summaryrefslogtreecommitdiffstats
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2020-05-22bus: mhi: core: Improve debug logs for loading firmwareBhaumik Bhatt1-3/+18
Add log messages to track boot flow errors and timeouts in SBL or AMSS firmware loading to aid in debug. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Return appropriate error codes for AMSS load failureBhaumik Bhatt1-11/+12
When loading AMSS firmware using BHIe protocol, return -ETIMEDOUT if no response is received within the timeout or return -EIO in case of a protocol returned failure or an MHI error state. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle firmware load using state workerBhaumik Bhatt4-21/+5
Upon power up, driver queues firmware worker thread if the execution environment is PBL. Firmware worker is blocked with a timeout until state worker gets a chance to run and unblock firmware worker. An endpoint power up failure can be seen if state worker gets a chance to run after firmware worker has timed out. Remove this dependency and handle firmware load directly using state worker thread. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Read transfer length from an event properlyHemant Kumar1-2/+7
When MHI Driver receives an EOT event, it reads xfer_len from the event in the last TRE. The value is under control of the MHI device and never validated by Host MHI driver. The value should never be larger than the real size of the buffer but a malicious device can set the value 0xFFFF as maximum. This causes driver to memory overflow (both read or write). Fix this issue by reading minimum of transfer length from event and the buffer length provided. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Add range check for channel id received in event ringHemant Kumar1-11/+29
MHI data completion handler function reads channel id from event ring element. Value is under the control of MHI devices and can be any value between 0 and 255. In order to prevent out of bound access add a bound check against the max channel supported by controller and skip processing of that event ring element. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Cache intmod from mhi event to mhi channelHemant Kumar1-0/+4
Driver is using zero initialized intmod value from mhi channel when configuring TRE for bei field. This prevents interrupt moderation to take effect in case it is supported by an event ring. Fix this by copying intmod value from associated event ring to mhi channel upon registering mhi controller. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Refactor mhi queue APIsHemant Kumar2-63/+47
Move all the common code to generate TRE from mhi_queue_buf, mhi_queue_dma and mhi_queue_skb to mhi_gen_tre. This helps to centralize the TRE generation code which makes any future bug fixing easier to manage in these APIs. Suggested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19bus: ti-sysc: Timers no longer need legacy quirk handlingTony Lindgren1-7/+7
As timers no longer need legacy quirk handling, let's move them to the CONFIG_DEBUG section to make it easier to see which drivers still need more work. Let's also add detection for few more older timer revisions while at it as that makes CONFIG_DEBUG output easier to read with proper names. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-19bus: ti-sysc: Ignore timer12 on secure omap3Tony Lindgren1-0/+11
Some early omap3 boards use timer12 for system timer, but for secure SoCs like on n900 it's not accessible. Likely we will be configuring unavailable devices for other SoCs too based on runtime SoC detection, so let's use a switch to start with. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-15Merge tag 'vexpress-modules-for-soc-v2' of ↵Arnd Bergmann2-70/+286
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc VExpress modularization This series enables building various Versatile Express platform drivers as modules. The primary target is the Fast Model FVP which is supported in Android. As Android is moving towards their GKI, or generic kernel, the hardware support has to be in modules. Currently ARCH_VEXPRESS enables several built-in only drivers. Some of these are needed, but some are only needed for older 32-bit VExpress platforms and can just be disabled. * tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: vexpress: Don't select VEXPRESS_CONFIG bus: vexpress-config: Support building as module vexpress: Move setting master site to vexpress-config bus bus: vexpress-config: simplify config bus probing bus: vexpress-config: Merge vexpress-syscfg into vexpress-config mfd: vexpress-sysreg: Support building as a module mfd: vexpress-sysreg: Use devres API variants mfd: vexpress-sysreg: Drop unused syscon child devices mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO clk: vexpress-osc: Support building as a module clk: vexpress-osc: Use the devres clock API variants clk: versatile: Only enable SP810 on 32-bit by default clk: versatile: Rework kconfig structure amba: Retry adding deferred devices at late_initcall arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS ARM: vexpress: Move vexpress_flags_set() into arch code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-15bus: mhi: core: Fix some error return codeWei Yongjun1-0/+2
