GPIO clock provider use descriptors onlyLinus Walleij1-55/+35
After som grep:ing it turns out nothing in the kernel is really calling clk_[hw_]_register_gpio_[gate|mux](). All existing instances are just created directly from the device tree probe functions at the bottom of the clk-gpio.c clock provider file. This means we can change the signature of the function without any consequences! Everyone should be using GPIO descriptors now, so let's just go in and enforce that. This saves a bit of code since GPIO descriptors know inherently if they are active low so no need for the code keeping track of that. We leave it to the caller to come up with the GPIO descriptor. It is nowadays possible to do that even without a corresponding device, so no excuse not to pass them around. The one in-kernel user lifecycles it using devm_gpiod_get() in gpio_clk_driver_probe(). Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-19clk: gpio: Add hw based registration APIsStephen Boyd1-11/+41
Add registration APIs in the clk gpio code to return struct clk_hw pointers instead of struct clk pointers. This way we hide the struct clk pointer from providers unless they need to use consumer facing APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26clk: gpio: Remove impossible check for of_clk_get_parent_count() < 0Stephen Boyd1-4/+2
The check for < 0 is impossible now that of_clk_get_parent_count() returns an unsigned int. Simplify the code and update the type here. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-18Merge branch 'clk-fixes' into clk-nextStephen Boyd1-1/+1
* clk-fixes: clk: gpio: Really allow an optional clock= DT property Revert "clk: qcom: Specify LE device endianness"
2016-02-18clk: gpio: Really allow an optional clock= DT propertyStephen Boyd1-1/+1
We mis-merged the original patch from Russell here and so the patch went almost all the way, except that we still failed to probe when there wasn't a clocks property in the DT node. Allow that case by making a negative value from of_clk_get_parent_count() into "no parents", like the original patch did. Fixes: 7ed88aa2efa5 ("clk: fix clk-gpio.c with optional clock= DT property") Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-06clk: gpio: Make into a platform driverStephen Boyd1-113/+52
clk_get() for DT based clks already returns EPROBE_DEFER when the OF clk provider is not present. So having all this code in the clk provider to return EPROBE_DEFER when the gpio isn't ready yet can be replaced with a platform driver that doesn't add the clk provider until the gpio can be requested. Get rid of the OF_CLK_DECLARE and convert this to a platform driver instead. Tested-by: Jyri Sarha <jsarha@ti.com> Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Jon Nettleton <jon@solid-run.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29clk: move the common clock's to_clk_*(_hw) macros to clk-provider.hGeliang Tang1-2/+0
to_clk_*(_hw) macros have been repeatedly defined in many places. This patch moves all the to_clk_*(_hw) definitions in the common clock framework to public header clk-provider.h, and drop the local definitions. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-02clk: fix clk-gpio.c with optional clock= DT propertyRussell King1-9/+13
When the clock DT property is not given, of_clk_get_parent_count() returns -ENOENT, which then tries to allocate -2 x 4 bytes of memory, which of course fails, causing the whole driver to fail to create the clock. This causes the SolidRun platforms to fail probing the SDHCI1 interface which is connected to the WiFi. Fix this by detecting errno codes, skipping the allocation, and fixing of_clk_gpio_gate_delayed_register_get() to handle a NULL parent_names array. Fixes: 80eeb1f0f757 ("clk: add gpio controlled clock multiplexer") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-31clk: gpio: handle error codes for of_clk_get_parent_count()Brian Norris1-2/+4
We might make bad memory allocations if we get (e.g.) -ENOSYS from of_clk_get_parent_count(). Noticed by Coverity. Fixes: f66541ba02d5 ("clk: gpio: Get parent clk names in of_gpio_clk_setup()") Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-31clk: gpio: fix memory leakSudip Mukherjee1-1/+3
If we fail to allocate parent_name then we are returning but we missed freeing data which has already been allocated. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-11-18clk: gpio: Get parent clk names in of_gpio_clk_setup()Jyri Sarha1-16/+17
Get parent clk names in of_gpio_clk_setup() and store the names in struct clk_gpio_delayed_register_data instead of doing it from the clk provider's get() callback. of_clk_get_parent_name() can't be called in struct of_clk_provider's get() callback since it may make a call to of_clk_get_from_provider() and this in turn tries to recursively lock of_clk_mutex. Signed-off-by: Jyri Sarha <jsarha@ti.com> Cc: Sergej Sawazki <ce3a@gmx.de> Fixes: 0a4807c2f9a4 ("clk: Make of_clk_get_parent_name() robust with #clock-cells = 1") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: gpio: Mark parent_names array constStephen Boyd1-6/+7
Let's encourage const arrays of parent names like other basic clock types. Cc: Sergej Sawazki <ce3a@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: gpio: Unlock mutex on error pathStephen Boyd1-2/+4
We don't unlock the mutex if we fail to allocate the parent names array. Unlock it and return an error in this case as well. Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Cc: Sergej Sawazki <ce3a@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: Rename clk-gpio-gate.c to clk-gpio.cSergej Sawazki1-0/+322
The file clk-gpio-gate.c does not only contain the gate clock, but also the mux clock. Rename the file to clk-gpio.c. Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Sergej Sawazki <ce3a@gmx.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>