summaryrefslogtreecommitdiffstats
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds4-7/+7
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02Merge branch 'next-tpm' of ↵Linus Torvalds14-1062/+1123
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: - Support for partial reads of /dev/tpm0. - Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make everything to use the same data structure for building TPM commands i.e. struct tpm_buf. * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (25 commits) tpm: add support for partial reads tpm: tpm_ibmvtpm: fix kdoc warnings tpm: fix kdoc for tpm2_flush_context_cmd() tpm: tpm_try_transmit() refactor error flow. tpm: use u32 instead of int for PCR index tpm1: reimplement tpm1_continue_selftest() using tpm_buf tpm1: reimplement SAVESTATE using tpm_buf tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read() tpm1: implement tpm1_pcr_read_dev() using tpm_buf structure tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure tpm: tpm-space.c remove unneeded semicolon tpm: tpm-interface.c drop unused macros tpm: add tpm_auto_startup() into tpm-interface.c tpm: factor out tpm_startup function tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c tpm: factor out tpm1_get_random into tpm1-cmd.c tpm: move tpm_getcap to tpm1-cmd.c tpm: move tpm1_pcr_extend to tpm1-cmd.c tpm: factor out tpm_get_timeouts() ...
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-28Merge tag 'char-misc-4.21-rc1' of ↵Linus Torvalds4-189/+197
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc driver patches for 4.21-rc1. Lots of different types of driver things in here, as this tree seems to be the "collection of various driver subsystems not big enough to have their own git tree" lately. Anyway, some highlights of the changes in here: - binderfs: is it a rule that all driver subsystems will eventually grow to have their own filesystem? Binder now has one to handle the use of it in containerized systems. This was discussed at the Plumbers conference a few months ago and knocked into mergable shape very fast by Christian Brauner. Who also has signed up to be another binder maintainer, showing a distinct lack of good judgement :) - binder updates and fixes - mei driver updates - fpga driver updates and additions - thunderbolt driver updates - soundwire driver updates - extcon driver updates - nvmem driver updates - hyper-v driver updates - coresight driver updates - pvpanic driver additions and reworking for more device support - lp driver updates. Yes really, it's _finally_ moved to the proper parallal port driver model, something I never thought I would see happen. Good stuff. - other tiny driver updates and fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits) MAINTAINERS: add another Android binder maintainer intel_th: msu: Fix an off-by-one in attribute store stm class: Add a reference to the SyS-T document stm class: Fix a module refcount leak in policy creation error path char: lp: use new parport device model char: lp: properly count the lp devices char: lp: use first unused lp number while registering char: lp: detach the device when parallel port is removed char: lp: introduce list to save port number bus: qcom: remove duplicated include from qcom-ebi2.c VMCI: Use memdup_user() rather than duplicating its implementation char/rtc: Use of_node_name_eq for node name comparisons misc: mic: fix a DMA pool free failure ptp: fix an IS_ERR() vs NULL check genwqe: Fix size check binder: implement binderfs binder: fix use-after-free due to ksys_close() during fdget() bus: fsl-mc: remove duplicated include files bus: fsl-mc: explicitly define the fsl_mc_command endianness misc: ti-st: make array read_ver_cmd static, shrinks object size ...
2018-12-28Merge tag 'tty-4.21-rc1' of ↵Linus Torvalds2-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the large TTY/Serial driver set of patches for 4.21-rc1. A number of small serial driver changes along with some good tty core fixes for long-reported issues with locking. There is also a new console font added to the tree, for high-res screens, so that should be helpful for many. The last patch in the series is a revert of an older one in the tree, it came late but it resolves a reported issue that linux-next was having for some people. Full details are in the shortlog, and all of these, with the exception of the revert, have been in linux-next for a while with no reported issues" * tag 'tty-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (85 commits) Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250" serial: sccnxp: Allow to use non-standard baud rates serial: sccnxp: Adds a delay between sequential read/write cycles tty: serial: qcom_geni_serial: Fix UART hang tty: serial: qcom_geni_serial: Fix wrap around of TX buffer serial: max310x: Fix tx_empty() callback dt-bindings: serial: sh-sci: Document r8a774c0 bindings dt-bindings: serial: sh-sci: Document r8a774a1 bindings Fonts: New Terminus large console font dt-bindings: serial: lpuart: add imx8qxp compatible string serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly serial: uartps: Fix error path when alloc failed serial: uartps: Check if the device is a console serial: uartps: Add the device_init_wakeup tty: serial: samsung: Increase maximum baudrate tty: serial: samsung: Properly set flags in autoCTS mode tty: Use of_node_name_{eq,prefix} for node name comparisons tty/serial: do not free trasnmit buffer page under port lock serial: 8250: Rate limit serial port rx interrupts during input overruns dt-bindings: serial: 8250: Add rate limit for serial port input overruns ...
