summaryrefslogtreecommitdiffstats
path: root/drivers/clk/clk-aspeed.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-18clk: Aspeed: Setup video engine clockingEddie James1-3/+39
Add eclk mux and clock divider table. Also change the video engine reset to the correct clock; it was previously on the video capture but needs to be on the video engine clock. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-15Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The new and exciting feature this time around is in the clk core. We've added duty cycle support to the clk API so that clk signal duty cycle ratios can be adjusted while taking into account things like clk dividers and clk tree hierarchy. So far only one SoC has implemented support for this, but I expect there will be more to come in the future. Outside of the core, we have the usual pile of clk driver updates and additions. The Amlogic meson driver got the most lines in the diffstat this time around because it added support for a whole bunch of hardware and duty cycle configuration. After that the Rockchip PX30, Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff. We're left with the collection of non-critical fixes after that. Overall it looks pretty quiet this time. Core: - Clk duty cycle support - Proper CLK_SET_RATE_GATE support throughout the tree New Drivers: - Actions Semi Owl series S700 SoC clk driver - Qualcomm SDM845 display clock controller - i.MX6SX ocram_s clk support - Uniphier NAND, USB3 PHY, and SPI clk support - Qualcomm RPMh clk driver - i.MX7D mailbox clk support - Maxim 9485 Programmable Clock Generator - expose 32 kHz PLL on PXA SoCs - imx6sll GPIO clk gate support - Atmel at91 I2S audio clk support - SI544/SI514 clk on/off support - i.MX6UL GPIO clock gates in CCM CCGR - Renesas Crypto Engine clocks on R-Car H3 - Renesas clk support for the new RZ/N1D SoC - Allwinner A64 display engine clock support - support for Rockchip's PX30 SoC - Amlogic Meson axg PCIe and audio clocks - Amlogic Meson GEN CLK on gxbb, gxl and axg Updates: - remove an unused variable from Exynos4412 ISP driver - fix a thinko bug in SCMI clk division logic - add missing of_node_put()s in some i.MX clk drivers - Tegra SDMMC clk jitter improvements with high speed signaling modes - SPDX tagging for qcom and cs2000-cp drivers - stop leaking con ids in __clk_put() - fix a corner case in fixed factor clk probing where node is in DT but parent clk is registered much later - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value - i.MX clk init arrays removed in place of CLK_IS_CRITICAL - convert to CLK_IS_CRITICAL for i.MX51/53 driver - fix Tegra BPMP driver oops when xlating a NULL clk - proper default configuration for vic03 and vde clks on Tegra124 - mark Tegra memory controller clks as critical - fix array bounds clamp in Tegra's emc determine_rate() op - Ingenic i2s bit update and allow UDC clk to gate - fix name of aspeed SDC clk define to have only one 'CLK' - fix i.MX6QDL video clk parent - critical clk markings for qcom SDM845 - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits) clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: cs2000-cp: convert to SPDX identifiers clk: scmi: Fix the rounding of clock rate clk: qcom: Add display clock controller driver for SDM845 clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() clk: imx: add ocram_s clock for i.mx6sx clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent ...
