| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The virtblk_map_data() function returns negative error codes, however, the
'nents' field of vbr->sg_table is an unsigned int, which causes the error
handling not to work correctly.
Cc: stable@vger.kernel.org
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
We use UINT_MAX to limit max_discard_sectors in virtblk_probe,
we can use UINT_MAX to limit max_hw_sectors for consistencies.
No functional change intended.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221110030124.1986-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ida_simple[get|remove] are deprecated, and are just wrappers to
ida_[alloc_range|free]. Replace ida_simple[get|remove] with their
corresponding counterparts.
No functional changes.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20221130123001.25473-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull virtio updates from Michael Tsirkin:
- 9k mtu perf improvements
- vdpa feature provisioning
- virtio blk SECURE ERASE support
- fixes and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: don't try to use intxif pin is zero
vDPA: conditionally read MTU and MAC in dev cfg space
vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
vDPA: check virtio device features to detect MQ
vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
vDPA: only report driver features if FEATURES_OK is set
vDPA: allow userspace to query features of a vDPA device
virtio_blk: add SECURE ERASE command support
vp_vdpa: support feature provisioning
vdpa_sim_net: support feature provisioning
vdpa: device feature provisioning
virtio-net: use mtu size as buffer length for big packets
virtio-net: introduce and use helper function for guest gso support checks
virtio: drop vp_legacy_set_queue_size
virtio_ring: make vring_alloc_queue_packed prettier
virtio_ring: split: Operators use unified style
vhost: add __init/__exit annotations to module init/exit funcs
|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
|
|
Support for the VIRTIO_BLK_F_SECURE_ERASE VirtIO feature.
A device that offers this feature can receive VIRTIO_BLK_T_SECURE_ERASE
commands.
A device which supports this feature has the following fields in the
virtio config:
- max_secure_erase_sectors
- max_secure_erase_seg
- secure_erase_sector_alignment
max_secure_erase_sectors and secure_erase_sector_alignment are expressed
in 512-byte units.
Every secure erase command has the following fields:
- sectors: The starting offset in 512-byte units.
- num_sectors: The number of sectors.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20220921082729.2516779-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If a request fails at virtio_queue_rqs(), it is inserted to requeue_list
and passed to virtio_queue_rq(). Then blk_mq_start_request() can be called
again at virtio_queue_rq() and trigger WARN_ON_ONCE like below trace because
request state was already set to MQ_RQ_IN_FLIGHT in virtio_queue_rqs()
despite the failure.
[ 1.890468] ------------[ cut here ]------------
[ 1.890776] WARNING: CPU: 2 PID: 122 at block/blk-mq.c:1143
blk_mq_start_request+0x8a/0xe0
[ 1.891045] Modules linked in:
[ 1.891250] CPU: 2 PID: 122 Comm: journal-offline Not tainted 5.19.0+ #44
