summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2022-03-18Bluetooth: ath3k: remove superfluous header filesMianhan Liu1-1/+0
ath3k.c hasn't use any macro or function declared in linux/device.h. Thus, these files can be removed from ath3k.c safely without affecting the compilation of the ./drivers/bluetooth module Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: bcm203x: remove superfluous header filesMianhan Liu1-1/+0
bcm203x.c hasn't use any macro or function declared in linux/atomic.h. Thus, these files can be removed from bcm203x.c safely without affecting the compilation of the ./drivers/bluetooth module Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: hci_bcm: Add the Asus TF103C to the bcm_broken_irq_dmi_tableHans de Goede1-8/+36
The DSDT for the Asus TF103C specifies a IOAPIC IRQ for the HCI -> host IRQ but this is not correct. Unlike the previous entries in the table, this time the correct GPIO to use instead is known; and the TF103C is battery powered making runtime-pm support more important. Extend the bcm_broken_irq_dmi_table mechanism to allow specifying the right GPIO instead of just always disabling runtime-pm and add an entry to it for the Asus TF103C. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add WBS supportYake Yang1-0/+3
It is time to add wide band speech (WBS) support. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .btmtk_get_codec_config_dataYake Yang1-0/+50
add .btmtk_get_codec_config_data to get codec configuration data. In HFP offload usecase, controllers need to be set codec details before opening SCO. This callback function is used to fetch vendor specific codec config data. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .get_data_path_idYake Yang1-1/+14
Add .get_data_path_id to fetch data_path_id for MT7921 to support HFP offload use case. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATESYake Yang1-0/+3
The patch set HCI_QUIRK_VALID_LE_STATES to be consistent with the btusb for MT7921 and is required for the likes of experimental LE simultaneous roles. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interruptYake Yang1-2/+2
Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer. Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: fix error handling in mtk_hci_wmt_sync()Dan Carpenter1-5/+7
This code has an uninitialized variable warning: drivers/bluetooth/btmtkuart.c:184 mtk_hci_wmt_sync() error: uninitialized symbol 'wc'. But it also has error paths which have memory leaks. Fixes: 8f550f55b155 ("Bluetooth: btmtkuart: rely on BT_MTK module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btrtl: Add support for RTL8852BMax Chou1-0/+13
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: hci_uart: add missing NULL check in h5_enqueuePavel Skripkin1-3/+5
Syzbot hit general protection fault in __pm_runtime_resume(). The problem was in missing NULL check. hu->serdev can be NULL and we should not blindly pass &serdev->dev somewhere, since it will cause GPF. Reported-by: syzbot+b9bd12fbed3485a3e51f@syzkaller.appspotmail.com Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllersIsmael Ferreras Morezuelas1-2/+4
Another subset of the more recent batch of Chinese clones aren't specs-compliant and seem to lock up whenever they receive a HCI_OP_SET_EVENT_FLT with flt_type set to zero/HCI_FLT_CLEAR_ALL, which on Linux (until the recent HCI state-machine refactor) happened right at BR/EDR setup. As there are other less-straightforward ways of reaching those operations, this patch is still relevant. So, while all the previous efforts to wrangle the herd of fake CSRs seem to be paying off (and these also get detected as such) we still need to take care of this quirk; testers seem to agree that these dongles tend to work well enough afterwards. From some cursory USB packet capture on Windows it seems like that driver doesn't appear to use this clear-all functionality at all. This patch was tested on some really popular AliExpress-style dongles, in my case marked as "V5.0". Chip markings: UG8413, the backside of the PCB says "USB Dangel" (sic). Here is the `hciconfig -a` output; for completeness: hci0: Type: Primary Bus: USB BD Address: 00:1A:7D:DA:7X:XX ACL MTU: 679:8 SCO MTU: 48:16 UP RUNNING PSCAN ISCAN Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: PERIPHERAL ACCEPT Name: 'CSR8510 A10.' Class: 0x7c0104 Service Classes: Rendering, Capturing, Object Transfer, Audio, Telephony Device Class: Computer, Desktop workstation HCI Version: 4.0 (0x6) Revision: 0x3120 LMP Version: 4.0 (0x6) Subversion: 0x22bb Manufacturer: Cambridge Silicon Radio (10) As well as the `lsusb -vv -d 0a12:0001`: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize0 64 idVendor 0x0a12 Cambridge Silicon Radio, Ltd idProduct 0x0001 Bluetooth Dongle (HCI mode) bcdDevice 88.91 iManufacturer 0 iProduct 2 BT DONGLE10 iSerial 0 bNumConfigurations 1 Also, changed the benign dmesg print that shows up whenever the generic force-suspend fails from bt_dev_err to bt_dev_warn; it's okay and done on a best-effort basis, not a problem if that does not work. Also, swapped the HCI subver and LMP subver numbers for the Barrot in the comment, which I copied wrong the last time around. Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor") Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers") Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134") Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers") Fixes: f4292e2faf522 ("Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic") Link: https://bugzilla.kernel.org/show_bug.cgi?id=60824 Link: https://gist.github.com/nevack/6b36b82d715dc025163d9e9124840a07 Cc: stable@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Gonzalo Tornaría <tornaria@cmat.edu.uy> Tested-by: Mateus Lemos <lemonsmateus@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: fix the conflict between mtk and msft vendor eventSean Wang1-8/+1
