summaryrefslogtreecommitdiffstats
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2020-05-21null_blk: return error for invalid zone sizeChaitanya Kulkarni1-0/+4
In null_init_zone_dev() check if the zone size is larger than device capacity, return error if needed. This also fixes the following oops :- null_blk: changed the number of conventional zones to 4294967295 BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0 Oops: 0002 [#1] SMP NOPTI CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4 RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk] RSP: 0018:ffffc90007007e00 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510 RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000 R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0 Call Trace: null_add_dev+0x534/0x71b [null_blk] nullb_device_power_store.cold.41+0x8/0x2e [null_blk] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x60/0x250 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fcb51c71840 Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Add LOOP_CONFIGURE ioctlMartijn Coenen1-28/+76
This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Clean up LOOP_SET_STATUS lo_flags handlingMartijn Coenen1-6/+13
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this explicit by updating the UAPI to include the flags that can be set/cleared using this ioctl. The implementation can then blindly take over the passed in flags, and use the previous flags for those flags that can't be set / cleared using LOOP_SET_STATUS. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Rework lo_ioctl() __user argument castingMartijn Coenen1-6/+5
In preparation for a new ioctl that needs to copy_from_user(); makes the code easier to read as well. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Move loop_set_status_from_info() and friends upMartijn Coenen1-103/+103
So we can use it without forward declaration. This is a separate commit to make it easier to verify that this is just a move, without functional modifications. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Factor out configuring loop from statusMartijn Coenen1-50/+67
Factor out this code into a separate function, so it can be reused by other code more easily. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Remove figure_loop_size()Martijn Coenen1-9/+4
This function was now only used by loop_set_capacity(). Just open code the remaining code in the caller instead. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Refactor loop_set_status() size calculationMartijn Coenen1-18/+19
figure_loop_size() calculates the loop size based on the passed in parameters, but at the same time it updates the offset and sizelimit parameters in the loop device configuration. That is a somewhat unexpected side effect of a function with this name, and it is only only needed by one of the two callers of this function - loop_set_status(). Move the lo_offset and lo_sizelimit assignment back into loop_set_status(), and use the newly factored out functions to validate and apply the newly calculated size. This allows us to get rid of figure_loop_size() in a follow-up commit. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Switch to set_capacity_revalidate_and_notify()Martijn Coenen1-3/+2
This was recently added to block/genhd.c, and takes care of both updating the capacity and notifying userspace of the new size. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Factor out setting loop device sizeMartijn Coenen1-9/+21
This code is used repeatedly. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Remove sector_t truncation checksMartijn Coenen1-14/+7
sector_t is now always u64, so we don't need to check for truncation. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Call loop_config_discard() only after new config is appliedMartijn Coenen1-2/+2
loop_set_status() calls loop_config_discard() to configure discard for the loop device; however, the discard configuration depends on whether the loop device uses encryption, and when we call it the encryption configuration has not been updated yet. Move the call down so we apply the correct discard configuration based on the new configuration. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19rnbd/rtrs: Pass max segment size from blk user to the rdma libraryDanil Kipnis1-0/+1
When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined. The rtrs is a transport library and should compile independently of the block layer. The desired max segment size should be passed down by the user. Introduce max_segment_size parameter for the rtrs_clt_open() call. Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality") Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Fixes: cb80329c9434 ("RDMA/rtrs: client: private header with client structs and functions") Fixes: b5c27cdb094e ("RDMA/rtrs: public interface header to establish RDMA connections") Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-19null_blk: Zero-initialize read buffers in non-memory-backed modeBart Van Assche1-0/+26
This patch suppresses an uninteresting KMSAN complaint without affecting performance of the null_blk driver if CONFIG_KMSAN is disabled. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Alexander Potapenko <glider@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19ps3disk: use the default segment boundaryEmmanuel Nicolet1-1/+0
Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0: kernel BUG at block/bio.c:1853! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 <SF,EE,IR,DR,RI> CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]--- The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement. Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem. Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.1589049250.git.geoff@infradead.org
2020-05-17block/rnbd: a bit of documentationJack Wang1-0/+92
