summaryrefslogtreecommitdiffstats
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2018-10-29Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-126/+48
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-26Merge tag 'iommu-updates-v4.20' of ↵Linus Torvalds1-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Debugfs support for the Intel VT-d driver. When enabled, it now also exposes some of its internal data structures to user-space for debugging purposes. - ARM-SMMU driver now uses the generic deferred flushing and fast-path iova allocation code. This is expected to be a major performance improvement, as this allocation path scales a lot better. - Support for r8a7744 in the Renesas iommu driver - Couple of minor fixes and improvements all over the place * tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits) iommu/arm-smmu-v3: Remove unnecessary wrapper function iommu/arm-smmu-v3: Add SPDX header iommu/amd: Add default branch in amd_iommu_capable() dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support iommu/amd: Move iommu_init_pci() to .init section iommu/arm-smmu: Support non-strict mode iommu/io-pgtable-arm-v7s: Add support for non-strict mode iommu/arm-smmu-v3: Add support for non-strict mode iommu/io-pgtable-arm: Add support for non-strict mode iommu: Add "iommu.strict" command line option iommu/dma: Add support for non-strict mode iommu/arm-smmu: Ensure that page-table updates are visible before TLBI iommu/arm-smmu-v3: Implement flush_iotlb_all hook iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout iommu/io-pgtable-arm: Fix race handling in split_blk_unmap() iommu/arm-smmu-v3: Fix a couple of minor comment typos iommu: Fix a typo iommu: Remove .domain_{get,set}_windows iommu: Tidy up window attributes ...
2018-10-25Merge branch 'linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-10-23Merge tag 'gpio-v4.20-1' of ↵Linus Torvalds1-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver" * tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits) gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip() gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip() gpio: Drop parent irq assignment during cascade setup mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap gpio: fix SNPS_CREG kconfig dependency warning gpiolib: Initialize gdev field before is used gpio: fix kernel-doc after devres.c file rename gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip gpio: syscon: Fix possible NULL ptr usage gpiolib: Show correct direction from the beginning pinctrl: msm: Use init_valid_mask exported function gpiolib: Add init_valid_mask exported function GPIO: add single-register GPIO via CREG driver dt-bindings: Document the Synopsys GPIO via CREG bindings gpio: mockup: use device properties instead of platform_data gpio: Slightly more helpful debugfs gpio: omap: Remove set but not used variable 'dev' gpio: omap: drop omap_gpio_list Accept partial 'gpio-line-names' property. gpio: omap: get rid of the conditional PM runtime calls ...
2018-10-04Merge tag 'omap-for-v4.20/ti-sysc-take2-signed' of ↵Arnd Bergmann1-123/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI sysc driver changes for v4.20 merge window This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device detection happen mostly only if #define DEBUG is set. Few core devices still need to be detected to set legacy quirks. We also add support for booting am335x, am437x and dra7 SoCs with L4 devices defined in device tree instead of legacy platform data. And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and dropping the custom functions that were attempting to work around issues that really turned out to be child device driver related issues. Apologies for a late pull request, debugging the suspend issues took a while and I did not want to send these changes until that got sorted out. * tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS bus: ti-sysc: Make some warnings debug only bus: ti-sysc: Detect devices for debug on dra7 bus: ti-sysc: Detect timer and gpio on dra7 bus: ti-sysc: Detect devices on am335x when DEBUG is enabled bus: ti-sysc: Detect more devices on am473x for debugging bus: ti-sysc: Update revision masks to support am437x bus: ti-sysc: Defer suspend as needed Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-01bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPSTony Lindgren1-111/+4
As Grygorii Strashko pointed out, the runtime PM use count of the children can be whatever at suspend and we should not use it. So let's just suspend ti-sysc at noirq level and get rid of some code. Let's also remove the PM_SLEEP ifdef and use __maybe_unused as the PM code already deals with the ifdefs. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-10-01bus: imx-weim: drop unnecessary DT node name NULL checkRob Herring1-3/+0
