summaryrefslogtreecommitdiffstats
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-1/+16
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds4-20/+73
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-08-03Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+4
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, there are many patches addressing minor issues in existing DTS files, such as DTC warnings, or adding support for additional peripherals. There are three added SoCs in existing product families: - Amazon: Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs, otherwise known as AL73400 or first-generation Graviton, and following the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips. This one is added together with the official Evaluation platform. - Qualcomm: The Snapdragon SDM630 platform is a family of mid-range mobile phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total of five end-user products are added based on these, all Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra. - Renesas: RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G family, and apparently closely related to the RZ/G2N and RZ/G2M models we already support but has a faster GPU and additional on-chip peripherals. It is added along with the HopeRun HiHope RZ/G2H development board A small number of new boards for already supported SoCs also debut: - Allwinner sunxi: Only one new machine, revision v1.2 of the Pine64 PinePhone (non-Android) smartphone, containing minor changes compared to earlier versions. - Amlogic Meson: WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box - Aspeed: EthanolX is AMD's EPYC data center rerence platform, using an ASpeed AST2600 baseboard management controller. - Mediatek: Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based on the MT8183 (Helio P60t) SoC. - Nvidia Tegra: ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android tablets from around 2012 using Tegra 3 and Tegra 2, respectively. Thanks to PostmarketOS, these can now run mainline kernels and become useful again. The Jetson Xavier NX Developer Kit uses a SoM and carrier board for the Tegra194, their latest 64-bit chip based on Carmel CPU cores and Volta graphics. - NXP i.MX: Five new boards based on the 32-bit i.MX6 series are added: The MYiR MYS-6ULX single-board computer, and four different models of industrial computers from Protonic. - Qualcomm: MikroTik RouterBoard 3011 is a rackmounted router based on the 32-bit IPQ8064 networking SoC Three older phones get added, the Snapdragon 808 (msm8992) based Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia Z5. - Renesas: In addition to the HiHope RZ/G2H board mentioned above, we gain support for board versions 3.0 and 4.0 of the earlier RZ/G2M and RZ/G2N reference boards. Beacon EmbeddedWorks adds another SoM+Carrier development board for RZ/G2M. - Rockchips: Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is based on, using the high-end 32-bit rk3288 SoC. Notable updates to existing platforms are usually for added on-chip peripherals, including: - ASpeed AST2xxx (various) - Allwinner (cpufreq, thermal, Pinephone touchscreen) - Amlogic Meson (audio, gpu dvdfs, board updates) - Arm Versatile - Broadcom (board updates for switch ports, Raspberry pi clock updates) - Hisilicon (various) - Intel/Altera SoCFPGA (various) - Marvell Armada 7xxx/8xxx (smmu) - Marvell MMP (GPU on mmp2/mmp3) - Mediatek mt8183 (USB, pericfg) - NXP Layerscape (VPU, thermal, DSPI) - NXP i.MX (VPU, bindings, board updates) - Nvidia Tegra194 (GPU) - Qualcomm (GPU, Interconnect, ...) - Renesas R-Car (SPI, IPMMU, board updates) - STMicroelectronics STM32 (various) - Samsung Exynos (various) - Socionext Uniphier (updates to serial, and pcie) - TI K3 (serdes, usb3, audio, sd, chipid) - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)" * tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits) arm64: dts: meson: odroid-n2: add jack audio output support arm64: dts: meson: odroid-n2: enable audio loopback ARM: dts: berlin: Align L2 cache-controller nodename with dtschema arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree arm64: dts: qcom: msm8992: Add RPMCC node arm64: dts: qcom: msm8992: Add PSCI support. arm64: dts: qcom: msm8992: Add PMU node arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device arm64: dts: qcom: msm8992: Add a SCM node arm64: dts: qcom: msm8992: Add a proper CPU map arm64: dts: qcom: bullhead: Move UART pinctrl to SoC arm64: dts: qcom: bullhead: Add qcom,msm-id arm64: dts: qcom: msm8992: Fix SDHCI1 arm64: dts: qcom: msm8992: Modernize the DTS style arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. arm64: dts: qcom: msm8994: Add support for SMD RPM arm64: dts: qcom: msm8992: Add a label to rpm-requests ...