[ 1.891504] Hardware name: ChromiumOS crosvm, BIOS 0
[ 1.891739] RIP: 0010:blk_mq_start_request+0x8a/0xe0
[ 1.891961] Code: 12 80 74 22 48 8b 4b 10 8b 89 64 01 00 00 8b 53
20 83 fa ff 75 08 ba 00 00 00 80 0b 53 24 c1 e1 10 09 d1 89 48 34 5b
41 5e c3 <0f> 0b eb b8 65 8b 05 2b 39 b6 7e 89 c0 48 0f a3 05 39 77 5b
01 0f
[ 1.892443] RSP: 0018:ffffc900002777b0 EFLAGS: 00010202
[ 1.892673] RAX: 0000000000000000 RBX: ffff888004bc0000 RCX: 0000000000000000
[ 1.892952] RDX: 0000000000000000 RSI: ffff888003d7c200 RDI: ffff888004bc0000
[ 1.893228] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff888004bc0100
[ 1.893506] R10: ffffffffffffffff R11: ffffffff8185ca10 R12: ffff888004bc0000
[ 1.893797] R13: ffffc90000277900 R14: ffff888004ab2340 R15: ffff888003d86e00
[ 1.894060] FS: 00007ffa143a4640(0000) GS:ffff88807dd00000(0000)
knlGS:0000000000000000
[ 1.894412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.894682] CR2: 00005648577d9088 CR3: 00000000053da004 CR4: 0000000000170ee0
[ 1.894953] Call Trace:
[ 1.895139] <TASK>
[ 1.895303] virtblk_prep_rq+0x1e5/0x280
[ 1.895509] virtio_queue_rq+0x5c/0x310
[ 1.895710] ? virtqueue_add_sgs+0x95/0xb0
[ 1.895905] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 1.896133] ? virtio_queue_rqs+0x340/0x390
[ 1.896453] ? sbitmap_get+0xfa/0x220
[ 1.896678] __blk_mq_issue_directly+0x41/0x180
[ 1.896906] blk_mq_plug_issue_direct+0xd8/0x2c0
[ 1.897115] blk_mq_flush_plug_list+0x115/0x180
[ 1.897342] blk_add_rq_to_plug+0x51/0x130
[ 1.897543] blk_mq_submit_bio+0x3a1/0x570
[ 1.897750] submit_bio_noacct_nocheck+0x418/0x520
[ 1.897985] ? submit_bio_noacct+0x1e/0x260
[ 1.897989] ext4_bio_write_page+0x222/0x420
[ 1.898000] mpage_process_page_bufs+0x178/0x1c0
[ 1.899451] mpage_prepare_extent_to_map+0x2d2/0x440
[ 1.899603] ext4_writepages+0x495/0x1020
[ 1.899733] do_writepages+0xcb/0x220
[ 1.899871] ? __seccomp_filter+0x171/0x7e0
[ 1.900006] file_write_and_wait_range+0xcd/0xf0
[ 1.900167] ext4_sync_file+0x72/0x320
[ 1.900308] __x64_sys_fsync+0x66/0xa0
[ 1.900449] do_syscall_64+0x31/0x50
[ 1.900595] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 1.900747] RIP: 0033:0x7ffa16ec96ea
[ 1.900883] Code: b8 4a 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3
48 83 ec 18 89 7c 24 0c e8 e3 02 f8 ff 8b 7c 24 0c 89 c2 b8 4a 00 00
00 0f 05 <48> 3d 00 f0 ff ff 77 36 89 d7 89 44 24 0c e8 43 03 f8 ff 8b
44 24
[ 1.901302] RSP: 002b:00007ffa143a3ac0 EFLAGS: 00000293 ORIG_RAX:
000000000000004a
[ 1.901499] RAX: ffffffffffffffda RBX: 0000560277ec6fe0 RCX: 00007ffa16ec96ea
[ 1.901696] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000016
[ 1.901884] RBP: 0000560277ec5910 R08: 0000000000000000 R09: 00007ffa143a4640
[ 1.902082] R10: 00007ffa16e4d39e R11: 0000000000000293 R12: 00005602773f59e0
[ 1.902459] R13: 0000000000000000 R14: 00007fffbfc007ff R15: 00007ffa13ba4000
[ 1.902763] </TASK>
[ 1.902877] ---[ end trace 0000000000000000 ]---
To avoid calling blk_mq_start_request() twice, This patch moves the
execution of blk_mq_start_request() to the end of virtblk_prep_rq().
And instead of requeuing failed request to plug list in the error path of
virtblk_add_req_batch(), it uses blk_mq_requeue_request() to change failed
request state to MQ_RQ_IDLE. Then virtblk can safely handle the request
on the next trial.
