summaryrefslogtreecommitdiffstats
path: root/drivers/char/ipmi
AgeCommit message (Collapse)AuthorFilesLines
2018-11-27drivers/ipmi: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney1-1/+1
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <openipmi-developer@lists.sourceforge.net> Acked-by: Corey Minyard <cminyard@mvista.com>
2018-10-11ipmi: Fix timer race with module unloadJan Glauber1-4/+6
Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi:ssif: Add support for multi-part transmit messages > 2 partsCorey Minyard1-50/+159
The spec was fairly confusing about how multi-part transmit messages worked, so the original implementation only added support for two part messages. But after talking about it with others and finding something I missed, I think it makes more sense. The spec mentions smbus command 8 in a table at the end of the section on SSIF support as the end transaction. If that works, then all is good and as it should be. However, some implementations seem to use a middle transaction <32 bytes tomark the end because of the confusion in the spec, even though that is an SMBus violation if the number of bytes is zero. So this change adds some tests, if command=8 works, it uses that, otherwise if an empty end transaction works, it uses a middle transaction <32 bytes to mark the end. If neither works, then it limits the size to 63 bytes as it is now. Cc: Harri Hakkarainen <harri@cavium.com> Cc: Bazhenov, Dmitry <dmitry.bazhenov@auriga.com> Cc: Mach, Dat <Dat.Mach@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Remove platform driver overrides and use the id_tableCorey Minyard3-7/+13
The IPMI DMI code was adding platform overrides, which is not really an ideal solution. Switch to using the id_table in the drivers to identify the devices. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Free the address list on module cleanupCorey Minyard1-0/+2
Otherwise the memory is leaked. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Don't leave holes in the I2C address list in the ssif driverCorey Minyard1-6/+5
The algorithm to populate the I2C address list would leave holes in the list on duplicates. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: fix return value of ipmi_set_my_LUNYueHaibing1-1/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN': drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning: variable 'rv' set but not used [-Wunused-but-set-variable] int index, rv = 0; 'rv' should be the correct return value. Fixes: 048f7c3e352e ("ipmi: Properly release srcu locks on error conditions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Convert pr_xxx() to dev_xxx() in the BT codeCorey Minyard1-16/+22
Cleanups, do the replacement and change the levels to the proper ones for the function they are serving, as many were wrong. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base addressCorey Minyard1-0/+4
Looking at logs from systems all over the place, it looks like tons of broken systems exist that set the base address to zero. I can only guess that is some sort of non-standard idea to mark the interface as not being present. It can't be zero, anyway, so just complain and ignore it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi:dmi: Use pr_fmt in the IPMI DMI codeCorey Minyard1-9/+10
It make things a little neater and saves some memory. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Change to ktime_get_ts64()Arnd Bergmann1-3/+3
getnstimeofday64() is deprecated because of the inconsistent naming, it is only a wrapper around ktime_get_real_ts64() now, which could be used as a direct replacement. However, it is generally better to use CLOCK_MONOTONIC timestamps where possible, to avoid glitches with a concurrent settimeofday() or leap second. The uses in ipmi are either for debugging prints or for comparing against a prior timestamp, so using a monotonic ktime_get_ts64() is probably best here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi_si: fix potential integer overflow on large shiftColin Ian King1-1/+1
Shifting unsigned char b by an int type can lead to sign-extension overflow. For example, if b is 0xff and the shift is 24, then top bit is sign-extended so the final value passed to writeq has all the upper 32 bits set. Fix this by casting b to a 64 bit unsigned before the shift. Detected by CoverityScan, CID#1465246 ("Unintended sign extension") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi_si_pci: fix NULL device in ipmi_si error messageMeelis Roos1-2/+2
I noticed that 4.17.0 logs the follwing during ipmi_si setup: ipmi_si 0000:01:04.6: probing via PCI (NULL device *): Could not setup I/O space ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21 Fix the "NULL device *) by moving io.dev assignment before its potential use by ipmi_pci_probe_regspacing(). Result: ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: Could not setup I/O space ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21 Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Convert printk(KERN_<level> to pr_<level>(Joe Perches4-55/+46
