summaryrefslogtreecommitdiffstats
path: root/drivers/clk/at91
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds1-67/+214
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-27clk: at91: sckc: use dedicated functions to unregister clockClaudiu Beznea1-2/+2
Use at91 specific functions to free all resources in case of error. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sama5d4 sck registrationClaudiu Beznea1-15/+28
Improve error path for sama5d4 sck registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: remove unnecessary lineClaudiu Beznea1-1/+0
Remove unnecessary line. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sam9x5 sck registerClaudiu Beznea1-18/+32
Improve error path for sam9x5 slow clock registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow clock osclillatorClaudiu Beznea1-0/+8
Add support to free slow clock oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow rc oscillatorClaudiu Beznea1-0/+8
Add support to free slow rc oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow oscillatorClaudiu Beznea1-0/+8
Add support to free slow oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: add support for SAM9X60Claudiu Beznea1-0/+74
Add support for SAM9X60's slow clock. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: add support to specify registers bit offsetsClaudiu Beznea1-32/+61
Different IPs uses different bit offsets in registers for the same functionality, thus adapt the driver to support this. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: sama5d4 has no bypass supportClaudiu Beznea1-6/+0
The slow clock of SAMA5D4 has no bypass support thus remove it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner17-101/+17
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd15-154/+840
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-04-25clk: at91: Mark struct clk_range as constStephen Boyd7-14/+14
It's just some static data that doesn't get changed after being used. Mark it const everywhere. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 pmc driverAlexandre Belloni2-0/+308
Add a driver for the PMC clocks of the sam9c60. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Staticize spinlock] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 PLL driverAlexandre Belloni3-0/+337
The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: master: Add sam9x60 supportAlexandre Belloni2-3/+6
The sam9x60 cpu clock is located at a different offset but is otherwise similar to the master clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: usb: Add sam9x60 supportAlexandre Belloni2-6/+30
The sam9x60 USB clock supports four different parents, ensure they can be selected. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring generated PCR layoutAlexandre Belloni4-24/+29
The PCR register layout for GCLKCSS is changing for the future SoCs, allow configuring it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring peripheral PCR layoutAlexandre Belloni6-22/+71
The PCR register actually changed layout for each SoC. By chance, this didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven bits wide and sama5d4 and sama5d2 don't have DIV. For the DT backward compatibility, keep the layout as is. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: sckc: handle different RC startup timeAlexandre Belloni1-2/+15
The sama5d3 slow RC oscillator as a different startup time than all the previous SoCs. Handle that using its own compatible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: modernize sckc bindingAlexandre Belloni1-89/+36
Remove the need for child nodes in the sckc binding and register the whole sckc tree (3 clocks in total) from the sckc node. DT backward compatibility is kept by looking for properties in child nodes when they are not present in the sckc node. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-18clk: at91: fix programmable clock for sama5d2Matthias Wieloch3-15/+54
The prescaler formula of the programmable clock has changed for sama5d2. Update the driver accordingly. Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [nicolas.ferre@microchip.com: adapt the prescaler range, fix clk_programmable_recalc_rate, split patch] Signed-off-by: Matthias Wieloch <matthias.wieloch@few-bauer.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08Merge branch 'clk-at91' into clk-nextStephen Boyd3-5/+10
* clk-at91: clk: at91: programmable: remove unneeded register read clk: at91: optimize clk_round_rate() for AUDIO_PLL clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
2019-02-25clk: at91: programmable: remove unneeded register readNicolas Ferre1-3/+0
This register read is a leftover of a previous read/modify/write. We now use regmap_update_bits(), so we don't need it anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: at91: optimize clk_round_rate() for AUDIO_PLLMichał Mirosław1-1/+8
Stop the search for parent rate when exact match is found. This makes for 3 clk_round_rate() calls instead of 64 of them on SAMA5D2-based board when searching for 12.288MHz clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20clk: at91: fix masterck nameAlexandre Belloni3-4/+4
The master clock is actually named masterck earlier in the driver. Having "mck" in the parent list means that it can never be selected. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver") Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20clk: at91: fix at91sam9x5 peripheral clock numberAlexandre Belloni1-2/+1
nck() looks at the last id in an array and unfortunately, at91sam9x35_periphck has a sentinel, hence the id is 0 and the calculated number of peripheral clocks is 1 instead of a maximum of 31. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2Michał Mirosław1-1/+2
Datasheet for SAMA5D2x mentions 6 sources for PCKx, the last being AUDIOPLL. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branches 'clk-actions-reset', 'clk-imx7-init-critical', 'clk-mmp2-ids' ↵Stephen Boyd24-990/+2870
and 'clk-at91-pmc-rework' into clk-next - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs - Rework at91 PMC clock driver for new DT bindings * clk-actions-reset: clk: actions: Add Actions Semi S900 SoC Reset Management Unit support clk: actions: Add Actions Semi S700 SoC Reset Management Unit support clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support dt-bindings: reset: Add binding constants for Actions Semi S900 RMU dt-bindings: reset: Add binding constants for Actions Semi S700 RMU dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs clk: actions: Cache regmap info in private clock descriptor * clk-imx7-init-critical: clk: imx7d: remove CLK_IS_CRITICAL flag for arm_a7_root_clk clk: imx: cpu clock should be always critical clk: imx: imx7d: remove clks_init_on array clk: imx: imx7d: remove unnecessary clocks from clks_init_on array * clk-mmp2-ids: clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk * clk-at91-pmc-rework: clk: at91: move DT compatibility code to its own file clk: at91: add at91sam9rl PMC driver clk: at91: add at91sam9x5 PMCs driver clk: at91: add at91sam9260 PMC driver clk: at91: add sama5d2 PMC driver clk: at91: add sama5d4 pmc driver clk: at91: add new DT lookup function dt-bindings: clk: at91: Document new PMC binding clk: at91: add pmc_data struct and helpers clk: at91: allow clock registration from C code clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() clk: at91: audio-pll: separate registration from DT parsing clk: at91: h32mx: separate registration from DT parsing clk: at91: generated: SSCs don't have a gclk clk: at91: audio-pll: fix audio pmc type
