| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pull ceph fix from Ilya Dryomov:
"A small fix for rbd FALLOC_FL_ZERO_RANGE/PUNCH_HOLE handling breakage
introduced in -rc1"
* tag 'ceph-for-4.12-rc4' of git://github.com/ceph/ceph-client:
rbd: implement REQ_OP_WRITE_ZEROES
|
|
nbd_config is allocated in nbd_alloc_config(), but never freed.
Fixes: 5ea8d10802ec ("nbd: separate out the config information")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There is nothing to clear -- nbd_device has just been allocated.
Fold nbd_reset() into its other caller, nbd_config_put().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Commit 93c1defedcae ("rbd: remove the discard_zeroes_data flag")
explicitly didn't implement REQ_OP_WRITE_ZEROES for rbd, while the
following commit 48920ff2a5a9 ("block: remove the discard_zeroes_data
flag") dropped ->discard_zeroes_data in favor of REQ_OP_WRITE_ZEROES.
rbd does support efficient zeroing via CEPH_OSD_OP_ZERO opcode and will
release either some or all blocks depending on whether the zeroing
request is rbd_obj_bytes() aligned. This is how we currently implement
discards, so REQ_OP_WRITE_ZEROES can be identical to REQ_OP_DISCARD for
now. Caveats:
- REQ_NOUNMAP is ignored, but AFAICT that's true of at least two other
current implementations - nvme and loop
- there is no ->write_zeroes_alignment and blk_bio_write_zeroes_split()
is hence less helpful than blk_bio_discard_split(), but this can (and
should) be fixed on the rbd side
In the future we will split these into two code paths to respect
REQ_NOUNMAP on zeroout and save on zeroing blocks that couldn't be
released on discard.
Fixes: 93c1defedcae ("rbd: remove the discard_zeroes_data flag")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
"A small collection of fixes that should go into this cycle.
- a pull request from Christoph for NVMe, which ended up being
manually applied to avoid pulling in newer bits in master. Mostly
fibre channel fixes from James, but also a few fixes from Jon and
Vijay
- a pull request from Konrad, with just a single fix for xen-blkback
from Gustavo.
- a fuseblk bdi fix from Jan, fixing a regression in this series with
the dynamic backing devices.
- a blktrace fix from Shaohua, replacing sscanf() with kstrtoull().
- a request leak fix for drbd from Lars, fixing a regression in the
last series with the kref changes. This will go to stable as well"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvmet: release the sq ref on rdma read errors
nvmet-fc: remove target cpu scheduling flag
nvme-fc: stop queues on error detection
nvme-fc: require target or discovery role for fc-nvme targets
nvme-fc: correct port role bits
nvme: unmap CMB and remove sysfs file in reset path
blktrace: fix integer parse
fuseblk: Fix warning in super_setup_bdi_name()
block: xen-blkback: add null check to avoid null pointer dereference
drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Pull a single fix from Konrad.
|
|
Add null check before calling xen_blkif_put() to avoid potential
null pointer dereference.
Addresses-Coverity-ID: 1350942
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
When killing kref_sub(), the unconditional additional kref_get()
was not properly paired with the necessary kref_put(), causing
a leak of struct drbd_requests (~ 224 Bytes) per submitted bio,
and breaking DRBD in general, as the destructor of those "drbd_requests"
does more than just the mempoll_free().
Fixes: bdfafc4ffdd2 ("locking/atomic, kref: Kill kref_sub()")
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pull virtio updates from Michael Tsirkin:
"Fixes, cleanups, performance
A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
batched zeroing - first of batching enhancements that seems ready."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
s390/virtio: change maintainership
tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
virtio_net: tidy a couple debug statements
ptr_ring: support testing different batching sizes
ringtest: support test specific parameters
ptr_ring: batch ring zeroing
virtio: virtio_driver doc
virtio_net: don't reset twice on XDP on/off
virtio_net: fix support for small rings
virtio_net: reduce alignment for buffers
virtio_net: rework mergeable buffer handling
virtio_net: allow specifying context for rx
virtio: allow extra context per descriptor
tools/virtio: fix build breakage
virtio: add context flag to find vqs
virtio: wrap find_vqs
ringtest: fix an assert statement
|
|
Pull ceph updates from Ilya Dryomov:
"The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling
series from Jeff.
The former will allow rbd users to take advantage of exclusive lock's
built-in blacklist/break-lock functionality while staying in control
of who owns the lock. With the latter in place, we will abort
filesystem writes on -ENOSPC instead of having them block
indefinitely.