Fix to return negative error code from the error handling case instead of 0 in mhi_init_dev_ctxt() and mhi_driver_probe(). Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200509075654.175002-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13bus: vexpress-config: Support building as moduleRob Herring2-7/+5
Enable building vexpress-config driver as a module. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13vexpress: Move setting master site to vexpress-config busRob Herring1-4/+33
There's only a single caller of vexpress_config_set_master() from vexpress-sysreg.c. Let's just make the registers needed available to vexpress-config and move all the code there. The registers needed aren't used anywhere else either. With this, we can get rid of the private API between these 2 drivers. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13bus: vexpress-config: simplify config bus probingRob Herring1-97/+21
The vexpress-config initialization is dependent on the vexpress-syscfg driver probing. As vexpress-config was not a driver, deferred probe could not be used and instead initcall ordering was relied upon. This is fragile and doesn't work for modules. Let's move the config bus init into the vexpress-syscfg probe. This eliminates the initcall ordering requirement and the need to create a struct device and the "vexpress-config" class. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-13bus: vexpress-config: Merge vexpress-syscfg into vexpress-configRob Herring1-9/+274
The only thing that vexpress-syscfg does is provide a regmap to vexpress-config bus child devices. There's little reason to have 2 components for this. The current structure with initcall ordering requirements makes turning these components into modules more difficult. So let's start to simplify things and merge vexpress-syscfg into vexpress-config. There's no functional change in this commit and it's still separate components until subsequent commits. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-11Merge 5.7-rc5 into char-misc-nextGreg Kroah-Hartman4-21/+13
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Fix channel device name conflictJeffrey Hugo1-1/+2
When multiple instances of the same MHI product are present in a system, we can see a splat from mhi_create_devices() - "sysfs: cannot create duplicate filename". This is because the device names assigned to the MHI channel devices are non-unique. They consist of the channel's name, and the channel's pipe id. For identical products, each instance is going to have the same set of channel (both in name and pipe id). To fix this, we prepend the device name of the parent device that the MHI channels belong to. Since different instances of the same product should have unique device names, this makes the MHI channel devices for each product also unique. Additionally, remove the pipe id from the MHI channel device name. This is an internal detail to the MHI product that provides little value, and imposes too much device specific internal details to userspace. It is expected that channel with a specific name (ie "SAHARA") has a specific client, and it does not matter what pipe id that channel is enumerated on. The pipe id is an internal detail between the MHI bus, and the hardware. The client is not expected to make decisions based on the pipe id, and to do so would require the client to have intimate knowledge of the hardware, which is inappropiate as it may violate the layering provided by the MHI bus. The limitation of doing this is that each product may only have one instance of a channel by a unique name. This limitation is appropriate given the usecases of MHI channels. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Offload register accesses to the controllerJeffrey Hugo3-14/+4
When reading or writing MHI registers, the core assumes that the physical link is a memory mapped PCI link. This assumption may not hold for all MHI devices. The controller knows what is the physical link (ie PCI, I2C, SPI, etc), and therefore knows the proper methods to access that link. The controller can also handle link specific error scenarios, such as reading -1 when the PCI link went down. Therefore, it is appropriate that the MHI core requests the controller to make register accesses on behalf of the core, which abstracts the core from link specifics, and end up removing an unnecessary assumption. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Remove link_status() callbackJeffrey Hugo2-7/+4