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Reported-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220830150153.12627-1-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
|
|
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
|
|
hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is
freed on suspend and reallocated on resume. So, hctx->user_data is
invalid after resume, and it will cause use-after-free accessing which
will result in the kernel crash something like below:
[ 22.428391] Call Trace:
[ 22.428899] <TASK>
[ 22.429339] virtqueue_add_split+0x3eb/0x620
[ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0
[ 22.430789] ? kvm_clock_get_cycles+0x14/0x30
[ 22.431496] virtqueue_add_sgs+0xad/0xd0
[ 22.432108] virtblk_add_req+0xe8/0x150
[ 22.432692] virtio_queue_rqs+0xeb/0x210
[ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280
[ 22.434059] __blk_flush_plug+0xe1/0x140
[ 22.434853] blk_finish_plug+0x20/0x40
[ 22.435512] read_pages+0x20a/0x2e0
[ 22.436063] ? folio_add_lru+0x62/0xa0
[ 22.436652] page_cache_ra_unbounded+0x112/0x160
[ 22.437365] filemap_get_pages+0xe1/0x5b0
[ 22.437964] ? context_to_sid+0x70/0x100
[ 22.438580] ? sidtab_context_to_sid+0x32/0x400
[ 22.439979] filemap_read+0xcd/0x3d0
[ 22.440917] xfs_file_buffered_read+0x4a/0xc0
[ 22.441984] xfs_file_read_iter+0x65/0xd0
[ 22.442970] __kernel_read+0x160/0x2e0
[ 22.443921] bprm_execve+0x21b/0x640
[ 22.444809] do_execveat_common.isra.0+0x1a8/0x220
[ 22.446008] __x64_sys_execve+0x2d/0x40
[ 22.446920] do_syscall_64+0x37/0x90
[ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes this issue by getting vq from vblk, and removes
virtblk_init_hctx().
Fixes: 4e0400525691 ("virtio-blk: support polling I/O")
Cc: "Suwan Kim" <suwan.kim027@gmail.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Message-Id: <20220810160948.959781-1-syoshida@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch supports mq_ops->queue_rqs() hook. It has an advantage of
batch submission to virtio-blk driver. It also helps polling I/O because
polling uses batched completion of block layer. Batch submission in
queue_rqs() can boost polling performance.
In queue_rqs(), it iterates plug->mq_list, collects requests that
belong to same HW queue until it encounters a request from other
HW queue or sees the end of the list.
Then, virtio-blk adds requests into virtqueue and kicks virtqueue
to submit requests.
If there is an error, it inserts error request to requeue_list and
passes it to ordinary block layer path.
For verification, I did fio test.
(io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N)
I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times.
It shows about 2% improvement.
| numjobs=2 | numjobs=4
-----------------------------------------------------------
fio without queue_rqs() | 291K IOPS | 238K IOPS
-----------------------------------------------------------
fio with queue_rqs() | 295K IOPS | 243K IOPS
For polling I/O performance, I also did fio test as below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4)
I set 4 vcpu and 2 poll queues for VM.
It shows about 2% improvement in polling I/O.
| IOPS | avg latency
-----------------------------------------------------------
fio poll without queue_rqs() | 424K | 613.05 usec
-----------------------------------------------------------
fio poll with queue_rqs() | 435K | 601.01 usec
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
This patch supports polling I/O via virtio-blk driver. Polling
feature is enabled by module parameter "poll_queues" and it sets
dedicated polling queues for virtio-blk. This patch improves the
polling I/O throughput and latency.
The virtio-blk driver doesn't not have a poll function and a poll
queue and it has been operating in interrupt driven method even if
the polling function is called in the upper layer.
virtio-blk polling is implemented upon 'batched completion' of block
layer. virtblk_poll() queues completed request to io_comp_batch->req_list
and later, virtblk_complete_batch() calls unmap function and ends
the requests in batch.
virtio-blk reads the number of poll queues from module parameter
"poll_queues". If VM sets queue parameter as below,
("num-queues=N" [QEMU property], "poll_queues=M" [module parameter])
It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)]
as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default
queues, the poll queues have no callback function.
Regarding HW-SW queue mapping, the default queue mapping uses the
existing method that condsiders MSI irq vector. But the poll queue
doesn't have an irq, so it uses the regular blk-mq cpu mapping.