2018-07-11clk: aspeed: Support HPLL strapping on ast2400Joel Stanley1-13/+29
The HPLL can be configured through a register (SCU24), however some platforms chose to configure it through the strapping settings and do not use the register. This was not noticed as the logic for bit 18 in SCU24 was confused: set means programmed, but the driver read it as set means strapped. This gives us the correct HPLL value on Palmetto systems, from which most of the peripheral clocks are generated. Fixes: 5eda5d79e4be ("clk: Add clock driver for ASPEED BMC SoCs") Cc: stable@vger.kernel.org # v4.15 Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: aspeed: Fix SDCLK nameLei YU1-1/+1
The SDCLK was named SDCLKCLK, and no one has used this yet. Fix it. Signed-off-by: Lei YU <mine260309@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as criticalJoel Stanley1-2/+2
This is used by the host to talk to the BMC's PCIe slave device. The BMC is not involved, but the clock needs to be enabled so the host can use the device. Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Cc: stable@vger.kernel.org # 4.15 Acked-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: aspeed: Treat a gate in reset as disabledBenjamin Herrenschmidt1-0/+13
On some systems, we come out of the bootloader with some gates set with the clock "enabled" but the reset also asserted. Since 8a53fc511c5e "clk: aspeed: Prevent reset if clock is enabled" we check that enabled bit in aspeed_clk_enabled(), and do nothing if already set. This breaks when the above scenario occurs, as the clock is enabled, but the reset still needs to be lifted. This patch fixes it by also checking the reset bit (if any) and treating a gate in "reset" as being disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: 8a53fc511c5e "clk: aspeed: Prevent reset if clock is enabled" Cc: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds1-11/+46
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook1-3/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04Merge branches 'clk-imx6sx', 'clk-imx7d-enet' and 'clk-aspeed-24' into clk-nextStephen Boyd1-1/+8
* clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock
2018-06-01clk: aspeed: Add 24MHz fixed clockLei YU1-1/+8
Add a 24MHz fixed clock. This clock will be used for certain devices, e.g. pwm. Signed-off-by: Lei YU <mine260309@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk:aspeed: Fix reset bits for PCI/VGA and PECIJae Hyun Yoo1-2/+2
This commit fixes incorrect setting of reset bits for PCI/VGA and PECI modules. 1. Reset bit for PCI/VGA is 8. 2. PECI reset bit is missing so added bit 10 as its reset bit. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Cc: stable <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: aspeed: Support second reset registerJoel Stanley1-8/+36
The ast2500 has an additional reset register that contains resets not present in the ast2400. This enables support for this register, and adds the one reset line that is controlled by it. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15clk: aspeed: Prevent reset if clock is enabledEddie James1-12/+17
According to the Aspeed specification, the reset and enable sequence should be done when the clock is stopped. The specification doesn't define behavior if the reset is done while the clock is enabled. From testing on the AST2500, the LPC Controller has problems if the clock is reset while enabled. Therefore, check whether the clock is enabled or not before performing the reset and enable sequence in the Aspeed clock driver. Reported-by: Lei Yu <mine260309@gmail.com> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15clk: aspeed: Fix is_enabled for certain clocksEddie James1-1/+2
Some of the Aspeed clocks are disabled by setting the relevant bit in the "clock stop control" register to one, while others are disabled by setting their bit to zero. The driver already uses a flag per gate to identify this behavior, but doesn't apply it in the clock is_enabled function. Use the existing gate flag to correctly return whether or not a clock is enabled in the aspeed_clk_is_enabled function. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Fixes: 6671507f0fbd ("clk: aspeed: Handle inverse polarity of USB port 1 clock gate") Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-01-26clk: aspeed: Handle inverse polarity of USB port 1 clock gateBenjamin Herrenschmidt1-3/+12
The USB port 1 clock gate control has an inversed polarity from all the other clock gates in the chip. This makes the aspeed_clk_{enable,disable} functions honor the flag CLK_GATE_SET_TO_DISABLE and set that flag appropriately so it's set for all clocks except USB port 1. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: aspeed: Fix return value check in aspeed_cc_init()Wei Yongjun1-1/+1
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: a2e230c7b2ea ("clk: Add clock driver for ASPEED BMC SoCs") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: aspeed: Add reset controllerJoel Stanley1-1/+81
There are some resets that are not associated with gates. These are represented by a reset controller. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: aspeed: Register gated clocksJoel Stanley1-0/+130
The majority of the clocks in the system are gates paired with a reset controller that holds the IP in reset. This borrows from clk_hw_register_gate, but registers two 'gates', one to control the clock enable register and the other to control the reset IP. This allows us to enforce the ordering: 1. Place IP in reset 2. Enable clock 3. Delay 4. Release reset There are some gates that do not have an associated reset; these are handled by using -1 as the index for the reset. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: aspeed: Add platform driver and register PLLsJoel Stanley1-0/+130
This registers a platform driver to set up all of the non-core clocks. The clocks that have configurable rates are now registered. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: aspeed: Register core clocksJoel Stanley1-0/+177
This registers the core clocks; those which are required to calculate the rate of the timer peripheral so the system can load a clocksource driver. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26clk: Add clock driver for ASPEED BMC SoCsJoel Stanley1-0/+141
This adds the stub of a driver for the ASPEED SoCs. The clocks are defined and the static registration is set up. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>