If the MHI core detects invalid data due to a PCI read, it calls into the controller via link_status() to double check that the link is infact down. All in all, this is pretty pointless, and racy. There are no good reasons for this, and only drawbacks. Its pointless because chances are, the controller is going to do the same thing to determine if the link is down - attempt a PCI access and compare the result. This does not make the link status decision any smarter. Its racy because its possible that the link was down at the time of the MHI core access, but then recovered before the controller access. In this case, the controller will indicate the link is not down, and the MHI core will precede to use a bad value as the MHI core does not attempt to retry the access. Retrying the access in the MHI core is a bad idea because again, it is racy - what if the link is down again? Furthermore, there may be some higher level state associated with the link status, that is now invalid because the link went down. The only reason why the MHI core could see "invalid" data when doing a PCI access, that is actually valid, is if the register actually contained the PCI spec defined sentinel for an invalid access. In this case, it is arguable that the MHI implementation broken, and should be fixed, not worked around. Therefore, remove the link_status() callback before anyone attempts to implement it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Make sure to powerdown if mhi_sync_power_up failsJeffrey Hugo1-1/+5
Powerdown is necessary if mhi_sync_power_up fails due to a timeout, to clean up the resources. Otherwise a BUG could be triggered when attempting to clean up MSIs because the IRQ is still active from a request_irq(). Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28bus: Add driver for Integrator/AP logic modulesLinus Walleij3-1/+138
The logic modules on the Integrator/AP (Application Platform) are logic tiles with (typically) one or a few peripheral devices. They are most commonly used for FPGA prototyping. Using the device tree node for logic tiles, we probe them in order and check if the special system controller register confirm their presence before populating the node for a tile. This supercedes the code in arch/arm/mach-integrator/lm.[c|h] and makes it possible to populate the tiles using the device tree instead of boardfile-based descriptions. Tested with all peripherals including graphics and MMC card working fine with the IM-PD1 example tile from Arm. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()Dan Carpenter1-1/+1
The mhi_alloc_device() function never returns NULL, it returns error pointers. Fixes: da1c4f856924 ("bus: mhi: core: Add support for creating and destroying MHI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200407093133.GM68494@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28bus: mhi: core: Add support for MHI suspend and resumeManivannan Sadhasivam2-1/+145
Add support for MHI suspend and resume states. While at it, the mhi_notify() function needs to be exported as well. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200427075829.9304-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-03Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds2-91/+540
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds10-0/+5008
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-01Merge branch 'linus' of ↵Linus Torvalds1-16/+17
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms Algorithms: - Use formally verified implementation of x86/curve25519 Drivers: - Enhance hwrng support in caam - Use crypto_engine for skcipher/aead/rsa/hash in caam - Add Xilinx AES driver - Add uacce driver - Register zip engine to uacce in hisilicon - Add support for OCTEON TX CPT engine in marvell" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) crypto: af_alg - bool type cosmetics crypto: arm[64]/poly1305 - add artifact to .gitignore files crypto: caam - limit single JD RNG output to maximum of 16 bytes crypto: caam - enable prediction resistance in HRWNG bus: fsl-mc: add api to retrieve mc version crypto: caam - invalidate entropy register during RNG initialization crypto: caam - check if RNG job failed crypto: caam - simplify RNG implementation crypto: caam - drop global context pointer and init_done crypto: caam - use struct hwrng's .init for initialization crypto: caam - allocate RNG instantiation descriptor with GFP_DMA crypto: ccree - remove duplicated include from cc_aead.c crypto: chelsio - remove set but not used variable 'adap' crypto: marvell - enable OcteonTX cpt options for build crypto: marvell - add the Virtual Function driver for CPT crypto: marvell - add support for OCTEON TX CPT engine crypto: marvell - create common Kconfig and Makefile for Marvell crypto: arm/neon - memzero_explicit aes-cbc key crypto: bcm - Use scnprintf() for avoiding potential buffer overflow crypto: atmel-i2c - Fix wakeup fail ...