2020-08-03Merge tag 'arm64-upstream' of ↵Linus Torvalds4-56/+96
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 and cross-arch updates from Catalin Marinas: "Here's a slightly wider-spread set of updates for 5.9. Going outside the usual arch/arm64/ area is the removal of read_barrier_depends() series from Will and the MSI/IOMMU ID translation series from Lorenzo. The notable arm64 updates include ARMv8.4 TLBI range operations and translation level hint, time namespace support, and perf. Summary: - Removal of the tremendously unpopular read_barrier_depends() barrier, which is a NOP on all architectures apart from Alpha, in favour of allowing architectures to override READ_ONCE() and do whatever dance they need to do to ensure address dependencies provide LOAD -> LOAD/STORE ordering. This work also offers a potential solution if compilers are shown to convert LOAD -> LOAD address dependencies into control dependencies (e.g. under LTO), as weakly ordered architectures will effectively be able to upgrade READ_ONCE() to smp_load_acquire(). The latter case is not used yet, but will be discussed further at LPC. - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter and apply the resulting changes to the device ID space provided by the Freescale FSL bus. - arm64 support for TLBI range operations and translation table level hints (part of the ARMv8.4 architecture version). - Time namespace support for arm64. - Export the virtual and physical address sizes in vmcoreinfo for makedumpfile and crash utilities. - CPU feature handling cleanups and checks for programmer errors (overlapping bit-fields). - ACPI updates for arm64: disallow AML accesses to EFI code regions and kernel memory. - perf updates for arm64. - Miscellaneous fixes and cleanups, most notably PLT counting optimisation for module loading, recordmcount fix to ignore relocations other than R_AARCH64_CALL26, CMA areas reserved for gigantic pages on 16K and 64K configurations. - Trivial typos, duplicate words" Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits) arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack arm64/mm: save memory access in check_and_switch_context() fast switch path arm64: sigcontext.h: delete duplicated word arm64: ptrace.h: delete duplicated word arm64: pgtable-hwdef.h: delete duplicated words bus: fsl-mc: Add ACPI support for fsl-mc bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver of/irq: Make of_msi_map_rid() PCI bus agnostic of/irq: make of_msi_map_get_device_domain() bus agnostic dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus of/device: Add input id to of_dma_configure() of/iommu: Make of_map_rid() PCI agnostic ACPI/IORT: Add an input ID to acpi_dma_configure() ACPI/IORT: Remove useless PCI bus walk ACPI/IORT: Make iort_msi_map_rid() PCI agnostic ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC arm64: enable time namespace support arm64/vdso: Restrict splitting VVAR VMA arm64/vdso: Handle faults on timens page ...
2020-07-28bus: fsl-mc: Add ACPI support for fsl-mcMakarand Pawagi2-33/+77
Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table to extract memory and other resources. Interrupt (GIC ITS) information is extracted from the MADT table by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c. IORT table is parsed to configure DMA. Signed-off-by: Makarand Pawagi <makarand.pawagi@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-13-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28bus/fsl-mc: Refactor the MSI domain creation in the DPRC driverDiana Craciun4-39/+33
The DPRC driver is not taking into account the msi-map property and assumes that the icid is the same as the stream ID. Although this assumption is correct, generalize the code to include a translation between icid and streamID. Furthermore do not just copy the MSI domain from parent (for child containers), but use the information provided by the msi-map property. If the msi-map property is missing from the device tree retain the old behaviour for backward compatibility ie the child DPRC objects inherit the MSI domain from the parent. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-12-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28of/device: Add input id to of_dma_configure()Lorenzo Pieralisi1-1/+3
Devices sitting on proprietary busses have a device ID space that is owned by the respective bus and related firmware bindings. In order to let the generic OF layer handle the input translations to an IOMMU id, for such busses the current of_dma_configure() interface should be extended in order to allow the bus layer to provide the device input id parameter - that is retrieved/assigned in bus specific code and firmware. Augment of_dma_configure() to add an optional input_id parameter, leaving current functionality unchanged. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman1-0/+22
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-25Merge tag 'timers-urgent-2020-07-25' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fix from Ingo Molnar: "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's" * tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
2020-07-23bus: fsl-mc: probe the allocatable objects firstGrigore Popescu1-17/+40
