| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2018-05-18 | Bluetooth: btqcomsmd: Fix rx/tx stats | Loic Poulain | 1 | -0/+10 | |
| HCI RX/TX byte counters were only incremented when sending ACL packets. To reflect the real HCI traffic, we need to increment these counters on HCI events and HCI commands as well. Increment error counter on rpmsg errors. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | |||||
| 2017-12-13 | Bluetooth: btqcomsmd: Fix skb double free corruption | Loic Poulain | 1 | -1/+2 | |
| In case of hci send frame failure, skb is still owned by the caller (hci_core) and then should not be freed. This fixes crash on dragonboard-410c when sending SCO packet. skb is freed by both btqcomsmd and hci_core. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | |||||
| 2017-10-06 | Bluetooth: btqcomsmd: retrieve BD address from DT property | Loic Poulain | 1 | -0/+11 | |
| Retrieve BD address from the local-bd-address property. This address must be unique and is usually added in the DT by the bootloader which has access to the provisioned data. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | |||||
| 2017-10-06 | Bluetooth: btqcomsmd: Add support for BD address setup | Loic Poulain | 1 | -0/+34 | |
| This patch implements the hdev setup function since wcnss-bt does not have persistent memory to store an allocated BD address. The device is therefore marked as unconfigured if no BD address has been previously retrieved. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org | |||||
| 2017-06-16 | networking: introduce and use skb_put_data() | Johannes Berg | 1 | -1/+1 | |
| A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2017-03-28 | soc: qcom: smd: Transition client drivers from smd to rpmsg | Bjorn Andersson | 1 | -16/+16 | |
| By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2017-02-16 | Bluetooth: btqcomsmd: Fix module autoload | Javier Martinez Canillas | 1 | -0/+1 | |
| If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias $ After this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias alias: of:N*T*Cqcom,wcnss-btC* alias: of:N*T*Cqcom,wcnss-bt Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | |||||
| 2016-09-19 | Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver | Bjorn Andersson | 1 | -0/+182 | |
| The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | |||||
 |
index : linux | |
| Linux Kernel (branches are rebased on master from time to time) | Linus Torvalds |
| summaryrefslogtreecommitdiffstats |