For verifying the improvement, I did Fio polling I/O performance test
with io_uring engine with the options below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N)
I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll
queues for VM.
As a result, IOPS and average latency improved about 10%.
Test result:
- Fio io_uring poll without virtio-blk poll support
-- numjobs=1 : IOPS = 339K, avg latency = 188.33us
-- numjobs=2 : IOPS = 367K, avg latency = 347.33us
-- numjobs=4 : IOPS = 383K, avg latency = 682.06us
- Fio io_uring poll with virtio-blk poll support
-- numjobs=1 : IOPS = 385K, avg latency = 165.94us
-- numjobs=2 : IOPS = 408K, avg latency = 313.28us
-- numjobs=4 : IOPS = 424K, avg latency = 613.05us
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
On the other hand the discard_sector_alignment from the virtio 1.1 looks
similar to what Linux uses as discard granularity (even if not very well
described):
"discard_sector_alignment can be used by OS when splitting a request
based on alignment. "
And at least qemu does set it to the discard granularity.
So stop setting the discard_alignment and use the virtio
discard_sector_alignment to set the discard granularity.
Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: e467cde23818 ("Block driver using virtio.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220316192010.19001-2-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we have a BUG_ON() to make sure the number of sg
list does not exceed queue_max_segments() in virtio_queue_rq().
However, the block layer uses queue_max_discard_segments()
instead of queue_max_segments() to limit the sg list for
discard requests. So the BUG_ON() might be triggered if
virtio-blk device reports a larger value for max discard
segment than queue_max_segments(). To fix it, let's simply
remove the BUG_ON() which has become unnecessary after commit
02746e26c39e("virtio-blk: avoid preallocating big SGL for data").
And the unused vblk->sg_elems can also be removed together.
Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20220304100058.116-2-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the value of max_discard_segment will be set to
MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device
set 0 to max_discard_seg in configuration space. It's incorrect
since the device might not be able to handle such large descriptors.
To fix it, let's follow max_segments restrictions in this case.
Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Implement the ->free_disk method to free the virtio_blk structure only
once the last gendisk reference goes away instead of keeping a local
refcount.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220215094514.3828912-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
|
|
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now. Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This was found by coccicheck:
./drivers/block/virtio_blk.c, 334, 14-17, WARNING Unsigned expression
compared with zero num < 0
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211117063955.160777-1-ye.guojin@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 02746e26c39e ("virtio-blk: avoid preallocating big SGL for data")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This reverts commit a40392edf1b2c7822bc0ce68413106661a9d4232.
Attempts to validate length in the core did not work out.
We'll drop them, so revert the dependent changes in drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
|
|
git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
|
|
We never tries to use used length, so the patch prevents the virtio
core from validating used length.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtblk_setup_cmd returns blk_status_t in an int, callers then assign it
back to a blk_status_t variable. blk_status_t is either u32 or (more
typically) u8 so it works, but is inelegant and causes sparse warnings.
Pass the status in blk_status_t in a consistent way.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b2c5221fd074 ("virtio-blk: avoid preallocating big SGL for data")
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The default value is 0 meaning "no limit". However if 0
is specified on the command line it is instead silently
converted to 1. Further, the value is already validated
at point of use, there's no point in duplicating code
validating the value when it is set.
Simplify the code while making the behaviour more consistent
by using plain module_param.
Fixes: 1a662cf6cb9a ("virtio-blk: add num_request_queues module parameter")
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211021065111.1047824-1-ye.guojin@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211025102240.22801-1-colin.i.king@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
If an untrusted device neogitates BLK_F_MQ but advertises a zero
num_queues, the driver may end up trying to allocating zero size
buffers where ZERO_SIZE_PTR is returned which may pass the checking
against the NULL. This will lead unexpected results.
Fixing this by failing the probe in this case.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Sometimes a user would like to control the amount of request queues to
be created for a block device. For example, for limiting the memory
footprint of virtio-blk devices.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210902204622.54354-1-mgurtovoy@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
No need to pre-allocate a big buffer for the IO SGL anymore. If a device
has lots of deep queues, preallocation for the sg list can consume
substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
can be 64 or 128 and each queue's depth might be 128. This means the
resulting preallocation for the data SGLs is big.