Beyond that we've got the usual pile of filesystem fixes from Zheng,
some refcount_t conversion patches from Elena and a patch for an
ancient open() flags handling bug from Alexander"
* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
ceph: fix memory leak in __ceph_setxattr()
ceph: fix file open flags on ppc64
ceph: choose readdir frag based on previous readdir reply
rbd: exclusive map option
rbd: return ResponseMessage result from rbd_handle_request_lock()
rbd: kill rbd_is_lock_supported()
rbd: support updating the lock cookie without releasing the lock
rbd: store lock cookie
rbd: ignore unlock errors
rbd: fix error handling around rbd_init_disk()
rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
ceph: when seeing write errors on an inode, switch to sync writes
Revert "ceph: SetPageError() for writeback pages if writepages fails"
ceph: handle epoch barriers in cap messages
libceph: add an epoch_barrier field to struct ceph_osd_client
libceph: abort already submitted but abortable requests when map or pool goes full
libceph: allow requests to return immediately on full conditions if caller wishes
libceph: remove req->r_replay_version
ceph: make seeky readdir more efficient
...
|
|
We now have memalloc_noreclaim_{save,restore} helpers for robust setting
and clearing of PF_MEMALLOC. Let's convert the code which was using the
generic tsk_restore_flags(). No functional change.
[vbabka@suse.cz: in net/core/sock.c the hunk is missing]
Link: http://lkml.kernel.org/r/20170405074700.29871-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Wouter Verhelst <w@uter.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CURRENT_TIME is not y2038 safe. The macro will be deleted and all the
references to it will be replaced by ktime_get_* apis.
struct timespec is also not y2038 safe. Retain timespec for timestamp
representation here as ceph uses it internally everywhere. These
references will be changed to use struct timespec64 in a separate patch.
The current_fs_time() api is being changed to use vfs struct inode* as
an argument instead of struct super_block*.
Set the new mds client request r_stamp field using ktime_get_real_ts()
instead of using current_fs_time().
Also, since r_stamp is used as mtime on the server, use timespec_trunc()
to truncate the timestamp, using the right granularity from the
superblock.
This api will be transitioned to be y2038 safe along with vfs.
Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
M: Ilya Dryomov <idryomov@gmail.com>
M: "Yan, Zheng" <zyan@redhat.com>
M: Sage Weil <sage@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__vmalloc* allows users to provide gfp flags for the underlying
allocation. This API is quite popular
$ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
77
The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space. About half of users don't
use this flag, though. This signals that we make the API unnecessarily
too complex.
This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM
are simplified and drop the flag.
Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes and updates from Jens Axboe:
"Some fixes and followup features/changes that should go in, in this
merge window. This contains:
- Two fixes for lightnvm from Javier, fixing problems in the new code
merge previously in this merge window.
- A fix from Jan for the backing device changes, fixing an issue in
NFS that causes a failure to mount on certain setups.
- A change from Christoph, cleaning up the blk-mq init and exit
request paths.
- Remove elevator_change(), which is now unused. From Bart.
- A fix for queue operation invocation on a dead queue, from Bart.
- A series fixing up mtip32xx for blk-mq scheduling, removing a
bandaid we previously had in place for this. From me.
- A regression fix for this series, fixing a case where we wait on
workqueue flushing from an invalid (non-blocking) context. From me.
- A fix/optimization from Ming, ensuring that we don't both quiesce
and freeze a queue at the same time.
- A fix from Peter on lock ordering for CPU hotplug. Not a real
problem right now, but will be once the CPU hotplug rework goes in.
- A series from Omar, cleaning up out blk-mq debugfs support, and
adding support for exporting info from schedulers in debugfs as
well. This is really useful in debugging stalls or livelocks. From
Omar"
* 'for-linus' of git://git.kernel.dk/linux-block: (28 commits)
mq-deadline: add debugfs attributes
kyber: add debugfs attributes
blk-mq-debugfs: allow schedulers to register debugfs attributes
blk-mq: untangle debugfs and sysfs
blk-mq: move debugfs declarations to a separate header file
blk-mq: Do not invoke queue operations on a dead queue
blk-mq-debugfs: get rid of a bunch of boilerplate
blk-mq-debugfs: rename hw queue directories from <n> to hctx<n>
blk-mq-debugfs: don't open code strstrip()
blk-mq-debugfs: error on long write to queue "state" file
blk-mq-debugfs: clean up flag definitions
blk-mq-debugfs: separate flags with |
nfs: Fix bdi handling for cloned superblocks
block/mq: Cure cpu hotplug lock inversion
lightnvm: fix bad back free on error path
lightnvm: create cmd before allocating request
blk-mq: don't use sync workqueue flushing from drivers
mtip32xx: convert internal commands to regular block infrastructure
mtip32xx: cleanup internal tag assumptions
block: don't call blk_mq_quiesce_queue() after queue is frozen
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has been in multiple -next releases. There were a few
late breaking fixes and small features that got added in the last
couple days, but the whole set has received a build success
notification from the kbuild robot.