Because the DPNIs are probed before DPMCPs and other objects that need to be allocated, messages like "No more resources of type X left" are printed by the fsl-mc bus driver. This patch resolves the issue by probing the allocatable objects first and then any other object that may use them. Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-4-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23bus: fsl-mc: use raw spin lock to serialize mc cmdsLaurentiu Tudor2-3/+3
Replace the spinlock that serializes the MC commands with a raw spinlock. This is needed for the RT kernel because there are MC commands sent in interrupt context. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-3-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23bus: fsl-mc: add missing device typesIoana Ciornei1-0/+30
The MC bus has different types of devices that can be discovered on the bus. Add the missing device types. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-2-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4Tony Lindgren1-0/+22
Carlos Hernandez <ceh@ti.com> reported that we now have a suspend and resume regresssion on am3 and am4 compared to the earlier kernels. While suspend and resume works with v5.8-rc3, we now get errors with rtcwake: pm33xx pm33xx: PM: Could not transition all powerdomains to target state ... rtcwake: write error This is because we now fail to idle the system timer clocks that the idle code checks and the error gets propagated to the rtcwake. Turns out there are several issues that need to be fixed: 1. Ignore no-idle and no-reset configured timers for the ti-sysc interconnect target driver as otherwise it will keep the system timer clocks enabled 2. Toggle the system timer functional clock for suspend for am3 and am4 (but not for clocksource on am3) 3. Only reconfigure type1 timers in dmtimer_systimer_disable() 4. Use of_machine_is_compatible() instead of of_device_is_compatible() for checking the SoC type Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200713162601.6829-1-tony@atomide.com
2020-07-21bus: cdmm: Add MIPS R5 arch supportSerge Semin1-1/+1
CDMM may be available not only on MIPS R2 architectures, but also on newer MIPS R5 chips. For instance our P5600 chip has one. Let's mark the CDMM bus being supported for that MIPS arch too. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-21mips: cdmm: Add mti,mips-cdmm dtb node supportSerge Semin1-0/+15
Since having and mapping the CDMM block is platform specific, then instead of just returning a zero-address, lets make the default CDMM base address search method (mips_cdmm_phys_base()) to do something useful. For instance to find the address in a dedicated dtb-node in order to support of-based platforms by default. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-13bus: ti-sysc: Add missing quirk flags for usb_host_hsTony Lindgren1-2/+4
Similar to what we have for the legacy platform data, we need to configure SWSUP_SIDLE and SWSUP_MSTANDBY quirks for usb_host_hs. These are needed to drop the legacy platform data for usb_host_hs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-02bus: ti-sysc: Do not disable on suspend for no-idleTony Lindgren1-2/+4
If we have "ti,no-idle" specified for a module we must not disable the the module on suspend to keep things backwards compatible. Fixes: 386cb76681ca ("bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init") Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-02bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirkTony Lindgren1-2/+2
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with RTC probe: BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:1736 ... (sysc_quirk_rtc) from [<c060d01c>] (sysc_write_sysconfig+0x1c/0x60) (sysc_write_sysconfig) from [<c060d9f4>] (sysc_enable_module+0x11c/0x274) (sysc_enable_module) from [<c060f37c>] (sysc_probe+0xe9c/0x1380) (sysc_probe) from [<c06e9384>] (platform_drv_probe+0x48/0x98) Fixes: e8639e1c986a ("bus: ti-sysc: Handle module unlock quirk needed for some RTC") Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-02bus: ti-sysc: Fix wakeirq sleeping function called from invalid contextTony Lindgren1-7/+6
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with wakeirqs and serial console idled: BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:242 ... (sysc_wait_softreset) from [<c0606894>] (sysc_enable_module+0x48/0x274) (sysc_enable_module) from [<c0606c5c>] (sysc_runtime_resume+0x19c/0x1d8) (sysc_runtime_resume) from [<c0606cf0>] (sysc_child_runtime_resume+0x58/0x84) (sysc_child_runtime_resume) from [<c06eb7bc>] (__rpm_callback+0x30/0x12c) (__rpm_callback) from [<c06eb8d8>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c06eb434>] (rpm_resume+0x638/0x7fc) (rpm_resume) from [<c06eb658>] (__pm_runtime_resume+0x60/0x9c) (__pm_runtime_resume) from [<c06edc08>] (handle_threaded_wake_irq+0x24/0x60) (handle_threaded_wake_irq) from [<c01befec>] (irq_thread_fn+0x1c/0x78) (irq_thread_fn) from [<c01bf30c>] (irq_thread+0x140/0x26c) We have __pm_runtime_resume() call the sysc_runtime_resume() with spinlock held and interrupts disabled. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-28Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of ↵Arnd Bergmann1-24/+74
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-16Merge tag 'v5.8-rc1' into fixesTony Lindgren12-234/+1571
Linux 5.8-rc1
2020-06-10Revert "bus: ti-sysc: Increase max softreset wait"Tony Lindgren1-1/+1
This reverts commit 636338d7968e47c7f2e0b772a2a825ad932883fb. This patch is not a proper fixes the i2c2 timeouts are still happening in some cases. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-08Merge branch 'fixes-v5.7' into fixesTony Lindgren4-21/+15