2018-10-17clk: at91: move DT compatibility code to its own fileAlexandre Belloni17-944/+962
Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9rl PMC driverAlexandre Belloni2-1/+172
Add a driver for the PMC clocks of the at91sam9rl SoC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9x5 PMCs driverAlexandre Belloni2-1/+310
Add a driver for the PMC clocks of the at91sam9x5 SoCs Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9260 PMC driverAlexandre Belloni2-0/+495
Add a driver for the PMC clocks of the at91sam9260, at91sam9261, at91am9263 and at91sam9g20 SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d2 PMC driverAlexandre Belloni2-0/+337
Add a driver for the PMC clocks of the sama5d2 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d4 pmc driverAlexandre Belloni2-0/+265
Add a driver for the PMC clocks of the sama5d4 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add new DT lookup functionAlexandre Belloni1-0/+34
Add a new DT lookup function to lookup for PMC clocks. Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the platforms are converted. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add pmc_data struct and helpersAlexandre Belloni2-0/+61
Add a new strut to handle references to all the PMC clocks and implement allocation/free helpers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: allow clock registration from C codeAlexandre Belloni14-59/+172
Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Include pmc.h] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated()Alexandre Belloni1-17/+10
Set gck->audio_pll_allowed in at91_clk_register_generated. This makes it easier to do it from code that is not parsing device tree. Also, this fixes an issue where the resulting clk_hw can be dereferenced before being tested for error. Fixes: 1a1a36d72e3d ("clk: at91: clk-generated: make gclk determine audio_pll rate") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: audio-pll: separate registration from DT parsingAlexandre Belloni1-38/+111
Separate registration out of of_sama5d2_clk_audio_pll*_setup to allow other code to use it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Include pmc.h] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: h32mx: separate registration from DT parsingAlexandre Belloni1-13/+27
Separate registration out of of_sama5d4_clk_h32mx_setup to allow other code to use it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: generated: SSCs don't have a gclkAlexandre Belloni1-4/+1
As the SSCs don't have gclk, don't check for their ID to allow them to set the audio pll rate. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: audio-pll: fix audio pmc typeAlexandre Belloni1-1/+1
The allocation for the audio pmc is using the size of struct clk_audio_pad instead of struct clk_audio_pmc. This works fine because the former is larger than the latter but it is safer to be correct. Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: at91: Fix division by zero in PLL recalc_rate()Ronald Wahl1-0/+3
Commit a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached MUL and DIV values") removed a check that prevents a division by zero. This now causes a stacktrace when booting the kernel on a at91 platform if the PLL DIV register contains zero. This commit reintroduces this check. Fixes: a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached...") Cc: <stable@vger.kernel.org> Signed-off-by: Ronald Wahl <rwahl@gmx.de> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06clk: at91: add I2S clock mux driverCodrin Ciubotariu2-0/+117
This driver is a simple muxing driver that controls the I2S's clock input by using syscon/regmap to change the parent. The available inputs can be peripheral clock and generated clock. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [sboyd@kernel.org: Fix SPDX tag comment style] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: at91: PLL recalc_rate() now using cached MUL and DIV valuesMarcin Ziemianowicz1-12/+1
When a USB device is connected to the USB host port on the SAM9N12 then you get "-62" error which seems to indicate USB replies from the device are timing out. Based on a logic sniffer, I saw the USB bus was running at half speed. The PLL code uses cached MUL and DIV values which get set in set_rate() and applied in prepare(), but the recalc_rate() function instead queries the hardware instead of using these cached values. Therefore, if recalc_rate() is called between a set_rate() and prepare(), the wrong frequency is calculated and later the USB clock divider for the SAM9N12 SOC will be configured for an incorrect clock. In my case, the PLL hardware was set to 96 Mhz before the OHCI driver loads, and therefore the usb clock divider was being set to /2 even though the OHCI driver set the PLL to 48 Mhz. As an alternative explanation, I noticed this was fixed in the past by 87e2ed338f1b ("clk: at91: fix recalc_rate implementation of PLL driver") but the bug was later re-introduced by 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally"). Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally) Cc: <stable@vger.kernel.org> Signed-off-by: Marcin Ziemianowicz <marcin@ziemianowicz.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-12-21clk: at91: pmc: Support backup for programmable clocksRomain Izard3-0/+39
When an AT91 programmable clock is declared in the device tree, register it into the Power Management Controller driver. On entering suspend mode, the driver saves and restores the Programmable Clock registers to support the backup mode for these clocks. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: at91: pmc: Save SCSR during suspendRomain Izard1-2/+2
The contents of the System Clock Status Register (SCSR) needs to be restored into the System Clock Enable Register (SCER). As the bootloader will restore some clocks by itself, the issue can be missed as only the USB controller, the LCD controller, the Image Sensor controller and the programmable clocks will be impacted. Fix the obvious typo in the suspend/resume code, as the IMR register does not need to be saved twice. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: at91: pmc: Wait for clocks when resumingRomain Izard1-8/+16
Wait for the syncronization of all clocks when resuming, not only the UPLL clock. Do not use regmap_read_poll_timeout, as it will call BUG() when interrupts are masked, which is the case in here. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 14:36:52 +0000