There is a conflict between MediaTek wmt event and msft vendor extension logic in the core layer since 145373cb1b1f ("Bluetooth: Add framework for Microsoft vendor extension") was introduced because we changed the type of mediatek wmt event to the type of msft vendor event in the driver. But the purpose we reported mediatek event to the core layer is for the diagnostic purpose with that we are able to see the full packet trace via monitoring socket with btmon. Thus, it is harmless we keep the original type of mediatek vendor event here to avoid breaking the msft extension function especially they can be supported by Mediatek future devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: add .set_bdaddr supportSean Wang1-0/+1
add .set_bdaddr support Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: rely on BT_MTK moduleSean Wang4-158/+29
Rely on btmtk module to reduce duplicated code Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btusb: Add missing Chicony device for Realtek RTL8723BETakashi Iwai1-0/+1
Chicony Electronics BT device with 04f2:b49f seems to be a missing entry for Realtek RTL8723BE. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=b49f Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1196779 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: Add another Realtek 8761BUHelmut Grohne1-0/+2
This device is sometimes wrapped with a label "EDUP". T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2550 ProdID=8761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Helmut Grohne <helmut@subdivi.de> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351 Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1Luca Weiss1-0/+2
Add the compatible for BCM43430A0 bluetooth used in lg-lenok and BCM43430A1 used in asus-sparrow. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.Yake Yang1-2/+2
Do not kfree the skb when the skb failed to send with __hci_cmd_sync 2435.241210] Call trace: [ 2435.241224] kfree_skb+0x20/0x140 [ 2435.241240] btmtksdio_sdio_wakeup+0x8c/0xcc [ 2435.241360] hci_suspend_notifier+0x108/0x184 [ 2435.241377] notifier_call_chain_robust+0x58/0xd8 [ 2435.241390] blocking_notifier_call_chain_robust+0x54/0x84 [ 2435.241402] pm_notifier_call_chain_robust+0x2c/0x4c [ 2435.241414] suspend_prepare+0x40/0x238 [ 2435.241425] enter_state+0xec/0x3a8 [ 2435.241436] pm_suspend+0x60/0xcc [ 2435.241446] state_store+0xb8/0x114 [ 2435.241460] kobj_attr_store+0x18/0x2c [ 2435.241473] sysfs_kf_write+0x44/0x58 [ 2435.241486] kernfs_fop_write_iter+0xf4/0x190 [ 2435.241500] vfs_write+0x2b0/0x2e4 [ 2435.241511] ksys_write+0x80/0xec [ 2435.241523] __arm64_sys_write+0x24/0x30 [ 2435.241538] el0_svc_common+0xf0/0x1d8 [ 2435.241550] do_el0_svc_compat+0x28/0x54 [ 2435.241564] el0_svc_compat+0x10/0x1c [ 2435.241574] el0_sync_compat_handler+0xa8/0xcc [ 2435.241586] el0_sync_compat+0x188/0x1c0 [ 2435.241606] Code: a9014ff4 910003fd b40002c0 aa0003f3 (b84d4c08) [ 2435.241619] ---[ end trace d496539b850baf14 ]--- Fixes: ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921Yake Yang1-0/+3
Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3567 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: Make use of of BIT macro to declare flagsLuiz Augusto von Dentz1-27/+27
This makes use of BIT macro when declaring BTUSB flags which makes it understand how many bits are in use and many are left. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: mediatek: fix the conflict between mtk and msft vendor eventSean Wang3-16/+2
There is a conflict between MediaTek wmt event and msft vendor extension logic in the core layer since 145373cb1b1f ("Bluetooth: Add framework for Microsoft vendor extension") was introduced because we changed the type of mediatek wmt event to the type of msft vendor event in the driver. But the purpose we reported mediatek event to the core layer is for the diagnostic purpose with that we are able to see the full packet trace via monitoring socket with btmon. Thus, it is harmless we keep the original type of mediatek vendor event here to avoid breaking the msft extension function especially they can be supported by Mediatek chipset like MT7921 , MT7922 devices and future devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: mt7921s: support bluetooth reset mechanismChih-Ying Chiang2-1/+118
Implement .cmd_timeout to reset the MT7921s device via a dedicated GPIO pin when the firmware hang or the command has no response. Co-developed-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chih-Ying Chiang <chih-yin.chiang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: Improve stability for QCA devicesZijun Hu1-0/+8