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds5-156/+362
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds4-0/+767
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-06-04Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-78/+442
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-06-03bus: ti-sysc: Increase max softreset waitTony Lindgren1-1/+1
Otherwise we can get "OCP softreset timed out" warnings occasionally at least for i2c2 on omap4 now that we check the OCP softreset completed bit on enable. Reported-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-03bus: ti-sysc: Fix uninitialized framedonetv_irqTony Lindgren1-1/+2
We are currently only setting the framedonetv_irq disabled for the SoCs that don't have it. But we are never setting it enabled for the SoCs that have it. Let's initialized it to true by default. Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk") Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-03bus: ti-sysc: Ignore clockactivity unless specified as a quirkTony Lindgren1-3/+6
We must ignore the clockactivity bit for most modules and not set it unless specified for the module with SYSC_QUIRK_USE_CLOCKACT. Otherwise the interface clock can be automatically gated constantly causing unexpected performance issues. Fixes: ae9ae12e9daa ("bus: ti-sysc: Handle clockactivity for enable and disable") Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-06-03bus: ti-sysc: Use optional clocks on for enable and wait for softreset bitTony Lindgren1-20/+60
Some modules reset automatically when idled, and when re-enabled, we must wait for the automatic OCP softreset to complete. And if optional clocks are configured, we need to keep the clocks on while waiting for the reset to complete. Let's fix the issue by moving the OCP softreset code to a separate function sysc_wait_softreset(), and call it also from sysc_enable_module() with the optional clocks enabled. This is based on what we're already doing for legacy platform data booting in _enable_sysc(). Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk") Reported-by: Faiz Abbas <faiz_abbas@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-30bus: ti-sysc: Flush posted write on enable and disableTony Lindgren1-0/+6
Looks like we're missing flush of posted write after module enable and disable. I've seen occasional errors accessing various modules, and it is suspected that the lack of posted writes can also cause random reboots. The errors we can see are similar to the one below from spi for example: 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during Functional access ... mcspi_wait_for_reg_bit omap2_mcspi_transfer_one spi_transfer_one_message ... We also want to also flush posted write for disable. The clkctrl clock disable happens after module disable, and we don't want to have the module potentially stay active while we're trying to disable the clock. Fixes: d59b60564cbf ("bus: ti-sysc: Add generic enable/disable functions") Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-28bus: bt1-axi: Build the driver into the kernelSerge Semin1-1/+1
Alas the method trigger_all_cpu_backtrace() isn't exported by the kernel, but we need to have it called in case of the bus errors detected to get a better description of a possible cause of the error. Let's disable the ability to build the driver as a loadable kernel module then. Note In future the driver will support the AXI-bus interconnect capability, so we'd have to make it built into the kernel anyway. Link: https://lore.kernel.org/r/20200528193113.17372-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Build the driver into the kernelSerge Semin1-1/+1
Seeing trigger_all_cpu_backtrace() isn't exported from the kernel and since calling it is a very important part of driver, which may provide a better description of a possible cause of the error, let's disable the ability to build the driver as a loadable kernel module. Link: https://lore.kernel.org/r/20200528193113.17372-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-axi: Use sysfs_streq instead of strncmpSerge Semin1-2/+2
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-axi: Optimize the return points in the driverSerge Semin1-12/+6
It's better to have a single return statement where it's applicable instead of returning from a conditional statement if-clause. Let's do this in the request registers, clock and IRQ methods. Link: https://lore.kernel.org/r/20200528145050.5203-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use sysfs_streq instead of strncmpSerge Semin1-2/+2
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs methodSerge Semin1-4/+2
Indeed it's more optimal to use the PTR_ERR_OR_ZERO() macro there instead of having two return points. Link: https://lore.kernel.org/r/20200528145050.5203-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Fix show/store callback identationsSerge Semin1-4/+4
After fixing the sysfs calback return value the functions argumnets identations have been left as before the fix. That made the argments declarations being unaligned with respect to the space surrounded by the parentheses. Link: https://lore.kernel.org/r/20200528145050.5203-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Include linux/io.hSerge Semin1-0/+1
It must be included since we are using readl() method here. Link: https://lore.kernel.org/r/20200528145050.5203-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: Add Baikal-T1 APB-bus driverSerge Semin3-0/+438
Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs. IO requests are routed to this bus by means of the DW AMBA 3 AXI Interconnect. In case if an attempted APB transaction stays with no response for a pre-defined time an interrupt occurs and the bus gets freed for a next operation. This driver provides the interrupt handler to detect the erroneous address, prints an error message about the address fault, updates an errors counter. The counter and the APB-bus operations timeout can be accessed via corresponding sysfs nodes. A dedicated sysfs-node can be also used to artificially cause the bus errors described above. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: Add Baikal-T1 AXI-bus driverSerge Semin3-0/+336
AXI3-bus is the main communication bus connecting all high-speed peripheral IP-cores with RAM controller and MIPS P5600 cores on Baikal-T1 SoC. Bus traffic arbitration is done by means of DW AMBA 3 AXI Interconnect (so called AXI Main Interconnect) routing IO requests from one SoC block to another. This driver provides a way to detect any bus protocol errors and device not responding situations by means of an embedded on top of the interconnect errors handler block (EHB). AXI Interconnect QoS arbitration tuning is currently unsupported. The bus doesn't provide a way to detect the interconnected devices, so they are supposed to be statically defined like by means of the simple-bus sub-nodes. [arnd: fix build warnings for missing includes and wrong return types] Link: https://lore.kernel.org/r/20200526125928.17096-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'omap-for-v5.8/timer-signed' of ↵Arnd Bergmann1-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc System timer changes for omaps for v5.8 merge window This series of changes finally gets the legacy omap dual-mode timer and 32k counter system timer updated to use drivers/clocksource and device tree data. And we can now remove the unused legacy platform data. These changes are based on an immutable clocksource branch set up by Daniel Lezcano. * tag 'omap-for-v5.8/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ARM: dts: Configure system timers for omap3 ARM: dts: Configure system timers for omap5 and dra7 ARM: dts: Configure system timers for omap4 ARM: dts: Configure system timers for am437x ARM: dts: Configure system timers for am335x ARM: OMAP2+: Add omap_init_time_of() bus: ti-sysc: Ignore timer12 on secure omap3 clk: ti: dm816: enable sysclk6_ck on init clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly Link: https://lore.kernel.org/r/pull-1590169577-735045@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()Wei Yongjun1-2/+2
In case of error, the function of_find_matching_node() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Link: https://lore.kernel.org/r/20200525091634.8274-1-linus.walleij@linaro.org Fixes: ccea5e8a5918 ("bus: Add driver for Integrator/AP logic modules") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200520032150.165388-1-weiyongjun1@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-22bus: mhi: core: Handle syserr during power_upJeffrey Hugo1-0/+27
The MHI device may be in the syserr state when we attempt to init it in power_up(). Since we have no local state, the handling is simple - reset the device and wait for it to transition out of the reset state. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle write lock properly in mhi_pm_m0_transitionHemant Kumar1-3/+7
Take write lock only to protect db_mode member of mhi channel. This allows rest of the mhi channels to just take read lock which fine grains the locking. It prevents channel readers to starve if they try to enter critical section after a writer. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-14-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Do not process SYS_ERROR if RDDM is supportedHemant Kumar1-3/+8
Devices that support RDDM do not require processing SYS_ERROR as it is deemed redundant. Avoid SYS_ERROR processing if RDDM is supported by the device. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowedHemant Kumar1-7/+14
Driver continues handling of BHI interrupt even if MHI register access is not allowed. By doing so it calls the status call back and performs early notification for the MHI client. This is not needed when MHI register access is not allowed. Hence skip the handling in this case and return. Also add debug log to print device state, local EE and device EE when reg access is valid. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle disable transitions in state workerHemant Kumar3-1/+12
Mission mode transition is handled by state worker thread but power off is not. There is a possibility while mission mode transition is in progress which calls MHI client driver probe, power off is issued by MHI controller. This results into client driver probe and remove running in parallel and causes use after free situation. By queuing disable transition work when mission mode is in progress prevents the race condition. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Remove the system error worker threadHemant Kumar4-23/+20
Remove the system error worker thread and instead have the execution environment worker handle that transition to serialize processing and avoid any possible race conditions during shutdown. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>