summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/hci_ldisc.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-10Bluetooth: hciuart: Add support QCA chipset for UARTBen Young Tae Kim1-0/+6
QCA61x4 chips have supported sleep feature using In-Band-Sleep commands to enable sleep feature based on H4 protocol. After sending patch/nvm configuration is done, IBS mode will be up and running Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-27Bluetooth: hci_ldisc: Cleaned up coding style warningsPrasanna Karthik1-1/+1
Fix for Cleanpatch warning: Space prohibited between function name and open parenthesis '(' Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-23Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devicesLoic Poulain1-0/+6
The Intel Lightning Peak devices do not come with Bluetooth firmware loaded and thus require a full download of the operational Bluetooth firmware when the device is attached via the Bluetooth line discipline. Lightning Peak devices start with a bootloader mode that only accepts a very limited set of HCI commands. The supported commands are enough to identify the hardware and select the right firmware to load. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-18Bluetooth: hci_uart: Fix speed selectionFrederic Danis1-6/+6
hu->proto->*speed will always be used for all device where it is set. But hu->*speed should be used if exist, so the test should be swapped. The equivalent change is needed in bcm_setup() of hci_bcm.c. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: hci_uart: Add new line discipline enhancementsIlya Faenson1-6/+102
Added the ability to flow control the UART, improved the UART baud rate setting, transferred the speeds into line discipline from the protocol and introduced the tty init function. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: hci_uart: Support operational speed during setupFrederic Danis1-0/+26
Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Move request/release_firmware()Frederic Danis1-0/+1
Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-07Bluetooth: hci_uart: Use generic Intel support for address settingMarcel Holtmann1-1/+3
The Bluetooth address setting for Intel devices is provided by a generic module now. Start using that module instead of relying it being included in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Add protocol support for Broadcom UART devicesMarcel Holtmann1-0/+6
This adds the protocol support for Broadcom based UART devices to enable firmware and patchram download procedure. It is a pretty straight forward H:4 driver with the exception of actually having its own setup and address configuration callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Use generic functionality from Broadcom moduleMarcel Holtmann1-1/+3
The new Broadcom Bluetooth support module provides generic functionality for changing and checking the Bluetooth device address. Use these new features instead of keeping a duplicate in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Update version number driverMarcel Holtmann1-1/+1
This version number is more cosmetic and for debugging purposes, but since there has been a few changes lately, increase it now. Two left-over and not used version constants that were never exposed anywhere are removed since they have no actual value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Remove the manual protocol init messageMarcel Holtmann1-0/+2
The init function for each HCI UART protocol prints the same on success and failure. This information is so generic, remove it and let the main HCI UART handling print it instead. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Make struct hci_uart_proto always constMarcel Holtmann1-5/+5
The usage of struct hci_uart_proto should always be const. Change the function headers and individual protocol drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Use const data pointer for received dataMarcel Holtmann1-1/+1
The TTY layer provides its data pointers as const, but the HCI UART callbacks expect them as general data pointers. This is of course wrong and instead of casting them, just fix the individual drivers to actually take a const data pointer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Fix indentation issues for multi-line functionsMarcel Holtmann1-6/+7
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Remove unneeded cast of tty->disc_dataMarcel Holtmann1-4/+4
Casting the tty->disc_data to (void *) is not needed at all. So just remove this cast and assign the object without a cast. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Add support Broadcom address configurationMarcel Holtmann1-0/+5