Switch to runtime allocation for SGL for lists longer than 2 entries.
This is the approach used by NVMe drivers so it should be reasonable for
virtio block as well. Runtime SGL allocation has always been the case
for the legacy I/O path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
Re-organize the setup of the IO request to fit the new sg chain
mechanism.
No performance degradation was seen (fio libaio engine with 16 jobs and
128 iodepth):
IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after)
-------- --------------------------------- ----------------------------------
512B 318K/316K 329K/325K
4KB 323K/321K 353K/349K
16KB 199K/208K 250K/275K
128KB 36K/36.1K 39.2K/41.7K
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.com
Reviewed-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # kconfig fixups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:
[ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[ 506.174302] Call Trace:
[ 506.174651] create_page_buffers+0x4d/0x60
[ 506.175207] block_read_full_page+0x50/0x380
[ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0
[ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390
[ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0
[ 506.177644] ? scan_shadow_nodes+0x30/0x30
[ 506.178206] ? lru_cache_add+0x42/0x60
[ 506.178716] do_read_cache_page+0x695/0x740
[ 506.179278] ? read_part_sector+0xe0/0xe0
[ 506.179821] read_part_sector+0x36/0xe0
[ 506.180337] adfspart_check_ICS+0x32/0x320
[ 506.180890] ? snprintf+0x45/0x70
[ 506.181350] ? read_part_sector+0xe0/0xe0
[ 506.181906] bdev_disk_changed+0x229/0x5c0
[ 506.182483] blkdev_get_whole+0x6d/0x90
[ 506.183013] blkdev_get_by_dev+0x122/0x2d0
[ 506.183562] device_add_disk+0x39e/0x3c0
[ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk]
[ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio]
So let's use a block layer helper to validate the block size.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It turns out that access to config space before completing the feature
negotiation is broken for big endian guests at least with QEMU hosts up
to 6.1 inclusive. This affects any device that accesses config space in
the validate callback: at the moment that is virtio-net with
VIRTIO_NET_F_MTU but since 82e89ea077b9 ("virtio-blk: Add validation for
block size in config space") that also started affecting virtio-blk with
VIRTIO_BLK_F_BLK_SIZE. Further, unlike VIRTIO_NET_F_MTU which is off by
default on QEMU, VIRTIO_BLK_F_BLK_SIZE is on by default, which resulted
in lots of people not being able to boot VMs on BE.
The spec is very clear that what we are doing is legal so QEMU needs to
be fixed, but given it's been broken for so many years and no one
noticed, we need to give QEMU a bit more time before applying this.
Further, this patch is incomplete (does not check blk size is a power
of two) and it duplicates the logic from nbd.
Revert for now, and we'll reapply a cleaner logic in the next release.
Cc: stable@vger.kernel.org
Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space")
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
|
|
Usually we use "likely/unlikely" to optimize the fast path. Remove
redundant "likely/unlikely" statements in the control path to simplify
the code and make it easier to read.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210905085717.7427-1-mgurtovoy@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|
|
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210818144542.19305-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use bvec_virt instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20210804095634.460779-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
An untrusted device might presents an invalid block size
in configuration space. This tries to add validation for it
in the validate callback and clear the VIRTIO_BLK_F_BLK_SIZE
feature bit if the value is out of the supported range.
And we also double check the value in virtblk_probe() in
case that it's changed after the validation.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210809101609.148-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The struct virtio_blk_config seg_max value is read from the device and
incremented by 2 to account for the request header and status byte
descriptors added by the driver.
In preparation for supporting untrusted virtio-blk devices, protect
against integer overflow and limit the value to a safe maximum.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20210524154020.98195-1-stefanha@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vblk->vqs should be freed before we call init_vqs()
in virtblk_restore().
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210517084332.280-1-xieyongji@bytedance.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