2018-12-28mm: convert totalram_pages and totalhigh_pages variables to atomicArun KS1-2/+2
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge branch 'linus' of ↵Linus Torvalds2-31/+27
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-19char: lp: use new parport device modelSudip Mukherjee1-4/+9
Modify lp driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: properly count the lp devicesSudip Mukherjee1-0/+1
When the parallel port is usb based and the lp attaches to it based on LP_PARPORT_AUTO, we do get /dev/lp0 and when we remove the usb device /dev/lp0 is unregistered. If we now reconnect the usb device we get our /dev/lp0 back. But if we now disconnect and reconnect eight times we donot get any lp device and dmesg shows: lp: ignoring parallel port (max. 8) Decrement the lp_count when the device detaches as this represents the number of lp devices connected to the system. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: use first unused lp number while registeringSudip Mukherjee1-1/+5
When the parallel port is usb based and the lp attaches to it based on LP_PARPORT_AUTO, we do get /dev/lp0 and when we remove the usb device /dev/lp0 is unregistered. But if we now reconnect the usb device we get /dev/lp1, another disconnection and reconnection and we get /dev/lp2. Use the port number array to find the first unused lp number and use that to register the lp device with the parallel port. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: detach the device when parallel port is removedSudip Mukherjee1-9/+10
When the parallel port is usb based and the lp attaches to it, we do get /dev/lp0, but when we remove the usb device and the parallel port is gone, we are still left with /dev/lp0. Unregister the device properly in the detach routine based on the port number it has connected to. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char: lp: introduce list to save port numberSudip Mukherjee1-0/+4
When we are registering lp in LP_PARPORT_AUTO mode, we are not keeping any record of the parallel port number to which lp is connecting. Add an array to save the port number to it. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19char/rtc: Use of_node_name_eq for node name comparisonsRob Herring1-2/+2
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. The open coded iterating thru the child node names is converted to use for_each_child_of_node() instead. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17tpm: add support for partial readsTadeusz Struk2-19/+38
Currently to read a response from the TPM device an application needs provide big enough buffer for the whole response and read it in one go. The application doesn't know how big the response it beforehand so it always needs to maintain a 4K buffer and read the max (4K). In case if the user of the TSS library doesn't provide big enough buffer the TCTI spec says that the library should set the required size and return TSS2_TCTI_RC_INSUFFICIENT_BUFFER error code so that the application could allocate a bigger buffer and call receive again. To make it possible in the TSS library, this requires being able to do partial reads from the driver. The library would read the 10 bytes header first to get the actual size of the response from the header, and then read the rest of the response. This patch adds support for partial reads, i.e. the user can read the response in one or multiple reads, until the whole response is consumed. The user can also read only part of the response and ignore the rest by issuing a new write to send a new command. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-12-10rtc: Switch to use %ptRAndy Shevchenko1-4/+3
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Note, we drop the validation option. This is only used in a deprecated ABI and is mostly wrong as many RTCs will still be valid after 2100. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-06char: virtio: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-14/+3
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27drivers/ipmi: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney1-1/+1
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <openipmi-developer@lists.sourceforge.net> Acked-by: Corey Minyard <cminyard@mvista.com>
2018-11-27char: lp: fix spacing style before open parenthesisSudip Mukherjee1-92/+92
Fixes the checkpatch warning: "space prohibited between function name and open parenthesis" Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27char: lp: fix whitespace with pointersSudip Mukherjee1-5/+5
Fixes checkpatch warning: "foo * bar should be foo *bar" Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27char: lp: use tabs instead of spacesSudip Mukherjee1-9/+9