When using vendor detection, this adds support for the Broadcom specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Add support Intel address configurationMarcel Holtmann1-0/+5
When using vendor detection, this adds support for the Intel specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-07Bluetooth: hci_uart: Add support for vendor detection flagMarcel Holtmann1-1/+28
This adds a new HCI_UART_VND_DETECT flag to allow automatic vendor detection. This allows to enable known vendor commands (for example for setting the public device address) when using a standard H:4 UART protocol or when running in virtual machines. When this new flag is configured and no vendor specific setup routine is provided, then the local version information are read and the provided manufacturer information can be evaluated to configure extra vendor callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-02Bluetooth: Remove unneeded extra ( ) in valid flags checkMarcel Holtmann1-1/+1
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-25Bluetooth: hci_uart: Add setup callbackLoic Poulain1-0/+11
Some Bluetooth controllers require initialization before being used (vendor config, firmware download). Add possibility for a HCI UART proto to implement this early init via the setup callback. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-12Bluetooth: Fix HCIUARTGETDEVICE ioctl when UART is not registeredMarcel Holtmann1-1/+1
The protocol for the UART might be configured, but that does not mean the HCI device is registered. Return an error in that case and only return the index number when HCI_UART_REGISTERED is set. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11Bluetooth: Add support for external configuration with UART driverMarcel Holtmann1-1/+5
The quirk for enabling external configuration with UART needs to be provided via the HCI UART flags. Add a new flag for it and declare it as valid. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-11Bluetooth: Check for valid HCI UART driver flagsMarcel Holtmann1-1/+18
Providing unknown or invalid flags to the HCI UART driver should result in an error. So check which flags are valid and otherwise return an error. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-04-24bluetooth: hci_ldisc: fix deadlock conditionFelipe Balbi1-5/+19
LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Andreas Bießmann <andreas@biessmann.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-05Bluetooth: Remove assignments in if-statementsValentin Ilie1-3/+6
Remove assignment in if-statements to be consistent with the coding style. Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in hci_uart_send_frame()Marcel Holtmann1-8/+1
The hdev parameter of hci_uart_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Add hdev parameter to hdev->send driver callbackMarcel Holtmann1-2/+1
Instead of masking hdev inside the skb->dev parameter, hand it directly to the driver as a parameter to hdev->send. This makes the driver interface more clear and simpler. This patch fixes all drivers to accept and handle the new parameter of hdev->send callback. Special care has been taken for bpa10x and btusb drivers that require having skb->dev set to hdev for the URB transmit complete handlers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-04-04Bluetooth: Remove trivial white spaceChan-yeol Park1-5/+5
This patch removes redundant whitespace from the HCI ldisc driver. Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-04-04Bluetooth: Fix possible NULL dereference in hci_uart_tty_receiveChan-yeol Park1-1/+4
This patch adds a NULL check for the HCI UART ldisc driver because some of HCI UART drivers allow hci_uart_tty_receive function to be called even though the HCI device hasn't been registered yet. Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-10-22TTY: hci_ldisc, remove invalid check in openJiri Slaby1-6/+1
hci_ldisc's open checks if tty_struct->disc_data is set. And if so it returns with an error. But nothing ensures disc_data to be NULL. And since ld->ops->open shall be called only once, we do not need the check at all. So remove it. Note that this is not an issue now, but n_tty will start using the disc_data pointer and this invalid 'if' would trigger then rendering TTYs over BT unusable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18Bluetooth: hci_ldisc.c: removes unnecessary semicolonPeter Senna Tschudin1-1/+1
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17Bluetooth: Add delayed init sequence support for UART controllersJohan Hedberg1-1/+38