Use the more common logging style. Miscellanea: o Convert old style continuation printks without KERN_CONT to pr_cont o Coalesce formats o Realign arguments o Remove unnecessary casts Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Use more common logging stylesJoe Perches8-138/+130
Add and use #define pr_fmt/dev_fmt, and remove #define PFX This also prefixes some messages that were not previously prefixed. Miscellanea: o Convert printk(KERN_<level> to pr_<level>( o Use %s, __func__ where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: msghandler: Add and use pr_fmt and dev_fmt, remove PFXJoe Perches1-27/+24
Standardize the prefixing of output messages using the pr_fmt and dev_fmt mechanisms instead of a separate #define PFX Miscellanea: o Because this message prefix is very long, use a non-standard define of #define pr_fmt(fmt) "%s" fmt, "IPMI message handler: " which removes ~170 bytes of object code in an x86-64 defconfig with ipmi (with even more object code reduction on 32 bit compilations) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18pci:ipmi: Move IPMI PCI class id defines to pci_ids.hCorey Minyard1-5/+0
Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-18ipmi:powernv: Convert ipmi_smi_t to struct ipmi_smiCorey Minyard1-2/+2
Since everything else has been converted. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-08-31ipmi: Fix NULL pointer dereference in ssif_probeGustavo A. R. Silva1-1/+3
There is a potential execution path in which function ssif_info_find() returns NULL, hence there is a NULL pointer dereference when accessing pointer *addr_info* Fix this by null checking *addr_info* before dereferencing it. Addresses-Coverity-ID: 1473145 ("Explicit null dereferenced") Fixes: e333054a91d1 ("ipmi: Fix I2C client removal in the SSIF driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-08-31ipmi: Fix I2C client removal in the SSIF driverCorey Minyard1-11/+6
The SSIF driver was removing any client that came in through the platform interface, but it should only remove clients that it added. On a failure in the probe function, this could result in the following oops when the driver is removed and the client gets unregistered twice: CPU: 107 PID: 30266 Comm: rmmod Not tainted 4.18.0+ #80 Hardware name: Cavium Inc. Saber/Saber, BIOS Cavium reference firmware version 7.0 08/04/2018 pstate: 60400009 (nZCv daif +PAN -UAO) pc : kernfs_find_ns+0x28/0x120 lr : kernfs_find_and_get_ns+0x40/0x60 sp : ffff00002310fb50 x29: ffff00002310fb50 x28: ffff800a8240f800 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: ffff000009073000 x23: ffff000008998b38 x22: 0000000000000000 x21: ffff800ed86de820 x20: 0000000000000000 x19: ffff00000913a1d8 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 5300737265766972 x13: 643d4d4554535953 x12: 0000000000000030 x11: 0000000000000030 x10: 0101010101010101 x9 : ffff800ea06cc3f9 x8 : 0000000000000000 x7 : 0000000000000141 x6 : ffff000009073000 x5 : ffff800adb706b00 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : ffff000008998b38 x0 : ffff000008356760 Process rmmod (pid: 30266, stack limit = 0x00000000e218418d) Call trace: kernfs_find_ns+0x28/0x120 kernfs_find_and_get_ns+0x40/0x60 sysfs_unmerge_group+0x2c/0x6c dpm_sysfs_remove+0x34/0x70 device_del+0x58/0x30c device_unregister+0x30/0x7c i2c_unregister_device+0x84/0x90 [i2c_core] ssif_platform_remove+0x38/0x98 [ipmi_ssif] platform_drv_remove+0x2c/0x6c device_release_driver_internal+0x168/0x1f8 driver_detach+0x50/0xbc bus_remove_driver+0x74/0xe8 driver_unregister+0x34/0x5c platform_driver_unregister+0x20/0x2c cleanup_ipmi_ssif+0x50/0xd82c [ipmi_ssif] __arm64_sys_delete_module+0x1b4/0x220 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc Code: aa1e03e0 aa0203f6 aa0103f7 d503201f (7940e280) ---[ end trace 09f0e34cce8e2d8c ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x23800c38 So track the clients that the SSIF driver adds and only remove those. Reported-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: George Cherian <george.cherian@cavium.com> Cc: <stable@vger.kernel.org> # 4.14.x
2018-08-31ipmi: Move BT capabilities detection to the detect callCorey Minyard1-44/+48
The capabilities detection was being done as part of the normal state machine, but it was possible for it to be running while the upper layers of the IPMI driver were initializing the device, resulting in error and failure to initialize. Move the capabilities detection to the the detect function, so it's done before anything else runs on the device. This also simplifies the state machine and removes some code, as a bonus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Andrew Banman <abanman@hpe.com> Tested-by: Andrew Banman <abanman@hpe.com> Cc: <stable@vger.kernel.org>