Checking the child node names is pointless as the DT node name can never be NULL, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-28bus: ti-sysc: Make some warnings debug onlyTony Lindgren1-2/+2
We're currently warning about busy children on suspend in sysc_child_suspend_noirq() but the legacy code omap_device does not do that. Let's just make it dev_dbg() instead of dev_warn(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28bus: ti-sysc: Detect devices for debug on dra7Tony Lindgren1-5/+8
We want to see the names of detected devices when DEBUG is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28bus: ti-sysc: Detect timer and gpio on dra7Tony Lindgren1-2/+4
We need to detect timer and gpio on dra7 because of the SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28Merge commit '4f3530f4a41d49c41015020cd9a5ed5c95b5d2db' into ↵Tony Lindgren1-20/+17
omap-for-v4.20/ti-sysc
2018-09-28bus: mvebu-mbus: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28bus: fsl-mc: Convert to using %pOFn instead of device_node.nameRob Herring1-3/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25bus/fsl-mc: set coherent dma mask for devices on fsl-mc busNipun Gupta1-0/+1
of_dma_configure() API expects coherent_dma_mask to be correctly set in the devices. This patch does the needful. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25bus/fsl-mc: support dma configure for devices on fsl-mc busNipun Gupta1-4/+11
This patch adds support of dma configuration for devices on fsl-mc bus using 'dma_configure' callback for busses. Also, directly calling arch_setup_dma_ops is removed from the fsl-mc bus. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-24bus: ti-sysc: Detect devices on am335x when DEBUG is enabledTony Lindgren1-2/+6
When debug is enabled, we want to see what devices we're detecting to make things a bit easier for us. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24bus: ti-sysc: Detect more devices on am473x for debuggingTony Lindgren1-3/+20
When debug is enabled, we want to see what devices we're detecting to make things a bit easier for us. Many of these devices will also be available on am335x and dra7, and some just need updating the revision register mask. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24bus: ti-sysc: Update revision masks to support am437xTony Lindgren1-2/+4
We need to detect few new devices to tag for noirq_suspend and pm_runtime_irq_safe to avoid causing regressions compared to legacy platform data booting. Let's update i2c, gpio, uart and wdt revision masks to detect them on am437x. Note that we can remove the second wdt entry with the updated mask. Note that we also have some uarts with a different revision register. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-24bus: ti-sysc: Defer suspend as neededTony Lindgren1-57/+61
We don't care when we suspend but some our children do. In order to avoid tagging various modules with SYSC_QUIRK_RESOURCE_PROVIDER, let's do it automatically by tagging modules that are busy on suspend for noirq suspend. This way we can just do module detection on define DEBUG. Note that we still need to keep SYSC_QUIRK_LEGACY_IDLE flag around so the our legacy single-child devices that set pm_runtime_irq_safe() can manage the interconnect target module themselves. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-21bus: fsl-mc: add support for dpseci device typeHoria Geantă1-0/+5
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik1-2/+3
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik1-11/+4
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2Tony Lindgren5-1/+129
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-0/+123
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-22bus: ti-sysc: Fix no_console_suspend handlingTony Lindgren1-3/+3
If no_console_suspend is set, we should keep console enabled during suspend. Lets fix this by only producing a warning if we can't idle hardware during suspend. Fixes: ef55f8215a78 ("bus: ti-sysc: Improve suspend and resume handling") Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-17Merge tag 'vla-leftovers-v4.19-rc1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull VLA removal leftovers from Kees Cook: - bus/imx-weim: Use maximum register count to avoid VLA - drm/i2c/tda9950: Use maximum CEC message size to avoid VLA * tag 'vla-leftovers-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: bus: imx-weim: Remove VLA usage drm/i2c: tda9950: Remove VLA usage
2018-08-17bus: ti-sysc: Fix module register ioremap for larger offsetsTony Lindgren1-17/+14
We can have the interconnect target module control registers pretty much anywhere within the module range. The current code attempts an incomplete optimization of the ioremap size but does it wrong and it only works for registers at the beginning of the module. Let's just use the largest control register to calculate the ioremap size. The ioremapped range is for most part cached anyways so there is no need for size optimization. Let's also update the comments accordingly. Fixes: 0eecc636e5a2 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver") Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-13bus: imx-weim: Remove VLA usageKees Cook1-1/+6