README with description of major sysfs entries, sysfs documentation are moved to ABI dir as Bart suggested. Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: include client and server modules into kernel compilationJack Wang4-0/+46
Add rnbd Makefile, Kconfig and also corresponding lines into upper block layer files. Link: https://lore.kernel.org/r/20200511135131.27580-24-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: server: sysfs interface functionsJack Wang1-0/+215
This is the sysfs interface to rnbd mapped devices on server side: /sys/class/rnbd-server/ctl/devices/<device_name>/ |- block_dev | *** link pointing to the corresponding block device sysfs entry | |- sessions/<session-name>/ | *** sessions directory | |- read_only | *** is devices mapped as read only | |- mapping_path *** relative device path provided by the client during mapping Link: https://lore.kernel.org/r/20200511135131.27580-23-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: server: functionality for IO submitting to block devJack Wang2-0/+226
This provides helper functions for IO submitting to block dev. Link: https://lore.kernel.org/r/20200511135131.27580-22-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: server: main functionalityJack Wang1-0/+844
This is main functionality of rnbd-server module, which handles RTRS events and rnbd protocol requests, like map (open) or unmap (close) device. Also server side is responsible for processing incoming IBTRS IO requests and forward them to local mapped devices. Link: https://lore.kernel.org/r/20200511135131.27580-21-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: server: private header with server structs and functionsJack Wang1-0/+78
This header describes main structs and functions used by rnbd-server module, namely structs for managing sessions from different clients and mapped (opened) devices. Link: https://lore.kernel.org/r/20200511135131.27580-20-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: client: sysfs interface functionsJack Wang1-0/+636
This is the sysfs interface to rnbd block devices on client side: /sys/class/rnbd-client/ctl/ |- map_device | *** maps remote device | |- devices/ *** all mapped devices /sys/block/rnbd<N>/rnbd/ |- unmap_device | *** unmaps device | |- state | *** device state | |- session | *** session name | |- mapping_path *** path of the dev that was mapped on server Link: https://lore.kernel.org/r/20200511135131.27580-19-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: client: main functionalityJack Wang1-0/+1729
This is main functionality of rnbd-client module, which provides interface to map remote device as local block device /dev/rnbd<N> and feeds RTRS with IO requests. Link: https://lore.kernel.org/r/20200511135131.27580-18-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: client: private header with client structs and functionsJack Wang1-0/+156
This header describes main structs and functions used by rnbd-client module, mainly for managing RNBD sessions and mapped block devices, creating and destroying sysfs entries. Link: https://lore.kernel.org/r/20200511135131.27580-17-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-17block/rnbd: private headers with rnbd protocol structs and helpersJack Wang3-0/+367
These are common private headers with rnbd protocol structures, logging, sysfs and other helper functions, which are used on both client and server sides. Link: https://lore.kernel.org/r/20200511135131.27580-16-danil.kipnis@cloud.ionos.com Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-16block/swim3: use set_current_state macroXu Wang1-3/+3
Use set_current_state macro instead of current->state = TASK_RUNNING. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12null_blk: Support REQ_OP_ZONE_APPENDDamien Le Moal1-8/+29
Support REQ_OP_ZONE_APPEND requests for null_blk devices with zoned mode enabled. Use the internally tracked zone write pointer position as the actual write position and return it using the command request __sector field in the case of an mq device and using the command BIO sector in the case of a BIO device. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12block: Modify revalidate zonesDamien Le Moal1-1/+1
Modify the interface of blk_revalidate_disk_zones() to add an optional driver callback function that a driver can use to extend processing done during zone revalidation. The callback, if defined, is executed with the device request queue frozen, after all zones have been inspected. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12floppy: suppress UBSAN warning in setup_rw_floppy()Denis Efremov1-2/+2
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45 index 16 is out of range for type 'unsigned char [16]' Call Trace: ... setup_rw_floppy+0x5c3/0x7f0 floppy_ready+0x2be/0x13b0 process_one_work+0x2c1/0x5d0 worker_thread+0x56/0x5e0 kthread+0x122/0x170 ret_from_fork+0x35/0x40 From include/uapi/linux/fd.h: struct floppy_raw_cmd { ... unsigned char cmd_count; unsigned char cmd[16]; unsigned char reply_count; unsigned char reply[16]; ... } This out-of-bounds access is intentional. The command in struct floppy_raw_cmd may take up the space initially intended for the reply and the reply count. It is needed for long 82078 commands such as RESTORE, which takes 17 command bytes. Initial cmd size is not enough and since struct setup_rw_floppy is a part of uapi we check that cmd_count is in [0:16+1+16] in raw_cmd_copyin(). The patch adds union with original cmd,reply_count,reply fields and fullcmd field of equivalent size. The cmd accesses are turned to fullcmd where appropriate to suppress UBSAN warning. Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add defines for sizes of cmd & reply buffers of floppy_raw_cmdDenis Efremov1-14/+5