This patch makes it possible to have UART drivers perform an internal initialization before calling hci_register_dev. This allows moving a lot of init code from user space (hciattach) to the kernel side, thereby creating a more controlled/robust initialization process. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17Bluetooth: Simplify hci_uart_tty_close logicJohan Hedberg1-12/+13
This patch cleans up and reduces indentation in the hci_uart_tty_close function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17Bluetooth: Initial skeleton for Three-wire UART (H5) supportJohan Hedberg1-0/+6
This patch adds the initial skeleton for Three-wire UART (H5) support and hooks it up to the HCI UART framework. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSESzymon Janc1-1/+1
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to reset device on close instead of init, not to not reset at all. Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-09Bluetooth: Remove redundant hdev->parent fieldDavid Herrmann1-1/+1
We initialize the "struct device" in hci_alloc_dev() for a long time now so we can access hdev->dev.parent directly. Hence, we can drop the temporary field hdev->parent which is used in no other place than hci_add_sysfs(). SET_HCIDEV_DEV() is never called after registering a device by the drivers so we do not overwrite internal device-state. Furthermore, hdev->dev is initialized to 0 by kzalloc() inside hci_alloc_dev() so the default behavior with dev.parent = NULL is kept. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-28Bluetooth: hci_ldisc: fix NULL-pointer dereference on tty_closeJohan Hovold1-1/+1
Do not close protocol driver until device has been unregistered. This fixes a race between tty_close and hci_dev_open which can result in a NULL-pointer dereference. The line discipline closes the protocol driver while we may still have hci_dev_open sleeping on the req_lock mutex resulting in a NULL-pointer dereference when lock is acquired and hci_init_req called. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close detaches protocol driver and cancels init req 5. hci_dev_open (1) releases req lock 6. hci_dev_open (3) grabs req lock, calls hci_init_req, which triggers oops when request is prepared in hci_uart_send_frame [ 137.201263] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 137.209838] pgd = c0004000 [ 137.212677] [00000028] *pgd=00000000 [ 137.216430] Internal error: Oops: 17 [#1] [ 137.220642] Modules linked in: [ 137.223846] CPU: 0 Tainted: G W (3.3.0-rc6-dirty #406) [ 137.230529] PC is at __lock_acquire+0x5c/0x1ab0 [ 137.235290] LR is at lock_acquire+0x9c/0x128 [ 137.239776] pc : [<c0071490>] lr : [<c00733f8>] psr: 20000093 [ 137.239776] sp : cf869dd8 ip : c0529554 fp : c051c730 [ 137.251800] r10: 00000000 r9 : cf8673c0 r8 : 00000080 [ 137.257293] r7 : 00000028 r6 : 00000002 r5 : 00000000 r4 : c053fd70 [ 137.264129] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 137.270965] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 137.278717] Control: 10c5387d Table: 8f0f4019 DAC: 00000015 [ 137.284729] Process kworker/u:1 (pid: 7, stack limit = 0xcf8682e8) [ 137.291229] Stack: (0xcf869dd8 to 0xcf86a000) [ 137.295776] 9dc0: c0529554 00000000 [ 137.304351] 9de0: cf8673c0 cf868000 d03ea1ef cf868000 000001ef 00000470 00000000 00000002 [ 137.312927] 9e00: cf8673c0 00000001 c051c730 c00716ec 0000000c 00000440 c0529554 00000001 [ 137.321533] 9e20: c051c730 cf868000 d03ea1f3 00000000 c053b978 00000000 00000028 cf868000 [ 137.330078] 9e40: 00000000 00000000 00000002 00000000 00000000 c00733f8 00000002 00000080 [ 137.338684] 9e60: 00000000 c02a1d50 00000000 00000001 60000013 c0969a1c 60000093 c053b96c [ 137.347259] 9e80: 00000002 00000018 20000013 c02a1d50 cf0ac000 00000000 00000002 cf868000 [ 137.355834] 9ea0: 00000089 c0374130 00000002 00000000 c02a1d50 cf0ac000 0000000c cf0fc540 [ 137.364410] 9ec0: 00000018 c02a1d50 cf0fc540 00000000 cf0fc540 c0282238 c028220c cf178d80 [ 137.372985] 9ee0: 127525d8 c02821cc 9a1fa451 c032727c 9a1fa451 127525d8 cf0fc540 cf0ac4ec [ 137.381561] 9f00: cf0ac000 cf0fc540 cf0ac584 c03285f4 c0328580 cf0ac4ec cf85c740 c05510cc [ 137.390136] 9f20: ce825400 c004c914 00000002 00000000 c004c884 ce8254f5 cf869f48 00000000 [ 137.398712] 9f40: c0328580 ce825415 c0a7f914 c061af64 00000000 c048cf3c cf8673c0 cf85c740 [ 137.407287] 9f60: c05510cc c051a66c c05510ec c05510c4 cf85c750 cf868000 00000089 c004d6ac [ 137.415863] 9f80: 00000000 c0073d14 00000001 cf853ed8 cf85c740 c004d558 00000013 00000000 [ 137.424438] 9fa0: 00000000 00000000 00000000 c00516b0 00000000 00000000 cf85c740 00000000 [ 137.433013] 9fc0: 00000001 dead4ead ffffffff ffffffff c0551674 00000000 00000000 c0450aa4 [ 137.441589] 9fe0: cf869fe0 cf869fe0 cf853ed8 c005162c c0013b30 c0013b30 00ffff00 00ffff00 [ 137.450164] [<c0071490>] (__lock_acquire+0x5c/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128) [ 137.459503] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58) [ 137.469360] [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c02a1d50>] (skb_queue_tail+0x18/0x48) [ 137.479339] [<c02a1d50>] (skb_queue_tail+0x18/0x48) from [<c0282238>] (h4_enqueue+0x2c/0x34) [ 137.488189] [<c0282238>] (h4_enqueue+0x2c/0x34) from [<c02821cc>] (hci_uart_send_frame+0x34/0x68) [ 137.497497] [<c02821cc>] (hci_uart_send_frame+0x34/0x68) from [<c032727c>] (hci_send_frame+0x50/0x88) [ 137.507171] [<c032727c>] (hci_send_frame+0x50/0x88) from [<c03285f4>] (hci_cmd_work+0x74/0xd4) [ 137.516204] [<c03285f4>] (hci_cmd_work+0x74/0xd4) from [<c004c914>] (process_one_work+0x1a0/0x4ec) [ 137.525604] [<c004c914>] (process_one_work+0x1a0/0x4ec) from [<c004d6ac>] (worker_thread+0x154/0x344) [ 137.535278] [<c004d6ac>] (worker_thread+0x154/0x344) from [<c00516b0>] (kthread+0x84/0x90) [ 137.543975] [<c00516b0>] (kthread+0x84/0x90) from [<c0013b30>] (kernel_thread_exit+0x0/0x8) [ 137.552734] Code: e59f4e5c e5941000 e3510000 0a000031 (e5971000) [ 137.559234] ---[ end trace 1b75b31a2719ed1e ]--- Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Add support for creating HCI UART based AMP controllersMarcel Holtmann1-0/+5
In reality this might never be used for real hardware, but it is a nice feature for emulating AMP controllers within a virtual machine. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Allow HCI UART reset parameter via flags ioctlMarcel Holtmann1-8/+3
The flags ioctl for HCI UART drivers already allows setting of certain Bluetooth core quirks. The reset parameter fits right in here. So allow this as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-16Merge branch 'master' of ↵Johan Hedberg1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git Conflicts: include/net/bluetooth/l2cap.h net/bluetooth/hci_conn.c net/bluetooth/l2cap_core.c
2012-02-13Bluetooth: Remove hci_dev->driver_dataDavid Herrmann1-3/+3
The linux device model provides dev_set/get_drvdata so we can use this to save private driver data. This also removes several unnecessary casts. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Remove HCI-owner fieldDavid Herrmann1-2/+0
After unregistering an hci_dev object a bluetooth driver does not have any callbacks in the hci_dev structure left over. Therefore, there is no need to keep a reference to the module. Previously, we needed this to protect the hci-destruct callback. However, this callback is no longer available so we do not need this owner field, anymore. Drivers now call hci_unregister_dev() and they are done with the object. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: uart-ldisc: Fix memory leak and remove destruct cbDavid Herrmann1-10/+2
We currently leak the hci_uart object if HCI_UART_PROTO_SET is never set because the hci-destruct callback will then never be called. This fix removes the hci-destruct callback and frees the driver internal private hci_uart object directly on tty-close. We call hci_unregister_dev() here so the hci-core will never call our callbacks again (except destruct). Therefore, we can safely free the driver internal data right away and set the destruct callback to NULL. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-06-04Revert "tty: make receive_buf() return the amout of bytes received"Linus Torvalds1-11/+6
This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Milton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23Merge branch 'tty-next' of ↵Linus Torvalds1-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.
2011-04-22tty: make receive_buf() return the amout of bytes receivedFelipe Balbi1-4/+8
it makes it simpler to keep track of the amount of bytes received and simplifies how flush_to_ldisc counts the remaining bytes. It also fixes a bug of lost bytes on n_tty when flushing too many bytes via the USB serial gadget driver. Tested-by: Stefan Bigler <stefan.bigler@keymile.com> Tested-by: Toby Gray <toby.gray@realvnc.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13Bluetooth: hci_uart: check the return value of recv()Jiejing Zhang1-2/+4
Check the return value of hu->proto->recv() in hci_uart_tty_receive() the recv() may return error, check it, not add this to statistics. Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Make hci a child of the corresponding tty device.Andrei Warkentin1-0/+1
Make /sys/class/bluetooth/hciX a symlink to path under corresponding tty. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 00:08:55 +0000