2018-08-31ipmi: Rework SMI registration failureCorey Minyard3-46/+37
There were certain situations where ipmi_register_smi() would return a failure, but the interface would still be registered and would need to be unregistered. This is obviously a bad design and resulted in an oops in certain failure cases. If the interface is started up in ipmi_register_smi(), then an error occurs, shut down the interface there so the cleanup can be done properly. Fix the various smi users, too. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Justin Ernst <justin.ernst@hpe.com> Tested-by: Justin Ernst <justin.ernst@hpe.com> Cc: Andrew Banman <abanman@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: <stable@vger.kernel.org> # 4.18.x
2018-08-30ipmi: kcs_bmc: don't change device nameBenjamin Fair1-3/+4
kcs_bmc_alloc(...) calls dev_set_name(...) which is incorrect as most bus driver frameworks, platform_driver in particular, assume that they are able to set the device name themselves. Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-06-24ipmi: kcs_bmc: fix IRQ exception if the channel is not openHaiyue Wang1-21/+10
When kcs_bmc_handle_event calls kcs_force_abort function to handle the not open (no user running) KCS channel transaction, the returned status value -ENODEV causes the low level IRQ handler indicating that the irq was not for him by returning IRQ_NONE. After some time, this IRQ will be treated to be spurious one, and the exception dump happens. irq 30: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.15-npcm750 #1 Hardware name: NPCMX50 Chip family [<c010b264>] (unwind_backtrace) from [<c0106930>] (show_stack+0x20/0x24) [<c0106930>] (show_stack) from [<c03dad38>] (dump_stack+0x8c/0xa0) [<c03dad38>] (dump_stack) from [<c0168810>] (__report_bad_irq+0x3c/0xdc) [<c0168810>] (__report_bad_irq) from [<c0168c34>] (note_interrupt+0x29c/0x2ec) [<c0168c34>] (note_interrupt) from [<c0165c80>] (handle_irq_event_percpu+0x5c/0x68) [<c0165c80>] (handle_irq_event_percpu) from [<c0165cd4>] (handle_irq_event+0x48/0x6c) [<c0165cd4>] (handle_irq_event) from [<c0169664>] (handle_fasteoi_irq+0xc8/0x198) [<c0169664>] (handle_fasteoi_irq) from [<c016529c>] (__handle_domain_irq+0x90/0xe8) [<c016529c>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01de8 to 0xc0a01e30) 1de0: 00002080 c0a6fbc0 00000000 00000000 00000000 c096d294 1e00: 00000000 00000001 dc406400 f03ff100 00000082 c0a01e94 c0a6fbc0 c0a01e38 1e20: 00200102 c01015bc 60000113 ffffffff [<c010752c>] (__irq_svc) from [<c01015bc>] (__do_softirq+0xbc/0x358) [<c01015bc>] (__do_softirq) from [<c011c798>] (irq_exit+0xb8/0xec) [<c011c798>] (irq_exit) from [<c01652a0>] (__handle_domain_irq+0x94/0xe8) [<c01652a0>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01ef8 to 0xc0a01f40) 1ee0: 00000000 000003ae 1f00: dcc0f338 c0111060 c0a00000 c0a0cc44 c0a0cbe4 c0a1c22b c07bc218 00000001 1f20: dcffca40 c0a01f54 c0a01f58 c0a01f48 c0103524 c0103528 60000013 ffffffff [<c010752c>] (__irq_svc) from [<c0103528>] (arch_cpu_idle+0x48/0x4c) [<c0103528>] (arch_cpu_idle) from [<c0681390>] (default_idle_call+0x30/0x3c) [<c0681390>] (default_idle_call) from [<c0156f24>] (do_idle+0xc8/0x134) [<c0156f24>] (do_idle) from [<c015722c>] (cpu_startup_entry+0x28/0x2c) [<c015722c>] (cpu_startup_entry) from [<c067ad74>] (rest_init+0x84/0x88) [<c067ad74>] (rest_init) from [<c0900d44>] (start_kernel+0x388/0x394) [<c0900d44>] (start_kernel) from [<0000807c>] (0x807c) handlers: [<c041c5dc>] npcm7xx_kcs_irq Disabling IRQ #30 It needs to change the returned status from -ENODEV to 0. The -ENODEV was originally used to tell the low level IRQ handler that no user was running, but not consider the IRQ handling desgin. And multiple KCS channels share one IRQ handler, it needs to check the IBF flag before doing force abort. If the IBF is set, after handling, return 0 to low level IRQ handler to indicate that the IRQ is handled. Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-06-24ipmi: Cleanup oops on initialization failureCorey Minyard1-2/+4
Commit 93c303d2045b3 "ipmi_si: Clean up shutdown a bit" didn't copy the behavior of the cleanup in one spot, it needed to check for a non-NULL interface before cleaning it up. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Meelis Roos <mroos@linux.ee>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24ipmi: Properly release srcu locks on error conditionsCorey Minyard1-18/+25
When SRCU was added for handling hotplug, some error conditions were not handled properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-23ipmi: NPCM7xx KCS BMC: enable interrupt to the hostAvi Fishman1-3/+14
Original kcs_bmc_npcm7xx.c was missing enabling to send interrupt to the host on writes to output buffer. This patch fixes it by setting the bits that enables the generation of IRQn events by hardware control based on the status of the OBF flag. Signed-off-by: Avi Fishman <AviFishman70@gmail.com> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-22ipmi:bt: Set the timeout before doing a capabilities checkCorey Minyard1-1/+2