2020-03-30bus: fsl-mc: add api to retrieve mc versionAndrei Botila1-16/+17
Add a new api that returns Management Complex firmware version and make the required structure public. The api's first user will be the caam driver for setting prediction resistance bits. Signed-off-by: Andrei Botila <andrei.botila@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-26bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()Manivannan Sadhasivam2-0/+25
For some scenarios like controller suspend and resume, mhi_destroy_device() will get called without mhi_unregister_controller(). In that case, the references to the mhi_dev created for the channels will not be dropped but the channels will be destroyed as per the spec. This will cause issue during resume as the channels will not be created due to the fact that mhi_dev is not NULL. Hence, this change decrements the refcount for mhi_dev in mhi_destroy_device() for concerned channels and also sets mhi_dev to NULL in release_device(). Reported-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM captureManivannan Sadhasivam1-1/+2
The bhie field in mhi_cntrl needs to be initialized to proper register base in order to make mhi_rddm_prepare() to work. Otherwise, mhi_rddm_prepare() will cause NULL pointer dereference. Fixes: 6fdfdd27328c ("bus: mhi: core: Add support for downloading RDDM image during panic") Reported-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26bus: mhi: core: Add support for reading MHI info from deviceManivannan Sadhasivam2-2/+27
The MHI register base has several registers used for getting the MHI specific information such as version, family, major, and minor numbers from the device. This information can be used by the controller drivers for usecases such as applying quirks for a specific revision etc... While at it, let's also rearrange the local variables in mhi_register_controller(). Suggested-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Merge tag 'omap-for-v5.7/ti-sysc-fix-signed' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Fix for ti-sysc suspend/resume issue on am335x for v5.7 merge window Just merge in a ti-sysc fix for am335x lcdc suspend/resume issue, and resolve merge conflict. * tag 'omap-for-v5.7/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix quirk flags for lcdc on am335x Link: https://lore.kernel.org/r/pull-1584132028-918607@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.7/ti-sysc-signed' of ↵Arnd Bergmann1-90/+516
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Driver changes for ti-sysc for v5.7 merge window Driver changes for ti-sysc interconnect target module driver mostly to be able to probe display subsystem (DSS) without platform data: - Rename clk_enable/disable quirks to less confusing pre and post reset quirks - Enable module reset to work with modules with no sysconfig register - Also consider non-existing module register when matching quirks - Don't warn with nested ti-sysc devices - Implement basic SoC revision handling - Detect DSS related devices - Implement DSS reset quirks Note that there is also a DSS driver specific probe fix to allow probing devices configured for interconnect target module data that was agreed to be merged along with the ti-sysc driver changes. And then there also changes to handle RTC, EDMA and PRUSS: - Add module unlock quirk for RTC - Detect EDMA modules - Add support for handling PRUSS * tag 'omap-for-v5.7/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add support for PRUSS SYSC type dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type bus: ti-sysc: Detect EDMA and set quirk flags for tptc bus: ti-sysc: Fix wrong offset for display subsystem reset quirk bus: ti-sysc: Implement display subsystem reset quirk bus: ti-sysc: Detect display subsystem related devices bus: ti-sysc: Handle module unlock quirk needed for some RTC bus: ti-sysc: Implement SoC revision handling bus: ti-sysc: Don't warn about legacy property for nested ti-sysc devices bus: ti-sysc: Consider non-existing registers too when matching quirks bus: ti-sysc: Improve reset to work with modules with no sysconfig bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks bus: ti-sysc: Fix 1-wire reset quirk drm/omap: Prepare DSS for probing without legacy platform data Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'hisi-drivers-for-5.7' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann1-2/+25
into arm/drivers ARM64: hisi: SoC driver updates for 5.7 - Fix up the device resources for the broken firmware to avoid use-after-free warnings from KASAN in the host removal path * tag 'hisi-drivers-for-5.7' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Fixup IO ports addresses to avoid use-after-free in host removal Link: https://lore.kernel.org/r/5E61F700.5060301@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-24bus: mhi: core: Pass module owner during client driver registrationManivannan Sadhasivam1-2/+3
The module owner field can be used to prevent the removal of kernel modules when there are any device files associated with it opened in userspace. Hence, modify the API to pass module owner field. For convenience, module_mhi_driver() macro is used which takes care of passing the module owner through THIS_MODULE of the module of the driver and also avoiding the use of specifying the default MHI client driver register/unregister routines. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24bus/mhi: fix printk format for size_tRandy Dunlap1-1/+1
Fix printk format warning by using %z for size_t modifier: ../drivers/bus/mhi/core/boot.c: In function `mhi_rddm_prepare': ../drivers/bus/mhi/core/boot.c:55:15: warning: format `%lx' expects argument of type `long unsigned int', but argument 5 has type `size_t {aka unsigned int}' [-Wformat=] dev_dbg(dev, "Address: %p and len: 0x%lx sequence: %u ", Link: http://lkml.kernel.org/r/c4852a82-cdb9-6318-70a4-96ccb4ba5af2@infradead.org Fixes: 6fdfdd27328ce ("bus: mhi: core: Add support for downloading RDDM image during panic") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20200324022505.UiPPJZVXX%akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add uevent support for module autoloadingManivannan Sadhasivam1-0/+9