Change summary:
- Region media error reporting: A libnvdimm region device is the
parent to one or more namespaces. To date, media errors have been
reported via the "badblocks" attribute attached to pmem block
devices for namespaces in "raw" or "memory" mode. Given that
namespaces can be in "device-dax" or "btt-sector" mode this new
interface reports media errors generically, i.e. independent of
namespace modes or state.
This subsequently allows userspace tooling to craft "ACPI 6.1
Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
requests and submit them via the ioctl path for NVDIMM root bus
devices.
- Introduce 'struct dax_device' and 'struct dax_operations': Prompted
by a request from Linus and feedback from Christoph this allows for
dax capable drivers to publish their own custom dax operations.
This fixes the broken assumption that all dax operations are
related to a persistent memory device, and makes it easier for
other architectures and platforms to add customized persistent
memory support.
- 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
available for storage appliance applications to manually trigger
memory controllers to drain write-pending buffers that would
otherwise be flushed automatically by the platform ADR
(asynchronous-DRAM-refresh) mechanism at a power loss event.
Support for "locked" DIMMs is included to prevent namespaces from
surfacing when the namespace label data area is locked. Finally,
fixes for various reported deadlocks and crashes, also tagged for
-stable.
- ACPI / nfit driver updates: General updates of the nfit driver to
add DSM command overrides, ACPI 6.1 health state flags support, DSM
payload debug available by default, and various fixes.
Acknowledgements that came after the branch was pushed:
- commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock":
Tested-by: Yi Zhang <yizhan@redhat.com>
- commit 23f498448362 "libnvdimm: rework region badblocks clearing"
Tested-by: Toshi Kani <toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
libnvdimm, pfn: fix 'npfns' vs section alignment
libnvdimm: handle locked label storage areas
libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
brd: fix uninitialized use of brd->dax_dev
block, dax: use correct format string in bdev_dax_supported
device-dax: fix sysfs attribute deadlock
libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
libnvdimm: rework region badblocks clearing
acpi, nfit: kill ACPI_NFIT_DEBUG
libnvdimm: fix clear length of nvdimm_forget_poison()
libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
libnvdimm, region: sysfs trigger for nvdimm_flush()
libnvdimm: fix phys_addr for nvdimm_clear_poison
x86, dax, pmem: remove indirection around memcpy_from_pmem()
block: remove block_device_operations ->direct_access()
block, dax: convert bdev_dax_supported() to dax_direct_access()
filesystem-dax: convert to dax_direct_access()
Revert "block: use DAX for partition table reads"
ext2, ext4, xfs: retrieve dax_device for iomap operations
...
|
|
Support disabling automatic exclusive lock transfers to allow users
to be in charge of which node should own the lock while being able to
reuse exclusive lock's built-in blacklist/break-lock functionality.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
Right now it's just 0, but "no automatic exclusive lock transfers" mode
code will need -EROFS.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
Currently the exclusive lock is acquired only if the mapping is
writable, i.e. an image HEAD mapped in rw mode. This means that we
don't acquire the lock for executing a read from a snapshot or an image
HEAD mapped in ro mode, even if lock_on_read is set. This is somewhat
weird and inconsistent with "no automatic exclusive lock transfers"
mode, where the lock is acquired unconditionally.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
As we no longer release the lock before potentially raising BLACKLISTED
in rbd_reregister_watch(), the "either locked or blacklisted" assert in
rbd_queue_workfn() needs to go: we can be both locked and blacklisted
at that point now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
In preparation for supporting set_cookie method (or rather set_cookie
fallback for older OSDs), store the lock cookie on lock and use it on
unlock instead of recalculating from rbd_dev->watch_cookie.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
Currently the lock_state is set to UNLOCKED (preventing further I/O),
but RELEASED_LOCK notification isn't sent. Be consistent with userspace
and treat ceph_cls_unlock() errors as the image is unlocked.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
add_disk() takes an extra reference on disk->queue, which is put in
put_disk() -> disk_release(). Avoiding blk_cleanup_queue() (which also
puts the queue) until add_disk() sets GENHD_FL_UP works for the queue
itself, but leaks various queue internals. Conditioning tag_set freeing
on GENHD_FL_UP is wrong too: all error paths after rbd_init_disk() leak
the tag_set.
