summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/btqca.h
AgeCommit message (Collapse)AuthorFilesLines
2021-06-26Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750Venkata Lakshmi Narayana Gubba1-1/+2
1. Added support to download firmware image with mbn type for wcn6750 as it supports mbn type image. 2. If mbn type image is not present then check for tlv type image. 3. Added debug logs for mbn type image. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750Venkata Lakshmi Narayana Gubba1-0/+11
Added regulators,GPIOs and changes required to power on/off wcn6750. Added support for firmware download for wcn6750. Changes done in detail: 1. Added regulators and corresponding current values. 2. Added sw_ctrl GPIO pin which is output from BT SoC and indicates status of clock supply to BT SoC. 3. Added inline function to check if the SoC type is wcn6750. 4. Modified the function qca_wcn3990_init() to support wcn6750 and renamed it to qca_regulator_init(). Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoCVenkata Lakshmi Narayana Gubba1-0/+1
Add support to read FW build version from debugfs node. This info can be read from /sys/kernel/debug/bluetooth/hci0/firmware_info Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991Venkata Lakshmi Narayana Gubba1-4/+18
This change will allow to use different NVM file based on WCN3991 BT SoC ID.Need to use different NVM file based on fab location for WCN3991 BT SoC. Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: hci_qca: Disable SoC debug logging for WCN3991Balakrishna Godavarthi1-0/+2
By default, WCN3991 sent debug packets to HOST via ACL packet with header 0xDC2E. This logging is not required on commercial devices. With this patch SoC logging is disabled post fw download. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-02Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390Rocky Liao1-1/+2
This patch adds support for QCA6390, including the devicetree and acpi compatible hwid matching, and patch/nvm downloading. Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-3/+3
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-09Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC WCN3991Balakrishna Godavarthi1-3/+7
This patch add support for WCN3991 i.e. current values and fw download support. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-09Bluetooth: btqca: Rename ROME specific variables to generic variablesBalakrishna Godavarthi1-11/+11
Variables which are named with rome are commonly used for all the BT SoC's. Instead of continuing further, renamed them to generic name. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-12Bluetooth: hci_qca: Send VS pre shutdown command.Harish Bandi1-0/+7
WCN399x chips are coex chips, it needs a VS pre shutdown command while turning off the BT. So that chip can inform BT is OFF to other active clients. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: Load customized NVM based on the device propertyRocky Liao1-2/+4
QCA BTSOC NVM is a customized firmware file and different vendors may want to have different BTSOC configuration (e.g. Configure SCO over PCM or I2S, Setting Tx power, etc.) via this file. This patch will allow vendors to download different NVM firmware file by reading a device property "firmware-name". Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btqca: inject command complete event during fw downloadBalakrishna Godavarthi1-0/+4
Latest qualcomm chips are not sending an command complete event for every firmware packet sent to chip. They only respond with a vendor specific event for the last firmware packet. This optimization will decrease the BT ON time. Due to this we are seeing a timeout error message logs on the console during firmware download. Now we are injecting a command complete event once we receive an vendor specific event for the last RAM firmware packet. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03Bluetooth: hci_qca: Added support for WCN3998Harish Bandi1-1/+10
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible. Changed driver code to support WCN3998 Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btqca: Fix misspelling of 'baudrate'Matthias Kaehlcke1-1/+1
Rename the misspelled struct 'qca_bardrate' to 'qca_baudrate' Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-01-22Bluetooth: hci_qca: Add helper to set device addressBalakrishna Godavarthi1-1/+7
This patch add qca_set_bdaddr() to set the device address for latest Qualcomm Bluetooth chipset wcn3990 and above. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990Balakrishna Godavarthi1-0/+3
Add support to set voltage/current of various regulators to power up/down Bluetooth chip wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Redefine qca_uart_setup() to generic function.Balakrishna Godavarthi1-2/+11
Redefinition of qca_uart_setup will help future Qualcomm Bluetooth SoC, to use the same function instead of duplicating the function. Added new arguments soc_type and soc_ver to the functions. These arguments will help to decide type of firmware files to be loaded into Bluetooth chip. soc_type holds the Bluetooth chip connected to APPS processor. soc_ver holds the Bluetooth chip version. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Rename ROME specific functions to generic functionsBalakrishna Godavarthi1-2/+8
Some of the QCA BTSoC ROME functions, are used for different versions or different make of BTSoC's. Instead of duplicating the same functions for new chip, update names of the functions that are used for both chips to keep this generic and would help in future when we would have new BT SoC. To have generic text in logs updated from ROME to QCA where ever possible. This avoids confusion to user, when using the future Qualcomm Bluetooth SoC's. Updated BT_DBG, BT_ERR and BT_INFO with bt_dev_dbg, bt_dev_err and bt_dev_info where ever applicable. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btqca: Add AR3002 rampatch supportLoic Poulain1-1/+10
This patch adds rampatch download compatibility for ROME >= 3.2. Starting with ROME 3.2, the 'download mode' field of the rampatch header indicates if the controller acknowledges (or not) the received rampatch segments. If not, we need to send all the segments without expecting any event from the controller (except for the last segment). Goal is (I assume) to speed-up rampatch download. This fixes BT on Dragonboard-600c P2 which includes the following BT controller: hci0: ROME Patch Version Request hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000023 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10Bluetooth: btqca: Introduce generic QCA ROME supportBen Young Tae Kim1-0/+135
This is for supporting BT for QCA ROME with vendor specific HCI commands and initialization on the chip. This will have USB/UART implementation both, but for now, adding UART vendor specific commands to patch downloading and set Bluetooth device address using vendor specific command. Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>