Add uevent support to MHI bus so that the client drivers can be autoloaded by udev when the MHI devices gets created. The client drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table struct so that the alias can be exported. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for data transferManivannan Sadhasivam4-8/+899
Add support for transferring data between external modem and host processor using MHI protocol. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/988 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted the data transfer patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for processing events from client deviceManivannan Sadhasivam3-0/+496
This commit adds support for processing the MHI data and control events from the client device. The client device can report various events such as EE events, state change events by interrupting the host through IRQ and adding events to the event rings allocated by the host during initialization. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/988 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted the data transfer patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for downloading RDDM image during panicManivannan Sadhasivam4-0/+225
MHI protocol supports downloading RDDM (RAM Dump) image from the device through BHIE. This is useful to debugging as the RDDM image can capture the firmware state. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted the data transfer patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for downloading firmware over BHIeManivannan Sadhasivam3-0/+270
MHI supports downloading the device firmware over BHI/BHIe (Boot Host Interface) protocol. Hence, this commit adds necessary helpers, which will be called during device power up stage. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted the data transfer patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for basic PM operationsManivannan Sadhasivam6-1/+750
This commit adds support for basic MHI PM operations such as mhi_async_power_up, mhi_sync_power_up, and mhi_power_down. These routines places the MHI bus into respective power domain states and calls the state_transition APIs when necessary. The MHI controller driver is expected to call these PM routines for MHI powerup and powerdown. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted the pm patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for PM state transitionsManivannan Sadhasivam5-1/+928
This commit adds support for transitioning the MHI states as a part of the power management operations. Helpers functions are provided for the state transitions, which will be consumed by the actual power management routines. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [jhugo: removed dma_zalloc_coherent() and fixed several bugs] Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> [mani: splitted the pm patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for ringing channel/event ring doorbellsManivannan Sadhasivam3-0/+541
This commit adds support for ringing channel and event ring doorbells by MHI host. The MHI host can use the channel and event ring doorbells for notifying the client device about processing transfer and event rings which it has queued using MMIO registers. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted from pm patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for creating and destroying MHI devicesManivannan Sadhasivam2-1/+124
This commit adds support for creating and destroying MHI devices. The MHI devices binds to the MHI channels and are used to transfer data between MHI host and client device. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/989 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted from pm patch and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for registering MHI client driversManivannan Sadhasivam1-0/+149
This commit adds support for registering MHI client drivers with the MHI stack. MHI client drivers binds to one or more MHI devices inorder to sends and receive the upper-layer protocol packets like IP packets, modem control messages, and diagnostics messages over MHI bus. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/987 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: splitted and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Link: https://lore.kernel.org/r/20200220095854.4804-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19bus: mhi: core: Add support for registering MHI controllersManivannan Sadhasivam7-0/+576
This commit adds support for registering MHI controller drivers with the MHI stack. MHI controller drivers manages the interaction with the MHI client devices such as the external modems and WiFi chipsets. They are also the MHI bus master in charge of managing the physical link between the host and client device. This is based on the patch submitted by Sujeev Dias: https://lkml.org/lkml/2018/7/9/987 Signed-off-by: Sujeev Dias <sdias@codeaurora.org> Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [jhugo: added static config for controllers and fixed several bugs] Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> [mani: removed DT dependency, splitted and cleaned up for upstream] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200220095854.4804-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10Merge branch 'fix-lcdc-quirk' into omap-for-v5.7/ti-syscTony Lindgren1-1/+2
2020-03-10Merge branch 'fix-lcdc-quirk' into fixesTony Lindgren1-1/+2
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 12:44:28 +0000