WCN6855 2.1 will reset to apply firmware downloaded, so wait a moment for reset done then go ahead to improve stability. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN)Piotr Dymacz1-0/+5
The LG LGSBWAC02 (FCC ID: BEJLGSBWAC02) is a combo Wi-Fi/BT module which can be found in several different LG TV models. This module is based on already supported MediaTek MT7663U series. Device from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=310c Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=mt7663u E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) deviceKiran K1-0/+1
$ lsusb Bus 003 Device 003: ID 8087:0035 Intel Corp. $ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0035 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-28Merge tag 'for-net-next-2022-01-28' of ↵Jakub Kicinski11-66/+293
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for RTL8822C hci_ver 0x08 - Add support for RTL8852AE part 0bda:2852 - Fix WBS setting for Intel legacy ROM products - Enable SCO over I2S ib mt7921s - Increment management interface revision * tag 'for-net-next-2022-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (30 commits) Bluetooth: Increment management interface revision Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_open Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08 Bluetooth: hci_event: Fix HCI_EV_VENDOR max_len Bluetooth: hci_core: Rate limit the logging of invalid SCO handle Bluetooth: hci_event: Ignore multiple conn complete events Bluetooth: msft: fix null pointer deref on msft_monitor_device_evt Bluetooth: btmtksdio: mask out interrupt status Bluetooth: btmtksdio: run sleep mode by default Bluetooth: btmtksdio: lower log level in btmtksdio_runtime_[resume|suspend]() Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl() Bluetooth: mt7921s: fix bus hang with wrong privilege Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]() Bluetooth: mt7921s: fix firmware coredump retrieve Bluetooth: hci_serdev: call init_rwsem() before p->open() Bluetooth: Remove kernel-doc style comment block Bluetooth: btusb: Whitespace fixes for btusb_setup_csr() Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products ... ==================== Link: https://lore.kernel.org/r/20220128205915.3995760-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-26Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_openVyacheslav Bocharov1-0/+5
Add power reset for bluetooth via enable-gpios in h5_btrtl_open function. While testing the RTL8822CS SDIO WiFi/BT adapter, it was found that in some cases the kernel could not initialize BT firmware. However, manually resetting the adapter via gpio (off/on sequence) allows it to start correctly. Apparently, when the system starts, the adapter is in an undefined state (including unknown gpio state after starting uboot). A forced reset helps to initialize the adapter in most cases. It has been found experimentally that 100 ms is sufficient for a reset. Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-26Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08Vyacheslav Bocharov1-0/+8
Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android set-top box and JetHome JetHub H1. Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: mask out interrupt statusSean Wang1-0/+2
Currently, there is a loop in btmtksdio_txrx_work() which iteratively executes until the variable int_status is zero. But the variable int_status should be masked out with the actual interrupt sources (MTK_REG_CHISR bit 0-15) before we check the loop condition. Otherwise, RX_PKT_LEN (MTK_REG_CHISR bit 16-31) which is read-only and unclearable would cause the loop to get stuck on some chipsets like MT7663s. Fixes: 26270bc189ea ("Bluetooth: btmtksdio: move interrupt service to work") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: run sleep mode by defaultSean Wang1-2/+2
Apply sleep mode by default and a smaller idle time to reduce power consumption further. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: lower log level in btmtksdio_runtime_[resume|suspend]()Sean Wang1-2/+2
Lower its log level from INFO to DEBUG prior to we enable runtime pm for mt7921s with the smaller idle time as default. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl()Mark Chen1-0/+38
According to the firmware behavior (even the oldest one in linux-firmware) If the firmware is downloaded, MT7921S must rely on the additional mailbox mechanism that resides in firmware to check if the device is the right state for btmtksdio_mcu_[drv|fw]_pmctrl(). Otherwise, we still apply the old way for that. That is a necessary patch before we enable runtime pm for mt7921s as default. Fixes: c603bf1f94d0 ("Bluetooth: btmtksdio: add MT7921s Bluetooth support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix bus hang with wrong privilegeMark Chen1-0/+8
According to chip hw flow, mt7921s need to re-acquire privilege again before normal running. Otherwise, the bus may be stuck in an abnormal status. Fixes: c603bf1f94d0 ("Bluetooth: btmtksdio: add MT7921s Bluetooth support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]()Mark Chen1-41/+53