In the quest to remove all stack VLA usage from the kernel[1], this switches to using a maximum size and adds a sanity check. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawnguo@kernel.org>
2018-07-26Merge tag 'sunxi-drivers-for-4.19' of ↵Olof Johansson3-0/+59
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers Allwinner drivers changes for 4.19 There's been work for this release cycles in both the SRAM controller driver in order to support more SoCs, as part of our VPU work, but also to enable the EMAC on the A64 (that needs to poke at registers within the same register space). Some work has been needed too to represent the bus to the display engine controllers that all need an SRAM to be mapped to the CPU to be able to access those controllers' registers. * tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: Add the A13, A23 and H3 system control compatibles drivers: soc: sunxi: Add support for the C1 SRAM region dt-bindings: sram: sunxi: Populate valid sections compatibles dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings soc: sunxi: sram: Add dt match for the A10 system-control compatible dt-bindings: sram: sunxi: Introduce new A10 binding for system-control bus: add bus driver for accessing Allwinner A64 DE2 dt-bindings: add binding for the Allwinner A64 DE2 bus soc: sunxi: sram: Add updated compatible string for A64 system control dt-bindings: sram: Rename A64 SRAM controller compatible soc: sunxi: export a regmap for EMAC clock reg on A64 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-09bus: ti-sysc: Add support for software resetFaiz Abbas1-0/+46
Add support for the software reset of a target interconnect module using its sysconfig and sysstatus registers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> [tony@atomide.com: updated to check if sysconfig exists] Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-09bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76xFaiz Abbas1-0/+18
The dra76x MCAN generic interconnect module has a its own format for the bits in the control registers. Therefore add a new module type, new regbits and new capabilities specific to the MCAN module. Acked-by: Rob Herring <robh@kernel.org> CC: Tony Lindgren <tony@atomide.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02bus: ti-sysc: Use 2-factor allocator argumentsKees Cook1-4/+4
This adjusts the allocator calls to use 2-factor argument call style, as done treewide already for improved defense against allocation overflows. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-06-28bus: add bus driver for accessing Allwinner A64 DE2Icenowy Zheng3-0/+59
The "Display Engine 2.0" (usually called DE2) on the Allwinner A64 SoC is different from the ones on other Allwinner SoCs. It requires a SRAM region to be claimed, otherwise all DE2 subblocks won't be accessible. Add a bus driver for the Allwinner A64 DE2 part which claims the SRAM region when probing. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-3/+3
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-65/+97
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-11Merge tag 'armsoc-soc' of ↵Linus Torvalds1-43/+345
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-05-25Merge tag 'omap-for-v4.18/ti-sysc-fix-signed' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc One ti-sysc fix for v4.18 merge window This fixes an array access errors if there are more optional clocks than one. * tag 'omap-for-v4.18/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix optional clocks array access Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-18bus: ti-sysc: Fix optional clocks array accessTony Lindgren1-1/+1
We should be checking ddata->clocks[i] instead of clock_names[i] for the optional clocks. Currently this just happens to work for the typical case of one fck and one optional clock. Fixes: 09dfe5810762 ("bus: ti-sysc: Add handling for clkctrl opt clocks") Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-14Merge tag 'hisi-drivers-for-4.18' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson2-63/+97
into next/drivers ARM64: hisi: SoC driver updates for 4.18 - Update hisi LPC bus driver to use the platform driver APIs other than the MFD APIs to support connected device like UART * tag 'hisi-drivers-for-4.18' of git://github.com/hisilicon/linux-hisi: HISI LPC: Add ACPI UART support HISI LPC: Re-Add ACPI child enumeration support HISI LPC: Stop using MFD APIs Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'v4.17-rc5' into irq/core, to pick up fixesIngo Molnar1-0/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14bus: arm-cci: remove unnecessary unreachable()Stefan Agner1-2/+0