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers for cmd & reply buffers of struct floppy_raw_cmd. Remove local to floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE. FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count and reply fields. Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add FD_AUTODETECT_SIZE define for struct floppy_drive_paramsDenis Efremov1-4/+5
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct floppy_drive_params instead of a magic number. Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: use print_hex_dump() in setup_DMA()Denis Efremov1-6/+3
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the contents of the cmd buffer. Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com Suggested-by: Joe Perches <joe@perches.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make set_fdc() always set current_drive and current_fdWilly Tarreau1-14/+29
When called with a negative drive value, set_fdc() would stick to the current fdc (which was assumed to reflect the current_drive's FDC). We do not need this anymore as the last call place with a negative value was just addressed. Let's make this function always set both current_fdc and current_drive so that there's no more ambiguity. A few comments stating this were added to a few non-obvious places. Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: get rid of current_reqD in favor of current_driveWilly Tarreau1-6/+2
This macro equals -1 and is used as an alternative for current_drive when calling reschedule_timeout(), which in turn needs to remap it. This only adds obfuscation, let's simply use current_drive. Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: make sure to reset all FDCs upon resume()Willy Tarreau1-2/+4
In floppy_resume() we don't properly reinitialize all FDCs, instead we reinitialize the current FDC once per available FDC because value -1 is passed to user_reset_fdc(). Let's simply save the current drive and properly reinitialize each FDC. Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in do_floppy_init()Willy Tarreau1-20/+18
There's no need to iterate on current_fdc in do_floppy_init() anymore, in the first case it's only used as an array index to access fdc_state[], so let's get rid of this confusing assignment. The second case is a bit trickier because user_reset_fdc() needs to already know current_fdc when called with drive==-1 due to this call chain: user_reset_fdc() lock_fdc() set_fdc() drive<0 ==> new_fdc = current_fdc Note that current_drive is not used in this code part and may even not match a unit belonging to current_fdc. Instead of passing -1 we can simply pass the first drive of the FDC being initialized, which is even cleaner as it will allow the function chain above to consistently assign both variables. Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: add a few comments about expectations in certain functionsWilly Tarreau1-1/+13
The locking in the driver is far from being obvious, with unlocking automatically happening at end of operations scheduled by interrupt, especially for the error paths where one does not necessarily expect that such an interrupt may be triggered. Let's add a few comments about what to expect at certain places to avoid misdetecting bugs which are not. Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in DMA grab/release functionsWilly Tarreau1-19/+20
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to iterate on the global variable while setting up or freeing resources. Now that they exclusively rely on functions which take the fdc as an argument, so let's not touch the global one anymore. Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make get_fdc_version() not rely on current_fdc anymoreWilly Tarreau1-26/+26
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make next_valid_format() not rely on current_drive anymoreWilly Tarreau1-8/+8
Now the drive is passed in argument so that the function does not use current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make check_wp() not rely on current_{fdc,drive} anymoreWilly Tarreau1-13/+13
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make fdc_specify() not rely on current_{fdc,drive} anymoreWilly Tarreau1-21/+21
Now the fdc and drive are passed in argument so that the function does not use current_fdc nor current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make fdc_configure() not rely on current_fdc anymoreWilly Tarreau1-9/+8
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make perpendicular_mode() not rely on current_fdc anymoreWilly Tarreau1-8/+8
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single raw_cmd pointer specific to the current fdc. It may make sense to have one per fdc in the future. In addition, cont->done() still relies on the current drive and current raw_cmd. Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make need_more_output() not rely on current_fdc anymoreWilly Tarreau1-6/+6
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make result() not rely on current_fdc anymoreWilly Tarreau1-15/+15
Now the fdc is passed in argument so that the function does not use current_fdc anymore. It's worth noting that there's still a single reply_buffer[] which will store the result for the current fdc. It may or may not make sense to implement one buffer per fdc in the future. Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make output_byte() not rely on current_fdc anymoreWilly Tarreau1-32/+32
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make wait_til_ready() not rely on current_fdc anymoreWilly Tarreau1-9/+9
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make show_floppy() not rely on current_fdc anymoreWilly Tarreau1-7/+7
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make reset_fdc_info() not rely on current_fdc anymoreWilly Tarreau1-10/+10
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 08:46:50 +0000