Refactor btmtksdio_runtime_[suspend|resume]() to create the common funcitons btmtksdio_[fw|drv]_pmctrl() shared with btmtksdio_[open|close]() to avoid the redundant code as well. This is also a prerequisite patch for the incoming patches. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix firmware coredump retrieveMark Chen1-0/+10
According to the MCU firmware behavior, as the driver is aware of the notification of the interrupt source FW_MAILBOX_INT that shows the MCU completed delivered a core dump piece to the host, the driver must acknowledge the MCU with the register PH2DSM0R bit PH2DSM0R_DRIVER_OWN to notify the MCU to handle the next core dump piece. Fixes: db57b625912a ("Bluetooth: btmtksdio: add support of processing firmware coredump and log") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: hci_serdev: call init_rwsem() before p->open()Pavel Skripkin1-1/+2
kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem. The problem was in wrong place for percpu_init_rwsem() call. hci_uart_proto::open() may register a timer whose callback may call hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device() thread won't be fast enough to call percpu_init_rwsem(). Fix it my moving percpu_init_rwsem() call before p->open(). INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9 ... Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:951 [inline] register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906 lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline] hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops") Reported-by: Yiru Xu <xyru1999@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: Remove kernel-doc style comment blockTedd Ho-Jeong An3-3/+3
This patch changes the kernel-doc style comment block to common comment block. These files don't support kernel-doc style so no need to use the kernel-doc style. Also, they cause the warning when W=1 option is used as below. drivers/bluetooth/hci_ll.c:518: warning: Function parameter or member 'lldev' not described in 'download_firmware' drivers/bluetooth/btmrvl_debugfs.c:29: warning: cannot understand function prototype: 'struct btmrvl_debugfs_data ' drivers/bluetooth/btmrvl_sdio.c:36: warning: expecting prototype for Marvell BT-over-SDIO driver(). Prototype was for VERSION() instead Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btusb: Whitespace fixes for btusb_setup_csr()Ismael Ferreras Morezuelas1-3/+3
Properly align the list items of the quirk for readability. No functional changes intended. Trivial stuff. Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers") Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AELarry Finger1-0/+2
This Realtek device has both wifi and BT components. The latter reports a USB ID of 0bda:2852, which is not in the table. BT device description in /sys/kernel/debug/usb/devices contains the following entries: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=2852 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms The missing USB_ID was reported by user trius65 at https://github.com/lwfinger/rtw89/issues/122 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btintel: Fix WBS setting for Intel legacy ROM productsTedd Ho-Jeong An3-3/+15
This patch adds the flag to identify the Intel legacy ROM products that don't support WBS like WP and StP. Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin1-1/+1
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-12Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-10Bluetooth: btmtksdio: clean up inconsistent error message in ↵Sean Wang1-1/+1
btmtksdio_mtk_reg_read Have "..reg (%d)" to be consistent with the other similar error messages. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: btmtksdio: move struct reg_read_cmd to common fileSean Wang2-6/+8
move struct reg_read_cmd to btmtk.h to allow other mtk drivers refer to. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: mt7921s: Enable SCO over I2SMark Chen2-0/+88
The driver has to issue the specific command to enable Bluetooth SCO over the I2S/PCM interface on mt7921s, that is supported since the firmware with version 20211222191101 was added, and the patch would not cause any harm even when the old firmware is applied. The SCO profile with the patch was tested by setting up a VOIP application, connected to HFP device, checked telephony function can work normally. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: mt7921s: Support wake on bluetoothMark Chen2-1/+40
Enable wake on bluetooth on mt7921s that can be supported since the firmware with version 20211129211059 was added, and the patch would not cause any harm even when the old firmware is applied. The patch was tested by setting up an HID or HOGP profile to connect a Bluetooth keyboard and mouse, then putting the system to suspend, then trying to wake up the system by moving the Bluetooth keyboard or mouse, and then checking if the system can wake up and be brought back to the normal state. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: btmtksdio: rename btsdio_mtk_reg_readSean Wang1-3/+3
Using "btmtksdio" as the prefix instead of "btsdio" Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-07Bluetooth: btqca: sequential validationSai Teja Aluvala2-0/+49
Added Sequential validation support & patch command config Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 20:05:09 +0000