Fixes the checkpatch error: ERROR: code indent should use tabs where possible Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27char: lp: do not use return as a functionSudip Mukherjee1-3/+3
return is not a function, parentheses are not required. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27char: lp: move trailing statement to next lineSudip Mukherjee1-3/+6
Fix checkpatch errors for trailing if else statements. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27char: lp: remove trailing whitespaceSudip Mukherjee1-15/+15
Fix checkpatch error for trailing whitespace. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-20crypto: chacha20-generic - refactor to allow varying number of roundsEric Biggers1-26/+25
In preparation for adding XChaCha12 support, rename/refactor chacha20-generic to support different numbers of rounds. The justification for needing XChaCha12 support is explained in more detail in the patch "crypto: chacha - add XChaCha12 support". The only difference between ChaCha{8,12,20} are the number of rounds itself; all other parts of the algorithm are the same. Therefore, remove the "20" from all definitions, structures, functions, files, etc. that will be shared by all ChaCha versions. Also make ->setkey() store the round count in the chacha_ctx (previously chacha20_ctx). The generic code then passes the round count through to chacha_block(). There will be a ->setkey() function for each explicitly allowed round count; the encrypt/decrypt functions will be the same. I decided not to do it the opposite way (same ->setkey() function for all round counts, with different encrypt/decrypt functions) because that would have required more boilerplate code in architecture-specific implementations of ChaCha and XChaCha. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16hwrng: bcm2835 - Switch to SPDX identifierStefan Wahren1-5/+2
Adopt the SPDX license identifier headers to ease license compliance management. While we are at this fix the comment style, too. Cc: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-13tpm: tpm_ibmvtpm: fix kdoc warningsTomas Winkler1-4/+2
Remove redundant lines in the kdoc: Fixes kdoc warnings: drivers/char/tpm/tpm_ibmvtpm.c:42: warning: Cannot understand * on line 42 - I thought it was a doc line drivers/char/tpm/tpm_ibmvtpm.c:57: warning: Cannot understand * on line 57 - I thought it was a doc line Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: fix kdoc for tpm2_flush_context_cmd()Tomas Winkler1-4/+3
kdoc for tpm2_flush_context_cmd() was off. Fixes: 9aa36b399a50 ("tpm: export tpm2_flush_context_cmd")' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm_try_transmit() refactor error flow.Tomas Winkler1-7/+8
First, rename out_no_locality to out_locality for bailing out on both tpm_cmd_ready() and tpm_request_locality() failure. Second, ignore the return value of go_to_idle() as it may override the return value of the actual tpm operation, the go_to_idle() error will be caught on any consequent command. Last, fix the wrong 'goto out', that jumped back instead of forward. Cc: stable@vger.kernel.org Fixes: 627448e85c76 ("tpm: separate cmd_ready/go_idle from runtime_pm") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: use u32 instead of int for PCR indexTomas Winkler5-15/+14
The TPM specs defines PCR index as a positive number, and there is no reason to use a signed number. It is also a possible security issue as currently no functions check for a negative index, which may become a large number when converted to u32. Adjust the API to use u32 instead of int in all PCR related functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: reimplement tpm1_continue_selftest() using tpm_bufTomas Winkler2-20/+10
Reimplement tpm1_continue_selftest() using tpm_buf structure. This is the last command using the old tpm_cmd_t structure and now the structure can be removed. Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: reimplement SAVESTATE using tpm_bufTomas Winkler1-10/+12
In tpm1_pm_suspend() function reimplement, TPM_ORD_SAVESTATE comamnd using tpm_buf. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read()Tomas Winkler4-5/+5
Rename tpm1_pcr_read_dev to tpm1_pcr_read() to match the counterpart tpm2_pcr_read(). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm1: implement tpm1_pcr_read_dev() using tpm_buf structureTomas Winkler2-33/+23
Implement tpm1_pcr_read_dev() using tpm_buf and remove now unneeded structures from tpm.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structureTomas Winkler3-48/+49
1. Use tpm_buf in tpm1_get_random() 2. Fix comment in tpm_get_random() so it is clear that the function is expected to return number of random bytes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm-space.c remove unneeded semicolonTomas Winkler1-1/+1