Mixing asm and C code is not recommended in a naked function by gcc and leads to an error when using clang: drivers/bus/arm-cci.c:2107:2: error: non-ASM statement in naked function is not supported unreachable(); ^ While the function is marked __naked it actually properly return in asm. There is no need for the unreachable() call. GCC 7.2 generates identical object files before and after, other than (for obvious reasons) the line numbers generated by WANT_WARN_ON_SLOWPATH for all the WARN()s appearing later in the file. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'omap-for-v4.18/ti-sysc-signed' of ↵Olof Johansson1-43/+345
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc ti-sysc driver related changes for omap variants This series improves the ti-sysc interconnect target module driver to the point where a most of SoC can be booted with interconnect target module data configured in device tree instead of legacy platform data. The related device tree changes need some more work though, and can wait for v4.19. Also some drivers using nested interconnects like DSS need more work. We can now remove the unused pm-noop code that is not doing anything any longer. And we can now initialize things for PM and display pdata later to prepare things for using ti-sysc driver. We also need to add some more quirk handling so we can boot both with platform data and dts data. * tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Show module information for suspend if DEBUG is enabled bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4 bus: ti-sysc: Detect omap4 type timers for quirk bus: ti-sysc: Add initial support for external resets bus: ti-sysc: Improve suspend and resume handling bus: ti-sysc: Tag some modules resource providers for noirq suspend bus: ti-sysc: Add handling for clkctrl opt clocks bus: ti-sysc: Make child clock alias handling more generic bus: ti-sysc: Handle simple-bus for nested children ARM: OMAP2+: Make display related init into device_initcall ARM: OMAP2+: Initialize SoC PM later ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts ARM: OMAP2+: Use signed value for sysc register offsets ARM: OMAP2+: Allow using ti-sysc for system timers ARM: OMAP2+: Drop unused pm-noop Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-13genirq/msi: Limit level-triggered MSI to platform devicesMarc Zyngier1-0/+2
Nobody would be insane enough to try and use level triggered MSIs on PCI, but let's make sure it doesn't happen. Also, let's mandate that the irqchip backing the platform MSI domain is providing the IRQCHIP_SUPPORTS_LEVEL_MSI flag. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-3-marc.zyngier@arm.com
2018-05-10HISI LPC: Add ACPI UART supportJohn Garry1-0/+17
On the Huawei D03 development board the system UART is the UART connected on the LPC bus. The profile for the device driver required for this HW is as follows: - platform driver - 16550 - ACPI support - polling mode support - IO space support In principle we should use the PNP driver (8250_dw.c) for 8250-devices with ACPI FW. However since this driver does not support PNP devices, and modifying the PNP core code to support it is not worth the effort, use the generic 8250 isa driver. For this, we setup the pdev platform data for the serial 8250 port. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10HISI LPC: Re-Add ACPI child enumeration supportJohn Garry1-0/+74
Since we no longer use the MFD APIs to enumerate the child devices on the bus, use the platform driver APIs directly. In this patch we iterate of the children devices for the host, and create a platform device directly per child. For the iterating, we match the child ACPI HID against a known list of supported child devices and their respective ACPIs HID, to find the device name and any other supplementary data. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10HISI LPC: Stop using MFD APIsJohn Garry2-65/+8
The MFD APIs should only be used by drivers in drivers/mfd. It is not worth splitting the driver to have separate parts in drivers/bus and drivers/mfd, so just drop MFD API usage. As a solution, we will use the platform device APIs directly to achieve the same as we had when using MFD APIs. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-01bus: ti-sysc: Show module information for suspend if DEBUG is enabledTony Lindgren1-0/+18
Let's show module info if DEBUG is enabled to make it easier to follow what happens on the suspend and resume path. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-01bus: ti-sysc: Tag sdio and wdt with legacy mode for suspendTony Lindgren1-0/+8
Looks like these two device drivers don't yet behave properly for suspend unless configured with the legacy option. Signed-off-by: Tony Lindgren <tony@atomide.com>