Move the final "announce" steps out of rbd_dev_device_setup() so that
it can be unwound like any other function. Leave "announce" steps to
do_rbd_add/remove().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
rbd_dev->disk tear down vs rbd_watch_cb() race shouldn't be a problem
anymore thanks to EXISTS and REMOVING checks in rbd_dev_update_size().
A similar race could occur on "rbd map", see commit 811c66887746
("rbd: fix rbd map vs notify races").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
... to simplify error handling in do_rbd_add().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In page_same_filled function, all elements in the page is compared with
next index value. The current comparison routine compares the (i)th and
(i+1)th values of the page.
In this case, two load operaions occur for each comparison. But if we
store first value of the page stores at 'val' variable and using it to
compare with others, the load opearation is reduced. It reduce load
operation per page by up to 64times.
Link: http://lkml.kernel.org/r/1488428104-7257-1-git-send-email-sangwoo2.park@lge.com
Signed-off-by: Sangwoo Park <sangwoo2.park@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The zram_free_page already handles NULL handle case and same page so use
it to reduce error probability. (Acutaully, I made a mistake when I
handled same page feature)
Link: http://lkml.kernel.org/r/1492052365-16169-7-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With element, sometime I got confused handle and element access. It
might be my bad but I think it's time to introduce accessor to prevent
future idiot like me. This patch is just clean-up patch so it shouldn't
change any behavior.
Link: http://lkml.kernel.org/r/1492052365-16169-6-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's redundant now. Instead, remove it and use zram structure directly.
Link: http://lkml.kernel.org/r/1492052365-16169-5-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With this clean-up phase, I want to use zram's wrapper function to lock
table access which is more consistent with other zram's functions.
Link: http://lkml.kernel.org/r/1492052365-16169-4-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For architecture(PAGE_SIZE > 4K), zram have supported partial IO.
However, the mixed code for handling normal/partial IO is too mess,
error-prone to modify IO handler functions with upcoming feature so this
patch aims for cleaning up zram's IO handling functions.
Link: http://lkml.kernel.org/r/1492052365-16169-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "zram clean up", v2.
This patchset aims to clean up zram .
[1] clean up multiple pages's bvec handling.
[2] clean up partial IO handling
[3-6] clean up zram via using accessor and removing pointless structure.
With [2-6] applied, we can get a few hundred bytes as well as huge
readibility enhance.
x86: 708 byte save
add/remove: 1/1 grow/shrink: 0/11 up/down: 478/-1186 (-708)
function old new delta
zram_special_page_read - 478 +478
zram_reset_device 317 314 -3
mem_used_max_store 131 128 -3
compact_store 96 93 -3
mm_stat_show 203 197 -6
zram_add 719 712 -7
zram_slot_free_notify 229 214 -15
zram_make_request 819 803 -16
zram_meta_free 128 111 -17
zram_free_page 180 151 -29
disksize_store 432 361 -71
zram_decompress_page.isra 504 - -504
zram_bvec_rw 2592 2080 -512
Total: Before=25350773, After=25350065, chg -0.00%
ppc64: 231 byte save
add/remove: 2/0 grow/shrink: 1/9 up/down: 681/-912 (-231)
function old new delta
zram_special_page_read - 480 +480
zram_slot_lock - 200 +200
vermagic 39 40 +1
mm_stat_show 256 248 -8
zram_meta_free 200 184 -16
zram_add 944 912 -32
zram_free_page 348 308 -40
disksize_store 572 492 -80
zram_decompress_page 664 564 -100
zram_slot_free_notify 292 160 -132
zram_make_request 1132 1000 -132
zram_bvec_rw 2768 2396 -372
Total: Before=17565825, After=17565594, chg -0.00%
This patch (of 6):
Johannes Thumshirn reported system goes the panic when using NVMe over
Fabrics loopback target with zram.
The reason is zram expects each bvec in bio contains a single page
but nvme can attach a huge bulk of pages attached to the bio's bvec
so that zram's index arithmetic could be wrong so that out-of-bound
access makes system panic.