There was one place where the timeout value for an operation was not being set, if a capabilities request was done from idle. Move the timeout value setting to before where that change might be requested. IMHO the cause here is the invisible returns in the macros. Maybe that's a job for later, though. Reported-by: Nordmark Claes <Claes.Nordmark@tieto.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org
2018-05-09ipmi: Remove the proc interfaceCorey Minyard4-486/+0
It has been deprecated long enough, get rid of it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-19ipmi_ssif: Fix uninitialized variable issueGustavo A. R. Silva1-2/+1
Currently, function ssif_remove returns _rv_, which is a variable that is never initialized. Fix this by removing variable _rv_ and return 0 instead. Addresses-Coverity-ID: 1467999 ("Uninitialized scalar variable") Fixes: 6a0d23ed338e ("ipmi: ipmi_unregister_smi() cannot fail, have it return void") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: add an NPCM7xx KCS BMC driverHaiyue Wang3-0/+220
This driver exposes the Keyboard Controller Style (KCS) interface on Novoton NPCM7xx SoCs as a character device. Such SOCs are commonly used as a BaseBoard Management Controller (BMC) on a server board, and KCS interface is commonly used to perform the in-band IPMI communication between the server and its BMC. Signed-off-by: Avi Fishman <avifishman70@gmail.com> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_si: Clean up shutdown a bitCorey Minyard1-21/+11
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_si: Rename intf_num to si_numCorey Minyard1-9/+9
There is already an intf_num in the main IPMI device structure, use a different name in the ipmi_si code to avoid confusion. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove smi->intf checksCorey Minyard2-17/+6
Due to changes in the way shutdown is done, it is no longer required to check that the interface is set. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Get rid of unused intf_numCorey Minyard1-5/+0
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: ipmi_unregister_smi() cannot fail, have it return voidCorey Minyard3-10/+3
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_devintf: Add an error return on invalid ioctlsCorey Minyard1-0/+4
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Remove usecount handlingCorey Minyard1-21/+0
Now that we can handle hot remove there is no need for usecounts for interfaces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove condition on interface shutdownCorey Minyard1-2/+1
Now that the interfaces have shutdown handlers, this no longer needs to be conditional. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Convert over to a shutdown handlerCorey Minyard1-24/+31
Move the shutdown handling to a shutdown function called from the IPMI core code. That makes for a cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_si: Convert over to a shutdown handlerCorey Minyard1-13/+18
Move the shutdown handling to a shutdown function called from the IPMI core code. That makes for a cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rework locking and shutdown for hot removeCorey Minyard1-210/+280
To handle hot remove of interfaces, a lot of rework had to be done to the locking. Several things were switched over to srcu and shutdown for users and interfaces was added for cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Fix some counter issuesCorey Minyard1-31/+45
Counters would not be pegged properly on some errors. Have deliver_response() return an error so the counters can be incremented properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Change ipmi_smi_t to struct ipmi_smi *Corey Minyard3-95/+99
Get rid of this coding style violation in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rename ipmi_user_t to struct ipmi_user *Corey Minyard4-47/+47
Get rid of that non-compliance in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_devintf: Small lock reworkCorey Minyard1-55/+28
The mutex didn't really serve any useful purpose, from what I can tell, and it would just get in the way. So remove it. Removing that required a mutex around the default value setting and getting, so just use the receive mutex for that. Also pull the fasync stuff outside of the lock for adding the data to the queue, since it didn't need to be there. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up some style issues in the message handlerCorey Minyard1-48/+35
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Break up i_ipmi_requestCorey Minyard1-310/+344
It was huge, and easily broken into pieces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi:devintf: Clean up some coding style issuesCorey Minyard1-22/+18
Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 05:36:48 +0000