Remove unneeded semicolon in tpm2_map_response_header() Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm-interface.c drop unused macrosTomas Winkler1-4/+0
The commit: "tpm_tis: further simplify calculation of ordinal duration" left unused macros, we can drop them now. Fixes compilation warnings: tpm-interface.c:37:0: warning: macro "TPM_PROTECTED_COMMAND" is not used [-Wunused-macros] tpm-interface.c:36:0: warning: macro "TSC_MAX_ORDINAL" is not used [-Wunused-macros] tpm-interface.c:38:0: warning: macro "TPM_CONNECTION_COMMAND" is not used [-Wunused-macros] Fixes: f72864300139 ("tpm_tis: further simplify calculation of ordinal duration") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: add tpm_auto_startup() into tpm-interface.cTomas Winkler3-8/+19
Add wrapper tpm_auto_startup() to tpm-interface.c instead of open coded decision between TPM 1.x and TPM 2.x in tpm-chip.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm_startup functionTomas Winkler4-45/+68
TPM manual startup is used only from within TPM 1.x or TPM 2.x code, hence remove tpm_startup() function from tpm-interface.c and add two static functions implementations tpm1_startup() and tpm2_startup() into to tpm1-cmd.c and tpm2-cmd.c respectively. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.cTomas Winkler3-50/+68
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function tpm1_pm_suspend() in tpm1-cmd.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.cTomas Winkler6-151/+150
Move the tpm1 selftest code functions to tpm1-cmd.c and adjust callers to use the new function names. 1. tpm_pcr_read_dev() to tpm1_pcr_read_dev(). 2. tpm_continue_selftest() to tpm1_continue_selftest(). 3. tpm_do_selftest() to tpm1_do_selftest() Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm1_get_random into tpm1-cmd.cTomas Winkler3-51/+63
Factor out get random implementation from tpm-interface.c into tpm1_get_random function in tpm1-cmd.c. No functional changes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm_getcap to tpm1-cmd.cTomas Winkler5-81/+71
1. Move tpm_getcap to tpm1-cmd. Rename the function to tpm1_getcap. 2. Remove unused tpm_getcap_header with unused constant as this functionality is already implemented using tpm_buf construct. Fixes warning: drivers/char/tpm/tpm-interface.c:452:38: warning: ‘tpm_getcap_header’ defined but not used [-Wunused-const-variable=] static const struct tpm_input_header tpm_getcap_header = { ^~~~~~~~~~~~~~~~~ 3. Drop unused TPM_DIGEST_SIZE. It's already defined in include/linux/tpm.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: move tpm1_pcr_extend to tpm1-cmd.cTomas Winkler3-28/+23
Move tpm1_pcr_extend to tpm1-cmd.c and remove unused pcrextend_header structure and EXTEND_PCR_RESULT_SIZE and EXTEND_PCR_RESULT_BODY_SIZE defines. Fixes warning: drivers/char/tpm/tpm-interface.c:609:38: warning: ‘pcrextend_header’ defined but not used [-Wunused-const-variable=] static const struct tpm_input_header pcrextend_header = { ^~~~~~~~~~~~~~~~ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm_get_timeouts()Tomas Winkler4-123/+135
Factor out tpm_get_timeouts() into tpm2_get_timeouts() and tpm1_get_timeouts() Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: add tpm_calc_ordinal_duration() wrapperTomas Winkler8-17/+25
Add convenient wrapper for ordinal duration computation to remove boiler plate if else statement over TPM2. if (chip->flags & TPM_CHIP_FLAG_TPM2) tpm2_calc_ordinal_duration(chip, ordinal); else tpm1_calc_ordinal_duration(chip, ordinal); Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: factor out tpm 1.x duration calculation to tpm1-cmd.cTomas Winkler8-288/+320
Factor out TPM 1.x commands calculation into tpm1-cmd.c file. and change the prefix from tpm_ to tpm1_. No functional change is done here. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: sort objects in the MakefileTomas Winkler1-3/+12
Make the tpm Makefile a bit more in order by putting objects in one column. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm2: add new tpm2 commands according to TCG 1.36Tomas Winkler2-164/+118
1. TPM2_CC_LAST has moved from 182 to 193 2. Convert tpm2_ordinal_duration from an array into a switch statement, as there are not so many commands that require special duration relative to a number of commands, the switch statement function is called tpm2_ordinal_duration_index(). 3. Fix kdoc comments for tpm2_calc_ordinal_duration(). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: tpm_i2c_nuvoton: use correct command duration for TPM 2.xTomas Winkler1-4/+7
tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0) Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-11tlclk: clean an indentation issue, remove extraneous tabsColin Ian King1-43/+44
Trivial fix to clean up an indentation issue, remove tabs Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 22:23:32 +0000