[1] in mainline solved solved the problem by limiting max_sectors with
SECTORS_PER_PAGE but it makes zram slow because bio should split with
each pages so this patch makes zram aware of multiple pages in a bvec
so it could solve without any regression(ie, bio split).
[1] 0bc315381fe9, zram: set physical queue limits to avoid array out of
bounds accesses
Link: http://lkml.kernel.org/r/20170413134057.GA27499@bbox
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 1647b9b9 "brd: add dax_operations support" introduced the allocation
and freeing of a dax_device, but the allocated dax_device is not stored
into the brd_device, so brd_del_one() will eventually operate on an
uninitialized brd->dax_dev.
Fix this by storing the allocated dax_device to brd->dax_dev.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Get rid of the private end_io handlers and data, and just use the
regular block IO path for these requests. This removes a lot of
redundant code.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We don't decode the internal tag to the proper group or tag
indx. This works fine because we have hard wired it as 0 for now,
but could break if we get rid of that.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
tty: fix comment for __tty_alloc_driver()
init/main: properly align the multi-line comment
init/main: Fix double "the" in comment
Fix dead URLs to ftp.kernel.org
drivers: Clean up duplicated email address
treewide: Fix typo in xml/driver-api/basics.xml
tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
selftests/timers: Spelling s/privledges/privileges/
HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
net: phy: dp83848: Fix Typo
UBI: Fix typos
Documentation: ftrace.txt: Correct nice value of 120 priority
net: fec: Fix typo in error msg and comment
treewide: Fix typos in printk
|
|
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
|
We are going to add more parameters to find_vqs, let's wrap the call so
we don't need to tweak all drivers every time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq. Except for a superflous check in
mtip32xx it was unused anyway.
Also pass the tag_set instead of just the driver data - this allows drivers
to avoid some code duplication in a follow on cleanup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This reverts commit 4981d04dd8f1ab19e2cce008da556d7f099b6e68.
The driver has been converted to using the proper infrastructure
for issuing internal commands. This means it's now safe to use with
the scheduling infrastruture, so we can now revert the change
that turned off scheduling for mtip32xx.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The driver special cases certain things for command issue, depending
on whether it's an internal command or not. Make the internal commands
use the regular infrastructure for issuing IO.
Since this is an 8-group souped up AHCI variant, we have to deal
with NCQ vs non-queueable commands. Do this from the queue_rq
handler, by backing off unless the drive is idle.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This is a prep patch for backoff in ->queue_rq() for non-ncq commands.
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
All callers now pass in GFP_KERNEL, get rid of the argument.
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
All callers can safely block. Kill the atomic/block argument, and
remove the argument from all callers.
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- another round of rq-clock handling debugging, robustization and
fixes
- PELT accounting improvements
- CPU hotplug related ->cpus_allowed affinity handling fixes all
around the tree
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
sched/x86: Update reschedule warning text
crypto: N2 - Replace racy task affinity logic
cpufreq/sparc-us2e: Replace racy task affinity logic
cpufreq/sparc-us3: Replace racy task affinity logic
cpufreq/sh: Replace racy task affinity logic
cpufreq/ia64: Replace racy task affinity logic
ACPI/processor: Replace racy task affinity logic
ACPI/processor: Fix error handling in __acpi_processor_start()
sparc/sysfs: Replace racy task affinity logic
powerpc/smp: Replace open coded task affinity logic
ia64/sn/hwperf: Replace racy task affinity logic
ia64/salinfo: Replace racy task affinity logic
workqueue: Provide work_on_cpu_safe()
ia64/topology: Remove cpus_allowed manipulation
sched/fair: Move the PELT constants into a generated header
sched/fair: Increase PELT accuracy for small tasks
sched/fair: Fix comments
sched/Documentation: Add 'sched-pelt' tool
sched/fair: Fix corner case in __accumulate_sum()
sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
...
|
|
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
|
|
list_for_each_entry() isn't super safe if we're freeing the objects
while we traverse the list. Also don't bother taking the extra
reference, the module refcounting stuff will save us from having anybody
messing with the device while we're trying to unload.
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
mtip32xx supposes that 'request_idx' passed to .init_request()
is tag of the request, and use that as request's tag to initialize
command header.
After MQ IO scheduler is in, request tag assigned isn't same with
the request index anymore, so cause strange hardware failure on
mtip32xx, even whole system panic is triggered.
This patch fixes the issue by initializing command header via
request's real tag.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Now that all the producers and consumers of dax interfaces have been
converted to using dax_operations on a dax_device, remove the block
device direct_access enabling.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
